Shipbuilding in the early modern era

Last updated
A replica of Nao named Victoria, one of the ships that participated in Ferdinand Magellan's voyage to circumnavigate the globe in 1519 NaoVictoria.JPG
A replica of Nao named Victoria, one of the ships that participated in Ferdinand Magellan's voyage to circumnavigate the globe in 1519

Maritime travel experienced a large leap in the capabilities of seafaring vessels thanks to technological improvements in shipbuilding in the early modern era. Europe, Asia, and the Middle East all saw improvements on prior construction techniques, contributing to the Age of Discovery. As a result, the introduction of these technologies in the production of naval vessels was critical as they allowed nations that utilized these advancements to ascend to a state that could expand its influence at a far greater range. In military engagements, the exploration of new lands and potential colonies, or the transportation of goods for trade, better shipbuilding techniques coincided with prosperity. It is during this time that the practice of naval architecture appeared, as skilled designers could produce designs that had an enormous impact in ship performance and capabilities. [1]

Contents

History

In the Middle Ages that preceded the early modern era, shipbuilding mainly utilized clinker building techniques, in which wooden hull planks were laid in an overlapping fashion so that they are both easier to construct and lighter. A common form of a clinker-built ship is Nordic longship associated with the vikings. [2] These vessels had the advantage of allowing a certain degree of twisting. However, carvel construction techniques, which involve hull planks being laid smoothly next to each other, allowed for much larger vessels that displaced more water, allowing for a much larger cargo capacity, which is necessary for long distance maritime travel. [3]

European designs

A popular design of European origin is the carrack, which utilized caravel construction techniques, allowing ships to increase in size dramatically, far past that which was capable with clinker building techniques. [4] Seen throughout the 14th and 15th century, these ships were used for trade between European powers and their foreign markets. The carrack featured anywhere from three to four masts, dominating ship designs until it was superseded by the galleon in the 16th century.

The galleon featured a similar design to the carrack as it involved multiple sails and was much larger than vessels before it. [5] With multiple decks, these ships allowed for both military and commercial use as the large cargo space allowed for the transportation of goods and multiple decks allowed for a large armament of cannons. This design saw a great amount of usage as European powers established overseas colonial empires. The Dutch fluyt ship could be recognized as a similar design to a galleon due to its pear-shaped hull. [6]

A common feature of European designs was the consideration for a large degree of armament as colonial powers had to defend from both aggressive rival European traders and pirates seeking to plunder goods. [7]

Asian designs

Many of the ships that were developed in Asia were characterized by a series of traits. For example, flat-bottomed craft were often prevalent in many Chinese vessels and were adapted for navigating in the shallow waters of the rivers that are common in China. For example, the Chinese treasure ship, known for its usage during Zheng He's seven voyages to bring distant goods and establish political and economic relationships with foreign powers. [8]

The most prevalent ship design originating from Asia during this era was the junk, which was developed centuries earlier in Ancient China during the Han dynasty. Known for its battened sail and close to the water line stature, junks saw usage in both shallow waters and extensive ocean voyages. [9]

Middle Eastern designs

Largely due to the absence of a large, oceanic body of water situated by the Middle East, most shipbuilding designs reflected that of shallow water vessels or iterations meant to prepare the ship for deep-sea voyage. The dhow was a long-hulled boat that was utilized for trading extensively in the Islamic world. [10] In the early modern era, Middle Eastern shipbuilding stagnated for the most part. However, dhows did receive a variety of adjustments in order to suit the goals of global trade of this time period.

The baghlah allowed for greater range as it was a dhow scaled up to include a greater number of sails and larger cargo hold. These modifications to the traditional dhow allowed it travel much further, even as far as the Spice Islands.

North and South American designs

During this time, indigenous populations were limited to basic vessels that were constructed in previous eras. However, colonizing Europeans powers utilized their ship technology to traverse the Atlantic Ocean to access the New World.

Related Research Articles

Ship Large watercraft

A ship is a large watercraft that travels the world's oceans and other sufficiently deep waterways, carrying cargo or passengers, or in support of specialized missions, such as defense, research and fishing. Ships are generally distinguished from boats, based on size, shape, load capacity and purpose. Ships have supported exploration, trade, warfare, migration, colonization, and science. After the 15th century, new crops that had come from and to the Americas via the European seafarers significantly contributed to world population growth. Ship transport is responsible for the largest portion of world commerce.

<span class="mw-page-title-main">Sailing ship</span> Large wind-powered water vessel

A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships carry square sails on each mast—the brig and full-rigged ship, said to be "ship-rigged" when there are three or more masts. Others carry only fore-and-aft sails on each mast, for instance some schooners. Still others employ a combination of square and fore-and-aft sails, including the barque, barquentine, and brigantine.

