Butler | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
General information | |||||||||||||||||||||
Location | Butler Boulevard, Exmouth Drive Butler, Western Australia Australia | ||||||||||||||||||||
Coordinates | 31°38′08″S115°42′01″E / 31.635547°S 115.700269°E | ||||||||||||||||||||
Owned by | Public Transport Authority | ||||||||||||||||||||
Operated by | Public Transport Authority | ||||||||||||||||||||
Line(s) | Joondalup line | ||||||||||||||||||||
Distance | 40.7 km (25.3 mi) from Perth Underground | ||||||||||||||||||||
Platforms | 2 side platforms | ||||||||||||||||||||
Tracks | 2 | ||||||||||||||||||||
Bus routes | 6 | ||||||||||||||||||||
Bus stands | 6 | ||||||||||||||||||||
Bus operators | Swan Transit | ||||||||||||||||||||
Construction | |||||||||||||||||||||
Parking | 891 spaces | ||||||||||||||||||||
Accessible | Yes | ||||||||||||||||||||
Other information | |||||||||||||||||||||
Fare zone | 5 | ||||||||||||||||||||
History | |||||||||||||||||||||
Opened | 21 September 2014 | ||||||||||||||||||||
Passengers | |||||||||||||||||||||
March 2018 | 2,750 per weekday | ||||||||||||||||||||
Services | |||||||||||||||||||||
| |||||||||||||||||||||
Location | |||||||||||||||||||||
Location of Butler station |
Butler railway station is a suburban railway station in Butler, a suburb of Perth, Western Australia. It is the terminus of the Joondalup line, which is on the Transperth rail network. Planning for the Joondalup line in the Butler area began in the late 1990s. The station was built as part of a A$240 million extension of the Joondalup line from Clarkson to Butler. Construction began on the station on 16 July 2012, and was completed on 16 May 2014, opening on 21 September 2014. On 15 July 2024, an extension of the Joondalup line from Butler to Yanchep will open.
Butler station has two side platforms situated in a cutting below the surrounding ground level. It is accessed from a ground-level concourse. Services run every 10 minutes during peak and every 15 minutes between peak. The journey to Perth Underground station is 40.7 kilometres (25.3 mi) and takes 38 minutes. The station is served by six regular bus routes, operated by Swan Transit under contract. To the south, these bus routes link to Clarkson station, traversing through several suburbs along the way. To the north, these bus routes go as far as Two Rocks, on the northern edge of the Perth metropolitan region.
Butler station is in Butler, a suburb of Perth, Western Australia. It is located east of Exmouth Drive and north of Butler Boulevard. [1] It is 40.7 kilometres (25.3 mi), [2] or a 38 minute train journey, from Perth Underground station along the Joondalup line, placing the station in fare zone five. The next station to the south is Clarkson station. [3]
The station consists of two side platforms situated in a cutting below ground level. The platforms are approximately 150 metres (490 ft) long, or long enough for a Transperth 6-car train. At ground level is a concourse which can be used to cross over the railway or access the station. Operating hours are from approximately 5 am to 1 am, extending to 2 am on Friday and Saturday nights. [3] Outside station operating hours, the concourse is locked. [4] : 19 Each platform is served by an escalator, a lift, and a set of stairs, making it fully accessible. On the concourse are toilets, a kiosk, a customer service office and fare gates. [1] It has 891 car parking bays. [5] The station, designed by Coniglio Ainsworth Architects, [6] [7] received a commendation at the 2015 WA Architecture Awards. [8] [9]
Running along the 38-metre (125 ft) long station concourse wall is a piece of public art titled Rain on Water, by Geoffrey Drake-Brockman. The artwork consists of 1,200 aluminium rods with various lengths. Each rod has a brightly coloured end, with the colour depending on the height of the aluminium rod; shorter rods being on the blue end of the spectrum, and longer rods being on the red end of the spectrum. The artwork represents the ripples from raindrops falling on water, with mathematical modelling used to determine the height of each rod to make the piece of art look like a realistic wave. [10] [11]
The original stage of the Joondalup line began construction in November 1989. [12] It was opened between Perth station and Joondalup station on 20 December 1992, [13] and extended to Currambine station on 8 August 1993. [14] An extension to Clarkson station opened on 4 October 2004. [15]
