The orbital angular momentum of light (OAM) is the component of angular momentum of a light beam that is dependent on the field spatial distribution, and not on the polarization. OAM can be split into two types. The internal OAM is an origin-independent angular momentum of a light beam that can be associated with a helical or twisted wavefront. The external OAM is the origin-dependent angular momentum that can be obtained as cross product of the light beam position (center of the beam) and its total linear momentum.
A beam of light carries a linear momentum , and hence it can be also attributed an external angular momentum . This external angular momentum depends on the choice of the origin of the coordinate system. If one chooses the origin at the beam axis and the beam is cylindrically symmetric (at least in its momentum distribution), the external angular momentum will vanish. The external angular momentum is a form of OAM, because it is unrelated to polarization and depends on the spatial distribution of the optical field (E).
A more interesting example of OAM is the internal OAM appearing when a paraxial light beam is in a so-called "helical mode". Helical modes of the electromagnetic field are characterized by a wavefront that is shaped as a helix, with an optical vortex in the center, at the beam axis (see figure). If the phase varies around the axis of such a wave, it carries orbital angular momentum. [1]
In the figure to the right, the first column shows the beam wavefront shape. The second column is the optical phase distribution in a beam cross-section, shown in false colors. The third column is the light intensity distribution in a beam cross-section (with a dark vortex core at the center).
The helical modes are characterized by an integer number , positive or negative. If , the mode is not helical and the wavefronts are multiple disconnected surfaces, for example, a sequence of parallel planes (from which the name "plane wave"). If , the handedness determined by the sign of , the wavefront is shaped as a single helical surface, with a step length equal to the wavelength . If , the wavefront is composed of distinct but intertwined helices, with the step length of each helix surface equal to , and a handedness given by the sign of . The integer is also the so-called "topological charge" of the optical vortex. Light beams that are in a helical mode carry nonzero OAM. As an example, any Laguerre-Gaussian mode with rotational mode number has such a helical wavefront. [2]
The classical expression of the orbital angular momentum is the following: [3] where and are the electric field and the vector potential, respectively, is the vacuum permittivity and we are using SI units. The -superscripted symbols denote the cartesian components of the corresponding vectors.
For a monochromatic wave this expression can be transformed into the following one: [4] [5]
This expression is generally nonvanishing when the wave is not cylindrically symmetric. In particular, in a quantum theory, individual photons may have the following values of the OAM: [5] where the topological charge m can be extracted numerically from electric field profile of vortex beams. [6]
The corresponding wave functions (eigenfunctions of OAM operator) have the following general expression: where is the cylindrical coordinate. As mentioned in the Introduction, this expression corresponds to waves having a helical wavefront (see figure above), with an optical vortex in the center, at the beam axis.
Orbital angular momentum states with occur naturally.[ citation needed ] OAM states of arbitrary can be created artificially using a variety of tools, such as using spiral phase plates, spatial light modulators and q-plates.
Spiral wave plates, made of plastic or glass, are plates where the thickness of the material increases in a spiral pattern in order to imprint a phase gradient on light passing through it. For a given wavelength, an OAM state of a given requires that the step height —the height between the thinnest and thickest parts of the plate— be given by where is the refractive index of the plate. Although the wave plates themselves are efficient, they are relatively expensive to produce, and are, in general, not adjustable to different wavelengths of light. [7]
Another way to modify the phase of the light is with a diffraction grating. For an state, the diffraction grating would consist of parallel lines. However, for an state, there will be a "fork" dislocation, and the number of lines above the dislocation will be one larger than below. An OAM state with can be created by increasing the difference in the number of lines above and below the dislocation. [8] As with the spiral wave plates, these diffraction gratings are fixed for , but are not restricted to a particular wavelength.
A spatial light modulator operates in a similar way to diffraction gratings, but can be controlled by computer to dynamically generate a wide range of OAM states.
