The American Star Bicycle was invented in 1880 by G. W. Pressey and manufactured by the H. B. Smith Machine Company in Smithville, Burlington County, New Jersey. [1] [2] It was characterized by a small wheel in front to avoid the problem of tipping forward inherent in other high wheelers. [3] A Star bicycle was photographed being ridden down the steps in front of the United States Capitol in 1885 to demonstrate its longitudinal stability, [4] and Star bicycles were used for the sport of bicycle polo in the mid-1880s. [5] Pressey sued Smith in 1887 for royalties. [6] The name "Star" was attributed to the double star arrangement of the spokes. [1]
The small front wheel, 18–23 inches (46–58 cm) in diameter, steered, and the large rear wheel, 42–60 inches (110–150 cm) in diameter, provided the forward driving force and bore most of the rider's weight. [7] The light load on the front wheel was reported to have made it skittish on loose surfaces such as sand and gravel. [2] American Stars incorporated pneumatic tires very soon after they were developed, [8] and braking was provided by a spoon brake acting on the rear wheel and actuated by a lever on the right handlebar. [1]
A pair of independent treadle mechanisms collected power from the rider's legs instead of a crank. Power from each treadle was transferred to the rear wheel by a leather strap over a ratchet mechanism. (See image in gallery below.) The attachment point of the leather strap could be moved to provide multiple gear ratios, and both treadles could be pressed simultaneously for a brief increase in torque. [9] A spring attached to the ratchet rewound the strap when the foot was raised. [7] This treadle arrangement also allowed riders of different sizes to ride the same bike comfortably without modification, as the pedals were not constrained to trace a circle about an axle. [1]
An undated advertisement lists prices from $75 to $120, depending on wheel size and finish, which varied from "plainly finished machine; painted and striped" to "all nickled [ sic ] and polished, except the rim, which is painted and striped in gold." [1]
Smith also offered tricycles in 1887 and 1888 [10] and patented a steam tricycle in 1889. [11] [12]
At the first Maricopa County Fair in 1884, Lucius Copeland demonstrated his steam bicycle, one of the first motorcycles, a steam-powered Star high-wheeler. It was claimed to have traveled 1 mile (1.6 km) in 4 minutes, at a steam pressure of 80 pounds per square inch (5.5 bar), and carried enough water and fuel to run for an hour. [13] [14] [15] [16]
"American Star" was also a brand name used by a Japanese bicycle manufacturer in the 1960s and 1970s. [17]
The Smith Machine Co. commissioned several musical compositions to promote the American Star Bicycle. [18] In 1882, Chas. W. Nathan composed the Star Bicycle Gallop for piano, [19] and in 1883, John Ford composed The Star Rider. Song & Chorus for piano and voice, which was provided on the back cover of advertisements for American Star Bicycles. [20]
The penny-farthing, also known as a high wheel, high wheeler or ordinary, is an early type of bicycle. It was popular in the 1870s and 1880s, with its large front wheel providing high speeds, owing to it travelling a large distance for every rotation of the wheel. These bicycles had solid rubber tires and as a consequence the only shock absorption was in the saddle.
In mechanical or automotive engineering, a freewheel or overrunning clutch is a device in a transmission that disengages the driveshaft from the driven shaft when the driven shaft rotates faster than the driveshaft. An overdrive is sometimes mistakenly called a freewheel, but is otherwise unrelated.
Vehicles that have two wheels and require balancing by the rider date back to the early 19th century. The first means of transport making use of two wheels arranged consecutively, and thus the archetype of the bicycle, was the German draisine dating back to 1817. The term bicycle was coined in France in the 1860s, and the descriptive title "penny farthing", used to describe an "ordinary bicycle", is a 19th-century term.
A safety bicycle is a type of bicycle that became very popular beginning in the late 1880s as an alternative to the penny-farthing and is now the most common type of bicycle. Early bicycles of this style were known as safety bicycles because they were noted for, and marketed as, being safer than the high wheelers they were replacing. Even though modern bicycles use a similar design, the term is rarely used today and is considered obsolete outside circles familiar with high wheelers.
Kirkpatrick Macmillan was a Scottish blacksmith. He is generally credited with inventing the treadle bicycle.
A motorized bicycle is a bicycle with an attached motor or engine and transmission used either to power the vehicle unassisted, or to assist with pedalling. Since it sometimes retains both pedals and a discrete connected drive for rider-powered propulsion, the motorized bicycle is in technical terms a true bicycle, albeit a power-assisted one. Typically they are incapable of speeds above 52 km/h (32 mph); however, in recent years larger motors have been built, allowing bikes to reach speeds of upwards of 113 km/h.
