Staffordshire figures are a type of popular pottery figurine made in England from the 18th century onward. Many Staffordshire figures made from 1740 to 1900 were produced by small potteries and makers' marks are generally absent. Most Victorian figures (1837 to 1900) were designed to stand on a shelf or mantlepiece and are therefore only modelled and decorated where visible from the front and sides. These are known as 'flatbacks'. They were shaped either by press moulding or slip casting. [2]
Figures were mainly made in Staffordshire but also in other counties and Scotland; all these may loosely be termed "Staffordshire figures". The figures described by the term are normally in earthenware, though early ones may be in stoneware, and the more expensive porcelain figures by the larger potteries in Staffordshire and elsewhere in England are not normally included under the term. These reflected metropolitan and international styles, and were more carefully modelled and painted. For a period at the end of the 18th century the finest Staffordshire figures attempted to compete in this market, but gradually makers abandoned these attempts and settled for a larger mass-market buying cheaper figures.
Of the huge variety of figures produced, the Staffordshire dog figurine was the most ubiquitous, especially as a pair of King Charles Spaniels for a mantelpiece. Once cheap, Staffordshire figures are extensively collected in the English-speaking world, and modern imitations and forgeries abound. The rarest figures, mostly early ones, can sometimes fetch high prices. A pew group of c. 1745 sold for $US168,000 at a Christie's auction in 2006, [4] and in 1987 Sotheby's sold one for $US179,520. [5]
The figures vary considerably in size: around five to seven inches tall is the most typical for a standing figure, though equestrian figures and bocage groups often reach ten inches. The largest figures, from about 1780 to 1810, can be 20 inches tall, and the smallest as little as 2 inches. They have been keenly collected over the past century, although even the late mass-market figures are now expensive, and there is a considerable literature devoted to them.
Various manufacturing processes were in use at different periods of time, [6] frequently overlapping. Four categories for those produced up to 1900 are [7] :
Staffordshire figures began to be produced around the 1740s, or perhaps the 1730s. Initially they had little or no painted colour, typically black dots to highlight eyes, buttons, or shoes. Early subjects included genre figures of ladies and gentlemen, musicians, lovers, soldiers and the like. Two elaborate group subjects were the "arbour group", with two lovers seated in front of a bocage of foliage, and the "pew group" of figures sitting on a high-backed bench. The arbour group is a simplification of porcelain groups, whereas the pew group is more original to Staffordshire. [12] Typically it has two or three figures, with a woman in the centre; great attention is paid to details of hair and clothing. The setting is not church, as the usual name suggests, but a comfortable home or inn, where high-backed settles (protecting from draughts) were a common piece of furniture. [13]
The groups are usually in salt-glazed stoneware, but smaller single figures usually in glazed earthenware, which may be agateware, mixing white and brown clay immediately before shaping to give a marbling effect. The pew groups were apparently usually shaped and constructed individually, built up from "slabs" rolled flat, [14] except for the hands and faces, [15] but otherwise moulds were used to form even the early figures.
There are animal figures, with cats rather outnumbering dogs at this period. Some animals are very loosely copying the styles of equivalent animals in Chinese export porcelain. Animals are more likely to be in salt-glazed stoneware, with green, brown and blue glazes the main colours, applied in broad strokes as highlights.
The earliest figures cannot be attributed to specific makers, but by 1750 some figures are given to notable potters, such as Thomas Whieldon, who probably invented tortoiseshell ware in the late 1740s. Others, by his imitators, are called "Whieldon-type"; many were probably made by William Greatbatch, formerly with Whieldon.
From about 1770, as the Staffordshire industry continued to grow, and improve its products, the artistic standards of the best figures improved considerably, though at the loss of most of the folk art charm of the previous period. The subjects became less rustic, and drew closer to those made in porcelain. These included allegorical sets of subjects such as the Four Seasons and personifications of virtues, and portraits of notable figues, often as busts, could be finely modelled. Like other Staffordshire wares, the figures were increasingly reaching the American market, shipped from Liverpool, and the Founding Fathers were well-represented; some of these were also no doubt sold in Britain.
More makers and modellers are identifiable, including three generations of Ralph Woods. Ralph Wood I had modelled for Whieldon, and was a cousin of Enoch Wood, whose father Aaron had also worked for Whieldon. Both families ran large potteries, making a wide range of wares. The Woods were themselves modellers, but other potteries who aimed to compete with porcelain used specialist modellers like John Voyez, who had been fired and then prosecuted by Josiah Wedgwood, and was jailed in 1769.
