Truant was a steamboat that was operated in the Yaquina Bay region of Oregon from 1911 to 1919, transporting passengers and freight, and engaging in towing work. After 1919, Truant was transferred to the Columbia River.
Truant was built by George C. Walker of Toledo, Oregon, for the Modern Improvement Company, also of Toledo.[1]
Truant was launched on Saturday, October 2, 1909.[2] Following the launch, the boat was taken from the yard over to the town of Toledo where the machinery would be installed.[2] The new boat would be about the same size as the Ella May.[2] In early November 1909, the boiler and engine had been installed, while the company was building simultaneously a steam-driven pile driver on a barge.[3] The company was also engaged at the same time in erecting a steam-driven pile driver on a barge.[3]
Design and power
Truant was reported in the press to be 60 feet (18.29m) long.[1]Truant's official registered dimensions were length of 53.2 feet (16.22m), beam of 12.4 feet (3.78m) and 4.8 feet (1.46m) depth of hold.[4] These dimensions basically match those furnished in 1956 by Truant's owner, Jack Fogarty.[5]Truant'stonnage (a measure of carrying capacity and not of weight) was 33 gross tons and 29 net tons.[1][4] Total crew required was two.[4]
Power was supplied by a steeple double compound steam engines with cylinders 5 and 10 inches in diameter, with a 6-inch stroke, generating 80 horsepower.[1][4] There was one Roberts boiler.[1] The value of the boat as constructed was $6,000.[1]
Truant's official merchant vessel registry number was 206932.[4] In 1911 the boat's home port was shown as Yaquina, Oregon.[4]
Owners
As of January 14, 1910, George C. Walker, builder of Truant, was associated with the Modern Improvement Company, the owner of the vessel.[6] On November 29, 1911, as a result of apparently acrimonious disagreements among the shareholders, the Modern Improvement Company was dissolved.[7] The elaborately descriptive dissolution notice stated:
Whereas, this the Modern Improvement Company, has been torn asunder with dissension .and strife, back biting and lying and cross haul in Its multitudinous forms; disagreeing on important as well as trivial matters; rife with Internal disorder generally, and "Whereas, 'A house divided against Itself must fall,' all of the stock holders voted unanimously in favor of dissolution. "Be it resolved that we do dissolve, fall, disband, disintegrate, evaporate and disappear this 29th day of November, 1911.[6]
Jack Fogarty, who became owner of the Truant in 1911,[5] lived in Toledo for five years while he operated the boat.[8] In May 1913, Maurice Anderson bought an interest in the towing and pile-driving business of Capt. Jack Fogarty.[9] At the same time, Anderson also become part owner of Truant.[9] The new firm would be known as Fogarty & Anderson.[9]
Operations
Advertisement for Truant, 1915, showing range of service provided.
Truant was engaged in carrying freight and passengers and doing towing service on Yaquina Bay and river until 1919.[5] On February 11, 1910, the steamboat had been in the vicinity of Elk City, Oregon, for a few days with the company’s pile driver.[10]
On Sunday March 6, 1910, Truant carried the committee which was charged with the responsibility of taking the soundings on several sand bars in the river between Toledo and Oysterville, Oregon.[11] The measurements were taken at low tide and were reported to have been “most gratifying.”[11]
Truant's first regular run was scheduled to be an excursion from Toledo to Newport, Oregon on Sunday, April 24, 1910.[12] The steamer was scheduled to leave Toledo at 9a.m., and depart Newport on the return trip at 6p.m.[12] The round trip fare would be 50 cents.[12] The owners intended to make regular Sunday excursions to Newport during the coming summer of 1910.[12]
In the first part of the week of December 9, 1910, steamboat inspectors Welden and Ames from Portland were in Toledo and inspected Truant.[13]
In the week prior to October 13, 1916, Truant was at the Hanson shipyard for repairs to be put into “first class shape” for the winter season.[14]
Grounding
On Saturday, May 8, 1910 Truant carried about twenty-five people from Newport up to Toledo for a dance.[15] On the return trip, the boat ran into a dense fog.[16]
At about 2a.m., the boat ran aground on the south beach of Yaquina Bay.[15] The Yaquina Bay life-saving crew, under the command of Captain Wellendar, heard steam exhausting and went to investigate.[16] They found Truant and with two trips, took off the passengers.[16] There was no damage to the boat and no one was hurt.[16] An ocean navigator, Paul Perkins, had been on board Truant, and he reported that Captain Fogarty had done all he could and remained cool.[16]
The boat itself was not able to get off until the next morning, and was then due at 10a.m. at Toledo to pick up an excursion bound for Elk City.[15] When Truant came within sight of the waiting crowd at Elk City, the boat broke its propeller shaft.[15]
Excursions
Advertisement for Truant, 1911.
