 | |
| Developer | Briel Computers |
|---|---|
| Release date | 2003 |
| Introductory price | US$149.00 |
| CPU | 6502 or 65C02 @ 1 MHz |
| Memory | 32 KB SRAM, 8 KB EEPROM |
| Display | 40x24 character text |
The Replica 1 is a clone of the historic Apple I of 1976. [1] [2] It was designed by Vince Briel in 2003. It was the first Apple 1 clone to take advantage of more modern components, enabling the clone to be produced with cheaper and more widely available components while retaining the functionality of the original. [3]
The Replica 1 is a clone of the Apple I designed by Vince Briel with permission from the Apple I's original creator Steve Wozniak. [4] The Replica 1 is functionally a close copy of the original but it was designed using much more modern parts on a smaller, simplified board design. The Replica 1 is designed around the same MOS Technology 6502 chip used as the core of the Apple I. Like the original, the Replica 1 utilizes simple AV in/out to connect to a television or other similar screen. It maintains most of the original's functionality, such as the lack of a "delete" key.
Briel has described how his first prototype was developed on a (solderless) breadboards, with confirmation of success being the detection of bits corresponding to an "\" character on the output of the Peripheral Interface Adapter chip. [5] Briel said his next prototype breadboard [lower-alpha 1] used a microcontroller to output to a terminal or terminal emulator program. [5] [lower-alpha 2] The final prototype used a printed circuit board, and had the addition of a circuitry that implemented a 40x24 character output as per the Apple I. [5] The only change from this prototype to the first revision a production board was the addition of a PS/2 keyboard connector. [5] [lower-alpha 3]
The first commercial revision of the Replica 1 came with a separate Serial I/O card, [6] This allowed programs written on or for the Replica 1 to be stored on the hard drive of any common PC. This was needed because the Replica 1 had no other means of program storage, since cassette drives (the Apple I's storage device) are in short supply. The I/O card can also be attached to original Apple I computers.[ citation needed ]
Apple had no objection to the project since Wozniak had given his approval and the design is technically Wozniak's alone since it predates the company itself. Apple had previously released all materials regarding the Apple I to the Apple I Owners Club.[ citation needed ]
The Replica 1 was first introduced to the market between 2003, [7] and 2005. [8] It was always provided both as a build-it-yourself kit as well as pre-assembled. [5] [9] Power was provided via a 12 pin connector compatible with a PC/XT power supply. [8] Input could be from an ASCII-style keyboard as used in Apple, the more commonly available standard PC keyboard connected via PS/2-style connector, or a terminal or terminal emulator connected via the optional add-on piggy-back serial card. [8] AVR microcontrollers were used both for the video control circuitry and keyboard interface. [8]
There was a special connector electrically compatible with the Apple 1 interface but which required an expansion card to provide the correct physical interface. [8] The board also contained a small breadboard area where custom circuitry and components could be fitted. [8] An example of use of the breadboard area is Tranter's automatic power-on-reset modification using a 555 timer chip. [10]
As well as the Woz [lower-alpha 4] monitor, the Replica 1 included (integer) Apple I BASIC in ROM to allow quick and easy programming. [8]
Memory was provided by a 32K byte 62256 static RAM Chip. [8] [lower-alpha 5]
The Second Edition (SE) was introduced in 2006, the redesign bringing several connectors to the board and sacrificing the breadboard area for the associated circuitry. [12] The SE allowed for multiple options for powering the Replica 1: external 20 pin ATX standard PC power supply; 7-9 volt DC jack connector; or optional power via USB port. [12] A serial port was fitted to the board eliminating the need for the piggy-back board. [12]
The video output could prove problematic with this version especially on some equipment with the issues likely worse on European 60 Hz based display systems. [12]
With the SE version the firmware EEPROM was also to include the KRUSADER symbolic assembler.{Sfn| specifically developed by for the Replica 1. [12] KRUSADER was developed by Ken Wessen, who described its programming environment as including a simple shell, editor, disassembler and a low-level debugger all fitting within a space of under 4096 bytes. [13]
The Third Edition (TE) was introduced in 2008 and replaced the ATMega circuits with a Parallax Propeller chip to control the video output and keyboard input, the resultant space saving meaning a prototyping breadboard area could be re-introduced to the design. [14] Expansion was supplemented by an Apple 1 compatible 44 pin expansion slot and edge connector allowing an Apple 1 compatible add-on card to be directly slotted into the Replica 1. [14] USB was eliminated from this board. [14]
