TMC Costin

Last updated

TMC Costin
Overview
ManufacturerThompson Manufacturing Company
Production1983–1987
Assembly Republic of Ireland, Castlebridge, County Wexford
Designer Frank Costin
Body and chassis
Class Sports car
Body style 2 seat (or 2+2) Targa top
Layout F/R
Platform Tubular steel space frame
Powertrain
Engine I4
Transmission 4-speed manual

The TMC Costin is a Clubman-style sports car built from 1983 to 1987 in Castlebridge, County Wexford, Republic of Ireland. [1] Fewer than forty were produced. [2]

Contents

History

The Thompsons of County Wexford, Ireland were a farming family with six sons. [3] One son, Peter Thompson, embarked on an engineering career, first as a draughtsman at agricultural engineering firm Phillip Pierce and Co. in Wexford and later with the Timoney Research Centre at Navan, where he was in charge of several projects related to the design of armoured personnel carriers. [4] [5] [6] Eventually three of the brothers were at Timoney: Val Thompson was hired as a Financial controller, and Sean Thompson as a Design technician. [6]

In March 1983 Peter, Val, and Sean, along with a fourth brother, Anthony, established a new company to build cars. [7] [6] [8] While some references call it the "Thompson Motorsport Company", most refer to the business as the "Thompson Manufacturing Company" (TMC). [7] [3] [6] [9] [10] [11] [12] [13] Financial support was provided through the Industrial Development Authority, under the terms of the Small Industries Scheme. [6] Some degree of American investment or ownership is also possible. [10] [14]

Peter asked engineer and aerodynamicist Frank Costin to design the company's first automobile. [9] [4] In addition to designing the car itself, Costin was to develop the tooling and jigs needed to build it in exchange for a 10% royalty on each car sold. [1] This design became Costin's Auto Project XXIV. [15] Conceptually, it was intended to be an improvement on the Lotus Seven. [13] [16] It was also a further development of ideas Costin had explored in his earlier Marcos Xylon. [13] It is described as the first road racing car built in Ireland. [11]

While under development, the car was called the Rushabout. [1] The original engine chosen was the 1,256 cc (76.65 cu in) straight-four engine from the Vauxhall Chevette. [1] [9]

The Thompson brothers hand-built the first car in the family barn. [7] They announced plans to open a 4,000 sq ft (370 m2) factory with a staff of eight to build the car in July 1983. [6]

The renamed TMC Costin was officially launched at the Mondello Park circuit in late 1983, [6] and sales began the following year. [1] [10] The car was available in three states of tune: GTA, GTB, and GTC,[ citation needed ] and offered in kit form or as a fully assembled automobile. [13] [1] The kit was originally priced at £2000, later rising to £6000; [11] [6] [13] [9] prices for the fully built car started at £6500 for a basic model, but eventually climbed to £13,000 with Value-added tax (VAT) and duty included. [13] [1]

TMC had ambitious plans for sales to Canada. [10] Automotive News reported that by late 1985 the company had exported five cars to the country with plans to reach annual sales of fifty cars per year in that market, [12] where the car sold for CDN$20,000.

A planned restyling of the car by Richard Oakes, designer of the Nova/Sterling kit car, did not happen. [1]

Production of the TMC Costin ran from 1983 to 1987. [17] Although TMC claimed to have built close to one hundred cars, the total number of cars produced is typically reported to have been either twenty-six or thirty-nine units. [8] [10] [9] [1] [16]

In 1988 TMC sold the rights to the chassis to Daniel (Dan) Panoz, son of Don Panoz, an American businessman who owned a pharmaceutical firm based in Ireland. The younger Panoz had applied for a job at TMC. [18] [19] Some references say that he briefly worked for TMC, while others say that the company went out of business before he could start. [20] [21] With financial backing from his father, Dan Panoz acquired the plans and jigs for the chassis, as well as parts for two complete cars, which were shipped to the United States. He also hired TMC engineers Sean Thompson and Mick Murphy. [22] [23] Panoz established Panoz Auto Development (PAD), and used the TMC Costin's chassis design as the basis of the Panoz Roadster" [1] [20]

Features

Production versions of the TMC Costin use Ford engines or derivatives. [9] The base engine was a 1,599 cc (97.6 cu in) Ford Crossflow. [17] A version with the Ford CVH engine was also offered. [13] For even more power the car could be fitted with Cosworth BDA or BDR engines. Power outputs are 84, 110, or 130 hp (63, 82, or 97 kW). [9] [8]

