Tom Ritchey (born 1956) is an American bicycle frame builder, Category 1 racer, fabricator, designer, and founder of Ritchey Design.[1] Ritchey is a US pioneer [citation needed] in modern frame building and the first production mountain bike builder/manufacturer in the history of the sport. He is an innovator of bicycle components that have been used in winning some of the biggest cycling competitions in the world including the UCI World Championships, the Tour de France and the Olympics. In 1988, Ritchey was inducted into the inaugural Mountain Bike Hall of Fame in Crested Butte, Colorado (now located in Fairfax, California): and 2012, inducted to the United States Bicycle Hall of Fame in Davis, California.
Tom Ritchey moved to Menlo Park, California, from Cherry Hill, New Jersey, in 1963, when his father was hired as an engineer at Ampex Corporation, an electronics company located in Redwood City, California, pioneered the magnetic tape recorder. Ritchey attributes his interest in bicycles to his father's interest in cycling, as his father found cycling as a means to get to work and fell in love with the sport himself.
At age 11, Ritchey's father taught Tom Jr. to build his wheels and repair tubular tires. Ritchey started a small business repairing tires to earn money to buy his first road bike, a Raleigh Super Course. When he was 14, Ritchey joined the Belmont Bicycle Club (BBC) and began racing. Shortly after this, he upgraded his bike to a frame he repaired himself, a broken Cinelli "B." His father taught him how to braze around this time, and he started repairing bicycle frames for local racers.
After learning to repair/replace other builders' damaged tubes, Ritchey built his first racing frame. He decided to build his frame out of a necessity for an affordable, lighter, faster bike. He bought the tube set and lugs from local builder Hugh Enox at the time for $21, and in 1972 built his first frame, which he raced on that year. He won many junior races and titles on this very frame, and eventually, on future bikes he built, he won the Senior Prestige Road trophy and the BAR (Best All-Around Rider) in 1973 and 1974 as a Junior. These feats led to Ritchey being known as the "Senior Slayer", having beaten top Californians (many of whom considered to be some of the best riders in the U.S. at the time) and former Olympians.
Tom rode for Team USA's Junior Worlds road racing squad, and then a stint on the U.S. National Road Team. In 1976, Ritchey retired from road racing. He continued to race mountain bikes through the early 1980s, competing more recently in races like the Downieville Classic, La Ruta, Trans Andes, Trans Alps and Cape Epic in South Africa.
During his early racing years, Ritchey began building bikes for Palo Alto Bicycles and its national mail order catalog. In 1974, as his senior year in high school approached, Ritchey had already built approximately 200 frames. It was around this time he honed his fillet brazing or "lugless" method of fabricating frames. Ritchey sought to challenge bicycle industry standards of frame tubing diameter at the time limited by the use of fixed dimensioned lugs. Ritchey's fillet brazing construction method allowed the choice of larger thin-wall tubing diameters and unique ovalizations to create lighter -stiffer frames. By 1979, Ritchey had produced over 1,000 frames on his own.
Personal life
Ritchey is married to his second wife, Martha. Together they have six children; son Jay, and daughters Sara and Annie (Tom), and sons Steven, David, and Christopher (Martha). Tom and Martha have six grandchildren.
Off-road riding and the mountain bike
Ritchey often cites his friend, the late Jobst Brandt as being crucial not only to his development as a cyclist and component designer, but for his deep passion in off-road riding. Brandt, author of the iconic book, The Bicycle Wheel, had a riding style that was unlike anyone else at the time. Brandt would lead his infamous rides that quickly left the paved roads behind and ventured onto to dirt single-track trails on traditional road bikes with no modification—something completely unheard in the 1960s and '70s.
In 1978, Ritchey was approached by Joe Breeze and Otis Guy to build a tandem for them to use in a record attempt across America. Breeze brought his newly made off-road "ballooner" bike to Ritchey's shop in Menlo Park.
While he credits Joe Breeze for building the first custom off-road specific 26" wheeled frame, however, known only to a few people, Ritchey had already built an off-road specific 650b bike along the design lines of a fatter tired, flat barred "woodsy/cow trail" bike. Ritchey says he was influenced by the late John Finley Scott, who encouraged him to build a bike for years with 650b wheels and tires.
