The TRS-80 Model II is a computer system launched by Tandy in October 1979, and targeted at the small-business market. It is not an upgrade of the original TRS-80 Model I, but a new system.
The Model II was succeeded by the compatible TRS-80 Model 12, Model 16, Model 16B, and the Tandy 6000.
Model II
Background
Tandy was surprised at the strong demand for the TRS-80 Model I from business purchasers. The computer was too limited for such use, so the company began development on the Model II in late 1978. It was announced in May 1979, deliveries began in October,[4] and only Tandy-owned Radio Shack stores sold the computer.[5] Tandy advertised the Model II as "a business computer — not a hobby, 'home' or personal computer". It claimed that the computer was "ideal for a small business, and also 'just right' for many time-consuming jobs within larger businesses", including those with mainframes or minicomputers. The base single disk version was US$3,450, and a four disk version was US$6,599.[6]
Hardware
As a professional business machine, the Model II used state-of-the-art hardware and had numerous features not found in the primitive Model I such as the high-speed (for the time) 4MHz Z80A, DMA, vectored interrupts, a detachable keyboard with two function keys and numeric keypad, and port instead of memory-mapped I/O. It sported 80x25 text and a single-sided 500 KB 8" floppy drive, and either 32 or 64 KB of RAM, along with two RS-232 ports and a Centronics-standard parallel port. The video memory could be banked out of Z80 memory, so that the entire 64 KB address space could be used for main memory. Unlike most computers, it had no BIOSROM except a small boot loader (the BIOS was loaded off the boot floppy). Because of this and the use of port I/O, almost all of the Model II's memory could be used by software. The Model II ran the TRSDOS operating system (renamed to TRSDOS-II starting with version 4.0) and BASIC. The different disk format and system architecture made it impossible to run Model I/III software on the Model II, thus it never had as much available. This was somewhat mitigated by the availability of the CP/M operating system for the Model II from third parties such as Pickles & Trout. Unlike the Model I/III, the Model II's memory map is compatible with standard CP/M-80. Three internal expansion slots could be used for add-on cards such as additional serial ports and a video board that allowed bitmap graphics.
The floppy drive included with the Model II was a Shugart SA-800 full-height, single-sided 8" drive; like most such drives, it spun continuously whether the disk was being accessed or not and the spindle motor was powered directly off the A/C line. The floppy controller in the Model II was a double-density, soft-sector unit based on the WD 1791 floppy controller. Like with the Model I/III/IV, boot disks on the Model II required Track 0 to be single density. CDC drives were used for the floppy expansion module.
The keyboard was a capacitive keyboard made by Keytronic Corporation. Like most capacitive keyboards, it utilized a key mechanism with foam rubber disks; these are prone to dry-rotting with age and requiring replacement. A later version of the keyboard was made by Cherry Corporation, but still used the capacitive technology rather than the more well-known Cherry mechanical keyswitches.
The disk format on the Model II closely followed the IBM 3740 standard, which specified 77 tracks, 26 sectors per track, soft sector formatting, and a sector size of 128 bytes for a formatted capacity of about 250 KB, however the Model II had a double density controller, so the disk format used 256 byte sectors and formatted capacity was about 492 KB. If users installed a double-sided drive, they could get 1 MB of space, however this required a modified DOS and Radio Shack did not officially support the use of double-sided drives on the Model II.
There were several hardware revisions to the Model II over its lifespan. The first revision models (1979–80) could not boot from a hard disk and the floppy controller required a terminating resistor pack for the last drive on the chain in place of the standard method of putting a terminating resistor pack on the internal disk drives. The external resistor pack worked by looping back the I/O lines on the external floppy connector to the SA-800 drive's terminator pins. This unusual setup was chosen so the users would not have to remove the cover and install or remove a terminating resistor pack on the floppy drive every time they wanted to remove or attach external disk drives. It proved to be problematic since customers who lost their resistor packs could not use their machines (Radio Shack sold replacement packs for $50) and Model IIs sold from 1981 onward used a different floppy controller that did not require it. Hard disks offered for the Model II also used a terminating resistor pack. These were sold as master and slave drives, with the master hard disk (which had the resistor pack) needing to be the last one on the chain. Like most hard disks offered on 8-bit computers, there was no subdirectory support and the drive was simply treated by the OS as a giant and speedy floppy disk.