The figures were now typically painted, either in coloured lead-glazes or in overglaze enamels; this was generally very carefully done, much more so than in the next century, using a wide range of colours. Transfer-printing, which was becoming highly important for tablewares, was not really practical for figures, [16] and hand-painting in overglaze enamels became the norm. The large figures aimed at the top of the market are especially a feature of the period from about 1785 to 1815, but cheaper and cruder figures continued to be produced.
The Demosthenes model shown below first appears about 1785, by Enoch Wood. It is sometimes called Saint Paul Preaching or Eloquence, and possibly was sometimes marketed as such, but the relief scene on the podium strongly suggests it was designed to depict the Greek orator who trained himself by addressing the sea. [17]
As with porcelain figures, the same model might be produced in fully painted and plain versions, and the painting often varies greatly between different examples, especially when moulds were in use for several years. Many model types introduced in this period remained popular until at least the middle of the next century, for example the Parson and Moses type, derived from a print of 1736 by William Hogarth, The Sleeping Congregation. [18]
In the 19th century, especially after 1820, earthenware figures very largely abandoned attempts to compete with upmarket porcelain figures, and the larger firms pulled out of the earthenware figure market. In fact the taste for figures at the top of the market had greatly reduced even for the porcelain companies. Instead, increasing prosperity opened new popular markets for the figures, and Staffordshire figure manufacturers went downmarket, reducing the complexity of their shapes and painting, and gradually broadening their range of subjects. At the same time Staffordshire transfer-printed tablewares of excellent quality were becoming cheaper, but this market was becoming dominated by the larger potteries, perhaps pushing smaller operations into the figure market.
They were able to greatly increase the volume of figures by appealing to this new and much larger market, and more manufacturers were active in this area. These trends of increasing production, and decreasing quality and prices, continued for most of the century. From the mid-century, or even 1840, all figures were aimed at the low end of the market, and once again few makers are identifiable. Higher quality figures were made in porcelain, and new ceramic materials like Parian ware, as well as some types of stoneware, but in the 19th century "Staffordshire figure" comes to denote specifically the cheaper earthenware types.
Staffordshire figures document, in a unique and tangible manner, a particular aspect of the social history of 19th century England. [19] Oliver describes them as important English folk art, "of the people for the people". [20]
Very similar designs frequently appear in a number of different versions, as makers copied each others' designs, and as numbers of moulds were made for popular figures.
Industrialisation, an exodus from country to town, and population increase proceeded throughout the century. [21] For the first time in modern history, working-class people had funds sufficient to buy figures if they so wished; the prices of the cheapest class of figure had dropped considerably. Manufacturers aimed to appeal to public taste, thereby leaving a physical record of the pursuits and interests of the time in a fascinating array of pottery figures.
Figures reminding townspeople of their rural past proved immensely popular, with images of idealised pleasures and pastimes. However, these pastoral images had been more popular in the 18th century, and became less important as the 19th century went on.
Domestic pets were another favourite. Queen Victoria's collection of animals and her popularity with the nation resulted in an explosion of cats, spaniels, whippets, [23] parrots and others. These were often in pairs facing each other, for the mantelpiece. Much the most popular were pairs of Staffordshire dog figurines, usually with the King Charles spaniel.
Portrait figures of the era [24] depict all the best known personalities of the period and no small number who were briefly newsworthy only to fade from memory. Especially popular were those depicting figures involved in reforms, victories at war, hero's and heroines whose activities impacted directly on working people's lives. Characters from legend and fiction were also popular.
Other figures celebrated scandals, murders, fashion, sport, and the life-transforming novelties of clean water and railways.
Theatrical, [26] and literary subjects are common.
Lions, [27] giraffes, tigers, zebras and elephants generated huge excitement, popularised by travelling menageries. Many artists could not resist the temptation to turn horses in zebras.