Upon seeing Joe's bike, he said, "I think I’ll build something like that also." Breeze returned to his home of Fairfax, CA and told Gary Fisher of Ritchey's intentions to build a 26" "ballooner." Immediately, Fisher called Ritchey and asked Ritchey to build him one as well. Because of Ritchey's production mindset, he built a third frame. When Fisher picked up his frame a few months later and learned of the third frame, he told Ritchey, "I can sell that." The seeds of the new "mountain bike" company were sewn, beginning with Fisher selling bike #3 to a fellow Marin resident.
These "ballooners" were first featured in BMX Plus magazine, before the world identified them as a mountain bike, and a new buzz surrounded this new style of off-road bike.
Fisher enlisted the help of his friend and roommate, Charlie Kelly, to market and sell the bikes Ritchey was building. Because Ritchey had years of custom frame and component manufacturing experience, he was uniquely suited to tackle and establish many of the new designs and standards this new breed of bicycle would require. The company initially was called Ritchey MountainBikes, with Ritchey fillet brazing over 1000 bikes over the course of those beginning three years. This high volume of production lead to Ritchey becoming mountain biking's first production frame builder, earning him the moniker, "The General Motors of mountain bike frame companies," from Mike Sinyard of Specialized. The informal business lasted about three years, with Ritchey building the bikes in the mountains of the south bay peninsula while Fisher and Kelly sold them out of Fairfax and Marin.
In 1983, Ritchey left the relationship. Kelly also left due to personal reasons. On his own, Ritchey sold his remaining frames to a new company out of British Columbia, called Rocky Mountain Bicycles. Out of this turbulent time Ritchey built his own sales and marketing company, hired a retired professional road racer, Mike Neel, as his salesman and created Ritchey Design.
By the early 80s general interest in cycling was in decline, however, mountain biking was growing. Events like Pearl Pass and the NORBA '83 National Championships drove interest in the emerging sport. By the mid 1980s, over 25 percent of the bike industry was based on mountain bikes, with Ritchey emerging as the #1 off-road component design company outside of Shimano.
Innovations
Again, Jobst Brandt was crucial to the young and aspiring Ritchey, and the products he was designing. Brandt, a mechanical engineer at Hewlett-Packard, always called into question Tom's new ideas—scrutinizing every detail of his designs. Ritchey, who sought to design and produce components that were light and fast, was often countered by Brandt who demanded components be durable and strong enough to endure the back country epic rides Jobst liked to do. Ritchey's foundational design principles emerged from these dueling philosophies.
Among the first of Ritchey's designs to be brought to use was his "Logic" steel frame tubing. With the new era of fillet brazing he pioneered,[citation needed] and the new uprising of TIG welded frame production, Ritchey knew that condensed, force-direction butted tubing would produce steel frames that would be lighter and stronger than common butted tubes previously manufactured. Initially Ritchey sought tubes from Italian company Columbus however they didn't meet Ritchey's specifications, so Tange of Japan was the final supplier. Their success lead to the birth of Logic Tubing. This tubing changed the way tubing manufacturers thought about butting profiles,[citation needed] allowing the manufacture of lighter, yet extremely durable larger diameter steel tubing bikes. He later took his same shortened butt concept to spoke manufacturer DT Swiss to produce spokes to build lighter, stronger wheels.
Below is a list of a few innovations and firsts Ritchey produced:
1974 - Twin-plated crown forks
1979 - New "MountainBikes" frame
1980 - 130mm mountain bike specific rear hub
1980 - 120mm bottom bracket spindle to account for wider chain stays that accommodate a wider rear tire
1980 - The Bullmoose integrated mountain bike specific handlebar and stem
1983 - Standard unicrown tapered fork
1984 - Logic butted tubing
1984 - Developed new MTB specific tread design with IRC, Japan. Applied road tire technology to MTB tires, introducing a folding bead and 120tpi. In 1988, applied vector force analysis (VFA) tread designs to develop mountain bike tires featuring front & rear specific and rotation direction tires.