The space frame chassis was designed by Costin. It is noteworthy for being a union of three modules or cells: a front frame to which the engine and suspension are bolted, a triangular centre section for the driver and passenger, and a rear section to support the rear suspension and roll bar. The structure was particularly effective at increasing stiffness in the cockpit/passenger area. [10] [16] The chassis was designed for an engine output in the vicinity of 300 hp (223.7 kW). With a 100% design safety margin, the structure is theoretically capable of managing up to 600 hp (447.4 kW). [13] [5]

The front windscreen is a bespoke item made by Pilkington exclusively for TMC. [24] The car's doors are hinged on the A pillars and pivot up and forward when opened. The large triangular B-pillar and roof hoop enclose the rollbar, and the roof is a Targa top with a removable centre section. A glass rear hatch cover was standard. [9] Unusually for cars of this class, there is 16.5 cu ft (467 L) of luggage space behind the driver and passenger, which can also accommodate two rear-facing seats. [13] The bodywork is made of glass-reinforced plastic (GRP), aluminium, and Kevlar panels. [9] [25]

The front suspension consists of adjustable equal-length upper and lower wishbones, coil springs and telescopic dampers. [10] [24] [13] The rear suspension locates a live rear axle and comprises double radius arms and a Panhard rod. [10] The axle is an Atlas unit from a Ford Capri. Front brakes are Girling discs, while the rear brakes are drums. [13]

Technical data

TMC Costin 1600:
Engine: Front-mounted Ford Crossflow inline four engine
Displacement:1,599 cc (97.6 cu in)
Bore × Stroke:81.0 mm × 77.6 mm (3.19 in × 3.06 in)
Maximum power:82 hp (61.1 kW) at 5500 rpm
Maximum torque:91 ft⋅lb (123.4 N⋅m) at 2800 rpm
Compression ratio:9.0:1
Valvetrain: Single cam-in-block, pushrods, rocker arms. 2 overhead valves per cylinder.
Induction:  Naturally aspirated, single Weber DATR carburettor
Cooling:  Water
Transmission: 4-speed manual
Steering:  Rack and pinion
Brakes f/r:Disc/drum
Suspension front:Upper and lower wishbones, coil springs, telescopic dampers
Suspension rear: Live axle, parallel radius arms, Panhard rod.
Body/Chassis: Glass reinforced plastic (GRP) and Kevlar body, tubular steel space frame chassis
Track f/r:1,400 / 1,400 mm (55.1 / 55.1 in)
Weight distribution % f/r:50/50
Wheelbase:2,390 mm (94.1 in)
Final drive ratio:3.75:1
Tires f/r:185/50 HR 13 / 185/50 HR 13
Length
Width
Height:		3,580 mm (140.9 in)
1,520 mm (59.8 in)
1,100 mm (43.3 in)
Weight:658 kg (1,450.6 lb)

Motorsports

The TMC Costin is credited with some notable racing success. [9] It took pole position in its debut race at Mondello Park in 1983. This prompted Peter Thompson to ask "What is 'pole'?". [7] Driven by John Keaney, the car won on its first outing. [13]

Val Thompson has personally raced a TMC Costin in vintage events.

Related Research Articles

<span class="mw-page-title-main">Locost</span>

A Locost is a home-built car inspired by the Lotus Seven. The car features a space frame chassis usually welded together from mild steel 1 in × 1 in square tubing. Front suspension is usually double wishbone with coil spring struts. The rear is traditionally live axle, but has many variants including independent rear suspension or De Dion tube. Body panels are usually fiberglass nose and wings and aluminium side panels. Each car is highly individualized according to the resources, needs and desires of each respective builder.

<span class="mw-page-title-main">Marcos Engineering</span> British sports car manufacturer

Marcos Engineering was a British sports car manufacturer. The name derives from the surnames of founders Jem Marsh and Frank Costin.

<span class="mw-page-title-main">Roadster (automobile)</span> Open two-seat car

A roadster is an open two-seat car with emphasis on sporting appearance or character. Initially an American term for a two-seat car with no weather protection, usage has spread internationally and has evolved to include two-seat convertibles.

<span class="mw-page-title-main">Panoz</span> American sports car manufacturer

Panoz is an American manufacturer of sports automobiles founded in 1989 as Panoz Auto Development by Dan Panoz, son of Don Panoz. Panoz products have included the Panoz Roadster and AIV Roadster, the Panoz Esperante, and the Panoz Avezzano.

<span class="mw-page-title-main">Ginetta Cars</span> British automobile manufacturer

Ginetta Cars Limited is a British specialist builder of racing and sports cars based in Garforth, Leeds, West Yorkshire.