Religious, [28] and temperance subjects were in great demand [29] Staffordshire pottery owners included many Nonconformists, and John Wesley was the post-biblical religious figure most often depicted, with 18 versions of him and his brother from Victoria's reign alone. [30] A number of bible scenes and figures are depicted, mostly from the Old Testament, but including some New Testament ones, and sets of the Four Evangelists. Images from Catholic iconography, such as the Madonna and Child and some saints were produced, though they are not very common. Some were probably for export, at least to Ireland, and perhaps France. [31] Some 20 Nonconformist preachers, and some other leaders were given figures, with the star preacher Charles Spurgeon the most common contemporary figure, but there is a striking absence of portrait figures of Anglican clergy, though some leading Evangelical Anglican laypeople were depicted, and some Catholic clergy. [32]
Types from the late 18th century satirizing the clergy continued well into the 19th, but new types did not appear; the most popular remained Vicar and Moses, The Tithe Pig and the drunken Parson and Clerk (or Inebriation). [33]
A figurine or statuette is a small, three-dimensional sculpture that represents a human, deity or animal, or, in practice, a pair or small group of them. Figurines have been made in many media, with clay, metal, wood, glass, and today plastic or resin the most significant. Ceramic figurines not made of porcelain are called terracottas in historical contexts.
Earthenware is glazed or unglazed nonvitreous pottery that has normally been fired below 1,200 °C (2,190 °F). Basic earthenware, often called terracotta, absorbs liquids such as water. However, earthenware can be made impervious to liquids by coating it with a ceramic glaze, and is used for the great majority of modern domestic earthenware. The main other important types of pottery are porcelain, bone china, and stoneware, all fired at high enough temperatures to vitrify. End applications include tableware, decorative ware such as figurines.
Faience or faïence is the general English language term for fine tin-glazed pottery. The invention of a white pottery glaze suitable for painted decoration, by the addition of an oxide of tin to the slip of a lead glaze, was a major advance in the history of pottery. The invention seems to have been made in Iran or the Middle East before the ninth century. A kiln capable of producing temperatures exceeding 1,000 °C (1,830 °F) was required to achieve this result, the result of millennia of refined pottery-making traditions. The term is now used for a wide variety of pottery from several parts of the world, including many types of European painted wares, often produced as cheaper versions of porcelain styles.
Stoneware is a rather broad term for pottery fired at a relatively high temperature. A modern technical definition is a vitreous or semi-vitreous ceramic made primarily from stoneware clay or non-refractory fire clay. End applications include tableware, decorative ware such as figurines.
Thomas Whieldon was an English potter who played a leading role in the development of Staffordshire pottery.
Josiah Spode was an English potter and the founder of the English Spode pottery works which became famous for the high quality of its wares. He is often credited with the establishment of blue underglaze transfer printing in Staffordshire in 1781–84, and with the definition and introduction in c. 1789–91 of the improved formula for bone china which thereafter remained the standard for all English wares of this kind.
Spode is an English brand of pottery and homewares produced by the company of the same name, which is based in Stoke-on-Trent, England. Spode was founded by Josiah Spode (1733–1797) in 1770, and was responsible for perfecting two extremely important techniques that were crucial to the worldwide success of the English pottery industry in the century to follow.
The Staffordshire Potteries is the industrial area encompassing the six towns Burslem, Fenton, Hanley, Longton, Stoke and Tunstall, which is now the city of Stoke-on-Trent in Staffordshire, England. North Staffordshire became a centre of ceramic production in the early 17th century, due to the local availability of clay, salt, lead and coal.
Creamware is a cream-coloured refined earthenware with a lead glaze over a pale body, known in France as faïence fine, in the Netherlands as Engels porselein, and in Italy as terraglia inglese. It was created about 1750 by the potters of Staffordshire, England, who refined the materials and techniques of salt-glazed earthenware towards a finer, thinner, whiter body with a brilliant glassy lead glaze, which proved so ideal for domestic ware that it supplanted white salt-glaze wares by about 1780. It was popular until the 1840s.
Transfer printing is a method of decorating pottery or other materials using an engraved copper or steel plate from which a monochrome print on paper is taken which is then transferred by pressing onto the ceramic piece. Pottery decorated using the technique is known as transferware or transfer ware.
Wedgwood is an English fine china, porcelain and luxury accessories manufacturer that was founded on 1 May 1759 by the potter and entrepreneur Josiah Wedgwood and was first incorporated in 1895 as Josiah Wedgwood and Sons Ltd. It was rapidly successful and was soon one of the largest manufacturers of Staffordshire pottery, "a firm that has done more to spread the knowledge and enhance the reputation of British ceramic art than any other manufacturer", exporting across Europe as far as Russia, and to the Americas. It was especially successful at producing fine earthenware and stoneware that were accepted as equivalent in quality to porcelain but were considerably cheaper.