Unlike the Model I/III, the Model II also had a case fan due to the heat generated by the 8" floppy drive's continuously running spindle motor. The combined effect of the case fan and the floppy motor resulted in an extremely noisy computer compared to the nearly silent Model I/III.
The video display in the Model II is similar to the Model I. A 12" B&W television CRT is used; the monitors were supplied by RCA and Motorola. However, the Model II's video circuitry was significantly improved in the interest of better picture quality, as one of the criticisms of the Model I was that the included monitor was merely an RCA television set with the RF, IF, and sound stripped out. The Model II, in contrast, used a dedicated monochrome composite monitor with higher-quality and better-adjusted components than the modified TV set provided with the Model I. The text display on the Model II was 80x24 rather than the Model I/III's 64x16 text and also added lowercase letters, one major feature that the Model I was lacking (originally; an upgrade was available later). In addition, it could be operated in 40x24 text mode. The character set in the Model II was somewhat different from the Model I/III. It included several mathematics and currency symbols and in place of the Model I/III's semigraphics characters had 30 characters (ASCII codes 128-158) for drawing lines and boxes. Reverse video characters were not available.
The Model II was similar to an S-100 machine in that it featured a passive backplane with eight expansion slots; four of these were normally occupied by the CPU card, floppy controller, keyboard/video card, and RAM. A separate PCB in the back of the machine contained two RS-232 ports and a Centronics port. Although the expansion slots look similar to an S-100 slot, they were a proprietary design and could not be used with S-100 boards.
Various expansion cards for the remaining four slots included a hard disk controller, network interface controller, a 68000 CPU board that could address up to 256 KB memory, and a board for pixel-addressable graphics with 640 by 240 resolution. It could overlay the text screen with the bitmapped display. The same graphics board (catalog number 26-4104) could be fitted to the later Models 12 and 16. It came with a modified BASIC providing rudimentary screen drawing capabilities like line, box and circle drawing, shading and filling, a viewport capability and array transfer between graphics RAM and CPU RAM.[7]
The Model II architecture theoretically supported up to 512K RAM via a bank-switchable upper 32K page segment (up to fifteen 32K pages were supported).[8] However, the machine did not provide enough card slots to physically upgrade the RAM to 512K. This was because RAM was provided via 32K or 64K cards and only a few open card slots were available on a standard Model II, since the basic configuration of the machine took up four slots. This deficiency was rectified with the Model 12, which could accommodate up to 768 KB RAM using the newer 4164 DRAM chips and a revised bank-switching scheme.
A special-purpose expansion card was the 64K Memory Expansion Board (catalog number 26-4105) which allowed the Model II (without the expensive Model 16 upgrade) to run a special version of the Visicalc spreadsheet called Enhanced Visicalc. This made available larger worksheets by using banked memory beyond the Z80's base 64 KB.[9]
Some of the technical advances first introduced on the Model II such as the WD 1791 floppy controller and the improved video circuitry would later go into the Model III.
Despite being designed primarily for business or operating factory equipment, the Model II did have a handful of games available; notably the Scott AdamsAdventure series were offered for it. In addition, CP/M versions of Infocom text adventures would run.
Tandy offered a desk custom-designed for the Model II for US$370. It could hold an additional three 8″ disk drives or up to four 8.4MB hard drives (the Model II allowed three external floppy drives to be daisy-chained to it). In 1981, the 64K Model II computer was $3,350 and the "primary unit" 8.4MB hard disk another $4,040 by mail-order from Radio Shack's dealer in Perry, Michigan; MSRP in the company's own stores was higher.[10]
BASIC interpreter
The Model II was provided with an implementation of Microsoft BASIC closely derived from Level II BASIC on the Model I/III, but with a number of differences and enhanced features. Unlike the Model I/III, the Model II's BASIC was entirely RAM-resident and loaded from disk. It was 17k in size, approximately the same size as Model I/III Disk BASIC.
