Montesano in Yaquina Bay, probably June 1887. | |
History | |
---|---|
Name | Montesano |
In service | 1882 |
Identification | U.S. 91400 |
Notes | Wooden hull |
General characteristics | |
Type | Inland passenger/freight/towing |
Tonnage | 112.55 gross tons, 87.01 net tons |
Length | 79.6 ft (24.26 m) |
Beam | 17.8 ft (5.43 m) |
Depth | 4.4 ft (1.34 m) depth of hold |
Installed power | twin steam engines, horizontally mounted |
Propulsion | stern wheel |
Montesano was a steamboat that was operated from 1882 to about 1903 in the coastal regions of Oregon and southwest Washington, including Astoria, Willapa Bay, Grays Harbor, the Chehalis River, Yaquina Bay and Coos Bay. The Montesano of 1882, built in Astoria, should not be confused with another, larger sternwheeler, also named Montesano, built-in Cosmopolis, Washington, in 1889.
Montesano was built in 1882 at Astoria, Oregon, for the Shoalwater Bay Transportation Company. [1] [2] [3]
One of the principals of the Shoalwater Bay Transportation Company was Lewis A. Loomis (1830–1913), an early businessman in the Ilwaco - Long Beach area of Pacific County, Washington. [4] Loomis was also a principal behind the Ilwaco Railway and Navigation Company. [4]
A meeting of the shareholders of the Shoalwater Bay Transportation Company was scheduled to have been held on November 15, 1881, where a proposition to increase the capital stock of the company was to be acted upon. [2] It was reported to have been probable that another steamer would be brought into service. [2]
The keel was laid on October 8, 1881. [5] The hull and planking were from Oregon fir. [5] The cabin structure, called the "house", was built of cedar. [5] By December 4, 1881, planking was complete on the new steamer. [6] It is possible that the vessel was originally intended to be named Chehalis. [5]
The new boat was launched on Saturday, January 7, 1882. [5] On January 9, 1882, the boat was towed to Portland by the steamer Favorite to have the machinery installed at the Willamette Iron Works. [5] The boat was to have twin engines, each with a cylinder 12 inches in diameter with a 36-inch stroke. [5]
By March 10, 1882, the installation of machinery was complete [7] A name, Montesano, had been picked for the boat, after a settlement on the Chehalis River. [7] A trial trip was taken on Wednesday afternoon, March 8, 1882, and the boat were expected to be run downriver from Portland to Astoria in a day or so after March 10. [7] Montesano would be run together with Garfield, another steamer owned by Shoalwater Bay Transportation Co. [7] The Daily Astorian was enthusiastic about the prospects for the new boat:
These boats are the Avant courier of coastlines that will one day center at Astoria as the natural headquarters and are admirably adapted for the trade they are to be engaged in. The country in the immediate vicinity of Gray's Harbor is a tributary by nature to this place and permanent means of communication is all that is needed for our merchants to secure the trade of that section. [7]
When complete, Montesano was 79.6 ft (24.26 m ), long with a beam of 17.8 ft (5.43 m ) and depth of hold of 4.4 ft (1.34 m ). [1] The length of the sternwheeler was once reported as 95 ft (28.96 m ) in the press. [5] This difference may have been as a result of measuring the vessel over the deck, which included the stern extension to mount the stern wheel, as opposed o a shorter measurement over the length of the hull alone. The home port in 1887 was Astoria. [1] The official merchant vessel registration number was 91400. [1] Gross tonnage was 112.55 and net tonnage was 87.01. [1]
On the Thursday before May 3, 1882, Montesano left Astoria for the Chehalis River and arrived on the same day. [8]
In November 1882, Montesano was running to Elma, Washington on the Chehalis River. [9]
In the summer of 1882, Montesano operated as part of a transportation line connecting Astoria with Olympia, Washington by a combination of steamboats and stage lines. [10] Travellers on this route could reach Olympia from Astoria in 60 days. [10]
Starting on March 14, 1883, the steamers of the Shoalwater Bay Transportation Company carried mail from Astoria to Montesano, Washington and then to Olympia once a week, with extra mail on Saturday. [11] It took one day on this route to reach Montesano from Astoria. [11] Travel time to Olympia continued to take 60 hours. [11]
