Rocky Mountain Rail Society

Last updated February 19, 2022

The Rocky Mountain Rail Society (RMRS) is a registered nonprofit organization of volunteers dedicated to the preservation of Canadian National Railway steam locomotive 6060, The Spirit of Alberta. Their goal is to ensure that The Spirit of Alberta remains in full and complete operating condition for the enjoyment of steam rail fans.

Society structure and team members

The Rocky Mountain Rail Society operates under a board of directors and a varying number of directors. The key mechanical positions that make up the Mechanical Committee are chief mechanical officer, assistant to the chief mechanical officer and rolling stock operations officer. All planning for repairs, modifications and maintenance of any RMRS equipment must be done in consultation with and under the approval of the Mechanical Committee. A volunteer coordinator is also appointed to manage all volunteer resources and scheduling.

Team member roles

Chief Mechanical Officer – Responsible for the planning, scheduling and expenditure of all repairs and maintenance. Reports to the Board of Directors.
Assistant to the Chief Mechanical Officer – responsible for the planning, scheduling and expenditure of all repairs and maintenance when the Chief Mechanical Officer is not available to fill these duties. Reports to the Board of Directors.
Rolling Stock Operations Officer – responsible for the planning, scheduling and expenditure of all repairs and maintenance required on RMRS rolling stock. Reports to the Board of Directors.
Volunteer Coordinator – responsible for managing volunteer resources with respect to training and scheduling.
Volunteer Workers – responsible for conducting work on the locomotives and rolling stock under the direction of the Mechanical Committee and Volunteer Coordinator.

Society operation

The Society's excursions consist of providing 6060 as steam power to a number of runs of Alberta Prairie Railway Excursions (APRE) tourist trains which are operated on a regular weekend schedule from mid-May to mid-October. (Special event runs also occur at other dates in the year). The railway normally uses its own steam locomotive, number 41, or a diesel for these runs but on 12 days each summer RMRS provides 6060 as power. The trips occur along old rail lines of the Canadian Northern Railway between Stettler and Big Valley in Alberta, Canada. The length of this run is 48 miles round trip. As there is no capacity to turn locomotives at the Big Valley end point, 6060 runs in reverse to that location, and then returns in a forward direction to Stettler.

History of CNR 6060

6060 (affectionately known as Bullet-nosed Betty) was assembled in Canada's Montreal Locomotive Works in October 1944 under builder's number 72757. In 1959, 6060 was retired from active service and was subsequently placed on static display in Jasper, Alberta in 1962. Ten years later, Canadian National Railway restored 6060 to operating condition, and used her to haul steam excursions out of Toronto, Ontario.

In 1980, to commemorate the Province of Alberta's 75th anniversary, 6060 was presented to the people of Alberta as a gift. After more than five years of retirement, she was restored a second time with the help of the Province of Alberta and, most notably, volunteers from the Rocky Mountain Rail Society. 6060 travelled under her own power to Vancouver, British Columbia, in 1986 to participate in the Steam Expo, part of the World's Fair.

After several years of storage at the Alberta Railway Museum near Edmonton, she was moved to Stettler in 1998 to operate regularly in the service of Alberta Prairie Steam Tours. More than a decade later, she continues to transport thousands of excursion passengers every summer. This impressive mountain-type engine is considered to be one of the best remaining examples of a modern steam locomotive, and, in addition to being Canada's largest operating steamer, is currently North America's only operating mountain-type engine.

6060's design is an extension of CNR Northern U-2-g design (4-8-4) which was able to run through divisional points where other engines would need to be serviced, and established performance records. One such locomotive ran 18,353 miles in one month, and it was typical for the design to run without change from Montreal, Quebec, to Halifax, Nova Scotia, for a total of 841 miles. As a result of being constructed during World War II when the need for more locomotives was high but the ready supply of iron was low, the U-1-f class of 4-8-2s, of which 6060 was the first, were lighter and more versatile locomotives than the U-2 Northerns. 6060 rolled off the erecting floor at Montreal Locomotive Works early in October 1944. In spite of being 20 tons lighter than the U-2s, the performance of the U-1-f class was undiminished and they quickly took over prestigious passenger runs, capable of easily maintaining speeds of 75 mph. 6078, a classmate of 6060, made the run from Toronto to Sarnia, Ontario in two hours and fifty-eight minutes at an average speed (including water stops) of 58.7 mph. This entire sub-class of engine remained in service until the end of steam on the CNR.^[1]

Related Research Articles

Heritage railway Railway used for heritage/historical/tourism purposes

A heritage railway or heritage railroad is a railway operated as living history to re-create or preserve railway scenes of the past. Heritage railways are often old railway lines preserved in a state depicting a period in the history of rail transport.

The Minnesota Transportation Museum is a transportation museum in Saint Paul, Minnesota, United States.

The Nilgiri Mountain Railway (NMR) is a 1,000 mmmetre gauge railway in Tamil Nadu, India, built by the British in 1908. The railway is operated by the Southern Railway and is the only rack railway in India.