While Model I/III BASIC include a startup prompt asking if the user would like to reduce BASIC's memory area (typically done if some memory is to be reserved for machine language routines), Model II BASIC instead has this feature as a command line option (M:address) when started from the TRS-DOS prompt. If the user is planning to run a BASIC program that performs file handling, it is also required to specify the number of open files at startup via the F:files option. A BASIC program may also be specified at startup for automatic loading and execution.
In Model I/III BASIC, the text cursor is positioned via the statement PRINT@,(position) which refers to an absolute coordinate on the screen. Model II BASIC instead accepts a row and column position (thus PRINT@,(2,20) instead of PRINT@,125). Model II BASIC supplies the functions HEX$ and OCT$ for converting decimal values, and also added support for integer division and the modulo operator. Model II BASIC still limits variable names to two characters as support for long variable names in Microsoft BASIC did not appear until BASIC-80 5.x in 1981. BASIC programs may be saved in ASCII in addition to tokenized format. The ERASE command is used to clear all array variables.
Model II BASIC operates in one of two display modes depending on the last character displayed. In Scroll Mode (invoked if the last character displayed had an ASCII value from 32-127), text will scroll off the screen when the bottom is reached or wrap around to the next line on the left when the right side of the screen is reached. In Graphics Mode (ASCII value from 128-159), BASIC wraps the screen around when the bottom row or rightmost column is reached.
As with all pre-v5.x implementations of BASIC-80, Model II BASIC does not reserve string space automatically and the CLEAR statement must be used at the start of a program to reserve it.
The SYSTEM command, used to exit BASIC, may also be used to "pass" a command to TRS-DOS without exiting and losing the program currently in memory; this is most commonly done for tasks such as viewing the disk directory.
Missing from Model II BASIC are the SET and PSET commands for setting block characters, cassette functions, the CMD statement, and the PEEK, POKE, INP, and OUTP statements, making it less hacker-friendly than Model I/III BASIC. It was possible to regain most of this functionality by using the extremely similar MBASIC provided with CP/M. The MEM command, used in Model I/III BASIC to display the amount of free BASIC memory, was removed and its functionality merged into the FRE function.
Other programming languages
Microsoft made available its Fortran, Cobol and BASIC compilers, as well as its MACRO-80 assembler.[11] All were sold through Radio Shack. Later the simpler, more affordable Series I editor/assembler package from Radio Shack itself, familiar to many Model I hobbyists, was offered for the Model II. Radio Shack also had its own macro assembler product, Assembly Language Development System, or popularly known as ALDS. This product was later reworked and sold for the Model 4.[12]
Applications software
Wayne Green estimated that sales of the Model II as of August1982[update] were about 10% of the Model I, discouraging third-party developers from creating software for the more expensive computer; the small software library, in turn, discouraged sales of the Model II. He described Tandy's software support for the Model II as "less than dynamic", because of the company's focus on the Model III.[13] Tandy produced and marketed various Model II business applications ranging from accounting, medical office, legal office, payroll, inventory, order entry, and sales analysis, to general-purpose applications for word processing, database management, and later spreadsheet work. Some were produced in-house (like the Scripsit word processor), others licensed and branded as Radio Shack products (like the Profile database), and still others marketed by Radio Shack, such as VisiCalc.[14] The company also offered products facilitating data transfer with IBM mainframe computers.[15]
Model 12
The Model II was replaced in 1982 by the TRS-80 Model 12, which has half-height ("thinline") double-sided floppy drives, and integrates most of the Model II electronics into a single main board.[16][17] The video and keyboard card plugged into a single slot in the main board. An expansion card cage was available as an option, allowing six more plug-in cards. The white phosphor CRT on the Model II was replaced with a green phosphor tube on the Model 12 for easier viewing and less eye strain. Its keyboard sported eight function keys.[18] The Model 12 is essentially a Model 16B without the Motorola processor, and is upgradable to a Model 16B.