In 2013, on the tenth anniversary of the creation of the Replica 1, Briels introduced a version known as the TEN which has a limited run of 50 boards notable for using a red colored board.[ citation needed ] For most practical purposes these were the same as the Replica 1 plus that was to follow a year later.[ citation needed ]
The most recent model of the Replica 1 is the Replica 1 Plus, now sold by ReActivemicro. The Second Edition model integrated both the previous Serial I/O board plus a new USB interface into the main board. Other improvements included a wall mounted DC power supply replacing the previous model's reliance on a full PC power supply and a power on light indicator. The Third Edition model removed the USB interface and replaced the AVR microcontroller used to generate video with a Parallax Propeller chip.[ citation needed ]
Briel's announcement for the Replica 1 Plus version in May 2014 claimed it allowed for a direct connection to the USB port on a computer for power and programming, and it had two firmware ROMs allowing selection of either Apple 1 Basic or Woz monitor and Applesoft lite. [15]
On 1 March 2018 ReActiveMicro announced they had formed a partnership with Briel and henceforth would be selling and supporting Replica 1 plus. [16] [9]
Some care is required in assembling Replica 1 in particular proficient soldering technique is required. [17] At KansasFest in July 2009 Briel held a workshop to help new Replica 1 owners construct their machine, Computerworld magazine editor Ken Gagne documenting errors he made in process of completing a working machine. [18]
The original and Second Edition (SE) versions of the Replica 1 did not contain an Apple 1 compatible expansion connector (slot), but instead there was available an expansion board that could be connected and that did contain additional expansion slots. The Third Edition (TE) and later models do contain an Apple 1 compatible slot which can either be used to connect an additional Apple 1 compatible add-on board or to connect to the expansion board so additional original Apple or third party expansion boards can be attached. [19] Expansion boards included the CFFA1 Card Reader and Multi I/O Board by Briel Computers.
Other connectors include (model dependent):
The Apple Computer 1 (Apple-1), later known predominantly as the Apple I, is an 8-bit motherboard-only personal computer designed by Steve Wozniak and released by the Apple Computer Company in 1976. The company was initially formed to sell the Apple I – its first product – and would later become the world's largest technology company. The idea of starting a company and selling the computer came from Wozniak's friend and Apple co-founder Steve Jobs. One of the main innovations of the Apple I was that it included video display terminal circuitry on its circuit board, allowing it to connect to a low-cost composite video monitor or television, instead of an expensive computer terminal, compared to most existing computers at the time. It and the Sol-20 were some of the first home computers to have this capability.
The Apple II is a personal computer released by Apple Inc. in June 1977. It was one of the first successful mass-produced microcomputer products and is widely regarded as one of the most important personal computers of all time due to its role in popularizing home computing and influencing later software development.
The IBM Personal Computer is the first microcomputer released in the IBM PC model line and the basis for the IBM PC compatible de facto standard. Released on August 12, 1981, it was created by a team of engineers and designers at International Business Machines (IBM), directed by William C. Lowe and Philip Don Estridge in Boca Raton, Florida.
A motherboard is the main printed circuit board (PCB) in general-purpose computers and other expandable systems. It holds and allows communication between many of the crucial electronic components of a system, such as the central processing unit (CPU) and memory, and provides connectors for other peripherals. Unlike a backplane, a motherboard usually contains significant sub-systems, such as the central processor, the chipset's input/output and memory controllers, interface connectors, and other components integrated for general use.
A sound card is an internal expansion card that provides input and output of audio signals to and from a computer under the control of computer programs. The term sound card is also applied to external audio interfaces used for professional audio applications.
The Tandy 1000 was the first in a series of IBM PC compatible home computers produced by the Tandy Corporation, sold through its Radio Shack and Radio Shack Computer Center stores. Introduced in 1984, the Tandy 1000 line was designed to offer affordable yet capable systems for home computing and education. Tandy-specific features, such as enhanced graphics, sound, and a built-in joystick port, made the computers particularly attractive for home use.
The Apple IIe is the third model in the Apple II series of personal computers produced by Apple Computer. It was released in January 1983 as the successor to the Apple II Plus. The e in the name stands for enhanced. It is the first Apple II with built-in lowercase and 80-column text support, as well as 64K RAM, while reducing the total chip count from previous models by approximately 75%.