This section may be too technical for most readers to understand.(July 2017) |
Theoretical work suggests that a series of optically distinct chromophores are capable of supporting an excitonic state whose symmetry is such that in the course of the exciton relaxing, a radiation mode of non-zero topological charge is created directly. [9]
Most recently,[ when? ] the geometric phase concept has been adopted for OAM generation. The geometric phase is modulated to coincide with the spatial phase dependence factor, i.e., of an OAM carrying wave. In this way, geometric phase is introduced by using anisotropic scatterers. For example, a metamaterial composed of distributed linear polarizers in a rotational symmetric manner generates an OAM of order 1. [10] To generate higher-order OAM wave, nano-antennas which can produce the spin-orbit coupling effect are designed and then arranged to form a metasurface with different topological charges. [11] Consequently, the transmitted wave carries an OAM, and its order is twice the value of the topological charge. Usually, the conversion efficiency is not high for the transmission-type metasurface. Alternative solution to achieve high transmittance is to use complementary (Babinet-inverted) metasurface. [12] On the other hand, it is much easier to achieve high conversion efficiency, even 100% efficiency in the reflection-type metasurface such as the composite PEC-PMC metasurface. [13]
Beside OAM generation in free space, integrated photonic approaches can also realize on-chip optical vortices carrying OAM. Representative approaches include patterned ring resonators, [14] subwavelength holographic gratings, [15] Non-Hermitian vortex lasers, [16] [17] and meta-waveguide OAM emitters. [18] [19]
Determining the spin angular momentum (SAM) of light is simple – SAM is related to the polarization state of the light: the AM is, per photon, in a left and right circularly polarized beam respectively. Thus the SAM can be measured by transforming the circular polarization of light into a p- or s-polarized state by means of a wave plate and then using a polarizing beam splitter that will transmit or reflect the state of light. [7]
The development of a simple and reliable method for the measurement of orbital angular momentum (OAM) of light, however, remains an important problem in the field of light manipulation. OAM (per photon) arises from the amplitude cross-section of the beam and is therefore independent of the spin angular momentum: whereas SAM has only two orthogonal states, the OAM is described by a state that can take any integer value N. [20] As the state of OAM of light is unbounded, any integer value of l is orthogonal to (independent from) all the others. Where a beam splitter could separate the two states of SAM, no device can separate the N (if greater than 2) modes of OAM, and, clearly, the perfect detection of all N potential states is required to finally resolve the issue of measuring OAM. Nevertheless, some methods have been investigated for the measurement of OAM.
Beams carrying OAM have a helical phase structure. Interfering such a beam with a uniform plane wave reveals phase information about the input beam through analysis of the observed spiral fringes. In a Mach–Zender interferometer, a helically phased source beam is made to interfere with a plane-wave reference beam along a collinear path. Interference fringes will be observed in the plane of the beam waist and/or at the Rayleigh range. The path being collinear, these fringes are pure consequence of the relative phase structure of the source beam. Each fringe in the pattern corresponds to one step through: counting the fringes suffices to determine the value of l.
Computer-generated holograms can be used to generate beams containing phase singularities, and these have now become a standard tool for the generation of beams carrying OAM. This generating method can be reversed: the hologram, coupled to a single-mode fiber of set entrance aperture, becomes a filter for OAM. This approach is widely used for the detection of OAM at the single-photon level.
The phase of these optical elements results to be the superposition of several fork-holograms carrying topological charges selected in the set of values to be demultiplexed. The position of the channels in far-field can be controlled by multiplying each fork-hologram contribution to the corresponding spatial frequency carrier. [21]
Other methods to measure the OAM of light include the rotational Doppler effect, systems based on a Dove prism interferometer, [22] the measure of the spin of trapped particles, the study of diffraction effects from apertures, and optical transformations. [23] [24] The latter use diffractive optical elements in order to unwrap the angular phase patterns of OAM modes into plane-wave phase patterns which can subsequently be resolved in the Fourier space. The resolution of such schemes can be improved by spiral transformations that extend the phase range of the output strip-shaped modes by the number of spirals in the input beamwidth. [25]
Research into OAM has suggested that light waves could carry hitherto unprecedented quantities of data through optical fibres. According to preliminary tests, data streams travelling along a beam of light split into 8 different circular polarities have demonstrated the capacity to transfer up to 2.5 terabits of data (equivalent to 66 DVDs or 320 gigabytes) per second. [26] Further research into OAM multiplexing in the radio and mm wavelength frequencies has been shown in preliminary tests to be able to transmit 32 gigabits of data per second over the air. The fundamental communication limit of orbital-angular-momentum multiplexing is increasingly urgent for current multiple-input multiple-output (MIMO) research. The limit has been clarified in terms of independent scattering channels or the degrees of freedom (DoF) of scattered fields through angular-spectral analysis, in conjunction with a rigorous Green function method. [27] The DoF limit is universal for arbitrary spatial-mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc., with a predefined physical aperture.
