Sherwood railway station, Perth

Sherwood
Sherwood station in April 2022
General information
Location	Railway Avenue & Streich Avenue, Armadale, Western Australia Australia
Coordinates	32°08′16″S116°00′39″E / 32.137845°S 116.010754°E / -32.137845; 116.010754
Owned by	Public Transport Authority
Operated by	Transperth Train Operations
Line(s)	South Western Railway
Distance	28.6 kilometres (17.8 mi) from Perth
Platforms	2 side platforms
Tracks	2
Construction
Structure type	Ground
Accessible	Partial
Other information
Fare zone	3
History
Opened	1973
Passengers
2013–14	136,158
Services
Preceding station Transperth Following station Challis towards Perth Armadale line Armadale Terminus
Location
Location of Sherwood railway station

Sherwood railway station (officially Sherwood Station and previously known as Kingsley Station) is a suburban railway station in Armadale, a suburb of Perth, Western Australia. It is on the Armadale line which is part of the Transperth network, and is 28.6 kilometres (17.8 mi) southwest of Perth station and 1.8 kilometres (1.1 mi) north of Armadale station. The station opened in 1973 as Kingsley, but was renamed to Sherwood in 1993. It consists of two side platforms with a pedestrian level crossing. It is not fully accessible due to steep ramps, wide gaps at the pedestrian level crossing, and wide gaps between the platform and train. Services are operated by Transperth Train Operations, a division of the state government's Public Transport Authority. Peak services reach seven trains per hour in each direction, whilst off-peak services are four trains per hour.

Description

Sherwood station is along the South Western Railway, which links Perth to Bunbury. ^[1] The northern 30.4 kilometres (18.9 mi) of this railway, between Perth and Armadale, is used by Armadale line suburban rail services as part of the Transperth network. ^{[2] [3]} The line and the station are owned by the Public Transport Authority (PTA), an agency of the Government of Western Australia. ^[4] Sherwood station is located between Challis station to the north and Armadale station to the south, within the suburb of Armadale. The station is between Streich Avenue to the east and Railway Avenue to the west, ^{[5] [6]} 28.6 kilometres (17.8 mi), or a 32-minute train journey, ^{[n 1]} from Perth station, and 1.8 kilometres (1.1 mi), or a 3-minute train journey, from Armadale station. ^{[2] [3]} This places the station in Transperth fare zone three. ^{[3] [6]}

Sherwood station consists of two side platforms which are approximately 100 metres (330 ft) long, enough for a four-car train but not a six-car train. The only way to cross the tracks is at a pedestrian level crossing at the southern end of the station. There is a car park on both sides of the station, with a total of 47 bays. Sherwood station is not fully accessible due to the ramps to the platforms being too steep, the pedestrian crossing containing 75-millimetre (3.0 in) gaps, and the platform gap being as much as 130 millimetres (5.1 in). ^{[5] [6]}

History

With the 1970 Corridor Plan for Perth , new areas between Armadale and Kelmscott were opened up for development. The Armadale–Kelmscott Shire Council began lobbying the state government for new stations within the large gap between Armadale and Kelmscott stations. ^[7] Plans were completed by May 1973 for two new stations, with construction commencing soon afterwards. ^[8] Sherwood station opened later that year, as did the adjacent Challis station. Sherwood was originally named Kingsley station after the nearby Kingsley Primary School. It was renamed on 27 July 1989 to avoid confusion with Kingsley in the northern suburbs of Perth. ^{[1] [9] [10]} The name "Sherwood" comes from a nearby housing estate developed in the early 20th century. ^{[10] [11]} In 1982–83, shelters were built at the station. ^[12]

Services

Sherwood station is served by Armadale line services operated by Transperth Train Operations, a division of the PTA. ^[13] The line goes between Perth station and Armadale station. Armadale line services reach seven trains per hour during peak, dropping to four trains per hour between peaks. At night, there are two trains per hour, dropping to one train per hour in the early hours of the morning. Apart from at night and on Sundays/public holidays, most train services follow the "C" stopping pattern, which skips Burswood, Victoria Park, Carlisle, Welshpool and Queens Park stations. There are also two "B" stopping pattern services which run during the afternoon Armadale-bound. Those services are the same as the "C" pattern except they stop at Queens Park. Starting at night, trains stop at all stations. On Sundays and public holidays, half of all trains are "C" pattern trains and half are all stops trains. ^[3]

On Railway Avenue is a pair of bus stops for route 907, the rail replacement bus service. ^[5]

In the 2013–14 financial year, Sherwood station had 136,158 boardings. ^[14] The City of Armadale rezoned nearby land for higher densities in the late 2010s, with the goal of increasing patronage. ^[15]

Notes

1. 32-minute train journey on a "C" pattern service, the most common service. 36-minute train journey on an all stops service. ^[3]

References

1. Arnold, John (2006). A History of Bringing the Rails to Pinjarra : The Southwest Railway of Western Australia. p. 12. ISBN   0646142283.
2. "Manual – Rail Access" (PDF). Public Transport Authority. 30 August 2021. Archived from the original (PDF) on 21 September 2021. Retrieved 20 September 2021.
3. "Armadale/Thornlie Line Train Timetable" (PDF). Transperth. Archived (PDF) from the original on 21 March 2022. Retrieved 8 April 2022.
4. "Public Transport Authority: Railway System: April 2019" (PDF). Public Transport Authority. April 2019. Archived (PDF) from the original on 24 July 2019. Retrieved 8 April 2022.
5. "Sherwood Station – Access Map" (PDF). Transperth. Archived (PDF) from the original on 28 March 2022. Retrieved 8 April 2022.
6. "Sherwood Station". Transperth. Archived from the original on 8 April 2022. Retrieved 8 April 2022.
7. "Two Rail Stopovers". Armadale-Gosnells Comment News. 4 August 1973. p. 9.
8. "Railway stopover". Armadale-Gosnells Comment News. 5 May 1973. p. 4.
9. "Historical timeline since settlement". City of Armadale. Archived from the original on 14 April 2022. Retrieved 8 April 2022.
10. "Index of origin of road and locality names – Corrections form – 2015.pdf" (PDF). City of Armadale. p. 21, 80. Retrieved 14 May 2022.
11. Carter, Jennie; Carter, Bevan (2011). Settlement to city : a history of the Armadale district and its people. City of Armadale. pp. 134–135. ISBN   9780959494419.
12. MetroBus (1998), MetroBus Annual Report 1997–1998, p. 55
13. "Transperth". Public Transport Authority. Archived from the original on 5 October 2021. Retrieved 8 April 2022.
14. "Question On Notice No. 4248 asked in the Legislative Assembly on 25 June 2015 by Mr M. Mcgowan". Parliament of Western Australia. Archived from the original on 19 April 2022. Retrieved 8 April 2022.
15. "Town Planning Scheme No. 4: Residential Density Code Modifications East of Challis and Sherwood Train Stations: Amendment No. 89" (PDF). City of Armadale. Archived (PDF) from the original on 19 April 2022. Retrieved 8 April 2022.

External links

Media related to Sherwood railway station, Perth at Wikimedia Commons