<span class="mw-page-title-main">Intermeccanica</span>

Intermeccanica is an automobile manufacturer, founded in Torino, Italy, in 1959 by Frank Reisner. It subsequently moved first to the United States, then to Canada, and is currently headed by Frank's son, Henry Reisner.

<span class="mw-page-title-main">Panoz Roadster</span> Motor vehicle

The Panoz Roadster is a sports car launched in 1992 by the American manufacturer Panoz Auto Development Company of Georgia. The Roadster was succeeded by the AIV Roadster in 1997. They were built using aluminum, similar to that of the Plymouth Prowler first sold several years later in 1997. The Panoz Roadster was the first American-built aluminum intensive vehicle.

The Costin Sports Roadster is a lightweight mid-engined sports car that was intended for initial launch in the mid-1990s. A prototype test bed chassis was finished in 1991 at Costin Ltd in Wales.

Sylva Autokits is a kit car manufacturer based in Lincolnshire, England. Sylva was founded in 1981 by Jeremy Phillips and has developed and produced a number of small and lightweight sports cars. Sylva cars have won a number of 750 Motor Club Kit Car championships.

The Costin Amigo is a lightweight sports car built in the United Kingdom from 1970 to 1972. The Amigo was designed by Frank Costin and built by Costin Automotive Racing Products Ltd. The car's chassis was made of wood and plywood.

Factory Five Racing, Inc. (F.F.R.) is an American automobile company that designs and manufactures assembly kits, chassis, bodies and related components for replicars and sports cars.

Fiberfab was an American automotive manufacturer established in 1964. Starting with accessories and body parts, they progressed to making kit cars and fully assembled automobiles. They became one of the longest lasting kit car manufacturers.

<span class="mw-page-title-main">Élan Motorsport Technologies</span>

Élan Motorsport Technologies is an American enterprise that serves as an umbrella company containing the race car engineering, development and manufacturing companies owned by American racing and automotive company conglomerate Panoz Motor Sports Group. Élan engineers, designs and builds Panoz-branded race cars and components, since its founding it has also acquired several manufacturers, including famous Formula Ford builders Van Diemen and IndyCar Series constructor G-Force. Élan-built cars have successfully competed in the American Le Mans Series, Le Mans Series, IMSA Prototype Lites and various other championships, racing series and types of professional racing throughout the world. It designs, develops and manufactures full line race cars, i.e. chassis, bodies, components and engines for professional racing competition for a variety of segments and classes.

<span class="mw-page-title-main">Lotus Mark VIII</span>

The Lotus Mark VIII car was Colin Chapman’s first fully enclosed aerodynamic design. Chapman's basic requirements for the design were for a car of 1100 lbs powered by an 85 bhp engine and a maximum speed of 125 mph. Work began on this design in late 1953 and Chapman was assisted in the design of the body by the aerodynamicist Frank Costin, who was the brother of Mike Costin, his main collaborator.

<span class="mw-page-title-main">Panoz LMP-1 Roadster-S</span>

The Panoz LMP-1 Roadster-S was a Le Mans Prototype built for Panoz in 1999. The car was a successor to the Esperante GTR-1 which had competed in the Grand Tourer categories internationally. Following competition in the American Le Mans Series and at the 24 Hours of Le Mans until 2001, the car was replaced by the Panoz LMP07.

The Panoz LMP07 was a Le Mans prototype built in late 2000 for Panoz for competition in the American Le Mans Series. The car was designed as a successor to the Panoz LMP-1 Roadster-S which had competed since 1999. Although retaining the unusual format of having the engine in front of the cockpit, the LMP07 was quickly found to be lacking the capabilities of its predecessor, forcing Panoz to abandon it and return to the LMP-1 Roadster-S. The LMP07 would survive in the hands of privateers until 2003.

<span class="mw-page-title-main">Blakely Bernardi</span> Motor vehicle

The Blakely Bernardi is an automobile produced in the 1980s by Blakely Auto Works of Princeton, Wisconsin, USA. Blakely produced a number of automobile models, including the Bearcat and Bantam. This model is named after Enrico Bernardi, Italian inventor of the gasoline internal-combustion engine and automobile pioneer. The Bernardi was available as a completed car or as a kit of parts to be assembled by the buyer.

<span class="mw-page-title-main">Haynes Roadster</span> Motor vehicle

Haynes Roadster is a replica of Lotus Seven home-built according to a book Build Your Own Sports Car: On a Budget by Chris Gibbs (ISBN 1-84425-391-0). Ford Sierra is used in the car as a donor for drivetrain and suspension components.