The Royal Hudsons are a series of semi-streamlined 4-6-4 "Hudson" type steam locomotives owned by the Canadian Pacific Railway (CPR) and built by Montreal Locomotive Works (MLW). The engines were built in 1937. In 1939, King George VI allowed the CPR to use the term after Royal Hudson number 2850 transported the royal train across Canada with no need of replacement. These locomotives were in service between 1937 and 1960. Four of them have been preserved. No. 2839 was used to power excursions for the Southern Railway Steam Program between 1979 and 1980. No. 2860 was used for excursion service in British Columbia between 1974 and 1999, then again between 2006 and 2010.

The North Carolina Transportation Museum is a museum in Spencer, North Carolina. It is a collection of automobiles, aircraft, and railway vehicles. The museum is located at the former Southern Railway's 1896-era Spencer Shops and devotes much of its space to the state's railroad history. The museum has the largest collection of rail relics in the Carolinas. Its Back Shop building of nearly three stories high is most notable for its size of two football fields long.

Eastleigh Works is a locomotive, carriage and wagon building and repair facility in the town of Eastleigh, in the county of Hampshire in England.

The Strasburg Rail Road is a heritage railroad and the oldest continuously operating railroad in the western hemisphere as well as the oldest public utility in the Commonwealth of Pennsylvania. Chartered in 1832, the Strasburg Rail Road Company is today a heritage railroad offering excursion trains hauled by steam locomotives and diesel locomotives on 4.5 mi (7.2 km) of track in Pennsylvania Dutch Country, as well as providing freight service to area shippers. The railroad's headquarters are outside Strasburg, Pennsylvania.

Alberta Prairie Railway Excursions is a heritage railway originating in Stettler, Alberta.

The South Simcoe Railway is a steam heritage railway in Tottenham, Ontario, north of Toronto. Operating excursions since 1992, it is the oldest operating steam heritage railway in Ontario and features the second oldest operating steam locomotive in Canada.

Glenreagh Mountain Railway, known as the GMR, was established in 1989 as a heritage tourist railway at Glenreagh, near Coffs Harbour, New South Wales, Australia. GMR's objective is to restore and operate a heritage tourist railway on the Glenreagh to Ulong section of the Glenreagh to Dorrigo railway line.

An excursion train is a chartered train run for a special event or purpose. Examples are trains to major sporting event, trains run for railfans or tourists, and special trains operated by the railway for employees and prominent customers.

The Glenbrook Vintage Railway (GVR) is a heritage steam railway in Glenbrook, New Zealand.

The Indian Railway Service of Mechanical Engineering (IRSME) is one of the group 'A' central engineering services of the Indian railways. The officers of this service are responsible for managing the Mechanical Engineering Division of the Indian Railways.IRSME officers was drawn from the Combined Engineering Service Examination (ESE) conducted by Union Public Service Commission. All appointments to the Group 'A' services are made by the President of India.[7]

The Heart of Dixie Railroad Museum is the official state railroad museum of Alabama. Dedicated to the preservation, restoration, and operation of historically significant railway equipment, the museum is located at 1919 Ninth Street, Calera, Alabama, on I-65 approximately 30 miles (48 km) south of Birmingham.

The Valley Heights Rail Museum is a railway museum located in Valley Heights, New South Wales, Australia. The facility is located 300 metres (980 ft) north-west of Valley Heights railway station. The Museum is operated by two partner organisations:

Canadian Pacific 2816, also known as the "Empress", is a preserved class "H-1b" 4-6-4 Hudson-type steam locomotive built by the Montreal Locomotive Works (MLW) in December 1930 for the Canadian Pacific Railway (CPR); the only non-streamlined H1 Hudson to have survived into preservation.

The Golden Rock Railway Workshop, in Ponmalai, Tiruchirappalli, Tamil Nadu, is one of three railway workshops serving Indian Railways' Southern Railway zone. The workshop is part of the railways' Mechanical Department. The other two Southern Railway workshops are in Perambur, Chennai.

Canadian National Railways U-1-f class locomotives were a class of twenty 4-8-2 or Mountain type locomotives built by Montreal Locomotive Works in 1944. They were numbered 6060–6079 by CN and nicknamed "Bullet Nose Bettys" due to their distinctive cone-shape smokebox door cover.

Canadian Pacific Railway No. 1238 is a preserved G5c class 4-6-2 "Pacific" type steam locomotive built by the Montreal Locomotive Works in 1946. It was purchased along with No. 1286 by George Hart, who used it for excursion service in the 1960s. It was later sold to Jack Showalter, who operated it on his Allegany Central Railroad from the 1970s to the mid-1990s. As of 2022, No. 1238 is stored on the Prairie Dog Central Railway under private ownership while waiting for a future restoration.

Canadian National 6060 is a 4-8-2 Mountain type steam locomotive built in 1944 by the Montreal Locomotive Works as the first of the U-1-f class for the Canadian National Railway (CN).

References

↑ Excerpts from RMRS policy manual authored by Rich Graydon, R.M.R.S.

External links

Coordinates: 52°19′18″N112°42′00″W / 52.3216°N 112.7001°W / 52.3216; -112.7001

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Excerpts from RMRS policy manual authored by Rich Graydon, R.M.R.S.

[1]