During planning for the Joondalup line extension from Currambine station to Clarkson station in the late 1990s and early 2000s, it was recognised that the Joondalup line would be eventually extended north of Clarkson. Two potential stations were recognised: a park-and-ride station at Lukin Drive, called Butler station; and a station north of that, surrounded by a transit oriented development, called Brighton station. The name "Brighton" is a commonly used, but unofficial name for part of Butler. [16] A$2.1 million was allocated in the 2007 state budget for planning the extension to Butler. [17]
Before the 2008 Western Australian state election, both the Labor and Liberal parties promised to extend the Joondalup line to Butler. After the Liberal Party formed government following the election, Transport Minister Simon O'Brien said in 2009 that it was hoped that construction would start in 2011–12, and the extension would open in 2014. At the time, the number of stations on the extension was not decided. [18]
In November 2009, the government introduced the Railway (Butler to Brighton) Bill into Parliament. [19] The railway extension had a predicted cost of $240 million, a length of 7.5 kilometres (4.7 mi), and one station at the end of the extension, known then as Brighton station. The opposition criticised the plan to not build the station at Lukin Drive. O'Brien defended the choice of building only one station, saying that the Public Transport Authority told him it was a better idea to do so. [20] The plan called for Brighton station to be a park and ride station, as the previously planned station at Lukin Drive was not going to be built. [4] : 16 At this time, preliminary earthworks had begun. [20] [21] The bill passed in July 2010. [22] [23]
The first of the main contracts for the project was awarded to R J Vincent & Co in December 2010. The contract was worth $6 million, and was for 4 kilometres (2.5 mi) of earthworks between the entrance of the Nowergup depot near Hester Avenue, and Landbeach Boulevard, joining up with the earthworks done previously north of Landbeach Boulevard. [24] [25] The earthworks for double tracks had already been completed during the construction of a single track between Clarkson station and Nowergup depot. [16] The next major contract was awarded on 20 May 2011 [12] to a joint venture between Bocol Constructions and R J Vincent & Co. The $9.8 million contract was for the construction of bridges across the railway corridor and associated roadworks. The bridges were at Butler Boulevard, Landbeach Boulevard and Benendin Avenue. The contract also included the construction of 1.8 kilometres (1.1 mi) of Principal Shared Path. [26] [27] Bocal constructed the bridges and concrete walls; R J Vincent did the road construction, earthworks, traffic management, and everything else not under Bocal's scope. [27] The station design was approved by a Joint Development Assessment Panel on 5 December 2011. [4] [28] A $22 million contract for the construction of Butler station was awarded to Cooper and Oxley in July 2012, [6] [7] and construction on the station began on 16 July 2012. [12]
By October 2012, earthworks and the construction of the three bridges were complete. That month, construction on the railway tracks and overhead power lines began, after the $24 million contract for that was awarded to John Holland. 13 kilometres (8.1 mi) of track was laid between Clarkson station and Butler station, and 5.4 kilometres (3.4 mi) of track in the Nowergup depot. The single track between Clarkson station and Nowergup depot was duplicated, and a double track was constructed between Nowergup depot and Butler station. [29] In November 2012, a $19.7 million contract was signed with Ansaldo STS Australia to design and construct the railway signalling system for the extension. [30] [31] Included in the funding for the project were four new Transperth B-series trains and 11 new buses. [32] [33] The construction of the station was completed on 16 May 2014. [12] Over the following months, works on the tracks, signalling and overhead electrical systems continued. [33]
The first train ran on the extension on 25 August 2014, [12] with train driver familiarisation beginning after that. [34] The station was opened on 21 September 2014 by Premier Colin Barnett and Minister for Transport Dean Nalder, several months early and $20 million under budget. [35] [36] [37] [38]