1985 - Vantage rim, the first welded mountain bike specific rim produced by Ukai; a wider, 25mm rim developed to better handle a wider knobby tire
1989 - Logic Condensed double butted spokes produced by DT Swiss
1989 - Developed alloy 3D net shape forging, for stems that led the way to a new generation of lighter, stiffer and stronger stems that did away with welding.
1992 - First to succeed in off center rim (OCR) technology which made possible a balanced spoke tension in rear wheels and off center disc specific front and rear wheels.
1995 - 2x9 speed drivetrain for mountain bikes
Film
Tom Ritchey was profiled in the 2007 documentary film Klunkerz: A Film About Mountain Bikes.
"Tom Ritchey's 40 Year Ride," a documentary was released in August 2012 chronicling four decades of Ritchey's business
"Rising from Ashes," a documentary film chronicling the beginning of Team Rwanda[2]
Ritchey has influenced many frame builders. The legendary frame builder and fabricator Paul Brodie has cited Tom Ritchey as one of his first influences:
Paul Brodie said in an article for thespoken.cc "However, two weeks later a red Ritchey Team Comp with matching red Bullmoose Bars showed up and totally blew me away. I had never seen anything like it, and couldn’t believe anyone could make a bike that beautiful. I had little money, so I decided to make my own…"[5]
Project Rwanda
In December 2005, Ritchey toured Rwanda by bicycle. He found the landscape to be beautiful, but the people and their journey of reconciliation were even more compelling.
Ritchey rode through the hilly countryside, (Rwanda is called Land of a Thousand Hills) and witnessed the incredible cycling talent that existed there, without any of the modern cycling technology available to the average cyclist here in the USA. Ritchey believed that a national cycling team could bring a sense of hope and national pride. Within the next few months, Ritchey began to formalize a 501c3 called, Project Rwanda. Ritchey then asked his friend, Jared Miller, if he would go to Rwanda to explore the possibility of putting on a cycling event.
On September 16, 2006, Ritchey sponsored the first annual Rwandan Wooden Bike Classic in Karongi Stadium: a mountain bike, wooden bike, and single speed colonial bike race. Attendance was over 3,000.
Ritchey asked North American Tour de France Stage winner, Alex Stieda, and cycling pioneer, Jock Boyer, to race alongside him at the event held to celebrate the wooden bike innovation and what it meant to Ritchey. After the event, Ritchey asked Boyer to help him in finding and cultivating cycling talent, which would become Team Rwanda.
Ritchey designed a geared cargo/coffee bike, capable of carrying heavy loads, to help the Rwandans, especially the coffee farmers in the rural areas of Rwanda, get their crops more efficiently to washing stations. He worked with other NGO's like World Vision and Bikes for Rwanda, to help distribute approximately 4,000 bikes, through micro finance programs and grants.
Quotes
"My bike is my office"
"Steel is real"
Related Research Articles
A mountain bike (MTB) or mountain bicycle is a bicycle designed for off-road cycling. Mountain bikes share some similarities with other bicycles, but incorporate features designed to enhance durability and performance in rough terrain, which makes them heavier, more complex and less efficient on smooth surfaces. These typically include a suspension fork, large knobby tires, more durable wheels, more powerful brakes, straight, extra wide handlebars to improve balance and comfort over rough terrain, and wide-ratio gearing optimised for topography and application. Rear suspension is ubiquitous in heavier-duty bikes and now common even in lighter bikes. Dropper posts can be installed to allow the rider to quickly adjust the seat height.
Mountain biking is a sport of riding bicycles off-road, often over rough terrain, usually using specially designed mountain bikes. Mountain bikes share similarities with other bikes but incorporate features designed to enhance durability and performance in rough terrain, such as air or coil-sprung shocks used as suspension, larger and wider wheels and tires, stronger frame materials, and mechanically or hydraulically actuated disc brakes. Mountain biking can generally be broken down into five distinct categories: cross country, trail riding, all mountain, downhill, and freeride.
A bicycle frame is the main component of a bicycle, onto which wheels and other components are fitted. The modern and most common frame design for an upright bicycle is based on the safety bicycle, and consists of two triangles: a main triangle and a paired rear triangle. This is known as the diamond frame. Frames are required to be strong, stiff and light, which they do by combining different materials and shapes.
