| Palestine Railways H class | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 H class 4-6-0 at Haifa East station in 1931 | |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
The Palestine Railways H class was a type of standard gauge mixed traffic steam locomotive on the Palestine Military Railway and its civilian successors Palestine Railways and Israel Railways. The PMR introduced the class in 1919 and Israel Railways withdrew the last ones in 1960.
The PMR, part of the British Army, was created during World War I to operate all railways in the British and Allied Sinai and Palestine Campaign. It inherited a standard gauge locomotive fleet from the Egyptian Expeditionary Force's Sinai Railway dominated by two classes of 19th-century 0-6-0 requisitioned from railways in Britain: the LNWR 17in Coal Engines and LSWR 395 class. [3] In Palestine the Coal Engines proved unreliable and neither class was powerful enough for PMR traffic. [3]
In 1918 the PMR sought a class of 50 more powerful mixed traffic locomotives to replace the Coal Engines and relegate the 395 class to lighter duties. However, British locomotive builders were so busy with War orders that none could supply a class of 50 locomotives quickly enough. [3]
The UK War Department (WD) had already bought at least 70 4-6-0 locomotives from Baldwin Locomotive Works (BLW) in Eddystone, Pennsylvania in 1917. They carried the WD numbers 801 – 870 of the same class, some of them were fitted with rounded cabs to better fit in the European gauge. All of them were transferred to Belgium at the end of the World War One, [3] and became SNCB/NMBS type 40 in 1926. [7] They hauled passenger trains until 1962. Therefore, in 1918 the PMR ordered a batch of 50 of the same class of 4-6-0 from BLW. [3] The first 10 reached Palestine in 1919 and the remaining 40 followed in 1920. [8] Following on from the batch sent to Europe, this batch received the WD numbers 871 – 920. [3]
In 1920 the San Remo Conference mandated the United Kingdom to administer Palestine. The PMR was duly replaced by a civilian organisation, Palestine Railways, which designated the Baldwins class H. In the 1920s it found the class suitable for most work except shunting and powerful enough for most normal PR traffic.
In service all members of the class were painted black. [2] From 1944 each had its number painted in very large numerals on the side of the tender or tank. [2]
The Jerusalem terminus of the Jaffa and Jerusalem line suffered from restricted space, and after conversion to standard gauge never had a facility to turn 4-6-0 tender locomotives. Running tender first was unpopular in any location, but especially on this route which had tight curves and steep gradients through the Judean hills, so PR sought a tank locomotive powerful enough for the job. In 1922 PR introduced the 2-8-4T K class tanks from Kitson & Company in England, which were powerful enough to haul 250 ton trains up the 2% (1 in 50) ruling gradient to Jerusalem but suffered derailments caused by their eight-coupled wheel arrangement. [9]
Therefore, in 1926 PR sent H class locomotives 895, 904, 905, 909, 915 and 918 [1] to Armstrong Whitworth in England whose works at Scotswood in Newcastle-upon-Tyne converted them into 4-6-2T tank locomotives. [10] PR renumbered them consecutively 7 – 12 and designated them class H2. [1] On the steep climb up to Jerusalem these could haul only trains of 200 tons compared with the K class's 250, but this was the best PR could achieve with its limited resources. [10]
Baldwin had built the class with round-topped steel fireboxes [11] but the PR found these unsatisfactory. It therefore sent six more H class to Armstrong Whitworth who fitted copper fireboxes instead. [10] On other H class locomotives PR made modifications themselves, fitting Belpaire fireboxes and reducing the number of domes from three to two. [10]
In 1933 PR opened its own railway workshops in Haifa. [12] In 1937–38, with the help of some parts supplied by Nasmyth, Wilson & Company of Salford, England, [12] the Qishon works converted numbers 881, 896, 897, 910 and 912 to tank locomotives. [1] PR gave this batch a 4-6-4T wheel arrangement, numbered them consecutively 13–17 and designated them class H3. [1]
In 1935 the Baldwins were relegated from the heaviest traffic by the arrival of six more powerful P class 4-6-0 locomotives from the North British Locomotive Company in Glasgow, Scotland. [13] During World War II PR carried increasing amounts of British and Allied military traffic. War Department ROD 2-8-0 and LMS Stanier Class 8F 2-8-0 locomotives hauled the heaviest trains but the Baldwins were also worked very hard and in 1942 six were lost to accidents. For example, 888 (works no. 50354) was wrecked by a head-on collision in Gaza and its remains were scrapped two years later. [14]
PR had fuelled its locomotives with Welsh coal [6] but in June 1940 Italy declared war on the Allies, making the Mediterranean extremely dangerous for British merchant shipping. PR therefore began converting its locomotives to burn oil, but it did not complete the conversion programme until 1943. [6]
Despite the more powerful NBL 4-6-0 and 8F 2-8-0 locomotives, after World War II the Baldwins remained PR's most numerous locomotives and its maids of all work. In the 1947–1949 Palestine war PR was a particular target of sabotage and terrorism. When in February 1948 PR's General Manager, Arthur Kirby, recorded that ...locomotives wrecked by mines have been repaired time and time again so that most of them, though blown up several times, are still working after 28 years of service – and working efficiently..., [15] his reference to "28 years" clearly referred to Palestine's surviving Baldwins.[ citation needed ]
After the UK withdrew from Mandate Palestine in May 1948 all six H2, all five H3 and the 33 surviving H class passed into Israel Railways stock. Baldwin had designed the 4-6-0s to be simple and rugged but not to last particularly long, but the British and Israelis got good service from them for 40 years. [11] By 1956 diesels had taken over the main line services and steam workings were largely confined to the central part of the country around Lod (formerly Lydda). [16] A number of Baldwins remained in service until 1959 and one, H class no. 901 (BLW works no. 50454) was still in traffic six months after steam on Israel Railways had officially ended that year. [11] All 44 of Israel Railways' Baldwins were scrapped by about 1960.[ citation needed ]
The Baldwin Locomotive Works (BLW) was an American manufacturer of railroad locomotives from 1825 to 1951. Originally located in Philadelphia, it moved to nearby Eddystone, Pennsylvania, in the early 20th century. The company was for decades the world's largest producer of steam locomotives, but struggled to compete as demand switched to diesel locomotives. Baldwin produced the last of its 70,000-plus locomotives in 1951, before merging with the Lima-Hamilton Corporation on September 11, 1951, to form the Baldwin-Lima-Hamilton Corporation.
