EMC Motorcycles

Last updated

EMC Motorcycles
IndustryManufacturing and engineering
Founded1946
Defunct1977
FateWound up
Headquarters Isleworth, UK
Key people
Dr Joseph Ehrlich
ProductsMotorcycles

EMC Motorcycles or the Ehrlich Motor Co was a British motorcycle manufacturer. Based in Isleworth, the business was founded by Joseph Ehrlich who emigrated to the United Kingdom from Austria in the 1930s. [1]

Contents

A specialist engine tuner, Joe Ehrlich made unique two-stroke motorcycles. EMC stopped mass production in 1952 but Ehrlich used his knowledge of German technology to re-engineer the DKW Rennsporte Ladempumpe production racers, which he developed as one-off EMC racing bikes and won several events over the next 25 years. [2] [ better source needed ][ better source needed ] The EMC 125 cc racer was considered among the fastest of its size in the early 1960s. Ehrlich left in 1967 and the company was wound up in 1977. [1]

History

Dr Joseph Ehrlich was a wealthy Austrian and keen motorcycle enthusiast who became the acknowledged authority on two-stroke single racing bikes. Ehrlich moved to the UK and set up EMC after the Second World War with a factory at Isleworth. Production focused on a 350 cc split-single motorcycle based on German engineering using two cylinders and pistons with a common combustion chamber. One cylinder housed the exhaust ports and the other the transfer ports. EMC also imported Puch 125 cc split-single, four-speed engines from Austria as there was nothing to compete in the UK market at the time. [2]

EMC Twin 1950 EMC Twin 1950.jpg
EMC Twin 1950

Dr Ehrlich worked throughout his life to improve engine performance. In 1948 he built a three-cylinder motorcycle engine that was banned from racing circuits as "too powerful". [3] EMC racing motorcycles (and cars) were used by some of the leading riders, including Mike Hailwood who rode an EMC to fifth place in the 1962 125 cc world championship and won the 1962 Saar Grand Prix. [4] [5] [ failed verification ][ failed verification ] From 1981, 250 cc EMC motorcycles won 4 Junior TTs at the Isle of Man and an EMC was the first 250 cc motorcycle to break the 110 miles per hour (180 km/h) lap record. [6] Ehrlich went on to develop Formula 3 racing cars and although he retired from EMC in 1967 his interest in racing motorcycles continued and he produced one-off 250 cc Rotax-engined bikes in the 1980s and his last competitive motorcycle in 1995 – when he was in his 80s. [7] [8]

Ehrlich's experience with early two-stroke designs led to work on the 'Environmental Engine' that had variable compression and variable capacity to improve emission and fuel consumption. Potentially the future of engine technology, Josef Ehrlich died in September 2003 aged 89 without seeing his engine designs developed commercially. [3]

Models

ModelYearNotes
EMC 350 cc1948Split single cylinder
EMC Model T1953Jap engine
EMC 125 cc1963Water-cooled twin

See also

Related Research Articles

<span class="mw-page-title-main">Aprilia</span> Italian motorcycle manufacturer

Aprilia is an Italian motorcycle manufacturer founded immediately after World War II in Noale, Italy, by Alberto Beggio. The company started as a manufacturer of bicycles and moved on to manufacture scooters and small-capacity motorcycles. In more recent times Aprilia has produced large sportbikes such as the 1,000 cc V-twin RSV Mille and the V4 RSV4.

<span class="mw-page-title-main">MZ Motorrad- und Zweiradwerk</span> German motorcycle manufacturer

Motorenwerke Zschopau GmbH is a German motorcycle manufacturer located in Zschopau, Saxony. The acronym MZ since 1956 stands for Motorenwerke Zschopau GmbH. From 1992 to 1999 the company was called MuZ, an acronym for Motorrad und Zweiradwerk.

<span class="mw-page-title-main">KTM</span> Austrian motorcycle and sports car manufacturer

KTM is an Austrian motorcycle, bicycle and motorsports brand which traces its foundation in 1934 as Kronreif & Trunkenpolz Mattighofen. Today, Pierer Mobility AG operates as the manufacturer of KTM branded motorcycles; whereas KTM Fahrrad AG operates as the manufacturer of KTM branded bicycles.

<span class="mw-page-title-main">Motocross</span> Off-road motorcycle racing held on enclosed off-road circuits

Motocross is a form of off-road motorcycle racing held on enclosed off-road circuits. The sport evolved from motorcycle trials competitions held in the United Kingdom.

Yamaha Motor Co., Ltd. is a Japanese mobility manufacturer that produces motorcycles, motorboats, outboard motors, and other motorized products. The company was established in the year 1955 upon separation from Nippon Gakki Co., Ltd. and is headquartered in Iwata, Shizuoka, Japan. The company conducts development, production and marketing operations through 109 consolidated subsidiaries as of 2012.

<span class="mw-page-title-main">AJS</span> British automobile and motorcycle manufacturer from 1909 to 1931

A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles until 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.

<span class="mw-page-title-main">MV Agusta</span> Italian motorcycle manufacturer and racing team

MV Agusta is a high end motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in Cascina Costa, Italy. The abbreviation MV stands for Meccanica (mechanics) Verghera, the hamlet where the first MVs were made. The modern headquarters and main production facilities are located in Varese, Italy on the shore of Lake Varese.

<span class="mw-page-title-main">U engine</span>

A U engine is a piston engine made up of two separate straight engines placed side-by-side and coupled to a shared output shaft. When viewed from the front, the engine block resembles the letter "U".

