Banjo | |
---|---|
Role | Glider and motor glider |
National origin | Czech Republic |
Manufacturer | ProFe |
Status | In production |
Number built | 4 (Banjo model, 1998) |
The ProFe Banjo is a family of Czech high-wing, strut-braced, T-tailed gliders and motor gliders designed and produced by ProFe in kit form for amateur construction. [1] [2] [3] [4]
Named for the musical instrument of the same name, the Banjo series of gliders consists of three models, the basic glider model, a powered version and the two seat DuoBanjo. [1] [2]
The Banjo sailplane is of mixed construction. Its 13.3 m (43.6 ft) span wing is strut-braced with one lift strut per side and uses a plywood box spar and spruce wing ribs, with the leading edge of the wing covered in plywood and the rear portion covered in aircraft fabric covering. The nose ribs are expanded polystyrene while the ailerons are made of wood and covered in fabric. The wing airfoil is an SM701 at the wing root transitioning to a Wortmann FX-60-126 at the wing tip, while the tailplane uses a Wortmann FX-71-L-150/30 airfoil. The fuselage is of fibreglass monocoque construction, while its one-piece bubble canopy is made from polycarbonate. The aircraft has fixed monowheel landing gear with a wheel brake and upper wing surface air brakes. [1] [3] [5] [6]
Data from Purdy and company website [1] [5] [6]
General characteristics
Performance
Related lists
The Schleicher ASW 15 is a single-seat sailplane designed in 1968 by Gerhard Waibel and manufactured by Alexander Schleicher GmbH & Co. The ASW 15 has shoulder-mounted wings and an all-flying tailplane, with its single tow-release placement a compromise between winching and aerotowing. The later ASW 15B had several improvements, including a tow-release placed on the plane of symmetry, an 11 cm taller rudder, a slightly larger main wheel, and the provision of a 90-litre water ballast system.
The Schleicher ASW 17 is a single-seat Open Class sailplane that was built by the German manufacturer Alexander Schleicher GmbH & Co and first flew in 1971. It replaced the ASW 12, and was replaced in 1981 by the ASW 22.
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The Let L-33 Solo is a Czech shoulder-wing, single-seat, glider, designed by Marian Meciar and Vaclav Zajic, and produced by Let Kunovice. The L-33 first flew in 1992 and remained in production through 2012, supplied as a ready-to-fly aircraft.
The Hall Vector 1 is an American high-wing, ultralight glider that was designed by Stan Hall for serious cross-country flights.
The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.
The Gehrlein GP-1 is an American mid-wing, single seat FAI Standard Class glider that was designed by Jay and Rod Gehrlein and first flown in July 1968.
The Parker RP9 T-Bird is an American, high-wing, T-tailed, single-seat, FAI Open Class glider that was designed and constructed by Ray Parker between 1956 and 1962.
The Whigham GW-2 is an American high-wing, single-seat, V-tailed, FAI Open Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Whigham GW-5 is an American mid-wing, single seat, FAI Standard Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Vogt Lo-170 is a West German high-wing, FAI Open Class single seat glider that was designed by Alfred Vogt.
The Aviastroitel AC-4 Russia is a Russian mid-wing, single-seat glider designed by Vladimir Egorovich Fedorov and produced by Aircraft Cooperative Mechta, which became Aviastroitel, now Glider Air Craft.
The Farrar LSG-1 Bird Flight Machine is an American, high-wing, V-tailed, single-seat, experimental research glider that was designed and built by Demetrius F. Farrar Jr. in 1969 for exploring aspects of bird flight.
The Masak Scimitar was an American mid-wing, single-seat glider that was designed and constructed by Peter Masak. It first flew in 1995.
The PZL Krosno KR-03 Puchatek is a Polish mid-wing, T-tailed, two-seats-in-tandem, glider that was designed by Jerzy Krawczyk and Eugeniusz Pelczar and produced by PZL Krosno, first flying in 1985.
The Rensselaer RP-1 is an American low-wing, single-seat, foot-launchable prototype glider that was designed and built by the Rensselaer Polytechnic Institute of Troy, New York. It first flew in 1980.
The Rensselaer RP-3 is an American mid-wing, T-tailed single-seat, glider that was designed by Brian E. Thompson and produced by the Rensselaer Polytechnic Institute of Troy, New York. It first flew in 1998.
The ProFe D-10 Tukan is a Czech high-wing, strut-braced, T-tailed, two-seat motor glider that was designed and produced by ProFe and made available in kit form for amateur construction.
The TeST TST-3 Alpin T is a Czech shoulder-wing, T-tailed, single-seat glider and motor glider that was designed and produced by TeST of Brno.