The Model 12 moved the Centronics and serial ports to a cluster on the rear left side of the computer.
Model 16
The TRS-80 Model 16 came out in February 1982[19] as the follow-on to the Model II; an upgrade kit was available for Model II systems. The Model 16 added a 6MHz, 16/32-bit Motorola 68000 processor and memory card, keeping the original Z80 as an I/O processor, or as the main processor when 8-bit Model II software was loaded. It has two half-height ("thinline") double-sided 8-inch floppy drives, though the Model II upgrade does not replace the floppy drive. The Model 16 can run either TRSDOS-16 or TRS-Xenix, a variant of Xenix, Microsoft's version of UNIX. TRSDOS-16 is a TRSDOS II-4.1 application providing a 68000 interface and support for up to three users, with no additional features and little compatible software. 68000 functionality was added as an extension, loading 68000 code into the 68000 memory via a shared memory window with the Z80.[20][19]
Why is a Model 16 like a bowling ball?
Because you can get the same amount of software for each!
At a price of US$4,999(equivalent to $15,780 in 2023), the Model 16 sold poorly. By June 1982 the company had shipped 2,000 units to stores, with the majority unsold. Five months after its introduction, the computer still had no TRSDOS-16 applications; owners had to run Model II or CP/M software and applications.[20] Its release forced the few developers of Model II software to "start all over again", Green said, because customers would not want to run Z80 software on the Model 16.[13] Tandy admitted that it should have encouraged third-party software development, which resulted in the killer app VisiCalc for the Apple II.[22] In 1983, VisiCorp produced an update of Visicalc which Tandy sold for the Model 16 called Enhanced VisiCalc. This version runs on the Z80 and uses banked memory beyond the base 64 KB for larger worksheets.[23]
Rumors stated that Tandy would offer Xenix or another third-party operating system for the computer.[22][21] In early 1983 the company indeed switched to Xenix, and offered it for free to existing customers;[19] by mid-1983 an estimated 5,000 of 30,000 Model 16s ran Xenix.[24] Xenix was based on UNIX System III, also supported up to three users, and was more established.[25]
With Xenix, the Model 16 family became a popular system for small business, with a relatively large library of business and office automation software. Tandy offered multi-user word processing (Scripsit 16),[26] spreadsheet (Multiplan), and a 3GL "database" (Profile 16, later upgraded to filePro 16+), as well as an accounting suite with optional COBOL source for customization. RM-COBOL, BASIC, and C were available for programming, with Unify and Informix offered as relational databases. A kernel modification kit was also available.
TRS-Xenix was notable for being a master/slave implementation, with all I/O being performed by the Z80 while all processing was done within the otherwise I/O-free 68000 subsystem.
Model 16B and Tandy 6000
The Model 16 evolved into the TRS-80 Model 16B with 256 KB in July 1983,[27] and later in 1985, the Tandy 6000, gaining an internal hard drive along the way and switching to an 8MHz 68000. Tandy offered 8.4 MB, 15 MB, 35 MB, and 70 MB external hard drives, up to 768 KB of RAM, and up to six additional RS-232 serial ports supporting multi-user terminals. An expansion board with 512 KB memory was offered for the 6000, raising the maximum total RAM to one megabyte.[28] Additional memory and serial port expansion options were available from aftermarket companies.
The Model 6000 was referred to simply as the Tandy 6000 due to a marketing decision to move away from the Radio Shack and TRS-80 badges.
The 16B was the most popular Unix computer in 1984, with almost 40,000 units sold.[29] In 1987, Tandy announced that the 6000 hardware would no longer be improved; customers believed that their systems had become orphaned technology.[30] By 1988, Radio Shack had begun offering IBM-compatible386 PCs for their professional line and finally retired the Model II family.
