Riley Nine

Last updated

Riley Nine
Riley Riley Nine Merlin reg jan 37 1056 cc.jpg
1937 Riley Nine with steel Merlin body by Briggs
Overview
Manufacturer Riley (Coventry) Limited
Production1926–1938
Designer Percy and Stanley Riley
Body and chassis
Body style
  • open 2-seater
  • through to
  • 4-door saloon
  • in many variations
Related Riley 12/6
Powertrain
Engine 1.1 L I4
Dimensions
Wheelbase 106 in (2,692 mm)
Width57 in (1,448 mm)

The Riley Nine was one of the most successful light sporting cars produced by the British motor industry in the inter war period.[ citation needed ] It was made by the Riley company of Coventry, England with a wide range of body styles between 1926 and 1938.

Contents

Riley Nine engine
Layout
Configuration I4
Displacement 1.1 L (1,087 cc)
Cylinder bore 60.3 mm
Piston stroke 95.2 mm
Block material
  • cast iron block inc. top half crankcase mounted on rubber bushings
  • two bearing crankshaft
Head material
  • cast iron with hemispherical combustion chambers.
  • aluminium alloy pistons with 2 rings and oil scraper
Valvetrain
  • OHV inclined at 45 degrees
  • operated by pushrods from
  • twin camshafts mounted high in the block
Combustion
Fuel systemcarburettor with hot spot piped from exhaust
Management timing by gear with hand control
Fuel typepetrol
Oil system forced lubrication
Cooling system
  • V-shaped film radiator mounted on rubber
  • water circulates naturally
  • fan fitted for overseas use
Output
Power output not published
Emissions
Emissions control technology none

Design

The car was largely designed by two of the Riley brothers, Percy and Stanley. Stanley was responsible for the chassis, suspension and body and the older Percy designed the engine.

Engine

The 1,087 cc four-cylinder engine had hemispherical combustion chambers with the valves inclined at 45 degrees in a crossflow head. To save the expense and complication of overhead camshafts, the valves were operated by two camshafts mounted high in the crankcase through short pushrods and rockers. The engine was mounted in the chassis by a rubber bushed bar that ran through the block with a further mount at the rear of the gearbox. Drive was to the rear wheels through a torque tube and spiral bevel live rear axle mounted on semi elliptic springs.

Initially produced with a cone clutch drive train it quickly evolved to have a plate clutch driving through a Silent Third gearbox, then all helical dog change box to an ENV pre-selecta epicyclic gearbox. The engine gradually became stronger, gaining extra webs and internal oil feed to the rockers. The final iteration in the Merlin series gained a single plunger oil pump, replacing the double plunger, and an oil filter amongst many other updates.

Bodies

At launch in July 1926 two body styles were available, a fabric bodied saloon called the Monaco at £285 and a fabric four-seat tourer for £235. The saloon could reach 60 mph (97 km/h) and give 40 mpgimp (7.1 L/100 km; 33 mpgUS). Very quickly a further two bodies were offered, the San Remo, an artillery wheeled basic saloon and a two-seater plus dickie open tourer and there was also the option of steel panelling rather than fabric for the four-seater tourer.

The thirties saw further models introduced, 1933 being particularly busy, with the 2 door Lynx, Kestrel, and Falcon all appearing. With each year customers demands for more refinement saw the cars get heavier and heavier so that by 1934 the Monaco and Kestrel were of all Aluminium coachbuilt construction. The Lynx gained 4 doors and lost the disappearing hood.

The Riley Imp, a sports version, was produced in the years 1934-1935, with a prototype version being displayed at the 1933 Motor Show at Olympia, London [1] . The Imp gained quite a reputation for its good looks with swept back wings. Light bodied competition versions gained success in the 1934 Ulster Tourist Trophy, thereafter being known as the Riley Ulster Imp. [2] Kay Petre and Dorothy Champney took 13th place in the 1934 Le Mans race in a standard bodied Riley Imp with competition chassis and drivetrain. [3]

Revisions

After the car's 1926 launch, Mark 1 production actually started in 1927 at Percy's engine factory, due to some resistance in the main works to the new design. It was such a critically acclaimed success that after fewer than a thousand cars had been produced the works quickly shut down side-valve production and tooled up for the new Nine in early 1928. This switch to the main factory coincided with several modernisations of the Mark 1 - the cone clutch was dropped, the gear lever and handbrake were moved from the right to the centre of the car and a Riley steering box was adopted, thus making the car the Mark II. The Mark III was a gentle update of the II at the end of 1928, evolving stronger wheels and a different arrangement of rods to the rear brakes.