Trek Bicycle Corporation is a bicycle and cycling product manufacturer and distributor under brand names Trek, Electra Bicycle Company, Bontrager, and Diamant Bikes. The company has previously manufactured bikes under the Gary Fisher, LeMond Racing Cycles, Klein, and Villiger Bikes brand names. With its headquarters in Waterloo, Wisconsin, Trek bicycles are marketed through 1,700 independently owned bicycle shops across North America, subsidiaries in Europe, Asia, South Africa, as well as distributors in 90 countries worldwide. Nearly all Trek bicycles are manufactured outside the United States, in countries including the Netherlands, Germany, Taiwan, and China.
A touring bicycle is a bicycle designed or modified to handle bicycle touring. To make the bikes sufficiently robust, comfortable and capable of carrying heavy loads, special features may include a long wheelbase, frame materials that favor flexibility over rigidity, heavy duty wheels, and multiple mounting points.
Reynolds 531 is a brand name, registered to Reynolds Technology of Birmingham in the United Kingdom, for a manganese–molybdenum, medium-carbon steel tubing that was used in many quality applications, including race car chassis, aircraft components and, most famously, bicycle frame tubing. It is one of a number of tubing types developed by Reynolds.
A racing bicycle, also known as a road bike is a bicycle designed for competitive road cycling, a sport governed by and according to the rules of the Union Cycliste Internationale (UCI).
A cyclo-cross bike or cyclo-cross bicycle is a bicycle specifically designed for the rigors of a cyclo-cross race. Cyclo-cross bicycles roughly resemble the racing bicycles used in road racing. The major differences between the two are the frame geometry, and the wider clearances that cyclo-cross bikes have for their larger tires and mud and other debris that they accumulate.
Charles Richard Kelly was an early pioneer in the development of modern mountain bicycles.
Joe Breeze is an American bicycle framebuilder, designer and advocate from Marin County, California. An early participant in the sport of mountain biking, Breeze, along with other pioneers including Gary Fisher, Charlie Kelly, and Tom Ritchey, is known for his central role in developing the mountain bike. Breeze is credited with designing and building the first all-new mountain bikes, which riders colloquially called Breezers. He built the prototype, known as Breezer #1, in 1977 and completed nine more Series I Breezers by early 1978. Breezer #1 is now in the collection of the Smithsonian Institution’s National Museum of American History.
Roberts Cycles is a custom bicycle frame building business that was originally located in Selhurst near Croydon, South London, and is now located in East Sussex, England.
Keith Bontrager is a motorcycle racer who became a pioneer in the development of the modern mountain bike. Between 1980 and 1995, he was president of his own Bontrager Company, which continues to develop components for Trek Bicycle Corporation after Trek bought out Bontrager.
Reynolds Technology is a manufacturer of tubing for bicycle frames and other bicycle components based in Birmingham, England established in 1898.
Miyata is a Japanese manufacturer of bicycles, unicycles and fire extinguishers. The company has been in operation since 1890. Miyata was also one of the first producers of motorcycles in Japan under the name Asahi. The Asahi AA was the first mass-produced motorcycle in Japan.
Lugged steel frame construction is a method of building bicycle frames using steel tubing mated with socket-like sleeves, called lugs. For most of the bicycle's history, steel has been the primary material for bicycle frames, with lugged construction the primary assembling method. Steel continues in use by builders of high-quality steel frames, though its dominance as a frame material has waned since the mid-1990s displaced largely by aluminum and carbon fiber; lugging has been displaced by TIG welding.
Univega is a bicycle brand created during the bike boom of the 1970s by Ben Lawee (1926–2002), who founded Lawee Inc. to design, specify, and import bicycles initially manufactured in Italy by Italvega, and subsequently in Japan by Miyata.
Geoffrey Cleland Apps is an English pioneer of all-terrain bicycles.
The following outline is provided as an overview of and topical guide to bicycles:
The Schwinn Paramount was a high-end racing bicycle produced under the Schwinn Bicycle Company brand from 1938 through 2009.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