On the Saturday night before June 3, 1910, took over 60 people from Toledo to Newport to watch a boxing match.[17] Because Truant was only licensed to carry 50 passengers, the excess persons were transported on board the launch Chicora and towed behind Truant.[17]
On the Fourth of July, 1910, Truant was scheduled to make extra excursion runs from Toledo to Newport, to leave Toledo at 7a.m., 12:30p.m., and 7:30p.m., and departing Newport for Toledo at 10a.m., 6p.m., and immediately after the dance at night.[18] The round trip fare was 75 cents, 25 cents more than the usual Sunday excursion fare to Newport on Truant.[18]
On the Sunday, August 14, 1910, Newport had a large clam bake at which served, by one report, over 2,500 people, and by another report, about 4,000[19] There was a “vast crowd” which “filled the town to overflowing.”[19] Over 1,000 people had come in to Toledo on a train from the Willamette Valley, and they were transported from there to Newport by Truant, the steamer Newport, and many launches, with Truant itself carrying about 140.[19] To accommodate so many passengers was well beyond the capacity of both Truant and Newport, and so each steamer towed a barge carrying passengers.[20]
Accident on board
Truant, some time between 1910 and 1919.
On the Saturday before July 5, 1912, as Truant was leaving Toledo and headed downriver, engineer Jack Fogarty, who was also one of the owners of the boat, got his arm entangled with the machinery.[21] The cause of the accident appears to have been his sleeve catching on a bolt head.[22] Fogarty’s wife was on board, in the cabin.[21] He called out to her for help, but when she attempted to stop the engines, she threw the throttle the wrong way, and increased their speed.[21] She in turn called out to Frank Fogarty, Jack’s brother, who was in the pilot house, and he was able to quickly stop the engines.[21] According to one report, Jack Fogarty’s arm was badly cut and bruised, and it was thought that he would not be able to return to work for weeks.[21] According to another report, Fogarty’s arm was almost pulled from its socket and his right side was seriously injured.[22]
Salvage of the Frederick
On December 13, 1913, the barge Frederick, owned by the Porter Brothers, of Portland was wrecked on the jetty at the entrance to Yaquina Bay and beached.[23]Frederick was carrying 60 tons of dynamite, which was removed and placed onto a smaller barge.[23] During the night, the smaller barge carrying the dynamite broke its moorings.[23]Truant and the steam tug Fearless were on hand and started in pursuit, eventually capturing the loose barge.[23] While this was happening along shore people sought cover against the possible explosion of the dynamite.[23] A few days later Frederick in turn broke its moorings, and sank all the way up to the pilot house of the barge.[23] Another loss occurred during this situation when a scow chartered by the Porter Brothers from Jack Fogarty became jammed and had both ends stove in.[23]
Later years
In about 1919, Truant was converted to a motor vessel, driven by an 80-horsepower Standard gasoline engine.[5] In 1920, Truant was registered as a gasoline-powered vessel, gross tons 26 and net tons 23, with the home port shown as Newport, Oregon.[24] By 1924, the steamboat had been reduced in size to 17 gross and 6 net tons, and was running freight only.[25] In 1925, Truant was registered with a new home port, Portland, Oregon, under the ownership of Herman Loesch, whose office was at 395 East Morrison Street, as the registered owner.[26] This continued to be the case in 1935, although the boat was listed as being used for fishery purposes.[27]
1 2 3 4 Fogarty, Jack (1956). Some History of Early Steamboating on Yaquina Bay. Newport, OR: Lincoln County Historical Society. pp.8–9. ASINB0007GS4BO.
The history of steamboats on the Oregon Coast begins in the late 19th century. Before the development of modern road and rail networks, transportation on the coast of Oregon was largely water-borne. This article focuses on inland steamboats and similar craft operating in, from south to north on the coast: Rogue River, Coquille River, Coos Bay, Umpqua River, Siuslaw Bay, Yaquina Bay, Siletz River, and Tillamook Bay. The boats were all very small, nothing like the big sternwheelers and propeller boats that ran on the Columbia River or Puget Sound. There were many of them, however, and they came to be known as the "mosquito fleet."
Yaquina Bay, like Coos Bay, is a shallow coastal bay on the Oregon Coast in the Pacific Northwest of North America. The principal town on Yaquina Bay is Newport, Oregon. The Yaquina River flows into the bay. Until modern roads reached Newport in the late 1920s, the principal transportation method to and from Newport was by ship or boat.
T.M. Richardson was a steamboat built in 1888 at Oneatta, Oregon, which served on Yaquina Bay and on the Yaquina River from 1888 to 1908. This vessel was commonly known as the Richardson or the T.M.
Sarah Dixon was a wooden sternwheel-driven steamboat operated by the Shaver Transportation Company on the Columbia and lower Willamette rivers from 1892 to 1926. Originally Sarah Dixon was built as a mixed use passenger and freight vessel, and was considered a prestige vessel for the time.
