The Ford FE engine is a Ford V8 engine used in vehicles sold in the North American market between 1958 and 1976. The FE was introduced to replace the short-lived Ford Y-block engine, which American cars and trucks were outgrowing. It was designed with room to be significantly expanded, and manufactured both as a top-oiler and side-oiler, and in displacements between 332 cu in (5.4 L) and 428 cu in (7.0 L).
The Ford small-block is a series of 90° overhead valve small block V8 automobile engines manufactured by the Ford Motor Company from July 1961 to December 2000.
The Ford Modular engine is Ford Motor Company's overhead camshaft (OHC) V8 and V10 gasoline-powered small block engine family. Despite popular belief that the Modular engine family received its moniker from the sharing of engine parts across numerous Ford vehicle platforms, in reality, the Modular engine family was named as such by Ford Motor Company for the new "modular approach" to the setup of tooling and casting stations in the Windsor and Romeo engine manufacturing plants.
The Buick V6, popularly referred to as the 3800 in its later incarnations, originally 198 cu in (3.2 L) and initially marketed as Fireball at its introduction in 1962, was a large V6 engine used by General Motors. The block is made of cast iron and all use two-valve-per-cylinder iron heads, actuated by pushrods. The engine, originally designed and manufactured in the United States, was also produced in later versions in Australia. It was the first six-cylinder engine designed exclusively for Buick products since the Buick straight-six was discontinued in 1930.
The original Ford Cologne V6 is a series of 60° cast iron block V6 engines produced continuously by the Ford Motor Company in Cologne, Germany, since 1965. Along with the British Ford Essex V6 engine and the U.S. Buick V6 and GMC Truck V6, these were among the first mass-produced V6 engines in the world.
Paxton Automotive is a United States-based manufacturer of superchargers for automotive use. The company is the major proponent of the centrifugal type supercharger. Early products were offered under the McCulloch name. Some Paxton superchargers have been factory fitted, but most units sold have been aftermarket installed. Paxton products are possibly best known for their frequent use in performance-modified Ford Mustangs.
The Essex V6 is a 90° V6 engine family built by the Ford Motor Company at the Essex Engine Plant in Windsor, Ontario, Canada. This engine is unrelated to Ford's British Essex V6. Introduced in 1982, versions of the Essex V6 engine family were used in subcompact through to large cars, vans, minivans, and some pickup trucks. The Essex V6 was last used in the 2008 regular-cab F-150, after which it was succeeded by a version of the Ford Cyclone engine. An industrial version of the engine was available until 2015.
The Shelby Mustang is a high-performance variant of the Ford Mustang built by Shelby American from 1965 to 1967 and by the Ford Motor Company from 1968 to 1970.
The Yenko Super Camaro was a modified Chevrolet Camaro prepared by Yenko Chevrolet, developed by the dealership owner and racer, Don Yenko.
Saleen Automotive, Inc., commonly known as Saleen (/səˈliːn/), is an American manufacturer of specialty high-performance sports cars and high-performance automotive parts. Saleen is headquartered in Corona, California, US. On June 26, 2013 Saleen became public through a reverse merger. It is listed on the OTC Bulletin Board and is controlled and majority owned by Saleen brand founder Steve Saleen.
Jack Roush is the founder, CEO, and co-owner of Roush Fenway Keselowski Racing, a NASCAR team headquartered in Concord, North Carolina, and is chairman of Roush Enterprises.
Callaway Cars Inc. is an American specialty vehicle manufacturer and engineering company that designs, develops, and manufactures high-performance product packages for cars, pickup trucks, and SUVs. They specialize in Corvettes and GM vehicles. New GM vehicles are delivered to Callaway facilities where these special packages and components are installed. Then the vehicles are delivered to GM new car dealers where they are sold to retail customers, branded as Callaway. Callaway Cars is one of four core Callaway companies, including Callaway Engineering, Callaway Carbon and Callaway Competition.
Ford and several third-party companies offered many modified versions of the highly popular Mustang in order to cater to specific portions of the marketplace outside of the mainstream. High-performance enthusiasts seek more powerful, sharper handling, sports cars, while collectors and purists seek limited production and alternate or nostalgic styling, such as is commonly found on many commemorative editions. Still, others were made purely for experimental concepts such as the McLaren M81 (turbo) and SVO, which later influenced production model design. Most variants include both performance upgrades, and unique cosmetic treatments that are typically minimal to maintain the familiar appearance of a stock Mustang. Although most of these Mustang variants were aimed at enthusiasts, an exception was the Special Service Package, which was designed specifically for law enforcement.
The Saleen S-281 is a variant introduced between the 4th and 5th generations of Ford Mustang which was produced by the American manufacturer Saleen, Inc. By 2005, Saleen departed from being a company of modifying existing Ford Mustangs as well as various other Ford automobiles, and became an Original equipment manufacturer. This was easily distinguishable with the body work designed by Phil Frank on the S-281's as well as the various other models offered by Saleen.
The fourth-generation Ford Mustang is an automobile that was produced by the American manufacturer Ford for the 1994 through 2004 model years. For 1994 the Ford Mustang underwent its first major redesign in fifteen years, being introduced in November 1993 and launching on December 9, 1993. The design, code named "SN-95" by Ford, was based on an updated version of the Fox platform, the final Ford vehicle underpinned with this platform. It featured styling by Bud Magaldi that incorporated some stylistic elements from the classic Mustangs. A convertible returned, but the previous notchback and hatchback bodystyles were discontinued in favor of a conventional coupe design.
The fifth-generation Ford Mustang (S197) is a pony car that was manufactured by Ford from 2004 until 2014, at the Flat Rock Assembly Plant in Flat Rock, Michigan. The fifth generation began with the 2005 model year, and received a facelift for the 2010 model year. Originally designed by Sid Ramnarace through late 2001 and finalized in mid-2002, the fifth-generation Mustang's design was previewed by two pre production concept cars that debuted at the 2003 North American International Auto Show. Development began on the S-197 program in 1999 under chief engineer Hau Thai-Tang, shortly after the 1998 launch of "New Edge" SN-95 facelift. From the second half of 1999, design work commenced under Ford design chief, J Mays, and concluded in July 2002 with the design freeze. There have been several variants of the fifth-generation Ford Mustang that include the Mustang GT/California Special, Shelby Mustang, Bullitt Mustang, and Boss 302 Mustang.
The Saleen 302 Series are variations introduced in the 5th generation of Ford Mustang which was produced by the American manufacturer Saleen, Inc. Beginning in 2007 with the S302-PJ edition, Saleen modified stock Ford 4.6L 3V V8 engine blocks with a larger displacement and high compression to 5.0L with OEM engine components.
Hennessey Performance Engineering is an American hypercar manufacturer and high-performance vehicle creator.
The sixth-generation Ford Mustang (S550) is the current iteration of the Mustang pony car manufactured by Ford. In departure from prior Mustang models, the sixth-generation Mustang includes fully independent rear suspension on all models, as well as an optional 2.3L EcoBoost turbocharged and direct injected four-cylinder engine. The new Mustang was introduced as a 2015 model year vehicle, marking the fiftieth anniversary of the Ford Mustang, which was revealed as a 1965 model year vehicle on April 17, 1964.
RTR Vehicles is an American automotive company founded in 2009 by Vaughn Gittin Jr. involved in designing, developing, and manufacturing OEM+ performance vehicle packages for Ford’s product line. RTR stands for “Ready to Rock!”