OAM states can be generated in coherent superpositions and they can be entangled, [28] [29] which is an integral element of schemes for quantum information protocols. Photon pairs generated by the process of parametric down-conversion are naturally entangled in OAM, [30] [31] and correlations measured using spatial light modulators (SLM). [32]
Using qudits (with d levels, as opposed to a qubit's 2 levels) has been shown to improve the robustness of quantum key distribution schemes. OAM states provide a suitable physical realisation of such a system, and a proof-of-principle experiment (with 7 OAM modes from to ) has been demonstrated. [33]
In 2019, a letter published in the Monthly Notices of the Royal Astronomical Society presented evidence that OAM radio signals had been received from the vicinity of the M87* black hole, over 50 million light years distant, suggesting that optical angular momentum information can propagate over astronomical distances. [34]
Diffraction is the interference or bending of waves around the corners of an obstacle or through an aperture into the region of geometrical shadow of the obstacle/aperture. The diffracting object or aperture effectively becomes a secondary source of the propagating wave. Italian scientist Francesco Maria Grimaldi coined the word diffraction and was the first to record accurate observations of the phenomenon in 1660.
Nonlinear optics (NLO) is the branch of optics that describes the behaviour of light in nonlinear media, that is, media in which the polarization density P responds non-linearly to the electric field E of the light. The non-linearity is typically observed only at very high light intensities (when the electric field of the light is >108 V/m and thus comparable to the atomic electric field of ~1011 V/m) such as those provided by lasers. Above the Schwinger limit, the vacuum itself is expected to become nonlinear. In nonlinear optics, the superposition principle no longer holds.
In optics, a Gaussian beam is an idealized beam of electromagnetic radiation whose amplitude envelope in the transverse plane is given by a Gaussian function; this also implies a Gaussian intensity (irradiance) profile. This fundamental (or TEM00) transverse Gaussian mode describes the intended output of many lasers, as such a beam diverges less and can be focused better than any other. When a Gaussian beam is refocused by an ideal lens, a new Gaussian beam is produced. The electric and magnetic field amplitude profiles along a circular Gaussian beam of a given wavelength and polarization are determined by two parameters: the waistw0, which is a measure of the width of the beam at its narrowest point, and the position z relative to the waist.
Matter waves are a central part of the theory of quantum mechanics, being half of wave–particle duality. At all scales where measurements have been practical, matter exhibits wave-like behavior. For example, a beam of electrons can be diffracted just like a beam of light or a water wave.
Coherence expresses the potential for two waves to interfere. Two monochromatic beams from a single source always interfere. Wave sources are not strictly monochromatic: they may be partly coherent. Beams from different sources are mutually incoherent.
In astronomy, seeing is the degradation of the image of an astronomical object due to turbulence in the atmosphere of Earth that may become visible as blurring, twinkling or variable distortion. The origin of this effect is rapidly changing variations of the optical refractive index along the light path from the object to the detector. Seeing is a major limitation to the angular resolution in astronomical observations with telescopes that would otherwise be limited through diffraction by the size of the telescope aperture. Today, many large scientific ground-based optical telescopes include adaptive optics to overcome seeing.
Optical tweezers are scientific instruments that use a highly focused laser beam to hold and move microscopic and sub-microscopic objects like atoms, nanoparticles and droplets, in a manner similar to tweezers. If the object is held in air or vacuum without additional support, it can be called optical levitation.