Under the Whyte notation for the classification of steam locomotives, 4-6-2 represents the wheel arrangement of four leading wheels on two axles, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The 4-6-2 locomotive became almost globally known as a Pacific type.
Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type.
Under the Whyte notation for the classification of steam locomotives, 2-10-2 represents the wheel arrangement of two leading wheels, ten powered and coupled driving wheels, and two trailing wheels. In the United States of America and elsewhere the 2-10-2 is known as the Santa Fe type, after the Atchison, Topeka and Santa Fe Railway that first used the type in 1903.
Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-6-0 represents the configuration of four leading wheels on two axles in a leading bogie and six powered and coupled driving wheels on three axles with the absence of trailing wheels. In the mid 19th century, this wheel arrangement became the second most popular configuration for new steam locomotives in the United States, where this type is commonly referred to as a ten-wheeler. As a locomotive pulling trains of lightweight all-wood passenger cars in the 1890–1920s, it was exceptionally stable at near 100 mph (160 km/h) speeds on the New York Central's New York to Chicago Water Level Route and on the Reading Railroad's Camden to Atlantic City, NJ, line. As passenger equipment grew heavier with all steel construction, heavier locomotives replaced the ten-wheeler.
Under the Whyte notation for the classification of steam locomotives, 2-8-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. In the United States and elsewhere, this wheel arrangement is commonly known as a Consolidation, after the Lehigh and Mahanoy Railroad’s Consolidation, the name of the first 2-8-0.
Under the Whyte notation for the classification of steam locomotives, 2-8-2 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. This configuration of steam locomotive is most often referred to as a Mikado, frequently shortened to Mike.
Under the Whyte notation for the classification of steam locomotives, 4-8-0 represents the wheel arrangement of four leading wheels on two axles, usually in a leading truck or bogie, eight powered and coupled driving wheels on four axles and no trailing wheels. In North America and in some other countries the type was usually known as the Twelve-wheeler.
Under the Whyte notation for the classification of steam locomotives, 2-6-2 represents the wheel arrangement of two leading wheels, six coupled driving wheels and two trailing wheels. This arrangement is commonly called a Prairie.
The London and North Eastern Railway (LNER) Class V2 2-6-2 steam locomotives were designed by Sir Nigel Gresley for express mixed traffic work, and built at the LNER shops at Doncaster and Darlington between 1936 and 1944. The best known is the first of the class, 4771 Green Arrow, which is the sole survivor of the class.
The United States Army Transportation Corps (USATC) S100 Class is a 0-6-0 steam locomotive that was designed for switching (shunting) duties in Europe and North Africa during World War II. Several were later used on railways in Austria, Great Britain, France, Greece, Italy, Yugoslavia, Palestine, Iraq, Iran, the Netherlands, Israel and China.
Israel Railway Museum is the national railway museum of Israel, located in Haifa. The railway museum is owned by Israel Railways and is located at the Haifa East Railway Station which nowadays no longer serves passengers.
The LNWR 17in Coal Engine was a class of 0-6-0 steam tender engines designed by Francis Webb for the London and North Western Railway. They were simple locomotives and in UK service they were very reliable. "17in" refers to their cylinder diameter in inches. They were called "Coal Engines" because they were used for hauling coal trains.
The LSWR 395 class was a class of goods 0-6-0 steam locomotives designed for the London and South Western Railway by William Adams as part of his modernisation programme. All 70 were constructed by Neilson and Company between 1881 and 1886. The last 34 locomotives differed in being slightly longer and heavier.
The WAGR P and Pr classes were two classes of 4-6-2 steam locomotives designed for express passenger service on the Western Australian Government Railways mainline network. The initial designs were prepared by E.S. Race and together the two classes had a total build number of thirty-five locomotives, the P and Pr classes entering service in 1924 and 1938 respectively. Both classes were used on express passenger services, greatly improving the economy and speed of long-distance passenger travel in Western Australia, the results of which were most visible on the West Australian stage of the Trans-Australian Railway and Westland Express.
Palestine Railways was a government-owned railway company that ran all public railways in the League of Nations mandate territory of Palestine from 1920 until 1948. Its main line linked El Kantara in Egypt with Haifa. Branches served Jaffa, Jerusalem, Acre and the Jezreel Valley.
The Palestine Railways P class was a type of standard gauge mixed traffic steam locomotive on Palestine Railways and its successor Israel Railways. The PMR introduced the class in 1935 and Israel Railways withdrew the last ones in 1960.
The Egyptian State Railways 545 class was a type of standard gauge mixed traffic steam locomotive on Egyptian State Railways.
The South African Railways Class GE 2-8-2+2-8-2 of 1925 was an articulated steam locomotive.
The Caledonian Railway 721 Class was a class of 4-4-0 steam locomotives designed by John F. McIntosh for the Caledonian Railway (CR) and introduced in 1896. All survived to be absorbed by the London, Midland and Scottish Railway (LMS) in 1923 and a few survived into British Railways (BR) ownership in 1948.