Some nearby residents experienced excessive vibrations when trains passed their homes. 178 people signed a petition saying that they and their homes were "severely and adversely impacted" by vibrations from trains. [39] [40] 850 metres (2,790 ft) of acoustic matting was used for the extension, but it was not used for the tracks closest to Butler station, where the complaints were coming from. Nalder said that computer modelling was used to determine where to place the acoustic matting, based on ground conditions, geography and track geometry. He also said that the PTA would monitor noise and vibrations over the coming months. [40] On 12 October 2014, 50 residents gathered around the railway line to protest against the vibrations. Opposition leader Mark McGowan, Member for Butler John Quigley and Shadow Transport Minister Ken Travers attended the protest as well. McGowan said that the 850 metres (2,790 ft) of matting was not enough. Nalder reiterated that the government was undertaking vibration monitoring. [41] [42] In December 2014, the results of noise monitoring were released. The monitoring found that noise and vibration levels near Butler station were within acceptable standards, but noise and vibrations were above acceptable levels at Kilkee Street, near Nowergup depot. The PTA said that a larger earth noise wall would be built there. [43]
Before opening, the projected patronage for the station was 2,000 people per day. [32] [44] The station reached that patronage nine days after opening. In August 2015, the station had 2,022 daily boardings, with a total of 600,000 in its first year of operation. Boardings on buses in the surrounding area were also up by 13% compared to before the station opened. [45] [46] [47] In March 2018, Butler station had approximately 2,750 boardings on an average weekday, making it the seventh busiest station on the Joondalup line. [48]
In late 2019, construction started on extending the Joondalup line north 14.5 kilometres (9.0 mi) to Yanchep, with three new stations. The next station from Butler will be Alkimos station, and as part of the Yanchep extension, the platforms at Butler station will be lengthened. [49] [50] The extension to Yanchep is planned to open on 15 July 2024. [51] [52]
Butler station is served by the Joondalup line on the Transperth network. [3] Services are operated by the Public Transport Authority. [53] The line goes between Butler and Elizabeth Quay station in the Perth central business district, continuing south from there as the Mandurah line. As the station is a terminus, both platforms are used for services towards Elizabeth Quay. Joondalup line trains depart the station every 10 minutes during peak on weekdays, and every 15 minutes outside peak, and on weekends and public holidays. Christmas Day has a different timetable to other public holidays. At night time, trains are half-hourly or hourly. [3]
Butler station has a bus interchange with six bus stands. [1] Bus services are operated by Swan Transit under contract. [54] [55] Six regular bus routes serve the station. Routes 480, 482, 483 and 484 link to Clarkson station, passing through suburbs including Clarkson, Jindalee, Merriwa, Mindarie, Quinns Rocks and Ridgewood. Routes 483 and 484 also go just north of the station to Alkimos. Routes 490 and 491 go north of the station, passing through Alkimos and Eglinton to get to Yanchep and Two Rocks, [56] [57] which is the northernmost suburb of the Perth metropolitan region. [58] Route 491 was introduced alongside the new station; the other routes already existed, but were rerouted when the station opened. [59] Rail replacement bus services operate as route 904. [1]
The Joondalup line is a commuter rail service in Western Australia, linking the Perth central business district (CBD) with the metropolitan area's north-western suburbs. The service is operated on the Northern Suburbs Railway by Transperth Train Operations, a division of the Public Transport Authority, and is part of the Transperth network. It is 40.7 kilometres (25.3 mi) long and serves 13 stations. The service is currently being extended to Yanchep.
Stirling railway station is a railway station on the Transperth network. It is located on the Joondalup line, nine kilometres from Perth station serving the suburb of Stirling.
Clarkson railway station is a commuter rail station in Clarkson, a suburb of Perth, Western Australia. It is on the Joondalup line, which is part of the Transperth network. Located in the median of the Mitchell Freeway, the station consists of an island platform connected to the west by a pedestrian footbridge. A six stand bus interchange and two carparks are located near the entrance.