A metamaterial is a type of material engineered to have a property that is rarely observed in naturally occurring materials. They are made from assemblies of multiple elements fashioned from composite materials such as metals and plastics. These materials are usually arranged in repeating patterns, at scales that are smaller than the wavelengths of the phenomena they influence. Metamaterials derive their properties not from the properties of the base materials, but from their newly designed structures. Their precise shape, geometry, size, orientation and arrangement gives them their smart properties capable of manipulating electromagnetic waves: by blocking, absorbing, enhancing, or bending waves, to achieve benefits that go beyond what is possible with conventional materials.
Electron optics is a mathematical framework for the calculation of electron trajectories in the presence of electromagnetic fields. The term optics is used because magnetic and electrostatic lenses act upon a charged particle beam similarly to optical lenses upon a light beam.
Phase-contrast imaging is a method of imaging that has a range of different applications. It measures differences in the refractive index of different materials to differentiate between structures under analysis. In conventional light microscopy, phase contrast can be employed to distinguish between structures of similar transparency, and to examine crystals on the basis of their double refraction. This has uses in biological, medical and geological science. In X-ray tomography, the same physical principles can be used to increase image contrast by highlighting small details of differing refractive index within structures that are otherwise uniform. In transmission electron microscopy (TEM), phase contrast enables very high resolution (HR) imaging, making it possible to distinguish features a few Angstrom apart.
In optics, in particular scalar diffraction theory, the Fresnel number, named after the physicist Augustin-Jean Fresnel, is a dimensionless number relating to the pattern a beam of light forms on a surface when projected through an aperture.
An optical vortex is a zero of an optical field; a point of zero intensity. The term is also used to describe a beam of light that has such a zero in it. The study of these phenomena is known as singular optics.
The Goos–Hänchen effect (named after Hermann Fritz Gustav Goos and Hilda Hänchen is an optical phenomenon in which linearly polarized light undergoes a small lateral shift when totally internally reflected. The shift is perpendicular to the direction of propagation in the plane containing the incident and reflected beams. This effect is the linear polarization analog of the Imbert–Fedorov effect.
The angular momentum of light is a vector quantity that expresses the amount of dynamical rotation present in the electromagnetic field of the light. While traveling approximately in a straight line, a beam of light can also be rotating around its own axis. This rotation, while not visible to the naked eye, can be revealed by the interaction of the light beam with matter.
Orbital angular momentum multiplexing is a physical layer method for multiplexing signals carried on electromagnetic waves using the orbital angular momentum (OAM) of the electromagnetic waves to distinguish between the different orthogonal signals.
An electromagnetic metasurface refers to a kind of artificial sheet material with sub-wavelength thickness. Metasurfaces can be either structured or unstructured with subwavelength-scaled patterns in the horizontal dimensions.
A q-plate is an optical device that can form a light beam with orbital angular momentum (OAM) from a beam with well-defined spin angular momentum (SAM). Q-plates are based on the SAM-OAM coupling that may occur in media that are both anisotropic and inhomogeneous, such as an inhomogeneous anisotropic birefringent waveplate. Q-plates are also currently realized using total internal reflection devices, liquid crystals, metasurfaces based on polymers, and sub-wavelength gratings.
JCMsuite is a finite element analysis software package for the simulation and analysis of electromagnetic waves, elasticity and heat conduction. It also allows a mutual coupling between its optical, heat conduction and continuum mechanics solvers. The software is mainly applied for the analysis and optimization of nanooptical and microoptical systems. Its applications in research and development projects include dimensional metrology systems, photolithographic systems, photonic crystal fibers, VCSELs, Quantum-Dot emitters, light trapping in solar cells, and plasmonic systems. The design tasks can be embedded into the high-level scripting languages MATLAB and Python, enabling a scripting of design setups in order to define parameter dependent problems or to run parameter scans.
Electrons in free space can carry quantized orbital angular momentum (OAM) projected along the direction of propagation. This orbital angular momentum corresponds to helical wavefronts, or, equivalently, a phase proportional to the azimuthal angle. Electron beams with quantized orbital angular momentum are also called electron vortex beams.
Natalia M. Litchinitser is an Electrical Engineer and Professor at Duke University. She works on optical metamaterials and their application in photonic devices. Litchinitser is a Fellow of the American Physical Society, The Optical Society and the Institute of Electrical and Electronics Engineers.
{{cite book}}
: CS1 maint: multiple names: authors list (link)