Transperth | |
---|---|
Overview | |
Owner | Public Transport Authority |
Area served | Perth and surrounding areas |
Transit type | Bus, ferry, rail |
Number of lines | 8 (train) [a] 1 (ferry) |
Number of stations | 94 (train) [b] 54 (bus) [c] |
Annual ridership | 123,307,689 (year to June 2023) |
Headquarters | Public Transport Centre |
Website | Transperth |
Operation | |
Operator(s) | Captain Cook Cruises Path Transit Swan Transit Transdev WA Transperth Train Operations WAGR (former) MTT (former) |
Number of vehicles | Over 1499 buses 354 railcars 3 ferries |
Technical | |
Track gauge | 1,067 mm (3 ft 6 in) narrow gauge |
Electrification | 25 kV 50 Hz AC from overhead catenary |
Transperth is the public transport system for Perth and surrounding areas in Western Australia. It is managed by the Public Transport Authority (PTA), a state government organisation, and consists of train, bus and ferry services. Bus operations are contracted out to Swan Transit, Path Transit and Transdev. Ferry operations are contracted out to Captain Cook Cruises. Train operations are done by the PTA through their Transperth Train Operations division.
The Transperth train system consists of eight lines: the Airport, Armadale, Ellenbrook, Fremantle, Mandurah, Midland, Thornlie, and Yanchep lines; and 94 stations. Train services have operated since 1881. The Transperth bus system has over 1,499 buses and 51 bus stations, 38 of which are interchanges at railway stations. Buses have operated under private operators from 1903; these private operators were bought out by the Metropolitan Transport Trust starting in 1958. Contracting out the bus operations began in the mid-1990s. The Transperth ferry system has one route, two stops, and three ferries. The system extends as far north as Two Rocks on the outer north of the Perth metropolitan area, Wundowie in the Shire of Northam, and Dawesville in the south of Mandurah. Fares are paid using the SmartRider system or using cash. With 123,307,689 boardings in the year to June 2023, Transperth has the fourth highest patronage in Australia, although the train system has Australia's third highest train patronage.
The first railway in Perth was the Eastern Railway from Fremantle to Guildford via Perth, which opened on 1 March 1881. Western Australian Government Railways (WAGR) was formed in 1890 as the operator of railways in Perth and Western Australia. The South Western Railway opened on 2 May 1893. On 28 September 1899, the first trams in Perth begin operating. [1]
In 1903, the first private bus operator began, operating routes from Victoria Park to the Perth central business district (CBD). Trams in Fremantle begin operating in 1905 and were abolished in 1952. The first diesel railcars, the WAGR ADG class, enter service on 28 November 1954, replacing steam locomotives. This allowed for shorter stop spacings, leading to the opening of seven new railway stations on that date. [1]
On 15 January 1958, the Metropolitan Transport Trust (MTT) was formed, and begun to acquire the various private bus operators in Perth. The MTT also operated Perth's ferry services. Perth's last tram ran in 1958 as well. By 5 October 1968, suburban rail services were fully operated by diesel railcars. In the late-1960s, the Midland line was converted from narrow gauge to dual gauge, allowing standard gauge trains to travel from the eastern states to East Perth railway station. The gauge conversion necessitated the rebuild of several stations and bridges along the Midland line. In 1969, the last trolleybuses in Perth ran. The management of Perth's public transport was integrated into a single body in 1974 when the MTT took over the management of Perth's suburban rail services from WAGR. The MTT contracted out the operations of the suburban rail services back to WAGR. [1] Throughout the 1970s, bus stations opened across the Perth metropolitan region, starting with Morley bus station (now Galleria bus station) in August 1972 and Wellington Street bus station in March 1973. [2]
The Fremantle line was closed to passenger services on 1 September 1979, despite a 100,000 signature petition calling for the closure to be cancelled. Following a change in government at the 1983 state election, the Fremantle line was reopened. The government then decided to electrify the existing suburban rail lines and build the Yanchep line (known at the time as the Joondalup line). On 31 August 1986, the MTT adopted Transperth as its trading name, marking the first time that the name Transperth has been used for Perth's public transport system. Construction for the Joondalup line commenced on 14 November 1989. The electrification of the rail network was completed by September 1991 and the Transperth A-series trains entered service, replacing the diesel railcars. The Joondalup line partially opened on 21 December 1992 and fully opened in March 1993. [1] [2] [3] Later that year, the Joondalup line was extended to Currambine railway station. [4] [5]