AVR is a family of microcontrollers developed since 1996 by Atmel, acquired by Microchip Technology in 2016. These are modified Harvard architecture 8-bit RISC single-chip microcontrollers. AVR was one of the first microcontroller families to use on-chip flash memory for program storage, as opposed to one-time programmable ROM, EPROM, or EEPROM used by other microcontrollers at the time.
The Apple IIc is a personal computer introduced by Apple Inc. shortly after the launch of the original Macintosh in 1984. It is essentially a compact and portable version of the Apple IIe. The IIc has a built-in floppy disk drive and a keyboard, and was often sold with its matching monitor. The c in the name stands for compact, referring to the fact it is a complete Apple II setup in a smaller notebook-sized housing. It is compatible with a wide range of Apple II software and peripherals.
In a computer system, a chipset is a set of electronic components on one or more integrated circuits that manages the data flow between the processor, memory and peripherals. The chipset is usually found on the motherboard of computers. Chipsets are usually designed to work with a specific family of microprocessors. Because it controls communications between the processor and external devices, the chipset plays a crucial role in determining system performance. Sometimes the term "chipset" is used to describe a system on chip (SoC) used in a mobile phone.
The MPU-401, where MPU stands for MIDI Processing Unit, is an important but now obsolete interface for connecting MIDI-equipped electronic music hardware to personal computers. It was designed by Roland Corporation, which also co-authored the MIDI standard.
The PS/2 port is a 6-pin mini-DIN connector used for connecting keyboards and mice to a PC compatible computer system. Its name comes from the IBM Personal System/2 series of personal computers, with which it was introduced in 1987. The PS/2 mouse connector generally replaced the older DE-9 RS-232 "serial mouse" connector, while the PS/2 keyboard connector replaced the larger 5-pin/180° DIN connector used in the IBM PC/AT design. The PS/2 keyboard port is electrically and logically identical to the IBM AT keyboard port, differing only in the type of electrical connector used. The PS/2 platform introduced a second port with the same design as the keyboard port for use to connect a mouse; thus the PS/2-style keyboard and mouse interfaces are electrically similar and employ the same communication protocol. However, unlike the otherwise similar Apple Desktop Bus connector used by Apple, a given system's keyboard and mouse port may not be interchangeable since the two devices use different sets of commands and the device drivers generally are hard-coded to communicate with each device at the address of the port that is conventionally assigned to that device.
The Commodore 64 home computer used various external peripherals. Due to the backwards compatibility of the Commodore 128, most peripherals would also work on that system. There is also some compatibility with the VIC-20 and Commodore PET.
The Apple IIc Plus is the sixth and final model in the Apple II series of personal computers, produced by Apple Computer. The "Plus" in the name was a reference to the additional features it offered over the original portable Apple IIc, such as greater storage capacity, increased processing speed, and a general standardization of the system components. In a notable change of direction, the Apple IIc Plus, for the most part, did not introduce new technology or any further evolutionary contributions to the Apple II series, instead merely integrating existing peripherals into the original Apple IIc design. The development of the 8-bit machine was criticized by quarters more interested in the significantly more advanced 16-bit Apple IIGS.
Apple II peripheral cards are expansion cards that work with the Apple II series of computers. They plug in to slots on the motherboard.
Minimig is an open source re-implementation of an Amiga 500 using a field-programmable gate array (FPGA).
The Apple II Plus is the second model of the Apple II series of personal computers produced by Apple Computer. It was sold from June 1979 to December 1982. Approximately 380,000 II Pluses were sold during its four years in production before being replaced by the Apple IIe in January 1983.
A single-board microcontroller is a microcontroller built onto a single printed circuit board. This board provides all of the circuitry necessary for a useful control task: a microprocessor, I/O circuits, a clock generator, RAM, stored program memory and any necessary support ICs. The intention is that the board is immediately useful to an application developer, without requiring them to spend time and effort to develop controller hardware.
Maximite Microcomputer is a Microchip PIC32 microcontroller-based microcomputer. This series of chips uses the MIPS 32-bit RISC MIPS architecture and was neither an ARM nor PIC variant. Originally designed as a hobby kit, the Maximite was introduced in a three-part article in Silicon Chip magazine in autumn of 2011 by Australian designer Geoff Graham. The project consists of two main components — a main circuit board and the MMBasic Interpreter, styled after GW-BASIC.
