Pultec EQP-1

Last updated

The Pultec EQP-1 Program Equalizer is an audio equalizer produced by Pulse Techniques (Pultec) beginning in 1956 with variants produced until 1981, and put back into production in 2000.

Contents

The EQP-1 and its variants were widely used in professional recording studios and established as a studio standard. It was inducted into the TECnology Hall of Fame in 2005. [1]

History

Electronic engineers and former RCA Institute classmates Eugene Shenk and Ollie Summerlin founded Pulse Techniques, Incorporated (Pultec) on February 1, 1953. The company, based in Teaneck, New Jersey, initially manufactured specialized equipment for professional audio engineers, such as adjustable power supplies for tube equipment and audio oscillators used for testing. [2] [3] [4]

Clair D. Krepps, who had previously worked with Summerlin, both in the Navy, and at Capitol Records, building the labels' first New York mastering studio, had since become the chief engineer at MGM Studios in New York and was renting bench space in Pultec's shop. Krepps told Summerlin and Shenk that an equalizer designed for recording studio applications, unlike the lossy, noisy equalizers designed for the film industry available at the time, was needed. Krepps provided $250 seed money and an MGM purchase order to Pultec to design and build such an EQ. [5] The resulting product, the Pultec EQP-1 Program Equalizer, was introduced in 1956.

Pulse Techniques produced the EQP-1 and numerous variants for over 20 years. In 1981 Shenk wanted to retire but was unsuccessful in finding a buyer for the company, so he shut down the factory. [4] After closing, he was contacted by the Power Station recording studio owner Tony Bongiovi, who wanted 24 EQP-1A3, which were produced in a final production run by Gene Shenk. [3]

In 2000, Dr. Steve Jackson sought to build a completely accurate recreation of the original EQP-1, and contacted Shenk for guidance. [3] [4] After 10 years of painstaking development, Jackson established Pulse Techniques, LLC and resumed the manufacturing of the EQP-1A3 and other classic Pultec models. [6] [2]

Design

The EQP-1 is a passive equalizer with a tube amplifier stage that restores the gain lost from the passive EQ, making it practical for use in broadcast and recording. [5]

Its low frequency section is a shelving EQ with three selectable frequency bands at 30, 60, and 100 Hz which can be simultaneously boosted or attennuated. Its high frequency section offers boosting at 3, 5, 8, 10, and 12 kHz, with a separate bandwidth control for altering the Q of the EQ curve from sharp to broad. In addition, it has a separate variable-attenuation 10 kHz low-pass filter. [7]

The amplifier stage is fully-balanced and operates in a classic push‑pull arrangement. Its input section is built around a 12AX7/ECC83, while the output transformer is driven by a 12AU7/ECC82. Transformer distortion and some output loading effects are automatically compensated via negative feedback achieved by an extra secondary winding on the output transformer. [7]

Models

EQP-1 (1956) - Pultec's original program equalizer, housed in a 3U rackmount chassis.

EQH-2 (1956) - Compact (2U) two-band (low shelf and high peak) version with different tube amp design and different EQ curves, which were later incorporated into the EQP-1A. [4]

EQP-1A (1961) - The EQP-1 was replaced by the updated EQP-1A, which had added frequency selections. The new 1A model had added a 20 Hz boost and attenuation, a 16 kHz boost, and a 5, 10, and 20 kHz attenuation. [3]

EQP-1S - like EQP-1, but with modified low-frequency boost/attenuation response curves, two additional peak boost frequencies, and two additional high-frequency shelf boost curves.

EQP-1A3 (1971) - Smaller (2U) version of EQP-1A with identical features and circuitry. [4]

EQP-1A3SS - Solid-state version with discrete transistor-based electronics instead of vacuum tubes. [4]

In use

The design of the EQP-1 makes it possible for a user to simultaneously boost and attenuate low end frequencies. While the owner's manual advises against doing this, in practice doing so has been discovered to be quite effective for tightening and defining the low end to sit nicely within a mix. This practice is often referred to as the "Pultec trick." [8]

The EQP-1 and its variants were widely adopted by professional recording studios, including Universal Recording Corporation, Capitol, RCA Victor, [9] Abbey Road, [10] Decca, Olympic, [11] and others.

