Saskatchewan Accelerator Laboratory

Last updated
Saskatchewan Accelerator Laboratory
SAL logo.jpg
Established1964
Research typeParticle Accelerator
Field of research
Nuclear Physics
Director Leon Katz
Dennis Skopik
Location Saskatoon, Saskatchewan, Canada
The above-ground SAL building, seen around 1994. SAL in Winter.jpg
The above-ground SAL building, seen around 1994.

The Saskatchewan Accelerator Laboratory (SAL) was a linear accelerator facility on the University of Saskatchewan campus in Saskatoon, Saskatchewan, Canada. The facility was constructed in 1962 at a cost of $1.7M under the direction of Leon Katz. [1] SAL was identified by the OECD as a National Large-Scale Facility. [2] SAL provided support for radiology, chemistry and sub-atomic physics research.

Contents

Beginnings: 1947–1961

John Cockcroft turns the first sod for SAL. May 10, 1962. SAL sod turning.jpg
John Cockcroft turns the first sod for SAL. May 10, 1962.
Leon Katz with the LINAC, around 1964 Lean Katz at SAL.jpg
Leon Katz with the LINAC, around 1964

Around 1947 members of the Department of Physics at the University of Saskatchewan decided to obtain a 25 MeV Betatron. The principal interest was in nuclear physics, but they were also interested In the possible therapeutic uses for the treatment of cancer, [3] and they obtained support from then-Saskatchewan Premier Tommy Douglas. [4] Funding was obtained from the Atomic Energy Control Board , the National Research Council (NRC), the National Cancer Institute, local cancer societies and the University. The machine was installed in summer 1948 in a new building built in one angle of the existing Physics department, connected to the main building. It was manufactured by the Allis-Chalmers Company of Milwaukee, Wisconsin, and was very similar to the one being used at the time by Donald Kerst at the University of Illinois. [3] The first cancer patient was treated on Mar. 29, 1949 starting the really first concerted clinical investigation of the usefulness of the betatron as a radiotherapeutic tool, with over 300 patients treated in 17 years of operation. The success of the program led to the installation of the world's first cobalt-60 source for radiotherapy at the University in 1951. [4]

Linear Accelerator: 1962–1983

Layout of the SAL facility in 1994 SAL layout 94.jpg
Layout of the SAL facility in 1994

The construction of the Linear Accelerator (LINAC) was announced in September 1961, [5] and was portrayed as the next logical step on the University's research path. The 80-foot electron accelerator tube was to create energy six times that of the betatron. The cost of the $1,750,000 facility was split between NRC and the University, with the NRC meeting the cost of the equipment and the University assuming the costs of the new building required to house the machine. [6]

Construction officially began on May 10, 1962, when Sir John Cockcroft, Nobel laureate in Physics, ceremonially turned the first sod. [5] The Laboratory officially opened in early November 1964 with 75 visiting scientists from around the world in attendance, presenting papers and giving lectures over a period of several days, and hundreds of people showed up for the public open house. [6] The first experiment was performed by a group from MIT in 1965. [7]

The accelerator was designed and constructed by Varian Associates. It was a four-section 140 MeV machine operating, with the first section designed for higher current (and thus lower energy) for radiation chemistry. A 270" magnetic system at the end of the first section could divert the electron beam for such research. For radiation protection purposes the accelerator and research facilities were housed in an underground building with 10 feet of compacted gravel above it and considerably thicker shielding over the regions where the full beam intensity was diverted into the experimental areas. [8] Part of the ancillary equipment included a magnetic spectrometer mounted on a rotating platform, modified from a naval gunmount supplied by the US Office of Naval Research.

