SimSig

Last updated
SimSig
SimSig Logo.jpg
Developer(s) Geoff Mayo
Platform(s) Windows
Linux using WINE
Genre(s) Train simulation
Mode(s) Single-player / multiplayer / online / cooperative

SimSig is a mixed donationware [1] and commercial Windows-based train simulator of modern railway signalling systems in Great Britain, from the point of view of a railway signaller. [2] Users have also had success running SimSig on Linux using Wine. [3]

Contents

The program was written in Delphi 6, a dialect of Object Pascal, by Geoff Mayo and has been in development since the late 1990s. Visually, it resembles the British Rail Integrated Electronic Control Centre (IECC), though most of the simulations do not cover areas operated by IECC-based signal boxes. It simulates overlaps, approach locking, time-of-operation point locking, shunt routes, warner routes, [4] call-on routes, and more.

Railtrack asked for a "professional" version of SimSig, now known as TREsim, [5] which is currently used to train signallers at every Network Rail IECC and several panel signal boxes around Great Britain. [6] [7] [8]

Gameplay

Train motion is simulated according to train type and loading, [9] and is controlled via the use of timetables. With a keyboard and mouse, the player sets routes and operates level crossings as necessary as well as simulations/timetable specific tasks such as operating ground frames. Solid State Interlockings (SSIs), the main electronic technology in use at present on British railways, along with approach locking, swinging overlaps, shunt routes, warner routes and call-on routes are all available. [9] The simulations may be played in real time or sped up. The aim of play is to achieve a good score by overcoming problems and ensuring on-time train running. Points are accumulated for good operation and deducted for errors or late running.

Sounds can be enabled for phone messages, warnings, failures, and Train Ready To Start indicators. Automatic Route Setting, Automatic Headcode Insertion [9] and token systems for single line working [10] are functional in some of the available simulations. Most simulations have various levels of difficulty, ranging from beginner to difficult scenarios [11] with engineering possessions of tracks; train delays; bad weather; or points, signal and track circuit failures.

Although produced by railway software engineers to ensure a high degree of realism, [9] [12] [13] the simulations are usable by those without any in-depth or professional knowledge of signalling systems. Most simulations can be joined over the Internet to share the workload. Some simulations can be linked to form a chain of signal boxes for extended operation.

A total of 40 simulations are currently available covering England, Wales and Scotland. [14] Beta versions are no longer publicly available.

Screenshot of the Exeter version of Simsig Exetersimsig.png
Screenshot of the Exeter version of Simsig

Many of the older simulations are based on the real life IECC screen layout with multiple pages or panels to display different parts of the simulation whereas the newer simulations have one scrollable panel which covers the entire simulation.

As of July 2013, a new method of installing, running and updating compatible simulations, the SimSig Loader, was introduced.

The SimSig loader allows for the opening and updating of most recent simulations via a single program as opposed to the individual .exe files of previous simulations. In September 2018, support for using operating systems prior to Windows 7 to find updates was discontinued. This includes both the loader and licence manager.

User content

User-created timetables simulating modern, historical, and fictional scenarios are available through simulation forums and other web sites. Timetables may be created with the built-in editor [9] or an imported text file. Sources for timetabling information include official Working Timetables (WTT) and historic published timetables such as Bradshaws.

A timetable file converter allowing easy conversion between timetables and text files is available from a third-party site. [15]

Reception

SimSig is referenced in the 2nd edition of Railway Operation and Control by Professor Jörn Pachl of University of Braunschweig - Institute of Technology. [16] Doctor Marcelo Moretti Fioroni of the University of São Paulo, in a paper on rail simulations and their applications in Brazil, cited SimSig as an extremely realistic simulation, reproducing real scenarios. [17]

The Rail Safety and Standards Board recommends the use of simulation software as a classroom aid and specifically mentions the SimSig website as a source [18] [ verification needed ]:

Load and run rail (train and signal) simulation software and obtain an appreciation of the role of drivers and signallers in the rail system. Rail signalling simulation software may be downloaded from

www.simsig.co.uk

SimSig has been described by Alan Marshall of the North London Society of Model Engineers as "a remarkable and complex simulator that will test your skills and it demands quite a bit of patience to learn how to operate a modern signal box successfully.". [19]

In 2009 the National Model Railroad Association convention at Fort Wayne hosted workshops demonstrating the use of SimSig for model rail simulations. [20]

The information in the Edinburgh simulation has been referenced by the Rail Action Group, East of Scotland (RAGES) in discussion with the railway authorities and has been noted in their published newsletters. [21] [22]

Related Research Articles

<span class="mw-page-title-main">Railway signalling</span> The principle of signals used to control railway traffic

Railway signalling (BE), or railroad signaling (AE), is a system used to control the movement of railway traffic. Trains move on fixed rails, making them uniquely susceptible to collision. This susceptibility is exacerbated by the enormous weight and inertia of a train, which makes it difficult to quickly stop when encountering an obstacle. In the UK, the Regulation of Railways Act 1889 introduced a series of requirements on matters such as the implementation of interlocked block signalling and other safety measures as a direct result of the Armagh rail disaster in that year.