John Kemp Starley was an English inventor and industrialist who is widely considered the inventor of the modern safety bicycle, and also originator of the tradename Rover.
Wire wheels, wire-spoked wheels, tension-spoked wheels, or "suspension" wheels are wheels whose rims connect to their hubs by wire spokes. Although these wires are considerably stiffer than a similar diameter wire rope, they function mechanically the same as tensioned flexible wires, keeping the rim true while supporting applied loads. The term suspension wheel should not be confused with vehicle suspension.
The bike boom or bicycle craze is any of several specific historic periods marked by increased bicycle enthusiasm, popularity, and sales.
The history of the motorcycle begins in the second half of the 19th century. Motorcycles are descended from the "safety bicycle," a bicycle with front and rear wheels of the same size and a pedal crank mechanism to drive the rear wheel. Despite some early landmarks in its development, the motorcycle lacks a rigid pedigree that can be traced back to a single idea or machine. Instead, the idea seems to have occurred to numerous engineers and inventors around Europe at around the same time.
The following outline is provided as an overview of and topical guide to bicycles:
A treadle bicycle is a bicycle powered by a treadle instead of the more common crank. Treadles were one of the mechanisms inventors tried in order to position the pedals away from the drive wheel hub before the development of the bicycle chain or instead of it. Treadles have also been used to drive tricycles and quadracycles.
Bicycle drivetrain systems are used to transmit power on bicycles, tricycles, quadracycles, unicycles, or other human-powered vehicles from the riders to the drive wheels. Most also include some type of a mechanism to convert speed and torque via gear ratios.
A wheelie bike, also called a dragster, muscle bike, high-riser, spyder bike or banana bike, is a type of stylized children's bicycle designed in the 1960s to resemble a chopper motorcycle and characterized by ape hanger handlebars, a banana seat with sissy bar, and small wheels. Notable examples include the Schwinn Sting-Ray and Krate lines and the Raleigh Chopper line. Other notable manufacturers and retailers that offered models include AMF, CCM, Columbia, Huffy, Iverson, J. C. Penney, Malvern Star, Monark, Murray, Ross, Sears, and Vindec.
Lucius Day Copeland was a pioneering 19th-century engineer and inventor from Phoenix, Arizona who demonstrated one of the first motorcycles, the Copeland steam bicycle, a steam-powered Star high-wheeler at the first Arizona Territorial Fair in 1884.
The Michaux-Perreaux steam velocipede was a steam powered velocipede made in France some time from 1867 to 1871, when a small Louis-Guillaume Perreaux commercial steam engine was attached to a Pierre Michaux manufactured iron framed pedal bicycle. It is one of three motorcycles claimed to be the first motorcycle, along with the Roper steam velocipede of 1867 or 1868, and the internal combustion engine Daimler Reitwagen of 1885. Perreaux continued development of his steam cycle, and exhibited a tricycle version by 1884. The only Michaux-Perreaux steam velocipede made, on loan from the Musée de l'Île-de-France, Sceaux, was the first machine viewers saw upon entering the Solomon R. Guggenheim Museum rotunda in The Art of the Motorcycle exhibition in New York in 1998.
The Roper steam velocipede was a steam-powered velocipede built by inventor Sylvester H. Roper of Roxbury, Boston, Massachusetts, United States sometime from 1867 to 1869. It is one of three machines which have been called the first motorcycle, along with the Michaux-Perreaux steam velocipede, also dated 1867–1869, and the 1885 Daimler Reitwagen. Historians disagree over whether the Roper or the Michaux-Perreaux came first. Though the Reitwagen came many years later than the two steam cycles, it is often labeled as the "first motorcycle" because there is doubt by some experts whether a steam cycle should meet the definition of a motorcycle.
The Copeland steam bicycle was a steam powered, two-wheeled motor vehicle made by Lucius Copeland in 1881 and is sometimes classed as an early motorcycle.
Whippet was a brand of safety bicycle designed by C. M. Linley and manufactured by Linley and Briggs in London. Examples exist from 1885 and 1888. They are notable for their use of springs to suspend the frame. An early external derailleur, that enabled two gear ratios and used a freewheel hub was introduced in the summer of 1894, and was available only on Whippet bicycles.
American Star Bicycle.