The automotive industry in Ireland has had a varied history and despite the small size of the island, the punitive tax on imported cars encouraged a wide range of companies to assemble their cars locally including Fiat, Ford and Renault. From Ireland's entry to the European Union in 1973, the need for locally produced cars to avoid import taxes reduced and since the 1980s, production ended and all cars are now imported.

<span class="mw-page-title-main">Kit and replica cars of New Zealand</span>

New Zealand had a long history of small garages and vehicle enthusiasts modifying and creating sports and sports racing cars. Out of these interests grew the New Zealand kit and replica car industry with the introduction of fibre-glass car bodies in the 1950s.

References

  1. 1 2 3 4 5 6 7 8 9 10 Heseltine, Richard (24 May 2018). "Frank Costin: reluctant hero behind the greatest sports cars". auto classics.
  2. ↑ "Many Cars Are Green, but Only a Few Can Be Called Irish". New York Times. 18 March 2014. Retrieved 10 January 2019.
  3. 1 2 "Growing with Merit". TrackRecord. 29 September 2014. pp. 58–63.
  4. 1 2 Thompson, Peter. "Peter Thompson — About Peter Thompson".
  5. 1 2 "Wexford boy goes east". The Irish Times. 22 September 2004.
  6. 1 2 3 4 5 6 7 8 "Sports car plant to open in Castlebridge July 1983". Wexford People. July 1983.
  7. 1 2 3 4 Thompson, Peter (2012). "Forward". Asian Karting News.
  8. 1 2 3 Kjellström, PeO (21 January 1987). "Irlands svarta får" [Ireland's black sheep]. Teknikens Värld (in Swedish). Stockholm, Sweden: Specialtidningsförlaget AB. 39 (3): 14.
  9. 1 2 3 4 5 6 7 8 9 10 Georgano, Nick, ed. (2001). "T.M.C. (IRE)". The Beaulieu Encyclopedia of the Automobile — P–Z. Vol. 3 (2nd ed.). Chicago, Illinois: Fitzroy Dearborn Publishers. p. 1594. ISBN   1-57958-293-1.
  10. 1 2 3 4 5 6 7 8 Lawrence, Mike (7 October 1996). "TMC Costin (IRL)". A to Z of Sports Cars, 1945-1990. Motorbooks. p. 297. ISBN   978-1870979818.
  11. 1 2 3 Pate, David (25 August 1983). "TMC Costin Car 1983". RTÉ Archives.
  12. 1 2 McKeen, Scott (6 December 1985). "Drunk-driving lesson sparks cab fare credit car idea". Edmonton Journal. p. 37.
  13. 1 2 3 4 5 6 7 8 9 10 11 12 Lawrence, Mike (August 1984). "TMC Costin — a return to a theme". Motor Sport. p. 31.
  14. ↑ Pedley, Nigel (September 2017). "eBay Watch" (PDF). The NSCC. No. 426. National Scalextric Collectors Club. pp. 35–41.
  15. ↑ Lawrence, Mike (September 1984). "The Cars of Frank Costin". Motor Sport. pp. 35–40.
  16. 1 2 3 Fitzgerald, Craig (17 March 2015). "Drivin' O' the Green: 4 Cars Built in Ireland". BestRide.com.
  17. 1 2 McCullagh, Robin (March–May 2018). "The Irish Automobile Industry" (PDF). IVVCC News. Irish Veteran & Vintage Car Club. pp. 26–27.
  18. ↑ Burke, Roisin (8 May 2011). "Dan Panoz". Independent.ie.
  19. ↑ Ernst, Kurt (16 April 2014). "Boutique American sports car builder Panoz marks its first quarter century". Hemmings.
  20. 1 2 "Marque Time". Irish Times. 12 May 2004. Retrieved 10 January 2019.
  21. ↑ Ross, Robert (1 November 2014). "Panoz Has Legs". Robb Report.
  22. ↑ Smith, Lucy (24 November 2017). "The Panoz Roadster and How It Came Into Existence". Panoz.
  23. ↑ Thomas, Phillip (8 August 2020). "5 Chapters from the Life of Don Panoz, Automotive Titan". IMSA.
  24. 1 2 "TMC Costin: Aufbau" [Construction] (in German). Archived from the original on 8 May 2010.
  25. ↑ von Rotz, Bruno (17 February 2019). "Rinspeed SC-R — irisch-amerikanisch-schweizerischer Roadster" [Rinspeed SC-R — Irish-American-Swiss roadster]. zwischengas.com (in German).

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.