Oloid

Last updated
Oloid structure, showing the two 240 degree circular sectors and the convex hull. Oloid structure.svg
Oloid structure, showing the two 240 degree circular sectors and the convex hull.
The plane shape of a developed Oloid surface Oloid development.svg
The plane shape of a developed Oloid surface

An oloid is a three-dimensional curved geometric object that was discovered by Paul Schatz in 1929. It is the convex hull of a skeletal frame made by placing two linked congruent circles in perpendicular planes, so that the center of each circle lies on the edge of the other circle. The distance between the circle centers equals the radius of the circles. One third of each circle's perimeter lies inside the convex hull, so the same shape may be also formed as the convex hull of the two remaining circular arcs each spanning an angle of 4π/3.

Contents

Surface area and volume

The surface area of an oloid is given by: [1]

exactly the same as the surface area of a sphere with the same radius. In closed form, the enclosed volume is [1] [2]

,

where and denote the complete elliptic integrals of the first and second kind respectively. A numerical calculation gives

.

Kinetics

The surface of the oloid is a developable surface, meaning that patches of the surface can be flattened into a plane. While rolling, it develops its entire surface: every point of the surface of the oloid touches the plane on which it is rolling, at some point during the rolling movement. [1] Unlike most axial symmetric objects (cylinder, sphere etc.), while rolling on a flat surface, its center of mass performs a meander motion rather than a linear one. In each rolling cycle, the distance between the oloid's center of mass and the rolling surface has two minima and two maxima. The difference between the maximum and the minimum height is given by

,

where is the oloid's circular arcs radius. Since this difference is fairly small, the oloid's rolling motion is relatively smooth.

At each point during this rolling motion, the oloid touches the plane in a line segment. The length of this segment stays unchanged throughout the motion, and is given by: [1] [3]

.
Comparison of an oloid (left) and sphericon (right) -- in the SVG image, move over the image to rotate the shapes Comparison oloid sphericon 3D.svg
Comparison of an oloid (left) and sphericon (right) in the SVG image, move over the image to rotate the shapes

The sphericon is the convex hull of two semicircles on perpendicular planes, with centers at a single point. Its surface consists of the pieces of four cones. It resembles the oloid in shape and, like it, is a developable surface that can be developed by rolling. However, its equator is a square with four sharp corners, unlike the oloid which does not have sharp corners.

Another object called the two circle roller is defined from two perpendicular circles for which the distance between their centers is √2 times their radius, farther apart than the oloid. It can either be formed (like the oloid) as the convex hull of the circles, or by using only the two disks bounded by the two circles. Unlike the oloid its center of gravity stays at a constant distance from the floor, so it rolls more smoothly than the oloid.[ citation needed ]

In 1979, modern dancer Alan Boeding designed his "Circle Walker" sculpture from two crosswise semicircles, forming a skeletal version of the sphericon, a shape with a similar rolling motion to the oloid. He began dancing with a scaled-up version of the sculpture in 1980 as part of an MFA program in sculpture at Indiana University, and after he joined the MOMIX dance company in 1984 the piece became incorporated into the company's performances. [4] [5] The company's later piece "Dream Catcher" is based around another Boeding sculpture whose linked teardrop shapes incorporate the skeleton and rolling motion of the oloid. [6]

Related Research Articles

<span class="mw-page-title-main">Horizon</span> Apparent curve that separates earth from sky

The horizon is the apparent curve that separates the surface of a celestial body from its sky when viewed from the perspective of an observer on or near the surface of the relevant body. This curve divides all viewing directions based on whether it intersects the relevant body's surface or not.

<span class="mw-page-title-main">Equilateral triangle</span> Shape with three equal sides

In geometry, an equilateral triangle is a triangle in which all three sides have the same length. In the familiar Euclidean geometry, an equilateral triangle is also equiangular; that is, all three internal angles are also congruent to each other and are each 60°. It is also a regular polygon, so it is also referred to as a regular triangle.