The initial experimental program included inelastic electron scattering, photodisintegration, radiation chemistry, biophysics and radiation physics. [5] During the 1970s SAL regularly published important nuclear physics results, and the LINAC was upgraded to 220 MeV in 1975, and 300 MeV in 1980. [7]

EROS: 1984–1996

Linear accelerators have an inherently low duty cycle, and one solution to this is to add a storage ring - a so-called pulse-stretcher ring (PSR). The short particle bursts from the LINAC are injected into the storage ring, and in the time between two bursts the circulating electrons are slowly extracted from it, to give a nearly continuous beam. A PSR had been proposed for SAL as far back as 1971, and much of the pioneering work on PSRs had been performed by SAL scientists. [9] In 1983 funding was obtained for a PSR for SAL, [7] and the resulting machine was dubbed the Electron Ring of Saskatchewan (EROS). [10] As an economical solution, the ring was squeezed into the existing building by the "ingenious expedient" of hanging it from the ceiling. [11] An energy compression system was also installed in the late 1980s, and by 1990, with EROS operational, SAL was once more at the forefront of medium energy nuclear physics. In 1991 the underground experimental area EA2 was enlarged to house a new electron scattering spectrometer. By 1994 SAL was operating 24/7, delivering about 5000 hours of beam for experiments per year. [7]

By the mid 1990s, the declining interest in sub-atomic science in Canada, and the need to refurbish the aging LINAC, convinced NSERC to phase out use of the LINAC. [12] In 1994 an NSERC panel had proposed that a synchrotron should be built in Canada, [13] and SAL director Dennis Skopik convinced the University to bid to host the new facility. [12]

The Canadian Light Source and the end of SAL

The SAL LINAC, seen at the CLS in 2011 SAL LINAC.jpg
The SAL LINAC, seen at the CLS in 2011

The two Universities bidding to host the new synchrotron facility - the Canadian Light Source (CLS) were Saskatchewan and the University of Western Ontario (UWO). NSERC set up a committee of international experts to recommend one of the two sites. [13] UWO, which operated the existing Canadian Synchrotron Radiation Facility at an American synchrotron, was the clear favourite. One committee member insisted there was no need to travel to Saskatoon in the dead of winter before deciding, as he had visited UWO and was convinced it should be the place. However, in 1996 the committee, which did in fact visit Saskatoon, recommended that the CLS be built in Saskatchewan. The reluctant member had been so impressed by SAL and its personnel that he changed his mind. [12]

Western Economic Diversification funding was obtained for 1996–1999 to allow SAL to "phase out its subatomic physics work and retain its staff to undertake detailed engineering design work, research Canadian supply sources and move design implementation forward on the CLS project". [14] Funding still had to be found for the new facility, and it was not until 1999, that the full funding needed was awarded. [13]

At the start of the CLS construction project in 1999, SAL formally ceased operations and all staff members were transferred into a new not-for-profit corporation, Canadian Light Source Inc., CLSI, which had primary responsibility for the technical design, construction and operation of the new facility. [15] The end-point tagger was transferred to MAX-Lab at Lund University. In 2002 the SAL LINAC was refurbished to operate at 250 MeV and now serves as part of the injection system for the CLS storage ring. [16] The current CLS building, finished in 2001, incorporates the old SAL building, with much larger addition built directly adjoining it to house the synchrotron storage ring. The former SAL underground experimental area EA2 now houses a 35MeV LINAC [17] which is part of a CLS project to produce the medical isotope technetium-99m, a mainstay of nuclear medicine. [18]

Related Research Articles

DESY German national research center

The Deutsches Elektronen-Synchrotron commonly referred to by the abbreviation DESY, is a national research center in Germany that operates particle accelerators used to investigate the structure of matter. It conducts a broad spectrum of inter-disciplinary scientific research in three main areas: particle and high energy physics; photon science; and the development, construction and operation of particle accelerators. Its name refers to its first project, an electron synchrotron. DESY is publicly financed by the Federal Republic of Germany, the States of Germany, and the German Research Foundation (DFG). DESY is a member of the Helmholtz Association and operates at sites in Hamburg and Zeuthen.