Legacy

Once out of production, original Pultecs became harder to find, with mint examples selling for $6,000 or more. [7] Recognizing the market's need for an EQ with the Pultec's features, manufacturers introduced recreations and new versions. In 1985, Danish company Lydkraft launched the Tube-Tech brand with the PE 1A, a near-direct copy of the EQP-1A. In 1990, Manley Laboratories contacted Shenk to ask his permission to produce its own version of Pultec's classic EQ, resulting in the Manley Enhanced 'Pultec' Equalizer, whose compact 1U design features additional frequency bands, an upgraded Manley-designed power supply, and Manley line amps, and other enhancements. [12] [13] In 2010, Cartec introduced the EQP1A, its own recreation of the Pultec classic with modern components and utilizing transformers and inductors of the company's own design. [14] Pultec-inspired EQs have been released by Warm Audio, Klark Teknik, WesAudio, Retro Instruments, and others. [15] [16] [17]

Pultec's EQ has also been emulated by various software plug-ins, including the Apogee FX Rack, Avid's Pultec Bundle, iZotope's Ozone 8 Vintage EQ, Universal Audio's Pultec Passive EQ Collection, and Waves PuigTec EQs, named after engineer/producer Jack Joseph Puig's own original Pultec units. [15] [18] [19]

Related Research Articles

<span class="mw-page-title-main">Analog television</span> Television that uses analog signals

Analog television is the original television technology that uses analog signals to transmit video and audio. In an analog television broadcast, the brightness, colors and sound are represented by amplitude, phase and frequency of an analog signal.

<span class="mw-page-title-main">Emphasis (telecommunications)</span> Process for reducing noise

In signal processing, pre-emphasis is a technique to protect against anticipated noise and loss. The idea is to boost the frequency range that is most susceptible to noise and loss beforehand, so that after a noisy and lossy process more information can be recovered from that frequency range. Removal of the distortion caused by pre-emphasis is called de-emphasis, making the output accurately reproduce the original input.

<span class="mw-page-title-main">Microphone</span> Device that converts sound into an electrical signal

A microphone, colloquially called a mic, or mike, is a transducer that converts sound into an electrical signal. Microphones are used in many applications such as telephones, hearing aids, public address systems for concert halls and public events, motion picture production, live and recorded audio engineering, sound recording, two-way radios, megaphones, and radio and television broadcasting. They are also used in computers and other electronic devices, such as mobile phones, for recording sounds, speech recognition, VoIP, and other purposes, such as ultrasonic sensors or knock sensors.

<span class="mw-page-title-main">Audiophile</span> High-fidelity sound reproduction enthusiast

An audiophile is a person who is enthusiastic about high-fidelity sound reproduction. The audiophile seeks to achieve high sound quality in the audio reproduction of recorded music, typically in a quiet listening space in a room with good acoustics.

<span class="mw-page-title-main">DI unit</span> Audio signal conversion device

A DI unit is an electronic device typically used in recording studios and in sound reinforcement systems to connect a high output impedance unbalanced output signal to a low-impedance, microphone level, balanced input, usually via an XLR connector and XLR cable. DIs are frequently used to connect an electric guitar or electric bass to a mixing console's microphone input jack. The DI performs level matching, balancing, and either active buffering or passive impedance matching/impedance bridging. DI units are typically metal boxes with input and output jacks and, for more expensive units, “ground lift” and attenuator switches.

<span class="mw-page-title-main">Audio filter</span> Frequency dependent circuit

An audio filter is a frequency-dependent circuit, working in the audio frequency range, 0 Hz to 20 kHz. Audio filters can amplify (boost), pass or attenuate (cut) some frequency ranges. Many types of filters exist for different audio applications including hi-fi stereo systems, musical synthesizers, effects units, sound reinforcement systems, instrument amplifiers and virtual reality systems.

Solid State Logic Ltd. (SSL) is a British company based in Begbroke, Oxfordshire, England that designs and markets audio mixing consoles, signal processors, and other audio technologies for the post-production, video production, broadcast, sound reinforcement and music recording industries. SSL employs over 160 people worldwide and has regional offices in Los Angeles, Milan, New York City, Paris, and Tokyo, with additional support provided by an international network of distributors. Solid State Logic is part of the Audiotonix Group.