The operation of Transperth services underwent a reorganisation in the mid-1990s, with bus and ferry operations contracted out to private operators. Responsibility for managing the system was transferred to the Department of Transport. The Transperth brand was also transferred to the Department of Transport, with the brand to be used by all the companies which were to operate services under contract. The MTT adopted the trading name MetroBus on 14 February 1995. The operation of the ferries was transferred to Captain Cook Cruises in February 1995. It was initially planned that MetroBus would compete with the private sector for contracts, and it was successful in bidding for the Joondalup North, Armadale South and Perth CATs contracts in 1995 and 1996 whilst several other contracts were awarded to the private sector. The government later announced that it would withdraw MetroBus from operating and it would tender out the remaining contract areas. MetroBus ceased operating bus services on 4 July 1998. [2] [3]
In December 1999, enabling legislation for the Mandurah line was passed, paving the way for the construction of the line. It was initially planned to branch off the Armadale line, but was later rerouted to go via a direct route south of Perth in the median of the Kwinana Freeway, necessitating tunnelling under the Perth CBD. This led to the development of the Thornlie line as a branch off the Armadale line instead. On 1 July 2003, the Public Transport Authority was formed, taking over from the Department of Transport of the ownership and management of Transperth services. An extension of the Joondalup line to Clarkson station opened on 4 October 2004. The first Transperth B-series trains enter service in 2004 as well and Nowergup railcar depot opens. Thornlie station opened on 7 August 2005, and on 23 December 2007, the Mandurah line opened. [1] [3]
On 21 September 2014, an extension of the Joondalup line to Butler station opened. In July 2016, the Perth Busport opened, replacing Wellington Street bus station. The busport is underground and has a dynamic bus stand allocation system to increase capacity for the same number of bus stands. On 3 November 2016, construction begins on the Forrestfield–Airport Link, later to become known as the Airport line. In 2018 and 2019, the government passed legislation to construct an extension of the Joondalup line to Yanchep, the Ellenbrook line as a spur off the Midland line, and an extension of the Thornlie line to Cockburn Central station along the Mandurah line, completing the original plans for the Mandurah line to spur off the Armadale line. These projects are all part of the Metronet project to improve Perth's public transport system, which involves several station rebuilds and improvements as well. The Airport line opened on 9 October 2022 and the Yanchep extension opened on 14 July 2024, coinciding with the renaming of the Joondalup line to the Yanchep line. In January 2023, testing for the Transperth C-series train commenced. [1] These trains entered service on 8 April 2024. [6] [7]
Transperth services run as far as Two Rocks on the outer north of the Perth metropolitan area, Wundowie in the Shire of Northam, and Dawesville in the south of Mandurah. [8]
The Transperth train system consists of eight lines: the Airport, Armadale, Ellenbrook, Fremantle, Mandurah, Midland, Thornlie, and Yanchep lines. These lines all meet at Perth station and Perth Underground (used by the Yanchep and Mandurah lines) in the city's CBD, radiating out from there. The Ellenbrook line has been recently built and was opened in late 2024. There are several other extensions and upgrades under construction as well under the Metronet project. The system has 85 stations along these eight lines, [b] . [9] Transperth is Australia's third busiest passenger rail system, behind Sydney and Melbourne but ahead of Brisbane and Adelaide. [10] There are three trains used: the Transperth A-series train, Transperth B-series train and the Transperth C-series train which entered service on 8 April 2024. [6] [7]
The Transperth bus system consists of 37 bus-train interchanges and 14 bus-only stations. [9] The bus system is contracted out to private operators: Swan Transit, Path Transit and Transdev. [11] The bus system is the fourth-busiest in Australia, behind Sydney, Melbourne and Brisbane. [10]
The Transperth ferry system consists of one route and three ferries. The line across the Swan River from Elizabeth Quay Jetty in the Perth CBD to Mends Street Jetty in South Perth. The ferries are the MV Shelley Taylor-Smith, the MV Phillip Pendal and the MV Tricia.