SLAC National Accelerator Laboratory Research center at Stanford University

SLAC National Accelerator Laboratory, originally named Stanford Linear Accelerator Center, is a United States Department of Energy National Laboratory operated by Stanford University under the programmatic direction of the U.S. Department of Energy Office of Science and located in Menlo Park, California. It is the site of the Stanford Linear Accelerator, a 3.2 kilometer (2-mile) linear accelerator constructed in 1966 and shut down in the 2000s, which could accelerate electrons to energies of 50 GeV.

Linear particle accelerator Type of particle accelerator

A linear particle accelerator is a type of particle accelerator that accelerates charged subatomic particles or ions to a high speed by subjecting them to a series of oscillating electric potentials along a linear beamline. The principles for such machines were proposed by Gustav Ising in 1924, while the first machine that worked was constructed by Rolf Widerøe in 1928 at the RWTH Aachen University. Linacs have many applications: they generate X-rays and high energy electrons for medicinal purposes in radiation therapy, serve as particle injectors for higher-energy accelerators, and are used directly to achieve the highest kinetic energy for light particles for particle physics.

Synchrotron Type of cyclic particle accelerator

A synchrotron is a particular type of cyclic particle accelerator, descended from the cyclotron, in which the accelerating particle beam travels around a fixed closed-loop path. The magnetic field which bends the particle beam into its closed path increases with time during the accelerating process, being synchronized to the increasing kinetic energy of the particles. The synchrotron is one of the first accelerator concepts to enable the construction of large-scale facilities, since bending, beam focusing and acceleration can be separated into different components. The most powerful modern particle accelerators use versions of the synchrotron design. The largest synchrotron-type accelerator, also the largest particle accelerator in the world, is the 27-kilometre-circumference (17 mi) Large Hadron Collider (LHC) near Geneva, Switzerland, built in 2008 by the European Organization for Nuclear Research (CERN). It can accelerate beams of protons to an energy of 6.5 teraelectronvolts (TeV).

United States Department of Energy national laboratories Laboratories owned by the United States Department of Energy

The United States Department of Energy National Laboratories and Technology Centers are a system of facilities and laboratories overseen by the United States Department of Energy (DOE) for scientific and technological research. Sixteen of the seventeen DOE national laboratories are federally funded research and development centers administered, managed, operated and staffed by private-sector organizations under management and operating (M&O) contract with DOE.

Canadian Light Source

The Canadian Light Source (CLS) is Canada's national synchrotron light source facility, located on the grounds of the University of Saskatchewan in Saskatoon, Saskatchewan, Canada. The CLS has a third-generation 2.9 GeV storage ring, and the building occupies a footprint the size of a football field. It opened in 2004 after a 30-year campaign by the Canadian scientific community to establish a synchrotron radiation facility in Canada. It has expanded both its complement of beamlines and its building in two phases since opening. As a national synchrotron facility with over 1000 individual users, it hosts scientists from all regions of Canada and around 20 other countries. Research at the CLS has ranged from viruses to superconductors to dinosaurs, and it has also been noted for its industrial science and its high school education programs.

KEK Japanese high-energy physics organization

The High Energy Accelerator Research Organization, known as KEK, is a Japanese organization whose purpose is to operate the largest particle physics laboratory in Japan, situated in Tsukuba, Ibaraki prefecture. It was established in 1997. The term "KEK" is also used to refer to the laboratory itself, which employs approximately 695 employees. KEK's main function is to provide the particle accelerators and other infrastructure needed for high-energy physics, material science, structural biology, radiation science, computing science, nuclear transmutation and so on. Numerous experiments have been constructed at KEK by the internal and international collaborations that have made use of them. Makoto Kobayashi, emeritus professor at KEK, is known globally for his work on CP-violation, and was awarded the 2008 Nobel Prize in Physics.