<span class="mw-page-title-main">Galleon</span> Large and multi-decked sailing ships

Galleons were large, multi-decked sailing ships first used as armed cargo carriers by European states from the 16th to 18th centuries during the age of sail and were the principal vessels drafted for use as warships until the Anglo-Dutch Wars of the mid-1600s. Galleons generally carried three or more masts with a lateen fore-and-aft rig on the rear masts, were carvel built with a prominent squared off raised stern, and used square-rigged sail plans on their fore-mast and main-masts.

Shipbuilding is the construction of ships and other floating vessels. It normally takes place in a specialized facility known as a shipyard. Shipbuilders, also called shipwrights, follow a specialized occupation that traces its roots to before recorded history.

<span class="mw-page-title-main">Caravel</span> Type of sailing ship

The caravel is a small maneuverable sailing ship used in the 15th century by the Portuguese to explore along the West African coast and into the Atlantic Ocean. The lateen sails gave it speed and the capacity for sailing windward (beating). Caravels were used by the Portuguese and Castilians for the oceanic exploration voyages during the 15th and 16th centuries, during the Age of Discovery.

<span class="mw-page-title-main">Koch (boat)</span> Sailing ship of Russian origin used to explore the Arctic in the 15th and 16th centuries

The koch was a special type of small one or two mast wooden sailing ships designed and used in Russia for transpolar voyages in ice conditions of the Arctic seas, popular among the Pomors.

<span class="mw-page-title-main">Cog (ship)</span> Type of cargo ship of the 12th–14th centuries

A cog is a type of ship that first appeared in the 10th century, and was widely used from around the 12th century on. Cogs were clinker-built, generally of oak. These vessels were fitted with a single mast and a square-rigged single sail. They were mostly associated with seagoing trade in north-west medieval Europe, especially the Hanseatic League. Typical seagoing cogs ranged from about 15 to 25 meters in length, with a beam of 5 to 8 meters and were 30–200 tons burthen. Cogs were rarely as large as 300 tons although a few were considerably larger, over 1,000 tons.

<span class="mw-page-title-main">Carvel (boat building)</span> Method of building a boat

Carvel built or carvel planking is a method of boat building in which hull planks are laid edge to edge and fastened to a robust frame, thereby forming a smooth surface. Traditionally the planks are neither attached to, nor slotted into, each other, having only a caulking sealant between the planks to keep water out. Modern carvel builders may attach the planks to each other with glues and fixings. It is a "frame first" method of hull construction, where the shape is determined by the framework onto which the planks are fixed. This is in contrast to "plank first" or "shell first" methods, where the outer skin of the hull is made and then reinforced by the insertion of timbers that are fitted to that shape. The most common modern "plank first" method is clinker construction; in the classical period "plank first" involved joining the edges of planks with mortise and tenon joints within the thickness of the timbers, superficially giving the smooth-hull appearance of carvel construction, but achieved by entirely different means.

<span class="mw-page-title-main">Boat building</span> Design and construction of floating vessels

Boat building is the design and construction of boats and their systems. This includes at a minimum a hull, with propulsion, mechanical, navigation, safety and other systems as a craft requires.

<span class="mw-page-title-main">Carrack</span> Type of sailing ship in the 15th century

A carrack is a three- or four-masted ocean-going sailing ship that was developed in the 14th to 15th centuries in Europe, most notably in Portugal. Evolved from the single-masted cog, the carrack was first used for European trade from the Mediterranean to the Baltic and quickly found use with the newly found wealth of the trade between Europe and Africa and then the trans-Atlantic trade with the Americas. In their most advanced forms, they were used by the Portuguese for trade between Europe and Asia starting in the late 15th century, before eventually being superseded in the 17th century by the galleon, introduced in the 16th century.

<span class="mw-page-title-main">Fluyt</span> Dutch type of sailing vessel

A fluyt is a Dutch type of sailing vessel originally designed by the shipwrights of Hoorn as a dedicated cargo vessel. Originating in the Dutch Republic in the 16th century, the vessel was designed to facilitate transoceanic delivery with the maximum of space and crew efficiency. Unlike rivals, it was not built for conversion in wartime to a warship, so it was cheaper to build and carried twice the cargo, and could be handled by a smaller crew. Construction by specialized shipyards using new tools made it half the cost of rival ships. These factors combined to sharply lower the cost of transportation for Dutch merchants, giving them a major competitive advantage. The fluyt was a significant factor in the 17th-century rise of the Dutch seaborne empire. In 1670 the Dutch merchant marine totalled 568,000 tons of shipping—about half the European total.