The Mark IV was a thorough re working of the Nine. Heavier Riley-made 6-stud hubs and axles replaced the bought-in five-stud items. A new cable braking system was introduced with larger drums. The range of bodies was further extended in 1929 with the Biarritz saloon which was a de-luxe version of the Monaco. The improved brakes were fitted using the Riley continuous cable system and if the cable stretched it could be adjusted from the driver's seat.

The Plus series saw the fuel tank moved to the rear of the chassis and an Autovac adopted, whilst the Plus Ultra adopted a new chassis that dropped between the axles, lowering the car.

More body variants were added over the next few years and in 1934 a Preselector gearbox was offered for £27 extra. The range was slimmed down in 1935 to the Monaco saloon, Kestrel streamlined saloon and Lynx four-seat tourer as the works started gearing up for production of the new 12 hp model.

Steel bodies

In an attempt to keep costs down Riley entered into an agreement with Briggs Manufacturing to produce a steel (non coach-built) body for a newly designed chassis. This new chassis was introduced in 1936 and incorporated such features as Girling rod operated brakes and a prop shaft final drive for the Nine (though the 12 hp variant retained the torque tube). The Briggs body was named the Merlin and was available alongside the last nine Kestrel variant, also built on the "Merlin" chassis. (This body was also used on the narrow track 12/4 chassis as a Falcon, replacing its coachbuilt body.) The Kestrel 9 was also adapted to suit the new Merlin chassis, unfortunately perhaps, also adopting the heavier looking Merlin wings.

The Briggs body evolved through 1937 with a large boot extension to be called the Touring Saloon and an additional body style was added on the same chassis - the higher specified special series Monaco (a completely new design from the previous car). The final version (and last nine model) was the 1938 Victor also available with 1496 cc engine. The Victor had the engine further forward to increase interior room, with the battery moved to the engine bay and smaller diameter wheels were fitted.

The Riley company was bought by Lord Nuffield in 1938 and Nine production ceased as the company pursued a strict two-engine line up, continued after the war with the RM series.

Some catalogued bodies

TypeYearNotes
Monaco1926-1932Fabric bodied Saloon
Four-seat tourer1926- 1931Fabric or steel bodied
Speed Model (Brooklands)1927-1931Low chassis, cycle wings and pointed tail. Tuned 50 bhp (37 kW) engine.
San Remo1928- 1929Fabric saloon
2 Seater Tourer1928- 1930Steel bodied
Biarritz1929- 1932De Luxe saloon
Plus Series1931- 1932Rear fuel tank
Plus Ultra1932- 1933Chassis dropped between axles
Gamecock1931-1932Open two-seater
Kestrel1933-19364 light Streamlined saloon
Monaco1933-1935All alloy bodied version
Falcon1933-1935Saloon with twin rear windows
Lincock1933-1935Fixed head coupé
Ascot1933-1935Drop head coupé
Lynx1933-1936Four-seat tourer
March Special1933-1935two/four-seat sports tourer built by John Charles of Kew to the design of driver Freddie March
Imp1934-193575 mph (121 km/h) sports version
Merlin1936-19374 light all steel streamlined saloon
Victor1938Re-worked Merlin saloon


Some saloons
1928 Monaco (fabric) Riley 9 Monaco Saloon (1928) (15217604193).jpg
1928 Monaco (fabric)
1930 Biarritz 1931 Riley Nine Biarritz (cropped).jpg
1930 Biarritz
1934 Kestrel 1934 Riley Kestrel 1100 Saloon at Capel Manor, Enfield, London, England 2.jpg
1934 Kestrel
1935 Merlin Riley Merlin 1935 (9057630159).jpg
1935 Merlin
1937 Merlin (all steel) Riley Riley Nine Merlin reg jan 37 1056 cc.jpg
1937 Merlin (all steel)
Open two-seaters
1929 Speed 1929 Riley Nine Special (cropped).jpg
1929 Speed
1931 Brooklands 1931 Riley 9 Brooklands 2 Seater Sports - fvl.jpg
1931 Brooklands
1931 Gamecock Riley 9 Gamecock (1931) (15024490176).jpg
1931 Gamecock
Imp (1934-1935) Riley Imp 000 000 1934-1935 1935 backleft 2012-04-08 A (cropped).jpg
Imp (1934-1935)
1935 Imp Riley Imp (7964381466).jpg
1935 Imp
Tourers
1928 Special 4-door tourer (fabric) Riley Nine (15372360802) (2).jpg
1928 Special 4-door tourer (fabric)
1934 Plus Ultra 1933 Riley 9 Plus Ultra Sports (31934983464).jpg
1934 Plus Ultra
1933 March special 1933 Riley Nine open 2-seater.jpg
1933 March special
1934 Gloucester special 1934 Riley Nine open 4-seater.jpg
1934 Gloucester special
1934 Lynx Riley Nine Lynx 4 seat Tourer (1934).jpg
1934 Lynx