Reception
InfoWorld in 1981 called the Model II "a well-designed, capable business system" that "overcomes several limitations of the Model I".[1]Creative Computing in 1984 called it a "state-of-the-art business machine" that "might have taken the business market by storm had it not had a nameplate reading 'Radio Shack.'"[2]
BYTE's review in January 1984 stated that "the Model 16B is a fairly well-implemented and apparently well-supported Xenix system" that would likely receive much support from software developers. The authors said that it greatly improved on the Model I and III, and surprised them by being a very good small Unix development system. While criticizing Xenix's user unfriendliness for small business customers, and wondering "whether Radio Shack can or will invest" in training on the very sophisticated operating system for its dealers, they concluded that the Model 16B "deserves serious consideration".[31] The magazine in August 1984 described the 16B as "a usable multiuser microcomputer system", but with a slow hard drive that might limit the computer to two users.[32]
Related Research Articles
The Aster CT-80 is a 1982 personal computer developed by the small Dutch company MCP, was sold in its first incarnation as a kit for hobbyists. Later it was sold ready to use. It consisted of several Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration. It was the first commercially available Dutch personal/home computer. The Aster computer could use the software written for the popular Tandy TRS-80 computer while fixing many of the problems of that computer, but it could also run CP/M software, with a large amount of free memory Transient Program Area, (TPA) and a full 80×25 display, and it could be used as a Videotext terminal. Although the Aster was a clone of the TRS-80 Model I it was in fact more compatible with the TRS-80 Model III and ran all the software of these systems including games. It also had a built-in speaker which was compatible with such games software.
The TRS-80 Micro Computer System is a desktop microcomputer launched in 1977 and sold by Tandy Corporation through their Radio Shack stores. The name is an abbreviation of Tandy Radio Shack, Z80 [microprocessor]. It is one of the earliest mass-produced and mass-marketed retail home computers.
The RadioShack TRS-80 Color Computer, later marketed as the Tandy Color Computer, is a series of home computers developed and sold by Tandy Corporation. Despite sharing a name with the earlier TRS-80, the Color Computer is a completely different system and a radical departure in design based on the Motorola 6809E processor rather than the Zilog Z80 of earlier models.
VisiCalc is the first spreadsheet computer program for personal computers, originally released for the Apple II by VisiCorp on October 17, 1979. It is considered the killer application for the Apple II, turning the microcomputer from a hobby for computer enthusiasts into a serious business tool, and then prompting IBM to introduce the IBM PC two years later. More than 700,000 copies were sold in six years, and up to 1 million copies over its history.
The Tandy 1000 is the first in a line of IBM PC compatible home computer systems produced by the Tandy Corporation for sale in its Radio Shack and Radio Shack Computer Center chains of stores. Introduced in 1984, the product line was aimed at providing affordable but capable systems for home computing or education, with some of its Tandy specific features like graphics, sound and joystick port making it more appealing for home use.
Multiprocessing is the use of two or more central processing units (CPUs) within a single computer system. The term also refers to the ability of a system to support more than one processor or the ability to allocate tasks between them. There are many variations on this basic theme, and the definition of multiprocessing can vary with context, mostly as a function of how CPUs are defined.
Microsoft BASIC is the foundation software product of the Microsoft company and evolved into a line of BASIC interpreters and compiler(s) adapted for many different microcomputers. It first appeared in 1975 as Altair BASIC, which was the first version of BASIC published by Microsoft as well as the first high-level programming language available for the Altair 8800 microcomputer.