<span class="mw-page-title-main">Train simulator</span> Computer-based simulation of rail transport operations

A train simulator is a computer based simulation of rail transport operations. They are generally large complicated software packages modeling a 3D virtual reality world implemented both as commercial trainers, and consumer computer game software with 'play modes' which lets the user interact by stepping inside the virtual world. Because of the near view modeling, often at speed, train simulator software is generally far more complicated software to write and implement than flight simulator programs.

<span class="mw-page-title-main">York railway station</span> Railway station in York, England

York railway station is on the East Coast Main Line serving the cathedral city of York, North Yorkshire, England. It is 188 miles 40 chains (303.4 km) north of London King's Cross and on the main line it is situated between Doncaster to the south and Thirsk to the north. As of June 2018, the station is operated by London North Eastern Railway.

<span class="mw-page-title-main">Signal passed at danger</span> Train passing stop signal without authority

A signal passed at danger (SPAD), known in the United States as a stop signal overrun (SSO) and in Canada as passing a stop signal, is an event on a railway where a train passes a stop signal without authority. This is also known as running a red.

<span class="mw-page-title-main">Integrated Electronic Control Centre</span> British railway signalling technology

The Integrated Electronic Control Centre (IECC) was developed in the late 1980s by the British Rail Research Division for UK-based railway signalling centres, although variations exist around the world. It is the most widely deployed VDU based signalling control system in the UK, with over 50 workstations in control centres that manage many of the most complex and busy areas of the network.

<span class="mw-page-title-main">Sherborne railway station</span> Railway station in Dorset, England

Sherborne railway station serves the town of Sherborne in Dorset, England. It is situated on the West of England Main Line, 118 miles 4 chains (190.0 km) down the line from London Waterloo and is currently operated by South Western Railway.

<span class="mw-page-title-main">Blackrod railway station</span> Railway station in Greater Manchester, England

Blackrod railway station serves the towns of Blackrod and Horwich, Greater Manchester, England. It is 6.5 miles north west of Bolton railway station. It is just 1+1⁄4 miles (2.0 km) from the town centre of Horwich - closer than Horwich Parkway station.

<span class="mw-page-title-main">Barton line</span> Railway line in North and North East Lincolnshire, England

The Barton line is a railway line in North and North East Lincolnshire, England. It runs from Barton-upon-Humber south east to Cleethorpes and was designated by the Department for Transport as a community rail line in February 2007. Barton station is near to the Humber Bridge. It is situated on the south bank of the Humber Estuary.

<span class="mw-page-title-main">UK railway signalling</span> Rail traffic control systems used in the United Kingdom

The railway signalling system used across the majority of the United Kingdom rail network uses lineside signals to control the movement and speed of trains.

<span class="mw-page-title-main">Thirsk railway station</span> Railway station in North Yorkshire, England

Thirsk railway station is on the East Coast Main Line and serves the market town of Thirsk, North Yorkshire, England. It is 210 miles 56 chains (339.1 km) down the line from London King's Cross and is situated between York to the south and Northallerton to the north. Its three-letter station code is THI.

<span class="mw-page-title-main">Rule 55</span> British railway operating rule

Rule 55 was an operating rule which applied on British railways in the 19th and 20th centuries. It was superseded by the modular rulebook following re-privatisation of the railways. It survives, very differently named: the driver of a train waiting at a signal on a running line must remind the signaller of its presence.

<span class="mw-page-title-main">Detonator (railway)</span> Signaling system for trains

A railway detonator, or fog signal is a coin-sized device that is used as a loud warning signal to train drivers. It is placed on the top of the rail, usually secured with two lead straps, one on each side. When the wheel of the train passes over, it explodes, emitting a loud bang. It was invented in 1841 by English inventor Edward Alfred Cowper.

<span class="mw-page-title-main">Slippery rail</span> Loss of traction in locomotives

Slippery rail, or low railhead adhesion, is a condition of railways (railroads) where contamination of the railhead reduces the traction between the wheel and the rail. This can lead to wheelslip when the train is taking power, and wheelslide when the train is braking. One common cause of contamination is fallen leaves that adhere to the railhead of railway tracks. The condition results in significant reduction in friction between train wheels and rails, and in extreme cases can render the track temporarily unusable. In Britain, the situation is colloquially referred to as "leaves on the line".

<span class="mw-page-title-main">Automatic block signaling</span> A railroad communications system

Automatic block signaling (ABS), spelled automatic block signalling or called track circuit block (TCB) in the UK, is a railroad communications system that consists of a series of signals that divide a railway line into a series of sections, called blocks. The system controls the movement of trains between the blocks using automatic signals. ABS operation is designed to allow trains operating in the same direction to follow each other in a safe manner without risk of rear-end collision.

In Great Britain, the Sectional Appendix is a railway document compiled by Network Rail and is the official definition of railway infrastructure, giving a detailed description of all railway lines owned by Network Rail. It has traditionally been published in printed format, originally as a bound book and subsequently in loose-leaf format, for ease of updating.

