An aerospace manufacturer is a company or individual involved in the various aspects of designing, building, testing, selling, and maintaining aircraft, aircraft parts, missiles, rockets, or spacecraft. Aerospace is a high technology industry.
The Airbus A400M Atlas is a European four-engine turboprop military transport aircraft. It was designed by Airbus Military, now Airbus Defence and Space, as a tactical airlifter with strategic capabilities to replace older transport aircraft, such as the Transall C-160 and the Lockheed C-130 Hercules. The A400M is sized between the C-130 and the Boeing C-17 Globemaster III. It can carry heavier loads than the C-130 and can use rough landing strips. In addition to its transport capabilities, the A400M can perform aerial refueling and medical evacuation when fitted with appropriate equipment.
GKN Ltd is a British multinational automotive and aerospace components business headquartered in Redditch, England. It is a long-running business known for many decades as Guest, Keen and Nettlefolds. It can trace its origins back to 1759 and the birth of the Industrial Revolution.
The Rolls-Royce Trent is a family of high-bypass turbofans produced by Rolls-Royce. It continues the three spool architecture of the RB211 with a maximum thrust ranging from 61,900 to 97,000 lbf . Launched as the RB-211-524L in June 1988, the prototype first ran in August 1990. Its first variant is the Trent 700 introduced on the Airbus A330 in March 1995, then the Trent 800 for the Boeing 777 (1996), the Trent 500 for the A340 (2002), the Trent 900 for the A380 (2007), the Trent 1000 for the Boeing 787 (2011), the Trent XWB for the A350 (2015), and the Trent 7000 for the A330neo (2018). It has also marine and industrial variants like the RR MT30.
Glare is a fiber metal laminate (FML) composed of several very thin layers of metal interspersed with layers of S-2 glass-fiber pre-preg, bonded together with a matrix such as epoxy. The uni-directional pre-preg layers may be aligned in different directions to suit predicted stress conditions.
The Airbus A350 is a long-range, wide-body twin-engine jet airliner developed and produced by Airbus. The initial A350 design proposed by Airbus in 2004, in response to the Boeing 787 Dreamliner, would have been a development of the Airbus A330 with composite wings and new engines. Due to inadequate market support, Airbus switched in 2006 to a clean-sheet "XWB" design, powered by two Rolls-Royce Trent XWB high bypass turbofan engines. The prototype first flew on 14 June 2013 from Toulouse, France. Type certification from the European Aviation Safety Agency (EASA) was obtained in September 2014, followed by certification from the Federal Aviation Administration (FAA) two months later.
Safran Landing Systems, formerly Messier-Bugatti-Dowty, is a French company involved in the design, development, manufacture and customer support of all types of aircraft landing gear, wheels and brakes and a wholly owned subsidiary of Safran SA. It is the world's largest manufacturer of aircraft landing gear.
Spirit AeroSystems Holdings, Inc., is an American aerostructure manufacturer. The company, based in Wichita, Kansas, builds several important pieces of Boeing aircraft, including the fuselage of the 737, and 787, as well as the flight deck section of the fuselage of nearly all of Boeing airliners. Spirit also produces fuselage sections and front wing spars for the Airbus A350. Spirit's main competition comes from Collins Aerospace, Kawasaki Heavy Industries, Leonardo, and Triumph Group.
The Boeing Yellowstone Project was a Boeing Commercial Airplanes project to replace its entire civil aircraft portfolio with advanced technology aircraft. New technologies to be introduced include composite aerostructures, more electrical systems, and more fuel-efficient turbofan engines. The term "Yellowstone" refers to the technologies, while "Y1" through "Y3" refer to the actual aircraft.
The aft pressure bulkhead or rear pressure bulkhead is the rear component of the pressure seal in all aircraft that cruise in a tropopause zone in the Earth's atmosphere. It helps maintain pressure when stratocruising and protects the aircraft from bursting due to the higher internal pressure.
Aerosud is a group of companies with Aerosud Holdings as the parent company. The group is a South African aeronautical engineering and manufacturing company. Aerosud Aerospace was renamed Paramount Aerospace following its acquisition by Paramount Group and Aerosud Innovation and Training Centre (ITC) was incorporated in the AHRLAC Holdings Ahrlac of companies during a 2014 restructuring.
Diehl Aerospace GmbH is an interiors and avionics specialist. Headquartered in Überlingen, Germany, the company is organised as a joint venture between the German Diehl Group and the French Thales Group.
RUAG Holding is a Swiss company specialising in aerospace engineering and the defence industry. Its headquarters are located in Bern, while it also has numerous production sites in Switzerland, Germany, Sweden, Hungary, Austria and United States, and sales companies in Australia, UK, France, Belgium, Brazil and Malaysia.
The aerospace industry of the United Kingdom is the second-largest national aerospace industry in the world and the largest in Europe by turnover, with a global market share of 17% in 2019. In 2020, the industry employed 116,000 people.
Elbe Flugzeugwerke GmbH is an aerospace manufacturer based in Dresden, Germany.
Daher is a French industrial conglomerate. It is operational across the aerospace, defence, nuclear, and automotive industrial sectors in the fields of manufacturing, services, and transport.
Airbus SE is a European multinational aerospace corporation. The company consists of three core units. Its primary business is the design and manufacturing of commercial aircraft but it also has separate defence and space and helicopter divisions. Since 2019, Airbus is the world's largest manufacturer of airliners as well as the leading helicopter manufacturer.
Ingersoll Machine Tools is a manufacturer located in Rockford, Illinois that produces large scale machine tools for use in metal cutting, 3D Printing, and automated fiber placement.
Stelia Aerospace is an aerospace company headquartered in Toulouse, France. It specializes in designing and manufacture of aerostructures, pilot seats and premium class passenger seats, mainly for the commercial aviation sector.
Today's Airbus SE is the product of international consolidation in the European aerospace industry tracing way before the formation of the Airbus Industrie GIE consortium in 1970. In 2000, the European Aeronautic Defence and Space Company (EADS) NV was established through the merger of Aerospatiale-Matra of France and DASA from Germany, and that subsequently bought Construcciones Aeronauticas from Spain. In addition to other subsidiaries pertaining to security and space activities, EADS owned 100% of the pre-existing Eurocopter SA, established in 1992, as well as 80% of Airbus Industrie GIE. In 2001, Airbus Industrie GIE was reorganised as Airbus SAS, a simplified joint-stock company. In 2006, EADS acquired the remaining 20% shares of Airbus Industrie GIE from BAE Systems. EADS NV was renamed Airbus Group NV in 2014 and finally Airbus SE in 2015. Due to the commercial aircraft division's prominence within Airbus SE with it representing the largest part of the corporation's activities, Airbus S.A.S was published to be merged into the parent company in January 2017, but it was never done. Airbus SE remains therefore as the holding company for the commercial aircraft subsidiary Airbus SAS, while also being the parent company of the other two divisions Airbus Defence and Space and Airbus Helicopters.