Hindsight

When compared with its contemporary Hillman Minx it had a sophisticated 1098 cc engine with hemispherical combustion chambers pumping out more than 25 per cent more horsepower than the 1185 cc Hillman. The Riley's ENV preselector gearbox provided easy progress through the gears. The Riley had a magnificent competition record and was adding to it. The Riley body was composite wood and metal, coachbuilt, and a style-leader — fabric top, centre-lock wire wheels. The pressed steel Hillman body, ordinary. The Minx body rusted, the Monaco body rotted. Hillmans outsold Rileys better than 4.5:1 [4]

But a Monaco was nearly double the price of a Minx. While the Monaco's handling was much better there was not a lot of difference in performance, the Minx was even slightly faster in a straight line. With a Riley "special series" twin carburettor engine you might reach 70 mph or 112 km/h. A 1931 Monaco weighed 916 kg, a 1937 model 1 160 kg. In spite of its standard twin carburettors the 1937 Monaco took half a minute to reach 50 mph and could barely exceed 62 mph or 100 km/h. [4]

Related Research Articles

<span class="mw-page-title-main">Riley Motor</span> British motorcar and bicycle manufacturer

Riley was a British motorcar and bicycle manufacturer from 1890. Riley became part of the Nuffield Organization in 1938 and was merged into the British Leyland Motor Corporation in 1968. In July 1969 British Leyland announced the immediate end of Riley production, although 1969 was a difficult year for the UK automotive industry and many cars from Riley's inventory may have been first registered in 1970.

<span class="mw-page-title-main">Rootes Arrow</span> Motor vehicle

Rootes Arrow was the manufacturer's name for a range of cars produced under several badge-engineered marques by the Rootes Group from 1966 to 1979. It is amongst the last Rootes designs, developed with no influence from future owner Chrysler. The range is almost always referred to by the name of the most prolific model, the Hillman Hunter.

<span class="mw-page-title-main">Hillman Minx</span> Motor vehicle

The Hillman Minx was a mid-sized family car that British car maker Hillman produced from 1931 to 1970. There were many versions of the Minx over that period, as well as badge-engineered variants sold by Humber, Singer, and Sunbeam.

<span class="mw-page-title-main">Singer Motors</span> British motor vehicle manufacturer

Singer Motors Limited was a British motor vehicle manufacturing business, originally a bicycle manufacturer founded as Singer & Co by George Singer, in 1874 in Coventry, England. Singer & Co's bicycle manufacture continued. From 1901 George Singer's Singer Motor Co made cars and commercial vehicles.

<span class="mw-page-title-main">Hillman Husky</span> Motor vehicle

The Hillman Husky was a line of British passenger vehicles manufactured between 1954 and 1970 by Hillman.

<span class="mw-page-title-main">Morris Minor (1928)</span> Motor vehicle

The Morris Minor is a small 4-seater car with an 850 cc engine manufactured by Morris Motors Limited from 1928 until 1934. The name was resurrected for another newer car for the same market in 1948.

The MG K-type Magnette is a motor car produced in the United Kingdom by MG from October 1932 to 1934.

<span class="mw-page-title-main">Triumph Super 7</span> Motor vehicle

The Triumph Super 7 is a car manufactured from 1927 until 1934 by the Triumph Motor Company. It was produced as a response to the success of the Austin 7 and was Triumph's first car to be made in large numbers. In 1933 the name was changed to the Triumph Super 8.