The fare structure and ticketing system is the same for the bus, train and ferry network. The system is split into nine concentric zones, radiating out from the centre of Perth. [12] : 26 [9] Zone one extends 8 kilometres (5.0 mi) from the centre of Perth, zones two and three consist of bands 9 kilometres (5.6 mi) wide, and the remaining zones consist of bands 10 kilometres (6.2 mi) wide. Travelling within one zone costs a one-zone fare. Travelling within multiple zones costs a two-zone fare. Multiple trips, including transfers between modes and services, are possible under the same fare as long as this is done within two hours for journeys four zones or less or three hours for journeys of five zones or more. [12] : 26 [13] Prior to January 2022, higher fares were applied to travellers using more than two zones, up to a nine zone fare for travelling though all nine zones. The two-zone fare cap was instituted by the McGowan government as an election promise prior to the 2021 state election. [14] [15] Since February 2024, Students travelling with a smart rider have been able to travel for free monday-friday. Travel has also been Free for everyone with a SmartRider each Sunday. [16]
There are other ticket types. The "two-section" fare is less than a one-zone fare and is for one-way trips below 3.2 kilometres (2 mi). Primary and secondary school students with a Student SmartRider can travel for free on weekdays during the school year, and with a concession fare other days. [17] The DayRider ticket allows unlimited travel for one day. The FamilyRider ticket allows unlimited travel for up to seven people for one day under certain conditions and at certain times. [18]
79% of all fares were paid for using a SmartRider card, [12] : 27 a contactless stored-value card introduced in 2007. Paying for paper tickets using cash is also possible. Tickets can be issued on all buses and ferries and from ticket machines at train stations and ferry jetties. [12] : 26 SmartRiders can only be purchased at certain retail stores and Transperth InfoCentres, and are not generally purchasable at stations or on buses. Methods for adding money to the SmartRider card include using "add-value machines" at certain stations, BPAY, on buses and ferries, at certain retail stores and Transperth InfoCentres, and by setting up "Autoload", where direct debits are made automatically from a bank account to a SmartRider. Fares for using a SmartRider cost 10% less than paper tickets, and 20% less if "Autoload" is used. [12] : 27 To use a SmartRider card, users must "tag on" at the start of a journey and "tag off" at the end of their journey, and the lowest possible fare is automatically applied. The daily spend on a SmartRider is capped at the DayRider cash fare.
People travelling to and from events at Perth Stadium do not have to use a SmartRider or pay for a ticket as Transperth fares are included in the cost of every Perth Stadium ticket. [19]
From the 1990s to 2007, MultiRiders were used as multi-trip tickets. They used magnetic-stripe technology. [20]
Perth has a Free Transit Zone (FTZ) with zero-fare travel on buses and trains in its central business district.