<span class="mw-page-title-main">Rhombus</span> Quadrilateral with sides of equal length

In plane Euclidean geometry, a rhombus is a quadrilateral whose four sides all have the same length. Another name is equilateral quadrilateral, since equilateral means that all of its sides are equal in length. The rhombus is often called a "diamond", after the diamonds suit in playing cards which resembles the projection of an octahedral diamond, or a lozenge, though the former sometimes refers specifically to a rhombus with a 60° angle, and the latter sometimes refers specifically to a rhombus with a 45° angle.

<span class="mw-page-title-main">Cyclic quadrilateral</span> Quadrilateral whose vertices can all fall on a single circle

In Euclidean geometry, a cyclic quadrilateral or inscribed quadrilateral is a quadrilateral whose vertices all lie on a single circle. This circle is called the circumcircle or circumscribed circle, and the vertices are said to be concyclic. The center of the circle and its radius are called the circumcenter and the circumradius respectively. Other names for these quadrilaterals are concyclic quadrilateral and chordal quadrilateral, the latter since the sides of the quadrilateral are chords of the circumcircle. Usually the quadrilateral is assumed to be convex, but there are also crossed cyclic quadrilaterals. The formulas and properties given below are valid in the convex case.

<span class="mw-page-title-main">Poincaré half-plane model</span> Upper-half plane model of hyperbolic non-Euclidean geometry

In non-Euclidean geometry, the Poincaré half-plane model is the upper half-plane, denoted below as H, together with a metric, the Poincaré metric, that makes it a model of two-dimensional hyperbolic geometry.

<span class="mw-page-title-main">5-cell</span> Four-dimensional analogue of the tetrahedron

In geometry, the 5-cell is the convex 4-polytope with Schläfli symbol {3,3,3}. It is a 5-vertex four-dimensional object bounded by five tetrahedral cells. It is also known as a C5, pentachoron, pentatope, pentahedroid, or tetrahedral pyramid. It is the 4-simplex (Coxeter's polytope), the simplest possible convex 4-polytope, and is analogous to the tetrahedron in three dimensions and the triangle in two dimensions. The 5-cell is a 4-dimensional pyramid with a tetrahedral base and four tetrahedral sides.

<span class="mw-page-title-main">Curvilinear perspective</span>

Curvilinear perspective, also five-point perspective, is a graphical projection used to draw 3D objects on 2D surfaces. It was formally codified in 1968 by the artists and art historians André Barre and Albert Flocon in the book La Perspective curviligne, which was translated into English in 1987 as Curvilinear Perspective: From Visual Space to the Constructed Image and published by the University of California Press.

<span class="mw-page-title-main">Sphericon</span> Type of rollable 3D shape

In solid geometry, the sphericon is a solid that has a continuous developable surface with two congruent, semi-circular edges, and four vertices that define a square. It is a member of a special family of rollers that, while being rolled on a flat surface, bring all the points of their surface to contact with the surface they are rolling on. It was discovered independently by carpenter Colin Roberts in the UK in 1969, by dancer and sculptor Alan Boeding of MOMIX in 1979, and by inventor David Hirsch, who patented it in Israel in 1980.

<span class="mw-page-title-main">Reuleaux triangle</span> Curved triangle with constant width

A Reuleaux triangle is a curved triangle with constant width, the simplest and best known curve of constant width other than the circle. It is formed from the intersection of three circular disks, each having its center on the boundary of the other two. Constant width means that the separation of every two parallel supporting lines is the same, independent of their orientation. Because its width is constant, the Reuleaux triangle is one answer to the question "Other than a circle, what shape can a manhole cover be made so that it cannot fall down through the hole?"

<span class="mw-page-title-main">Semicircle</span> Geometric shape

In mathematics, a semicircle is a one-dimensional locus of points that forms half of a circle. It is a circular arc that measures 180°. It has only one line of symmetry.

<span class="mw-page-title-main">120-cell</span> Four-dimensional analog of the dodecahedron

In geometry, the 120-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol {5,3,3}. It is also called a C120, dodecaplex (short for "dodecahedral complex"), hyperdodecahedron, polydodecahedron, hecatonicosachoron, dodecacontachoron and hecatonicosahedroid.

<span class="mw-page-title-main">Cone</span> Geometric shape

A cone is a three-dimensional geometric shape that tapers smoothly from a flat base to a point called the apex or vertex.