Some sources indicate that Montesano operated on Willapa Bay, then known as Shoalwater Bay. [12] In 1882, the Shoalwater Bay Transportation Company launched Montesano at Astoria to run mail from Willapa (originally known as Woodard's Landing) to Sealand, now known as Nahcotta, Washington on the Long Beach Peninsula. [12]
Woodard's Landing, which in October 1884 was described as "the second place of importance in the region", was about 10 miles up the Willapa River from the present city of South Bend, Washington. [13] Steamers at South Bend could readily reach Woodard's Landing at high tide. [13] In late 1884, the settlement at Woodard's Landing, which was sustained principally by the logging industry on the upper Willapa River, consisted of two stores, two hotels, and a warehouse. [13]
Montesano was handled on the Willapa Bay route by two members of a prominent steamboating family, Capt. James P. Whitcomb as master and his brother George A. Whitcomb (1854–1937), as a mate. [12]
Montesano's service on the Chehalis River was brief. [3] The boat was then transferred to the lower Columbia River, where it was in service from 1886 to 1889, according to one historian. [3] A contemporary source states however that Montesano was transferred to Yaquina Bay, in the central Oregon coast, in June 1887. [14] Prior to the departure for Yaquina Bay, Montesano is reported to have been once more in service in Grays Harbor, but dates for this second period of operations in the Chehalis River area are not furnished in the source. [3]
On the evening of June 8, 1887, Montesano departed Astoria bound for Yaquina Bay which was to be the boat's new base of operations. [14] On August 19, 1887, it was reported that the Shoalwater Bay Transportation Company was about to disincorporate. [15]
Montesano was reported in a contemporary source owned by D.H. Welch when in service at Yaquina Bay in 1887. [16] In June, 1887, D.H. Welch raced Montesano against the propeller-driven steamer Tressa May . [16] The race went from Yaquina City to Newport, Oregon. [16] Both vessels arrived at almost the same time, with Montesano just a little ahead. [16] H.W. Dunham (b. 1845) is also reported to have been master of Montesano while the boat was in Yaquina Bay, which may have been subsequent to D.H. Welch. [3]
Montesano was transferred to Coos Bay by H.W. Dunham. [3] There were difficulties in carrying out the transfer. Montesano may have been taken in Astoria from Yaquina Bay before transfer to Coos Bay. Montesano was reported to have departed Astoria a few days prior to June 13, 1888. [17] It was later reported that Montesano had gone ashore on the south spit at the mouth of the Nehalem River. [17] Further details were not then available. [17]
On July 2, 1888, Montesano was still at Yaquina. [18] It was reported that the boat would leave for Coos Bay "at the first favorable opportunity." [18] On July 4, 1888, the tug Columbia, under Captain Magee, was dispatched from Coos Bay to Yaquina Bay to bring down Montesano, which then belonged to the Southern Oregon Company. [19] Arriving at Yaquina Bay, Columbia found the bar so rough that two coastal steamers at the bay were unable to depart. [19] Columbia did enter the bay, but the next day sea conditions were still too extreme for Montesano, so Columbia had to depart without the sternwheeler. [19]
The transfer to Coos Bay appears to have occurred by 1889, when Montesano's home port was listed as Coos Bay. [20] Dunham ran Montesano on Coos Bay for nearly a year. [21] While on Coos Bay, Montesano towed logs for the mill of the Southern Oregon Company at Empire. [3] On September 18, 1890, Montesano was reported to be undergoing repairs at the shipyard of Christenson & Johnson. [22] On September 25, 1890, the repairs to the Montesano were reported to be complete and the steamer was back in service. [23] Prior to 1898, James T. Hall (b. 1859) was a master of Montesano while the boat was in Coos Bay. [24]
Montesano is reported to have been laid up and stripped prior to 1900. [3] This may have occurred later than 1900, as Montesano continued to be listed on the official merchant vessel registry in 1903. [25]
Wide West was a steamboat that served in the Pacific Northwest of the United States. It had a reputation as a luxury boat of its days.