Stanford Synchrotron Radiation Lightsource

The Stanford Synchrotron Radiation Lightsource, a division of SLAC National Accelerator Laboratory, is operated by Stanford University for the Department of Energy. SSRL is a National User Facility which provides synchrotron radiation, a name given to electromagnetic radiation in the x-ray, ultraviolet, visible and infrared realms produced by electrons circulating in a storage ring at nearly the speed of light. The extremely bright light that is produced can be used to investigate various forms of matter ranging from objects of atomic and molecular size to man-made materials with unusual properties. The obtained information and knowledge is of great value to society, with impact in areas such as the environment, future technologies, health, biology, basic research, and education.

The Cornell Laboratory for Accelerator-based Sciences and Education (CLASSE) is a particle accelerator facility located in Wilson Laboratory on the Cornell University campus in Ithaca, NY. CLASSE formed from the merger of the Cornell High-Energy Synchrotron Source (CHESS) and the Laboratory for Elementary-Particle Physics (LEPP) in July 2006. Ritchie Patterson is the Director of CLASSE.

Proton Synchrotron CERNs first synchrotron accelerator

The Proton Synchrotron is a particle accelerator at CERN. It is CERN's first synchrotron, beginning its operation in 1959. For a brief period the PS was the world's highest energy particle accelerator. It has since served as a pre-accelerator for the Intersecting Storage Rings (ISR) and the Super Proton Synchrotron (SPS), and is currently part of the Large Hadron Collider (LHC) accelerator complex. In addition to protons, PS has accelerated alpha particles, oxygen and sulfur nuclei, electrons, positrons, and antiprotons.

ANSTO's Australian Synchrotron is a 3 GeV national synchrotron radiation facility located in Clayton, in the south-eastern suburbs of Melbourne, Victoria, which opened in 2007.

Alternating Gradient Synchrotron Particle accelerator at Brookhaven National Laboratory

The Alternating Gradient Synchrotron (AGS) is a particle accelerator located at the Brookhaven National Laboratory in Long Island, New York, United States.

Daresbury Laboratory

Daresbury Laboratory is a scientific research laboratory based at Sci-Tech Daresbury campus near Daresbury in Halton, Cheshire, England. The laboratory began operations in 1962 and was officially opened on 16 June 1967 as the Daresbury Nuclear Physics Laboratory by the then Prime Minister of United Kingdom, Harold Wilson. It is operated by the Science and Technology Facilities Council, part of UK Research and Innovation. As of 2018, it employs around 300 staff, with Professor Susan Smith appointed as director in 2012.

Synchrotron Radiation Center

The Synchrotron Radiation Center (SRC), located in Stoughton, Wisconsin and operated by the University of Wisconsin–Madison, was a national synchrotron light source research facility, operating the Aladdin storage ring. From 1968 to 1987 SRC was the home of Tantalus, the first storage ring dedicated to the production of synchrotron radiation.

MAX IV Laboratory

MAX IV is a next-generation synchrotron radiation facility in Lund, Sweden. Its design and planning has been carried out within the Swedish national laboratory, MAX-lab, which up until 2015 operated three accelerators for synchrotron radiation research: MAX I, MAX II and MAX III. MAX-lab supported about 1000 users from over 30 countries annually. The facility operated 14 beamlines with a total of 19 independent experimental stations, supporting a wide range of experimental techniques such as macromolecular crystallography, electron spectroscopy, nanolithography and production of tagged photons for photo-nuclear experiments. The facility closed on 13 December 2015 in preparation for MAX IV.

Particle accelerator Research apparatus for particle physics

A particle accelerator is a machine that uses electromagnetic fields to propel charged particles to very high speeds and energies, and to contain them in well-defined beams.

NINA was a particle accelerator located at Daresbury Laboratory, UK that was used for particle physics and synchrotron radiation.

An energy recovery linac (ERL) provides a beam of electrons used to produce x-rays by synchrotron radiation. First proposed in 1965 the idea gained interest since the early 2000s.