<span class="mw-page-title-main">Rover 10</span> Motor vehicle

The Rover 10 was a small family car from the British Rover car company produced between 1927 and 1947.

<span class="mw-page-title-main">Wolseley Hornet six</span> Motor vehicle

The Wolseley Hornet is a six-cylinder twelve fiscal horsepower lightweight automobile which was offered as a saloon car, coupé and open two-seater as well as the usual rolling chassis for bespoke coachwork. Produced by Wolseley Motors Limited from 1930 until 1936, the Hornet was unveiled to the public at the end of April 1930. Wolseley had been bought from the receivers by William Morris in 1927.

<span class="mw-page-title-main">Rover Meteor</span> Motor vehicle

The Rover Meteor was a short-lived 2½-litre or 2-litre medium-sized car made by The Rover Company Limited of Meteor Works Coventry. The new 2½-litre model was announced in mid-February 1930 to supplement Rover's Light Twenty which used the same engine and essentially the same chassis.

<span class="mw-page-title-main">Austin 12/6</span> Motor vehicle

The Austin Light Twelve-Six is a 14 tax horsepower car with a 1496 cc engine that was introduced by Austin in January 1931. It was named by Austin Light Twelve to separate it from the well-established Austin Twelve. The general public then dubbed the original Twelve Heavy Twelve but Austin never used that name. The Light Twelve-Six remained in production until 1936.

<span class="mw-page-title-main">Hillman 14</span> Motor vehicle

The Hillman Fourteen is a medium-sized 4-cylinder car announced by Hillman's managing director Spencer Wilks, a son-in-law of William Hillman, at the end of September 1925. This new Fourteen substantially increased Hillman's market share and remained on sale into 1931. During this time it was the main product of the company.

<span class="mw-page-title-main">Riley 12/6</span> Motor vehicle

The Riley 12/6 was a car made by the British Riley company from late 1932 to 1935.

<span class="mw-page-title-main">Hillman Wizard</span> Motor vehicle

The Hillman Wizard is a six-cylinder car produced by Hillman between 1931 and 1933. Production began in April 1931 and continued until 1933.

<span class="mw-page-title-main">Lanchester Fourteen</span> Motor vehicle

The Lanchester Fourteen Roadrider is a six-cylinder automobile introduced by the Lanchester Motor Company in the beginning of September 1936. It was named "Roadrider" for its special suspension features, and billed as the lowest-priced six-cylinder Lanchester ever offered. This car replaced the previous 12 hp Light Six model with a larger six-cylinder engine again in the Lanchester Eleven chassis and body.

The Rover Fourteen was a medium-sized family car and variants produced by the British Rover car company between 1924 and 1948. Civilian automobile production was interrupted in 1940 because of the war, but when the war ended in 1945, the Rover 14 returned to the market and remained available until replaced by the Rover 75 at the beginning of 1948.

<span class="mw-page-title-main">Riley 12/4</span> Motor vehicle

The Riley 12/4, or from 1936 the Riley 1½-litre, is a range of cars made from 1935 to 1938 by the British Riley company available with saloon, touring, and sports/racing coachwork,

<span class="mw-page-title-main">Hillman 20</span> Motor vehicle

The Hillman Wizard 75, Hillman Twenty 70, Hillman Hawk and their long wheelbase variants Hillman Seven Seater and Hillman 80 models were a series of 20 horsepower medium priced 5-7 seater executive cars made by Hillman during the 1930s.

<span class="mw-page-title-main">Morris Oxford Six</span> Touring car manufactured by Morris Motors Ltd.

The Morris Oxford Six is a motor car produced by Morris of the United Kingdom from 1921 until 1926, and again from 1929 until 1935. Initially produced as a straight-six engined version of the Morris Oxford bullnose, the original Oxford Six was the first car produced by Morris with a six-cylinder engine, but proved to be unreliable. The versions produced from 1929 onwards were introduced as a replacement for the Morris Oxford 16/40.

References

  1. The Riley Imp Histories and Profiles, John Gathercole, 2008
  2. Riley Imp rileyarchives.com, accessed 2 June 2019
  3. "Kay Petre | Motor Sport Magazine Database". Motor Sport Magazine. 12 June 2017. Retrieved 11 March 2020.
  4. 1 2 page 161, Michael Sedgwick, Cars of the Thirties and Forties, Hamlyn, London 1979 ISBN   0600321487