<span class="mw-page-title-main">Bultaco</span> Spanish motorcycle manufacturer

Bultaco was a Spanish manufacturer of two-stroke motorcycles from 1958 to 1983.

<span class="mw-page-title-main">Motorcycle engine</span> Engine that powers a motorcycle

A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.

<span class="mw-page-title-main">Honda NR</span> Type of motorcycle

The Honda NR was a V-four motorcycle series started by Honda in 1979 with the 500cc NR500 Grand Prix racer that used oval pistons. This was followed during the 1980s by a 750cc endurance racer version known as the NR750. The oval piston concept allowed for eight valves per cylinder which generated more power due to the increased air/fuel mixture and throughout compression. In 1992 Honda produced around 300 street versions of a 750cc model, the NR, with a 90-degree V angle. Whereas the NR500 had used an oval piston with straight sides, the road going NR750 used an elliptical piston with curved long sides. The bike became the most expensive production bike at the time when it was selling for $50,000 and with the rarity, nowadays they rarely change hands.

<span class="mw-page-title-main">Garelli Motorcycles</span> Italian motorcycle company

Garelli Motorcycles was an Italian moped and motorcycle manufacturer. It was founded in 1919 by Adalberto Garelli.

<span class="mw-page-title-main">Ducati singles</span> Ducati motorcycle made from 1950 to 1974

The Ducati singles were single cylinder motorcycles, made by Ducati from 1950 to 1974. Chief Engineer Fabio Taglioni developed a desmodromic valve system in these years, a system that opens and closes the valves using the camshaft, without the need for valve springs. This valve system has become a trademark feature of Ducati motorcycles.

FN is a Belgian company established in 1889 to make arms and ammunition, and from 1901 to 1967 was also a motorcycle manufacturer. FN manufactured one of the world's first four-cylinder motorcycles, was famous for the use of shaft drive in all models from 1903 to 1923, achieved success in sprint and long-distance motorcycle racing, and after 1945, also in motocross.

<span class="mw-page-title-main">50 cc Grand Prix motorcycle racing</span>

The 50 cc class was the ultra-lightweight class in Grand Prix motorcycle racing, and formed part of the Fédération Internationale de Motocyclisme (FIM) World Championships from 1962 until 1983; when the class was replaced by 80 cc.

<span class="mw-page-title-main">Husqvarna Motorcycles</span> Swedish motorcycle manufacturer

Husqvarna Motorcycles GmbH is an Austrian company which designs, engineers, manufactures and distributes motocross, enduro, supermoto and street motorcycles.

<span class="mw-page-title-main">Megelli Motorcycles</span> British motorcycle manufacturer

Megelli Motorcycles was a British motorcycle manufacturer, which made its debut at the Milan EICMA exhibition in November 2007. Megelli motorcycles was founded by the Managing Director of Sports and Leisure Direct UK Ltd, Barry Hall, who previously specialised in off-road Aeon all-terrain vehicles, mini bikes and pit bikes. The Megelli range is currently sold in 37 countries in Europe, Asia, Australia, Africa, North America and South America.

<span class="mw-page-title-main">Phil Irving</span>

Philip Edward Irving MBE, CEng., FIMechE., MSAE. (1903–1992) was an Australian engineer and author, most famous for the Repco-Brabham Formula One and Vincent motorcycle engines. He also worked at Velocette motorcycles, twice, and drew the engine of the 1960 EMC 125cc racer.

<span class="mw-page-title-main">Split-single engine</span> Type of two-stroke internal combustion engine

In internal combustion engines, a split-single design is a type of two-stroke where two cylinders share a single combustion chamber.

<span class="mw-page-title-main">Meguro motorcycles</span> Japanese motorcycle brand

Meguro motorcycles were built by Meguro Manufacturing Co motorcycle works (目黒製作所), founded by Nobuji Murata and a high-ranking naval officer, Takaji Suzuki, in 1937. One of the first Japanese motorcycle companies, it became a partner of Kawasaki Heavy Industries Ltd, and was eventually absorbed. Named after a district of Tokyo, Meguro had its roots in Murato Iron Works, which was established in 1924. Meguro Seisakusho, which had once developed a copy of a Harley-Davidson V-twin, was established to design and build gearboxes for the nascent Japanese motorcycle industry. Abe Industries, which had once produced its own motorcycle, merged with Meguro in 1931. The brand is being revived by Kawasaki with a new K3 model to be introduced in Japan on February 1, 2021.

References

  1. 1 2 "EMC Motorcycles" . Retrieved 5 July 2008.
  2. 1 2 Hogan, Peter (30 November 2002). "Racing Split Single Two Stroke Motorcycles in Post War England". Archived from the original on 16 June 2008. Retrieved 5 July 2008.
  3. 1 2 "History of EE technology". Archived from the original on 18 July 2008. Retrieved 5 July 2008.
  4. "1962 125cc world championship standings". motogp.com. Archived from the original on 27 September 2012. Retrieved 15 June 2011.
  5. "Works EMC bikes on the auction block" . Retrieved 5 July 2008.
  6. "TT Race analysis" . Retrieved 5 July 2008.
  7. "Ehrlich EMC" . Retrieved 5 July 2008.
  8. Brown, Roland (2002). Classic Motorcycles. Anness Publishing. p. 137. ISBN   1-84038-433-6.