<span class="mw-page-title-main">Clinker (boat building)</span> Scandinavian method of boat building

Clinker built is a method of boat building where the edges of hull planks overlap each other. Where necessary in larger craft, shorter planks can be joined end to end, creating a longer strake or hull plank. The technique originated in Scandinavia, and was successfully used by the Anglo-Saxons, Frisians, Scandinavians, typically in the vessels known as cogs employed by the Hanseatic League. Carvel construction, where plank edges are butted smoothly, seam to seam, supplanted clinker construction in large vessels as the demand for capacity surpassed the limits of clinker construction..

<span class="mw-page-title-main">Strake</span>

On a vessel's hull, a strake is a longitudinal course of planking or plating which runs from the boat's stempost to the sternpost or transom. The garboard strakes are the two immediately adjacent to the keel on each side.

A chine in boat design is a sharp change in angle in the cross section of a hull. The chine typically arises from the use of sheet materials as the mode of construction.

The ships of Medieval Europe were powered by sail, oar, or both. There was a large variety, mostly based on much older, conservative designs. Although wider and more frequent communications within Europe meant exposure to a variety of improvements, experimental failures were costly and rarely attempted. Ships in the north were influenced by Viking vessels, while those in the south by classical or Roman vessels. However, there was technological change. The different traditions used different construction methods; clinker in the north, carvel in the south. By the end of the period, carvel construction would come to dominate the building of large ships. The period would also see a shift from the steering oar or side rudder to the stern rudder and the development from single-masted to multi-masted ships. As the area is connected by water, people in the Mediterranean built different kinds of ships to accommodate different sea levels and climates. Within the Mediterranean area during the Medieval times ships were used for a multitude of reasons, like war, trade, and exploration.

<span class="mw-page-title-main">Humber keel</span>

The Humber keel was a type of single-masted, square-rigged sailing craft used for inshore and inland cargo transport around Hull and the Humber Estuary, in the United Kingdom, particularly through the late 19th and early 20th centuries.

<span class="mw-page-title-main">Hulk (medieval ship type)</span>

A hulk was a type of medieval sea craft, a technological predecessor of the carrack and caravel. The hulk appears to have remained a relatively minor type of sailing ship apparently peculiar to the Low Countries of Europe where it was probably used primarily as a river or canal boat, with limited potential for coastal cruising. The only evidence of hulks is from legal documents and iconography.

<span class="mw-page-title-main">Iberian ship development, 1400–1600</span> Technological development due to wars

Due to centuries of constant conflict, warfare and daily life in the Iberian Peninsula were interlinked. Small, lightly equipped armies were maintained at all times. The near-constant state of war resulted in a need for maritime experience, ship technology, power, and organization. This led the Crowns of Aragon, Portugal, and later Castile, to put their efforts into the sea.

<span class="mw-page-title-main">Square-rigged caravel</span>

The square-rigged caravel, was a sailing ship created by the Portuguese in the second half of the fifteenth century. A much larger version of the caravel, its use was most notorious beginning in the end of that century. The square-rigged caravel held a notable role in the Portuguese expansion during the age of discovery, especially in the first half of the sixteenth century, for its exceptional maneuverability and combat capabilities. This ship was also sometimes adopted by other European powers. The hull was galleon-shaped, and some experts consider this vessel a forerunner of the fighting galleon, by the name of caravela de armada.

References

  1. Tipping, Colin (November 1998). Technical Change and the Ship Draughtsman. Taylor & Francis Online.
  2. "Clinker and Caravel – different types of planking". The Independent. Retrieved 2018-07-27.
  3. Carvel Planking Texts for Sailboats—Richard Joyce Montana Tech
  4. Konstam, Angus (November 1, 2002). History of Shipwrecks (1st ed.). Lyons Press.
  5. Lane, Kris (February 1, 1998). Pillaging the Empire: Piracy in the Americas, 1500-1750 (Latin American Realities (1st ed.). Routledge.
  6. Blanning, Tim (March 25, 2008). Pursuit of Glory: Europe 1648 to 1815 (4th Printing ed.). Penguin UK.
  7. Diffie, Bailey (1977). Foundations of the Portuguese Empire. University of Minnesota Press.
  8. Church, Sally (2005). Zheng He: An Investigation Into the Plausibility of 450ft Treasure Ships. Taylor & Francis, Ltd.
  9. Mudie, Rosemary (1980). The Story of the Sailing Ship. Exeter Books.
  10. Al Salimi, Abdulrahman (December 15, 2016). A Maritime History (Studies on Ibadism and Oman). Georg Olms Verlag.