The Tandy 2000 is a personal computer introduced by Radio Shack in September 1983 based on the 8 MHz Intel 80186 microprocessor running MS-DOS. By comparison, the IBM PC XT used the older 4.77 MHz Intel 8088 processor, and the IBM PC/AT would later use the newer 6 MHz Intel 80286. Due to the 16-bit data bus and more efficient instruction decoding of the 80186, the Tandy 2000 ran significantly faster than other PC compatibles, and slightly faster than the PC AT. The Tandy 2000 was the company's first computer built around an Intel x86 series microprocessor; previous models used the Zilog Z80 and Motorola 6809 CPUs.
TRSDOS is the operating system for the Tandy TRS-80 line of eight-bit Zilog Z80 microcomputers that were sold through Radio Shack from 1977 through 1991. Tandy's manuals recommended that it be pronounced triss-doss. TRSDOS should not be confused with Tandy DOS, a version of MS-DOS licensed from Microsoft for Tandy's x86 line of personal computers (PCs).
The TRS-80 Model 100 is a notebook-sized portable computer introduced in April 1983. It was the first commercially successful notebook computer, as well as one of the first notebook computers ever released. It features a keyboard and liquid-crystal display, in a battery-powered package roughly the size and shape of a notepad or large book. The 224-page, spiral-bound User Manual is nearly the same size as the computer itself.
The EACA EG2000 Colour Genie was a computer produced by Hong Kong-based manufacturer EACA, and introduced in Germany in August 1982 by Trommeschläger Computer Service and Schmidtke Electronic.
Video Genie is a discontinued series of computers produced by Hong Kong-based manufacturer EACA during the early 1980s. Computers from the Video Genie line are mostly compatible with the Tandy TRS-80 Model I computers and can be considered a clone, although there are hardware and software differences.
Scripsit is a word processing application written for the Radio Shack TRS-80 line of computers. Versions were available for most if not all computers sold under the TRS-80 name, including the TRS-80 Color Computer and several pocket computer designs, as well as the Tandy version of the Xenix operating system. Tandy Corp. also produced a version running under MS-DOS for its line of PC compatible computers. Some of the 8-bit versions are tape-based and have no ability to read or write to disk.
The Tandy 10 Business Computer System was a short-lived product developed by Radio Shack in the late 1970s as a business-oriented complement to their TRS-80 Model I desktop computer. Released in 1978, the Tandy 10 was built for Radio Shack by Applied Digital Data Systems (ADDS), and was only sold by Radio Shack's dedicated computer center stores.
NewDos/80 is a third-party operating system for the Radio Shack TRS-80 line of microcomputers released in 1980. NewDos/80 was developed by Apparat, Inc., of Denver, Colorado. NewDos/80 version 2.0 was released in August 1981. It ran on the TRS-80 Model I and Model III.
Mera–Elzab Meritum – a family of Polish personal computers based on TRS-80 Model I with BASIC Level II. Manufactured in the 1980s by Mera–Elzab in cooperation with ITM company.
The TRS-80 Model 4 is the last Z80-based home computer family by Radio Shack, sold from April 1983 through late 1991.
Home computers were a class of microcomputers that entered the market in 1977 and became common during the 1980s. They were marketed to consumers as affordable and accessible computers that, for the first time, were intended for the use of a single, non-technical user. These computers were a distinct market segment that typically cost much less than business, scientific, or engineering-oriented computers of the time, such as those running CP/M or the IBM PC, and were generally less powerful in terms of memory and expandability. However, a home computer often had better graphics and sound than contemporary business computers. Their most common uses were word processing, playing video games, and programming.
The Tandy 3000 is a personal computer introduced by Radio Shack in 1986 based on the 16-bit 8 MHz Intel 80286 microprocessor.
↑ Kilobaud Microcomputing (magazine), November 1981, page 57, "TRS-80 Discount", Perry Oil & Gas Incorporated 137 North Main St. Perry MI 48872 (advertisement).
↑ David Needle, ed. (April 9, 1984). "Radio Shack release multiuser software". InfoWorld. Vol.6, no.15. p.11. ...released two multiuser software packages for its powerful Model 16 microcomputer system....and Scripsit word-processing programs...The Model 16 can accommodate up to six users...
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