British Rail Telecommunications was created in 1992 by British Rail (BR). It was the largest private telecoms network in Britain, consisting of 17,000 route kilometres of fibre optic and copper cable which connected every major city and town in the country and provided links to continental Europe through the Channel Tunnel.

York Integrated Electronic Control Centre was a major signalling control centre on the East Coast Main Line railway between London and Edinburgh. The centre also contained the electrical control centre for the line and the LNE regional control office of Network Rail. Its responsibility for signalling across Yorkshire was transferred to York Rail Operating Centre in December 2018.

<span class="mw-page-title-main">Rail operating centre</span> Regional signalling centres on the mainland British railway network

A rail operating centre (ROC) is a building that houses all signallers, signalling equipment, ancillaries and operators for a specific region or route on the United Kingdom's main rail network. The ROC supplants the work of several other signal boxes which have thus become redundant.

Route knowledge is one of the core skills together with train handling and a full understanding of railway rules, which the operating crew must possess in order to be able to operate a train safely.

<span class="mw-page-title-main">York Rail Operating Centre</span> Regional railway signalling centre in York, Northern England

York Rail Operating Centre is a Rail operating centre (ROC) located at the south western end of York railway station in York, England. The site is one of twelve that will control all signalling across the mainland of the United Kingdom. It was opened in stages from 2014 onwards, with responsibility for signalling becoming active in January 2015. The York ROC accepted the role of its predecessor, the adjacent York Integrated Electronic Control Centre (IECC), in December 2018.

References

  1. ↑ "Donate". www.simsig.co.uk. Retrieved 2009-02-07.
  2. ↑ "SimSig". Gensheet. Archived from the original on 2009-02-21. Retrieved 2009-01-01.
  3. ↑ "WineHQ — SimSig 2.103". Wine HQ. Retrieved 2008-12-26.
  4. ↑ "Code of Practice GK/RC 0721; Section 1.4.2.3 Main or Warner Class Route Selection" (PDF). Railway Group Standards. Retrieved 2015-07-01.[ permanent dead link ]
  5. ↑ "Story of Swindon B and sale to the Railway Engineering Company". SimSig. Archived from the original on 2007-07-28. Retrieved 2008-12-27.
  6. ↑ Raymond Keattch (18 April 2004). "Amazing news for me" . Retrieved 2008-12-27.
  7. ↑ "Strainstall Acquires The Railway Engineering Company". Strainstall UK. Archived from the original on 2009-02-21. Retrieved 2009-01-01.
  8. ↑ Mayo, Geoff (June 2009). "Computer Simulation" (PDF). IRSE News (146): 14–15. Retrieved 13 March 2012.
  9. 1 2 3 4 5 "Simsig — Signal box simulation software — railfest 2004 - National Railway Museum, York". Archived from the original on 2004-12-11. Retrieved 2009-01-14.
  10. ↑ "Online Rulebook Section TW1 Subsection 32 - Single lines worked with a token" (PDF). RSSB. Archived from the original (PDF) on 2013-12-19. Retrieved 2015-07-01.
  11. ↑ "Signalling Simulations". District Dave. Retrieved 2008-12-27.
  12. ↑ "Sundry Strategy Titles". TRANSPORT SIMULATION UK. Retrieved 2008-12-27.
  13. ↑ John Hinson. "Games and Simulations". The Signal Box. Retrieved 2009-01-01. SimSig is a remarkable and highly realistic IECC simulation by Geoff Mayo
  14. ↑ "Simulations Manuals". SimSig. Retrieved 2014-01-27.
  15. ↑ "SimSig". Clive Feather. Retrieved 2008-12-26.
  16. ↑ Pahl, Jörn [in German] (2009). Railway Operation and Control. Mountlake Terrace, WA, USA: Vtd Rail Publishing. pp. 127, 226. ISBN   978-0-9719915-1-4.
  17. ↑ Moretti Fioroni, Marcello (2007). "Simulação Em Ciclo Fechado De Malhas Ferroviárias E Suas Applicações No Brasil: Avaliação De Alternativas Para O Direcionamento De Composições" (PDF) (in Portuguese). São Paulo: Universidade de São Paulo. p. 61. Retrieved 1 September 2010.
  18. ↑ "Development of rail safety material for teachers and schools (T064a)". www.rssb.co.uk. Rail Safety and Standards Board. Retrieved 15 October 2018.
  19. ↑ Marshall, Alan (September 2006). "Dipping a toe into Signalling" (PDF). North London Society of Model Engineers Newsletter. No. 673. London: NLSME. p. 21. Retrieved 2008-12-27.
  20. ↑ "Tower Operations, United KIngdom Style" (PDF). NMRA NCR Convention. Retrieved 2009-08-28.[ dead link ]
  21. ↑ Rail Action Group, East of Scotland (January 2009). "The Rages Rag, Issue No. 40 - January 2009" (PDF). The Rages Rag (40): 3. Archived from the original (PDF) on 2011-10-06. Retrieved 2011-06-07.
  22. ↑ Rail Action Group, East of Scotland (January 2011). "The Rages Rag, Issue No. 48 - January 2011" (PDF). The Rages Rag (48): 2. Archived from the original (PDF) on 2011-10-06. Retrieved 2011-06-07.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.