Soarin' Eagle

Last updated

Soarin' Eagle
Lift Soaring Eagle Scream Zone Luna Park Coney Island.JPG
Luna Park, Coney Island
Park section Scream Zone
Coordinates 40°34′26″N73°58′50″W / 40.573848°N 73.980459°W / 40.573848; -73.980459 Coordinates: 40°34′26″N73°58′50″W / 40.573848°N 73.980459°W / 40.573848; -73.980459
StatusOperating
Opening dateApril 2011 (2011-04)
Elitch Gardens
Coordinates 39°44′54″N105°00′42″W / 39.748338°N 105.011569°W / 39.748338; -105.011569
StatusRelocated to Luna Park
Opening dateMay 18, 2002 (2002-05-18)
Closing date2007 (2007)
General statistics
Type Steel  Flying
Manufacturer Zamperla
Designer Werner Stengel
ModelVolare
Lift/launch systemSpiral Lift
Height50 ft (15 m)
Drop17 ft (5.2 m)
Length1,282.8 ft (391.0 m)
Speed25.7 mph (41.4 km/h)
Inversions 2
Duration0:48
Max vertical angle31°
Capacity500 riders per hour
G-force 3.3
Height restriction52 in (132 cm)
Trains7 trains with a single car. Riders are arranged 4 across in a single row for a total of 4 riders per train.
Soarin' Eagle at RCDB
Pictures of Soarin' Eagle at RCDB

Soarin' Eagle is a steel roller coaster located at the Scream Zone at Luna Park in Coney Island, Brooklyn, New York. [1] The ride was the first ever Zamperla "Volare" roller coaster when it opened in 2002 at Elitch Gardens in Denver, Colorado, as the Flying Coaster. [2] [3] The Elitch Gardens ride was constructed by Martin & Vleminckx. [4] The Volare, the cheapest option for a flying roller coaster, contains a compact layout with a distinctive spiral lift hill. In late 2010 the ride got dismantled and relocated to Luna Park in Coney Island, where it opened in April 2011 as the Soarin' Eagle. [5] The ride has an identical sister, Hero, which opened in July 2013 at Flamingo Land in North Yorkshire.

Contents

Layout

Riders begin their experience of the Soarin' Eagle by boarding the four-across trains as they pass slowly along a moving walkway. The trains are originally upright so riders can walk up from behind and enter from a standing position. Each rider must select their desired height on a five rung series of ladder-like steps which determine how a rider will be positioned when the train tilts to the horizontal position upon leaving the station. Before departure, a cage is latched down over the backs of the trains to secure the riders for the duration of the trip. The train then heads up the spiral lift hill, which slowly twirls the train upward. After the lift, the train then heads down a short, steep drop and then ascends slowly back up. A hairpin turn then occurs and takes riders through the first Barrel Roll inversion. The train then hits another hairpin turn into another short drop. Another hairpin turn then leads the train into the second Barrel Roll and turns again.

The train is then slowed by the trim brakes and then twists through another set of hairpin turns and twists until the train slows by the final brake run. The train enters the station and completes the experience.

See also

Related Research Articles

Wooden roller coaster Type of roller coaster

A wooden roller coaster is most often classified as a roller coaster with running rails made of flattened steel strips mounted on laminated wooden track. Occasionally, the support structure may be made out of a steel lattice or truss, but the ride remains classified as a wooden roller coaster due to the track design. The type of wood typically used in the construction of wooden coasters is Southern Yellow Pine, usually grown in the US and the rest of North America.

Philadelphia Toboggan Coasters Roller coaster manufacturer

Philadelphia Toboggan Coasters (PTC) is one of the oldest existing roller coaster manufacturing companies in the world. Based in Hatfield, Pennsylvania, it was established in 1904 by Henry Auchey and Chester Albright under the name Philadelphia Toboggan Company. The company manufactured carousels, wooden roller coasters, toboggans and later, roller coaster trains.

Flying roller coaster

A flying roller coaster is a type of roller coaster meant to simulate the sensations of flight by harnessing riders in a prone position during the duration of the ride. The roller coaster cars are suspended below the track, with riders secured such that their backs are parallel to the track.

Bolliger & Mabillard, officially Bolliger & Mabillard Consulting Engineers, Inc. and often abbreviated B&M, is a roller coaster design consultancy based in Monthey, Switzerland. The company was founded in 1988 by Walter Bolliger and Claude Mabillard, both of whom had worked for Giovanola.

Coney Island Cyclone Historic roller coaster in Coney Island, Brooklyn

The Coney Island Cyclone is a wooden roller coaster at Luna Park in Coney Island, Brooklyn, New York City. Designed by Vernon Keenan, it opened to the public on June 26, 1927. The coaster is on a plot of land at the intersection of Surf Avenue and West 10th Street. The Cyclone reaches a maximum speed of 60 miles per hour (97 km/h) and has a total track length of 2,640 feet (800 m), with a maximum height of 85 feet (26 m).

Boomerang (roller coaster) Steel roller coaster

Boomerang is a model of roller coaster manufactured and designed by Vekoma, a Dutch manufacturer. The roller coaster model name is from the hunting implement based on the traditions of the Indigenous Australians. As of June 2021 there are 55 Boomerangs operating.