Mains hum, electric hum, cycle hum, or power line hum is a sound associated with alternating current which is twice the frequency of the mains electricity. The fundamental frequency of this sound is usually double that of fundamental 50/60 Hz, i.e.,  100/120 Hz, depending on the local power-line frequency. The sound often has heavy harmonic content above 50/60 Hz. Because of the presence of mains current in mains-powered audio equipment as well as ubiquitous AC electromagnetic fields from nearby appliances and wiring, 50/60 Hz electrical noise can get into audio systems, and is heard as mains hum from their speakers. Mains hum may also be heard coming from powerful electric power grid equipment such as utility transformers, caused by mechanical vibrations induced by magnetostriction in magnetic core. Onboard aircraft the frequency heard is often higher pitched, due to the use of 400 Hz AC power in these settings because 400 Hz transformers are much smaller and lighter.

Tone control is a type of equalization used to make specific pitches or frequencies in an audio signal softer or louder. It allows a listener to adjust the tone of the sound produced by an audio system to their liking, for example to compensate for inadequate bass response of loudspeakers or earphones, tonal qualities of the room, or hearing impairment. A tone control circuit is an electronic circuit that consists of a network of filters which modify the signal before it is fed to speakers, headphones or recording devices by way of an amplifier. Tone controls are found on many sound systems: radios, portable music players, boomboxes, public address systems, and musical instrument amplifiers.

<span class="mw-page-title-main">RIAA equalization</span> Specification for the recording and playback of phonograph records

RIAA equalization is a specification for the recording and playback of phonograph records, established by the Recording Industry Association of America (RIAA). The purposes of the equalization are to permit greater recording times, to improve sound quality, and to reduce the groove damage that would otherwise arise during playback.

<span class="mw-page-title-main">Distortion (music)</span> Type of electronic audio manipulation

Distortion and overdrive are forms of audio signal processing used to alter the sound of amplified electric musical instruments, usually by increasing their gain, producing a "fuzzy", "growling", or "gritty" tone. Distortion is most commonly used with the electric guitar, but may also be used with other electric instruments such as electric bass, electric piano, synthesizer and Hammond organ. Guitarists playing electric blues originally obtained an overdriven sound by turning up their vacuum tube-powered guitar amplifiers to high volumes, which caused the signal to distort. While overdriven tube amps are still used to obtain overdrive, especially in genres like blues and rockabilly, a number of other ways to produce distortion have been developed since the 1960s, such as distortion effect pedals. The growling tone of a distorted electric guitar is a key part of many genres, including blues and many rock music genres, notably hard rock, punk rock, hardcore punk, acid rock, grunge and heavy metal music, while the use of distorted bass has been essential in a genre of hip hop music and alternative hip hop known as "SoundCloud rap".

De-essing is any technique intended to reduce or eliminate the excessive prominence of sibilant consonants, such as the sounds normally represented in English by "s", "z", "ch", "j" and "sh", in recordings of the human voice. Sibilance lies in frequencies anywhere between 2 and 10 kHz, depending on the individual voice.

A smiley face curve or mid scoop in audio signal processing is a target frequency response curve characterized by boosted low and high frequencies coupled with reduced midrange frequency power. This curve is often attained by users employing a graphic equalizer, which shows a graphic representation of a "smile" using its frequency band faders to form a curve that sweeps upwards at each end of the frequency spectrum. Smiley face curves have been popular with some car audio enthusiasts, disc jockeys, electric bass players, home stereo owners and sound reinforcement operators. Though the graphic equalizer was intended to tailor a system's response to compensate for venue and performance conditions, the smiley face curve is sometimes applied as a purely stylistic effect.

Crown International, or Crown Audio, is an American manufacturer of audio electronics, and is a subsidiary of Harman International Industries, which has been part of South Korea-based Samsung Electronics since 2017. Today, the company is known primarily for its power amplifiers, but has also manufactured microphones, loudspeakers, and a line of commercial audio products, as well as digital audio networking products.

<span class="mw-page-title-main">Audio mixing (recorded music)</span> Audio mixing to yield recorded sound

In sound recording and reproduction, audio mixing is the process of optimizing and combining multitrack recordings into a final mono, stereo or surround sound product. In the process of combining the separate tracks, their relative levels are adjusted and balanced and various processes such as equalization and compression are commonly applied to individual tracks, groups of tracks, and the overall mix. In stereo and surround sound mixing, the placement of the tracks within the stereo field are adjusted and balanced. Audio mixing techniques and approaches vary widely and have a significant influence on the final product.

A mixing engineer is responsible for combining ("mixing") different sonic elements of an auditory piece into a complete rendition, whether in music, film, or any other content of auditory nature. The finished piece, recorded or live, must achieve a good balance of properties, such as volume, pan positioning, and other effects, while resolving any arising frequency conflicts from various sound sources. These sound sources can comprise the different musical instruments or vocals in a band or orchestra, dialogue or Foley in a film, and more.