Montesano was a steamboat that was operated from 1882 to about 1903 in the coastal regions of Oregon and southwest Washington, including Astoria, Willapa Bay, Grays Harbor, the Chehalis River, Yaquina Bay and Coos Bay. The Montesano of 1882, built in Astoria, should not be confused with another, larger sternwheeler, also named Montesano, built in Cosmopolis, Washington in 1889.
Tressa May was a steamboat that was operated in the Yaquina Bay region of Oregon from 1883 to 1888.
The Lincoln County Leader was a weekly American newspaper published in Toledo, Oregon from 1893 to 1987. The newspaper was originally published as a Democratic paper, but its party affiliation changed with the ownership. For many years the newspaper was the primary journal in Lincoln County.
Newport was an American steamboat built in 1908 at Yaquina City, Oregon. Now a ghost town, Yaquina City was then the terminus of the Corvallis & Eastern Railroad. For many years Newport transported excursionists in the summer months across a short water route between Yaquina City and the town of Newport, Oregon.
Three Sisters was a sternwheel-driven steamboat that operated on the Willamette River from 1886 to 1896. The steamer was built as an extreme shallow-draft vessel, to permit it to reach points on the upper Willamette river such as Corvallis, Harrisburg and Eugene, Oregon during summer months when water levels in the river were generally low. The vessel was also known for having been washed up on a county road in Oregon during a flood in 1890.
Klamath was the first and only vessel larger than a launch to operate on Lower Klamath Lake, which straddled the border between the U.S. states of Oregon and California. This vessel is chiefly known for having been hauled overland by rail from Lake Ewauna to Upper Klamath Lake. It was also one of only two licensed merchant vessels ever to operate on lower Klamath Lake. During 1905 to 1909, Klamath was an essential link in a transportation line to Klamath Falls which involved rail, stage coach, and steamer travel. The late arrival of railroads to the Klamath lakes region made riverine and lake transport more important to the area.
Bonita was a steamboat which operated on the Willamette and Yamhill rivers. This boat was renamed Metlako in 1902, and operated under that name until 1924 on the Columbia River and its tributaries, the Cowlitz, Lewis and Lake rivers. In 1924, Metlako was renamed B. H. Smith Jr., operating under that name until 1931, when the steamer was abandoned. As Bonita, in September 1900, this vessel was the first steamer to pass through the Yamhill locks.
Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.
Fanny Patton was a stern-wheel driven steamboat that operated on the Willamette River, in Oregon, starting in August 1865. This steamer operated from 1865 to 1880 for various owners, and was a considered a profitable vessel. The steamer was named for the daughter of businessman Edwin N Cook, Frances Mary "Fannie" Cooke (1837–1886), who married Thomas McFadden Patton in 1854. Edwin N. Cook was one of the principals of the People's Transportation Company.
Telephone was a sternwheel-driven steamboat built in 1884 by Captain Uriah Bonsor “U.B.” Scott for service on the Columbia River. Reputedly the fastest steamboat in the world in its time, Telephone served on the Columbia River and San Francisco Bay. Telephone was rebuilt at least twice. The first time was after a fire in 1887 which nearly destroyed the vessel. The reconstructed and much larger second vessel was sometimes referred to as Telephone No. 2. The third vessel, Telephone No. 3, built in 1903 and using components from the second steamer was larger but little used during its time on the Columbia river.
Gazelle was a gasoline powered launch that operated on the Willamette and Columbia river from 1905 to 1911. For short periods of time Gazelle was operated on the Oregon Coast, on Yaquina Bay and also as an off-shore fishing vessel, in the Coos Bay area.
Mascot was a sternwheel-driven steamboat built in 1890 which operated primarily on a route running from Portland, Oregon down the Willamette and Columbia rivers to points on the Lewis and Lake rivers. Points served included the town of Woodland, Washington, on the main branch of the Lewis, and La Center, Washington on the east fork.
Northwest was a steamboat that operated on the Columbia, Cowlitz and lower Willamette rivers from 1889 to 1907. In 1907 Northwest was transferred to Alaska, where it sank on the Skeena River
Joseph Kellogg was a stern-wheel driven steamboat that operated on the Willamette, Columbia, and Cowlitz rivers for the Kellogg Transportation Company. It was named after the company's founder, Joseph Kellogg (1812-1903). The sternwheeler Joseph Kellogg was built in 1881 at Portland, Oregon.
Chester was a shallow draft steamboat built in 1897 that ran until 1917, mostly on the Cowlitz River in southwestern Washington.
N.S. Bentley, commonly referred to as simply Bentley, was a stern-wheel driven steamboat that operated on the Willamette rivers. Launched in East Portland in December 1886, Bentley ran until 1896, when it was rebuilt and renamed Albany. Bentley was owned by the Oregon Pacific Railway, and was used as part of a rail and marine link from Portland to San Francisco, running down the Willamette, then to Yaquina Bay, and then by ocean steamer south to California. In 1896, Bentley was rebuilt and renamed Albany.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