Suspended Looping Coaster Type of roller coaster

The Suspended Looping Coaster is a model of steel inverted roller coaster built by Vekoma. There are at least 39 different installations across the world. The minimum rider height requirement is 130 centimetres. Vekoma is now marketing a Suspended Thrill Coaster as a successor to the Suspended Looping Coaster. The Odyssey is the largest, fastest and tallest SLC ever built at Fantasy Island in the UK.

Batwing (roller coaster) Flying roller coaster at Six Flags America

Batwing is a steel flying roller coaster built by Vekoma at Six Flags America in Prince George's County, Maryland. This is nearly identical to Nighthawk at Carowinds, however that ride has a slightly different ending, and different paint scheme. The ride is also a clone of the now-defunct Firehawk at Kings Island.

Zamperla An Italian based steel coaster and flat rides manufacturer

Antonio Zamperla S.p.A. is an Italian design and manufacturing company founded in 1966. It is best known for creating family rides, thrill rides and roller coasters worldwide. The company also makes smaller coin-operated rides commonly found inside shopping malls.

Dive Coaster

The Dive Coaster is a steel roller coaster model developed and engineered by Bolliger & Mabillard. The design features one or more near-vertical drops that are approximately 90 degrees, which provide a moment of free-falling for passengers. The experience is enhanced by unique trains that seat up to ten riders per row, spanning only two or three rows total. Unlike traditional train design, this distinguishing aspect gives all passengers virtually the same experience throughout the course of the ride. Another defining characteristic of Dive Coasters is the holding brake at the top of the lift hill that holds the train momentarily right as it enters the first drop, suspending some passengers with a view looking straight down and releasing suddenly moments later.

Suspended Family Coaster

A Suspended Family Coaster is a steel inverted roller coaster built by Vekoma designed for families with no inversions. Just like all inverted roller coasters the train runs under the track with the seats directly attached to the wheel carriage. This latter attribute is what sets it apart from the older suspended swinging coaster, which runs under the track, but "swings" via a pivoting bar attached to the wheel carriage.

Firehawk (roller coaster) Former roller coaster at Kings Island

Firehawk was a flying roller coaster located at Kings Island in Mason, Ohio. Manufactured by Vekoma, it originally opened as X-Flight at Six Flags Worlds of Adventure on May 26, 2001, billed as the Midwest's first and only flying roller coaster. Cedar Fair purchased Worlds of Adventure in 2004 and began efforts to downsize the park. X-Flight was relocated to Kings Island following the 2006 season, where it reopened as Firehawk on May 26, 2007.

Reverchon Industries was a developer, designer and manufacturer of amusement park attractions that were sold all over the world. The company went into liquidation in September 2008, filing for bankruptcy and closing down their manufacturing and operations plant.

Mack Rides

Mack Rides GmbH & Co KG, also known simply as Mack Rides, is a German company that designs and constructs amusement rides, based in Waldkirch, Baden-Württemberg, Germany. It is one of the world's oldest amusement industry suppliers, and builds many types of rides, including flat rides, dark rides, log flumes, tow boat rides and roller coasters. The family that owns Mack Rides also owns Europa-Park.

Luna Park (Coney Island, 2010) Amusement park in Coney Island, Brooklyn, New York

Luna Park is the name of an amusement park in Coney Island, Brooklyn, New York City. It opened on May 29, 2010, at the site of Astroland, an amusement park that had been in operation from 1962 to 2008, and Dreamland, which operated at the same site for the 2009 season. It was named after the original 1903 Luna Park which operated until 1944 on a site just north of the current park's 1000 Surf Avenue location.

Wing Coaster

Wing Coaster is engineering firm Bolliger & Mabillard’s designation for its winged roller coaster designs. Winged roller coasters are a type of steel roller coaster where pairs of riders sit on either side of a roller coaster track in which nothing is above or below the riders. B&M began development on the first Wing Coaster between 2007 and 2008 leading to the opening of Raptor at Gardaland on 1 April 2011. There are currently sixteen B&M-designed Wing Coasters either under construction or operating worldwide as of December 2020.

This is a list of events and openings related to amusement parks that occurred in 2011. These various lists are not exhaustive.

Thunderbolt (2014 roller coaster)

Thunderbolt is a steel roller coaster at Luna Park in Coney Island, Brooklyn, New York City. It is located near Surf Avenue and West 15th Street, on the Riegelmann Boardwalk next to the B&B Carousell.

Martin & Vleminckx

Martin & Vleminckx is a roller coaster manufacturing and construction company headquartered in Montreal, Quebec, Canada with an affiliated office and manufacturing facility in Haines City, Florida, United States, and two subsidiaries, including a warehouse, in China.

References

  1. Marden, Duane. "Soarin' Eagle  (Scream Zone)". Roller Coaster DataBase . Retrieved July 4, 2011.
  2. Marden, Duane. "Flying Coaster  (Elitch Gardens)". Roller Coaster DataBase . Retrieved July 4, 2011.
  3. Marden, Duane. "Roller Coaster Search Results  (Zamperla Volare)". Roller Coaster DataBase . Retrieved July 4, 2011.
  4. "Zamperla". Martin & Vleminckx. Archived from the original on November 25, 2013. Retrieved November 16, 2013.
  5. Calder, Rich (January 31, 2011). "Zamperla breaks ground on new Coney Island coaster, another to follow". New York Post. Retrieved July 4, 2011.