<span class="mw-page-title-main">Rolling</span> Type of motion which combines translation and rotation with respect to a surface

Rolling is a type of motion that combines rotation and translation of that object with respect to a surface, such that, if ideal conditions exist, the two are in contact with each other without sliding.

<span class="mw-page-title-main">Ultraparallel theorem</span> Theorem in hyperbolic geometry

In hyperbolic geometry, two lines are said to be ultraparallel if they do not intersect and are not limiting parallel.

<span class="mw-page-title-main">Lambert azimuthal equal-area projection</span> Azimuthal equal-area map projection

The Lambert azimuthal equal-area projection is a particular mapping from a sphere to a disk. It accurately represents area in all regions of the sphere, but it does not accurately represent angles. It is named for the Swiss mathematician Johann Heinrich Lambert, who announced it in 1772. "Zenithal" being synonymous with "azimuthal", the projection is also known as the Lambert zenithal equal-area projection.

<span class="mw-page-title-main">Ideal triangle</span> Type of hyperbolic triangle

In hyperbolic geometry an ideal triangle is a hyperbolic triangle whose three vertices all are ideal points. Ideal triangles are also sometimes called triply asymptotic triangles or trebly asymptotic triangles. The vertices are sometimes called ideal vertices. All ideal triangles are congruent.

<span class="mw-page-title-main">Circle packing</span> Field of geometry closely arranging circles on a plane

In geometry, circle packing is the study of the arrangement of circles on a given surface such that no overlapping occurs and so that no circle can be enlarged without creating an overlap. The associated packing density, η, of an arrangement is the proportion of the surface covered by the circles. Generalisations can be made to higher dimensions – this is called sphere packing, which usually deals only with identical spheres.

<span class="mw-page-title-main">Pentagon</span> Shape with five sides

In geometry, a pentagon is any five-sided polygon or 5-gon. The sum of the internal angles in a simple pentagon is 540°.

<span class="mw-page-title-main">Developable roller</span> Convex solid with a continuous, developable surface

In geometry, a developable roller is a convex solid whose surface consists of a single continuous, developable face. While rolling on a plane, most developable rollers develop their entire surface so that all the points on the surface touch the rolling plane. All developable rollers have ruled surfaces. Four families of developable rollers have been described to date: the prime polysphericons, the convex hulls of the two disc rollers, the polycons and the Platonicons.

In geometry, a polycon is a kind of a developable roller. It is made of identical pieces of a cone whose apex angle equals the angle of an even sided regular polygon. In principle, there are infinitely many polycons, as many as there are even sided regular polygons. Most members of the family have elongated spindle like shapes. The polycon family generalizes the sphericon. It was discovered by the Israeli inventor David Hirsch in 2017

References

  1. 1 2 3 4 Dirnböck, Hans; Stachel, Hellmuth (1997), "The development of the oloid" (PDF), Journal for Geometry and Graphics, 1 (2): 105–118, MR   1622664 .
  2. Sloane, N. J. A. (ed.). "SequenceA215447". The On-Line Encyclopedia of Integer Sequences . OEIS Foundation.
  3. Kuleshov, Alexander S.; Hubbard, Mont; Peterson, Dale L.; Gede, Gilbert (2011), "Motion of the Oloid-toy", Proc. 7th European Nonlinear Dynamics Conference, 24–29 July 2011, Rome, Italy (PDF), archived from the original (PDF) on 28 December 2013, retrieved 6 November 2013.
  4. Green, Judith (May 2, 1991), "hits and misses at Momix: it's not quite dance, but it's sometimes art", Dance review, San Jose Mercury News
  5. Boeding, Alan (April 27, 1988), "Circle dancing", The Christian Science Monitor
  6. Anderson, Jack (February 8, 2001), "Leaping Lizards and Odd Denizens of the Desert", Dance Review, The New York Times

Literature

Tobias Langscheid, Tilo Richter (Ed.): Oloid – Form of the Future. With contributions by Dirk Böttcher, Andreas Chiquet, Heinrich Frontzek a.o., niggli Verlag 2023, ISBN 978-3-7212-1025-5