Falcon Cycles is a British bicycle manufacturer which was based in Brigg, North Lincolnshire, owned by Tandem Group.
Triumph Engineering Co Ltd was a British motorcycle manufacturing company, based originally in Coventry and then in Meriden. A new company, Triumph Motorcycles Ltd, based in Hinckley, gained the name rights after the end of the company in the 1980s and is now one of the world's major motorcycle manufacturers.
Royal Enfield was a brand name under which The Enfield Cycle Company Limited of Redditch, Worcestershire, England, sold motorcycles, bicycles, lawnmowers and stationary engines which it manufactured. Enfield Cycle Company also used the brand name "Enfield" without the "Royal". Later in 1994, Eicher Motors an Indian multinational automobile manufacturing company took over the company's full ownership.
A motorized bicycle is a bicycle with an attached motor or engine and transmission used either to power the vehicle unassisted, or to assist with pedalling. Since it sometimes retains both pedals and a discrete connected drive for rider-powered propulsion, the motorized bicycle is in technical terms a true bicycle, albeit a power-assisted one. Typically they are incapable of speeds above 52 km/h (32 mph); however, in recent years larger motors have been built, allowing bikes to reach speeds of upwards of 113 km/h.
Norman Cycles was a British bicycle, autocycle, moped, and motorcycle manufacturer in Ashford, Kent, England.
The James Cycle Co Ltd., Greet, Birmingham, England, was one of many British cycle and motorcycle makers based in the English Midlands, particularly Birmingham. Most of their light motorcycles, often with the characteristic maroon finish, used Villiers and, later, AMC two-stroke engines.
Villiers Engineering was a manufacturer of motorcycles and cycle parts, and an engineering company based in Villiers Street, Wolverhampton, England.
Sparta B.V. is a Dutch bicycle manufacturer based in Apeldoorn that also produced motorcycles and Mopeds. It is the largest electrical bike manufacturer in Europe.
Tempo was a Norwegian motorcycle and moped brand. Jonas Øglænd made the rolling chassis and most of the parts thereof, and Fichtel & Sachs AG made the engines for the majority of the models. After 1972 the company made mopeds only.
Batavus BV is a Dutch bicycle manufacturer, owned by the Accell Group European Cycle conglomerate. Batavus Intercycle Corporation was the leading manufacturer of bicycles and mopeds in the Netherlands during the 1970s. During its most productive years, the company's 350,000 sq ft (33,000 m2). Heerenveen plant employed 700 to produce 70,000 Batavus mopeds and 250,000 bicycles a year. During this time, Batavus was exporting 55 percent of its production with the remainder going to the Netherlands, which had more than two million mopeds in 1977.
Francis & Barnett Limited was an English motorcycle manufacturer founded in 1919 by Gordon Inglesby Francis and Arthur Barnett and based in Lower Ford Street, Coventry, England. Early motor cycles were affectionately known as ' Franny B'. Motorcycles were produced for enthusiasts and were reasonably affordable for citizens for use as general transport. The majority of the lighter motorcycles used Villiers and later Two-stroke engine and later Associated Motor Cycles AMC engines. During the 1930s the 250cc Cruiser model 250 cc (15 cu in) was developed with a faired engine that protected those riding from any oil or dirt – one of the first of its kind to do so. AMC took over Francis & Barnett Limited in 1947 combining this with the James motorcycle models in 1957. The combined company remained in business until 1966.
Coventry-Eagle was a British bicycle and motorcycle manufacturer. Established as a Victorian bicycle maker, the company began under the name of Hotchkiss, Mayo & Meek. The company name was changed to Coventry Eagle in 1897 when John Meek left the company. By 1898 they had begun to experiment with motorised vehicles and by 1899, had produced their first motorcycle. The motorcycles were hand built from components and finished carefully, Coventry-Eagle motorcycles proved reliable and by the First World War the range included Villiers Engineering and JAP engines.
Dunelt Motorcycles was a British motorcycle and bicycle manufacturer. Based in Sheffield, the business was founded by two steel makers and engineers, Dunford and Elliott of Sheffield in 1919. Their first motorcycle was an innovative supercharged 499 cc two-stroke single. The company specialised in good quality sidecars from 1926 and a Dunelt motorcycle was first to cross the desert from Cairo to Siwa and back in 1924. Dunelt also enjoyed racing success and won the Double Twelve Hour World Record at Brooklands with a Model K in 1928. Dunelt moved into commercial three-wheeled cars but these were not a success. A Dunelt moped was exhibited at the Earls Court show in 1956 but the company diversified into other areas of engineering in 1957.
New Hudson Motorcycles was a British motorcycle manufacturer. Founded in 1903 by George Patterson in Birmingham, their first motorcycle was produced in 1902 but was unsuccessful. The New Hudson range expanded between 1910 and 1915 using JAP engines, then the factory joined the war effort until 1919. As well as side-valve and OHV single-cylinder engines of 350 to 600 cc, they also built a 211 cc two-stroke and a number of three-wheelers with MAG engines. In 1927 Bert le Vack broke the 100 miles per hour (160 km/h) record at Brooklands on a 500 cc New Hudson.
The Ruby Cycle Co Ltd. was a British motorcycle manufacturer based in Ancoats Manchester. Founded in 1909 the factory produced a range of motorcycles under the Royal Ruby brand until 1932.
The James Autocycle was a 98 cc (6.0 cu in) two-stroke, autocycle manufactured by the James Cycle Co from 1946 to 1953.
The James Comet was a 98 cubic centimetre (cc), two-stroke, motorcycle manufactured by the James Cycle Co. and announced on 21 October 1948. A post-World War II design, the Comet went into production in late 1948.
Prophete In Moving GmbH is a German manufacturer for bicycles, e-bikes, scooters, and supply parts that traditionally trade under the Prophete keep moving brand name.
BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.
The Bown Manufacturing Company was established in 1862 in Birmingham by local machinist, William Bown, making a variety of patented mechanical parts. The name Aeolus had been used as a trademark since 1877 and especially for cycle parts. A second-cousin took over the company when the founder died in 1900 and began making powered-cycles also under the Aeolus brand. Production was interrupted by the First World War, after which motorcycles were marketed under the Bown brand until 1924. The company was subsequently acquired by the Aberdale Cycle Company in the 1930s.