Greenwood railway station is a park and ride suburban railway station in Perth, Western Australia, within the suburbs of Duncraig and Greenwood. The station is on the Joondalup line and is part of the Transperth network. Located within the median strip of the Mitchell Freeway at an interchange with Hepburn Avenue, Greenwood station consists of two side platforms connected to a car park east of the freeway by a footbridge.
Warwick railway station is a railway station on the Transperth network. It is located on the Joondalup line, 13 kilometres (8.1 mi) from Perth station serving the suburb of Warwick.
Whitfords railway station is a railway station located on the boundary of Padbury and Kingsley, suburbs of Perth, Western Australia. It is on the Joondalup railway line, which is part of the Transperth commuter rail network. It is located in the median of the Mitchell Freeway, and consists of an elevated bus interchange on top of an island platform at ground level. South of Whitfords, trains run every 5 minutes during peak. North of Whitfords, trains run every 10 minutes during peak. Between peak during the day, trains run every 15 minutes. The journey to Perth railway station is 19.8 kilometres (12.3 mi), and takes 19 minutes.
Glendalough railway station is a railway station on the Transperth network in Perth, Western Australia. It is located on the Joondalup line, five kilometres from Perth station serving the suburb of Glendalough.
Leederville railway station is a railway station on the Transperth network in Western Australia. It is located on the Joondalup line, 3.2 kilometres (2.0 mi) from Perth station serving the suburb of Leederville.
Edgewater railway station is a railway station on the Transperth network. It is located on the Joondalup line, 23 kilometres from Perth station serving the suburb of Edgewater.
Joondalup railway station is a railway station on the Transperth network. It is located on the Joondalup line, 26 kilometres from Perth station serving the regional metropolitan city of Joondalup.
Currambine railway station is a commuter rail station on the border of Currambine and Joondalup, north of Perth, Western Australia. It is on the Joondalup line, which is part of the Transperth network. Located in the median of the Mitchell Freeway, the station consists of an island platform connected to the east and west by an underpass.
Nowergup railway depot is a Transperth depot in the suburb of Nowergup, Western Australia. It is situated in the median of the Mitchell Freeway between the Lukin Drive and Hester Avenue interchanges.
The B-series trains are a class of electric multiple unit built by Downer Rail in Maryborough, Queensland for Transperth between 2004 and 2019.
The Northern Suburbs Transit System is the name given to the project initiated and funded by the Government of Western Australia to provide high-speed passenger rail services to the northern corridor of metropolitan Perth, the capital city of Western Australia. The project was commenced by the Dowding Labor government in the late 1980s, and its main feature project was the Joondalup railway line and linked bus services, which have been a core component of the Transperth transport network since the line's opening to passengers on 21 March 1993.
Railways in Perth, the capital city of Western Australia, have existed since 1881, when the Eastern Railway was opened between Fremantle and Guildford. Today, Perth has seven Transperth commuter rail lines and 75 stations.
Transperth is the public transport system for Perth and surrounding areas in Western Australia. It is managed by the Public Transport Authority (PTA), a state government organisation, and consists of train, bus and ferry services. Bus operations are contracted out to Swan Transit, Path Transit and Transdev. Ferry operations are contracted out to Captain Cook Cruises. Train operations are done by the PTA through their Transperth Train Operations division.
Alkimos railway station is an under-construction suburban rail station in Alkimos, Western Australia. The station is being constructed as part of the Yanchep Rail Extension of Transperth's Joondalup line, and is planned to open on 15 July 2024.
Eglinton railway station is an under-construction suburban rail station in Eglinton, Western Australia. The station is being constructed as part of the Yanchep Rail Extension of Transperth's Joondalup line, and is planned to open on 15 July 2024.
Yanchep railway station is an under-construction suburban rail station in Yanchep, a suburb of Perth, Western Australia. The station is being constructed as part of the Yanchep Rail Extension of Transperth's Joondalup line, and is planned to open on 15 July 2024.