G. Michael Bancroft Canadian chemist (born 1942)

George "G." Michael Bancroft,, is a Canadian chemist and emeritus professor at the University of Western Ontario. One of the world's leading experts in Mössbauer spectroscopy, he is also known as one of the driving forces behind the development of synchrotron science in Canada, becoming the first director of the Canadian Light Source synchrotron after a 30-year "Odyssey".

The Canadian Synchrotron Radiation Facility (CSRF) was Canada's national synchrotron facility from 1983 to 2005. Eventually consisting of three beamlines at the Synchrotron Radiation Center at the University of Wisconsin–Madison, USA, it served the Canadian synchrotron community until the opening of the Canadian Light Source in Saskatoon, Saskatchewan, finally ceasing operations in 2008.

References

  1. ↑ Encyclopedia of Saskatchewan
  2. ↑ OECD MEGASCIENCE FORUM WORKING GROUP on REMOVING OBSTACLES to INTERNATIONAL CO-OPERATION REPORT of the SUB-GROUP on LEGISLATIVE and ADMINISTRATIVE BARRIERS to MEGASCIENCE CO-OPERATION
  3. 1 2 Harrington, E. L.; Haslam, R. N. H.; Johns, H. E.; Katz, L. (1949). "The Betatron Building and Installation at the University of Saskatchewan". Science. 110 (2855): 283–285. Bibcode:1949Sci...110..283H. doi:10.1126/science.110.2855.283. PMID   17830694.
  4. 1 2 Houston, C. Stewart; Fedoruk, Sylvia O. (1985). "Saskatchewan's role in radiotherapy research". Canadian Medical Association Journal. 132 (7): 854–864. PMC   1345880 . PMID   3884123.
  5. 1 2 3 The Saskatchewan Accelerator Laboratory University of Saskatchewan brochure, 1964
  6. 1 2 "Synchrotron predecessor, 'linear accelerator' was $1.75m addition to U of S in 1964". 5 May 2000. Retrieved 2012-08-05.
  7. 1 2 3 4 Saskatchewan Accelerator Laboratory University of Saskatchewan brochure, 1994
  8. ↑ Katz, L.; Beer, G. A.; McArthur, D. E.; Caplan, H. S. (1967). "The electron-scattering facility at the Saskatchewan Accelerator Laboratory". Canadian Journal of Physics. 45 (11): 3721–3736. Bibcode:1967CaJPh..45.3721K. doi:10.1139/p67-311.
  9. ↑ "Review of CW Electron Machines" (PDF). 1994. Retrieved 2012-08-03.
  10. ↑ "Operating results of the Electron Ring of Saskatchewan (EROS)" (PDF). 1989. Retrieved 2012-08-05.
  11. ↑ "Fission and Physics in Canada". 1989. Retrieved 2012-08-05.
  12. 1 2 3 "Synchrotron: Canadian Light Source 70 years in the making'",The Star-Phoenix 20 October 2004
  13. 1 2 3 Bancroft, G. M. (2004). "The Canadian Light Source — History and scientific prospects". Canadian Journal of Chemistry. 82: 1028–1042. doi:10.1139/v04-027.
  14. ↑ "Transitional funding approved for Saskatchewan Accelerator Laboratory". 22 December 1997. Retrieved 2012-06-08.
  15. ↑ "Industrial involvement in the construction of synchrotron lightsources" (PDF). 2004. Retrieved 2012-07-28.
  16. ↑ "Injection system for the Canadian Light Source" (PDF). 2004. Retrieved 2012-07-07.
  17. ↑ "Producing medical isotopes using X-rays" (PDF). 2012. Retrieved 2012-07-27.
  18. ↑ "Sask. Synchrotron to make medical isotopes". 24 November 2011. Retrieved 2012-07-15.

Coordinates: 52°08′12.5″N106°37′52.5″W / 52.136806°N 106.631250°W / 52.136806; -106.631250

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.