Royal Doulton is an English ceramic and home accessories manufacturer that was founded in 1815. Operating originally in Vauxhall, London, and later moving to Lambeth, in 1882 it opened a factory in Burslem, Stoke-on-Trent, in the centre of English pottery. From the start, the backbone of the business was a wide range of utilitarian wares, mostly stonewares, including storage jars, tankards and the like, and later extending to drain pipes, lavatories, water filters, electrical porcelain and other technical ceramics. From 1853 to 1901, its wares were marked Doulton & Co., then from 1901, when a royal warrant was given, Royal Doulton.
Mintons was a major company in Staffordshire pottery, "Europe's leading ceramic factory during the Victorian era", an independent business from 1793 to 1968. It was a leader in ceramic design, working in a number of different ceramic bodies, decorative techniques, and "a glorious pot-pourri of styles - Rococo shapes with Oriental motifs, Classical shapes with Medieval designs and Art Nouveau borders were among the many wonderful concoctions". As well as pottery vessels and sculptures, the firm was a leading manufacturer of tiles and other architectural ceramics, producing work for both the Houses of Parliament and United States Capitol.
Art pottery is a term for pottery with artistic aspirations, made in relatively small quantities, mostly between about 1870 and 1930. Typically, sets of the usual tableware items are excluded from the term; instead the objects produced are mostly decorative vessels such as vases, jugs, bowls and the like which are sold singly. The term originated in the later 19th century, and is usually used only for pottery produced from that period onwards. It tends to be used for ceramics produced in factory conditions, but in relatively small quantities, using skilled workers, with at the least close supervision by a designer or some sort of artistic director. Studio pottery is a step up, supposed to be produced in even smaller quantities, with the hands-on participation of an artist-potter, who often performs all or most of the production stages. But the use of both terms can be elastic. Ceramic art is often a much wider term, covering all pottery that comes within the scope of art history, but "ceramic artist" is often used for hands-on artist potters in studio pottery.
Ironstone china, ironstone ware or most commonly just ironstone, is a type of vitreous pottery first made in the United Kingdom in the early 19th century. It is often classed as earthenware although in appearance and properties it is similar to fine stoneware. It was developed in the 19th century by potters in Staffordshire, England, as a cheaper, mass-produced alternative for porcelain.
Staffordshire dog figurines are matching pairs of pottery spaniel dogs, standing guard, which were habitually placed on mantelpieces in 19th-century homes. Mainly manufactured in Staffordshire pottery, these earthenware figures were also made in other English counties and in Scotland. They are also known as hearth spaniels or fireplace dogs as they were positioned on top of the mantelpiece. Many other breeds were produced, particularly the greyhound, though the spaniels were especially popular and this is attributed to royalty favouring the King Charles Spaniel breed. In Scotland, they were colloquially termed Wally dugs and were manufactured in bulk at potteries in places such as Pollokshaws in Glasgow and Portobello near Edinburgh.
The Wood family was an English family of Staffordshire potters. Among its members were Ralph Wood I (1715–1772), the "miller of Burslem," his son Ralph Wood II (1748–1795), and his grandson Ralph Wood III (1774–1801). Ralph I was the brother of Aaron Wood, father of Enoch Wood. Through his mother, Ralph Wood II was related to Josiah Wedgwood.
William Greatbatch was a noted potter at Fenton, Staffordshire, from the mid-eighteenth to the beginning of the nineteenth centuries. Fenton was one of the six towns of the Staffordshire Potteries, which were joined in the early 20th century to become the city of Stoke-on-Trent in Staffordshire, England.
Enoch Wood (1759–1840) was an English potter and businessman, from one of the major families in Staffordshire pottery. Starting as a modeller, he established a successful business in Burslem in the Staffordshire Potteries, from 1790-1818 trading as Wood and Caldwell. In the 18th century they produced many Staffordshire figures, which Wood modelled himself, and other types of earthenware and stoneware. After 1818 his company, now Enoch Wood & Sons, produced large quantities of blue and white transfer-printed tableware in earthenware, much of which was exported to America.
The pew group is a rare type of pottery Staffordshire figure, apparently made only in the 1740s. Typically it has two or three "rigidly posed" figures sitting on a high-backed bench, often with a woman in the centre; great attention is paid to details of hair and clothing. The setting is not church, as the usual name suggests, but a comfortable home or inn, where high-backed settles were a common piece of furniture. Details are picked out in dark brown or black glaze, and dogs and musical instruments may be depicted, or the gentlemen may be taking snuff.