On the rail network, however, free travel within the zone is only available to passengers who have a SmartRider card, and tag on and off. This was not always the case, but is now required due to changes in station structures brought about by the implementation of the SmartRider ticketing system. [21] For train passengers, the zone is bounded by City West, Elizabeth Quay, and Claisebrook stations. [22]
The FTZ is funded by an annual levy (Perth Parking Levy) on non-residential parking bays in Perth, East Perth, West Perth and Northbridge. [23] The levy was introduced under the Perth Parking Management Act 1999, and allows levy funds to be used for transport-related investments aimed at reducing private car travel into and out of Perth CBD, including the FTZ and CAT bus services. [24]
Since its introduction, the levy has been criticised by the City of Perth council, business groups and the media. [25] [26] [27]
Ticket Type | Standard | Concession |
---|---|---|
2 Section | $2.40 | $1.10 |
1 Zone | $3.50 | $1.60 |
2 Zone | $5.20 | $2.40 |
DayRider | $10.40 | $4.80 |
FamilyRider | $10.40 | N/A |
Paid car parking at railway stations was introduced on 1 July 2014. The cost is $2 per weekday, free on weekends. SmartRiders or cash can be used to pay for parking. [29] [30]
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Source: Bureau of Infrastructure & Transport Research Economics [31] PTA [32] |
Mode | Patronage | |||||||
---|---|---|---|---|---|---|---|---|
2006–07 | 2011–12 | 2016–17 | 2021–22 | |||||
Bus | 64,622,615 | 64.0% | 80,626,481 | 55.9% | 80,016,728 | 56.8% | 58,890,882 | 57.6% |
Train | 35,757,833 | 35.4% | 63,029,878 | 43.7% | 60,092,097 | 42.7% | 42,779,726 | 41.9% |
Ferry | 545,357 | 0.5% | 473,728 | 0.3% | 747,881 | 0.5% | 532,382 | 0.5% |
Total | 100,925,805 | 100% | 144,130,087 | 100% | 140,856,706 | 100% | 102,202,990 | 100% |
Line | Patronage | |||||
---|---|---|---|---|---|---|
2011–12 | 2016–17 | 2021–22 | ||||
Mandurah | 20,293,223 | 32.2% | 20,343,828 | 33.9% | 14,357,888 | 33.6% |
Yanchep [d] | 16,700,234 | 26.5% | 16,658,559 | 27.7% | 11,752,572 | 27.5% |
Armadale and Thornlie | 9,227,813 | 14.6% | 7,385,888 | 12.3% | 5,629,910 | 13.2% |
Fremantle | 8,679,139 | 13.8% | 7,940,853 | 13.2% | 5,217,162 | 12.2% |
Midland | 6,626,464 | 10.5% | 6,143,986 | 10.2% | 4,243,760 | 9.9% |
Replacement buses | 1,503,005 | 2.4% | 1,618,983 | 2.7% | 1,578,434 | 3.7% |
Total | 63,029,878 | 100% | 60,092,097 | 100% | 42,779,726 | 100% |
The Armadale line is a partially-closed suburban railway service in Perth, Western Australia, operated by the Public Transport Authority as part of the Transperth system. The Armadale line is 30.4 kilometres (18.9 mi) long, and starts at Perth station, heading south-east of there to serve Perth's south-eastern suburbs, terminating at Armadale station. Since November 2023, the line has been closed from Victoria Park station to Armadale for the Victoria Park-Canning Level Crossing Removal Project and Byford extension.
The Yanchep line is a suburban railway line and service in Perth, Western Australia, linking the city's central business district (CBD) with its northern suburbs. Operated by the Public Transport Authority as part of the Transperth system, the Yanchep line is 54.5 kilometres (33.9 mi) long and has sixteen stations. It commences in a tunnel under the Perth CBD as a through service with the Mandurah line. North from there, the line enters the median strip of the Mitchell Freeway, where nine of the line's stations are. The Yanchep line diverges from the freeway to serve the centre of Joondalup and permanently leaves the freeway north of Butler for the northernmost four stations to Yanchep.
Perth railway station is the largest station on the Transperth network, serving the central business district of Perth, Western Australia. It serves as an interchange between the Airport, Armadale, Ellenbrook, Fremantle, Midland, and Thornlie lines as well as Transwa's Australind service. It is also directly connected to Perth Underground railway station, which has the Yanchep and Mandurah lines.
Clarkson railway station is a suburban rail station in Clarkson, a suburb of Perth, Western Australia. It is on the Yanchep line, which is part of the Transperth network. Located in the median of the Mitchell Freeway, the station consists of an island platform connected to the west by a pedestrian footbridge. A six-stand bus interchange and two carparks are located near the entrance.
SmartRider is the contactless electronic ticketing system of the Public Transport Authority of Western Australia. The system uses RFID smartcard technology to process public transport fares across public bus, train, and ferry services.