<span class="mw-page-title-main">Equalization (audio)</span> Changing the balance of frequency components in an audio signal

Equalization, or simply EQ, in sound recording and reproduction is the process of adjusting the volume of different frequency bands within an audio signal. The circuit or equipment used to achieve this is called an equalizer.

<span class="mw-page-title-main">Audio forensics</span>

Audio forensics is the field of forensic science relating to the acquisition, analysis, and evaluation of sound recordings that may ultimately be presented as admissible evidence in a court of law or some other official venue.

<span class="mw-page-title-main">Manley Laboratories</span> American audio equipment manufacturer

Manley Laboratories, Inc. is an American manufacturer of pro audio and high-end audio equipment located in Chino, California.

<span class="mw-page-title-main">Electro-Voice RE20</span> Professional broadcasting and music microphone

The Electro-Voice RE20 is an American professional cardioid dynamic microphone, commonly used in broadcasting applications since 1968. Designed by Electro-Voice using the company's patented Variable-D technology and a large-diaphragm element, it has been described as an industry standard "iconic" microphone for its natural sound and its wide usage in radio, television and recording studios. In 2015, the RE20 was inducted into the TEC Awards Technology Hall of Fame.

References

  1. ↑ "TECnology Hall of Fame 2005". TEC Awards. 2005. Retrieved December 6, 2024.
  2. 1 2 Williams, Mark. "A Brief History of the Pultec Company". Pulse Techniques. Retrieved December 6, 2024.
  3. 1 2 3 4 Silverstein, David (April 10, 2017). "How two guys in New Jersey created the most desirable equalizer: Pultec EQP-1A". Audio Hertz. Retrieved December 5, 2024.
  4. 1 2 3 4 5 6 Robjohns, Hugh (February 2019). "Pulse Techniques EQP-1A". Sound On Sound. Retrieved December 11, 2024.
  5. 1 2 Schmidt Horning, Susan (2013). Chasing Sound: Technology, Culture & the Art of Studio Recording from Edison to the LP. Baltimore, United States: Johns Hopkins University Press. p. 114. ISBN   978-1-4214-1848-3.
  6. ↑ Reilly, Bryan (November 2017). "The History Of Pultec And The Storied EQP-1 & EQP-1A". Vintage King. Retrieved December 11, 2024.
  7. 1 2 3 Reumers, Robin (August 29, 2018). "Demystifying the 'Magic" of the Pultec EQ". Abbey Road Institute. Retrieved December 5, 2024.
  8. ↑ Colic, Jamie. "The two famous Pultec EQ units are the EQP-1A Program Equaliser and MEQ-5 Mid band Equaliser". Mixdown. Retrieved December 6, 2024.
  9. ↑ "Pultec Price List" (PDF). technicalaudio.com. Retrieved December 11, 2024.
  10. ↑ "Historic Gear & Instruments". Abbey Road. Retrieved December 11, 2024.
  11. ↑ Massey, Howard (2015). The Great British Recording Studios. Lanham, Maryland, US: Rowman & Littlefield. p. 15. ISBN   978-1-4584-2197-5.
  12. ↑ Shilling, George (June 2001). "Manley EQP1-A" (PDF). Studio Sound. Retrieved December 11, 2024.
  13. ↑ "1951 Pulse Techniques Pultec EQP-1 Program Equalizer". Mix. September 1, 2006. Retrieved December 5, 2024.
  14. ↑ Robjohns, Hugh (October 2010). "Cartec EQP1A". Sound On Sound. Retrieved December 6, 2024.
  15. 1 2 Fuston, Lynn (January 3, 2019). "Pultec EQ Shootout – with Sound Samples". Sweetwater. Retrieved December 5, 2024.
  16. ↑ Tubbs, Alan (May 2015). "Warm Audio EQP-WA". Sound On Sound. Retrieved December 6, 2024.
  17. ↑ Robjohns, Hugh (June 2014). "Wes Audio LC EQP". Sound On Sound. Retrieved December 6, 2024.
  18. ↑ Shanks, Will (April 2004). "Analog Obsession: The Pultec Family". Universal Audio. Retrieved December 5, 2024.
  19. ↑ Shaw, Dan (October 7, 2020). "The Pultec EQ: the humble hero of the studio". Happy. Retrieved December 5, 2024.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.