Oats Street railway station is a temporarily-closed Transperth suburban railway station in Western Australia, located in the Perth suburbs of Carlisle and East Victoria Park. The station was served by the Armadale and Thornlie lines prior to its closure in November 2023.
Thornlie railway station is a temporarily closed railway station on the Transperth network. It was the terminus of the Thornlie line, a spur of the Armadale Line, seventeen kilometres (11 mi) from Perth Station serving the suburb of Thornlie, Western Australia. Under construction is the Thornlie-Cockburn Link which will link to Cockburn Central railway station along the Mandurah line via two new stations, Nicholson Road railway station and Ranford Road railway station.
The Mandurah line is a commuter railway and service on the Transperth network in Western Australia that runs from Perth south to the state's second largest city Mandurah. The service is operated by Transperth Train Operations, a division of the Public Transport Authority. The line is 70.1 kilometres (43.6 mi) long and has 12 stations. At its northern end, the line begins as a continuation of the Yanchep line at Perth Underground, and ends as a continuation of the Yanchep line at Elizabeth Quay. The first 1.3 kilometres (0.81 mi) of the line is underground, passing under the Perth central business district. The line surfaces and enters the median of the Kwinana Freeway just north of the Swan River. It continues south down the freeway's median for 30 kilometres (19 mi), before veering south-west towards Rockingham. The final stretch of the line goes south from Rockingham to Mandurah.
Whitfords railway station is a railway station located on the boundary of Padbury and Kingsley, suburbs of Perth, Western Australia. It is on the Yanchep line, which is part of the Transperth commuter rail network. It is located in the median of the Mitchell Freeway, and consists of an elevated bus interchange on top of an island platform at ground level. South of Whitfords, trains run every 5 minutes during peak. North of Whitfords, trains run every 10 minutes during peak. Between peak during the day, trains run every 15 minutes. The journey to Perth Underground railway station is 19.8 kilometres (12.3 mi), and takes 19 minutes.
Currambine railway station is a suburban rail station on the border of Currambine and Joondalup, north of Perth, Western Australia. It is on the Yanchep line, which is part of the Transperth network. Located in the median of the Mitchell Freeway, the station consists of an island platform connected to the east and west by an underpass.
The B-series trains are a class of electric multiple unit built by Downer Rail in Maryborough, Queensland for Transperth between 2004 and 2019.
Railways in Perth, the capital city of Western Australia, have existed since 1881, when the Eastern Railway was opened between Fremantle and Guildford. Today, Perth has eight Transperth suburban rail lines and 94 stations.
The Metropolitan (Perth) Passenger Transport Trust was a statutory authority of the Government of Western Australia from 1958 to 2003. From 1958 to the mid-1990s, it operated bus and ferry services within the Perth metropolitan area. From 1974 to 1993, it managed suburban rail services within the Perth metropolitan area as well, contracting the operation of those services to Westrail.
Perth Stadium railway station is a railway station in Burswood, Western Australia, next to Perth Stadium. It is located on the Armadale Line With six platforms, the station is the second largest on the Transperth network, after Perth railway station.
Alkimos railway station is a suburban rail station on the Yanchep line in Alkimos, Western Australia. The station opened on 14 July 2024 as part of the Yanchep Rail Extension.
Eglinton railway station is a suburban rail station on the Yanchep line in Eglinton, Western Australia. The station opened on 14 July 2024 as part of the Yanchep Rail Extension.
Yanchep railway station is a suburban rail station in Yanchep, a suburb of Perth, Western Australia. The station has been the northern terminus of Transperth's Yanchep line since it opened on 14 July 2024.
Metronet is a multi-government agency in Western Australia. It is responsible for managing extensions to Perth's rail network. It was formed to deliver commitments made by the McGowan Government during the 2017 election campaign.
Buses in Perth, the capital city of Western Australia, are run under the Transperth brand. The system is owned and managed by the Public Transport Authority and operations are contracted out to private operators: Swan Transit, Path Transit and Transdev.