Willapa Bay is a large shallow body of water near the Pacific Ocean in southwestern Washington. For a number of years before modern roads were built in Pacific County, Washington, the bay was used as the means of travel around the county, by powered and unpowered craft, including several steamboats.
The history of steamboats on the Oregon Coast begins in the late 19th century. Before the development of modern road and rail networks, transportation on the coast of Oregon was largely water-borne. This article focuses on inland steamboats and similar craft operating in, from south to north on the coast: Rogue River, Coquille River, Coos Bay, Umpqua River, Siuslaw Bay, Yaquina Bay, Siletz River, and Tillamook Bay. The boats were all very small, nothing like the big sternwheelers and propeller boats that ran on the Columbia River or Puget Sound. There were many of them, however, and they came to be known as the "mosquito fleet."
Yaquina Bay, like Coos Bay, is a shallow coastal bay on the Oregon Coast in the Pacific Northwest of North America. The principal town on Yaquina Bay is Newport, Oregon. The Yaquina River flows into the bay. Until modern roads reached Newport in the late 1920s, the principal transportation method to and from Newport was by ship or boat.
Olympian was a large side-wheel inland steamship that operated in the Pacific Northwest and Alaska. Olympian operated from early 1884 to late 1891 on the Columbia River, Puget Sound, and the Inside Passage of British Columbia and Alaska.
General Miles was a steamship constructed in 1882 which served in various coastal areas of the states of Oregon and Washington, as well as British Columbia and the territory of Alaska. It was apparently named after US General Nelson A. Miles.
T.M. Richardson was a steamboat built in 1888 at Oneatta, Oregon, which served on Yaquina Bay and on the Yaquina River from 1888 to 1908. This vessel was commonly known as the Richardson or the T.M.
Tressa May was a steamboat that was operated in the Yaquina Bay region of Oregon from 1883 to 1888.
Ocean Wave was a steamboat that was operated from 1891 to 1897 on the Columbia River, from 1897 to 1899 on Puget Sound and from 1899 to 1911 as a ferry on San Francisco Bay. Ocean Wave is perhaps best known for transporting summer vacationers from Portland, Oregon to seaside resorts near Ilwaco, Washington during its service on the Columbia River. This vessel is also known for being the first ferry placed in service by the Atchison, Topeka and Santa Fe Railway.
W.H. Harrison was a steam schooner that operated from 1890 to 1905 on the coast of Oregon, the lower Columbia River, and southwest Washington state. At that time the salmon cannery industry was one of the major businesses of the coast. W.H. Harrison, while also carrying passengers and transporting general freight and lumber, was one of a number of steamers supplying materials to canneries along the coast, and transporting cases of canned salmon from the canneries.
Emma Hayward commonly called the Hayward, was a steamboat that served in the Pacific Northwest. This vessel was once one of the finest and fastest steamboats on the Columbia River and Puget Sound. As newer vessels came into service, Emma Hayward was relegated to secondary roles, and, by 1891, was converted into a Columbia river tow boat.
Harvest Queen was the name of two stern-wheel steamboat built and operated in Oregon. Both vessels were well known in their day and had reputations for speed, power, and efficiency.The first Harvest Queen, widely considered one of the finest steamers of its day, was constructed at Celilo, Oregon, which was then separated from the other portions of the navigable Columbia River by two stretches of difficult to pass rapids.
Fanny Patton was a stern-wheel driven steamboat that operated on the Willamette River, in Oregon, starting in August 1865. This steamer operated from 1865 to 1880 for various owners, and was a considered a profitable vessel. The steamer was named for the daughter of businessman Edwin N Cook, Frances Mary "Fannie" Cooke (1837–1886). Edwin N. Cook was one of the principals of the People's Transportation Company.
Telephone was a sternwheel-driven steamboat built in 1884 by Captain Uriah Bonsor "U.B." Scott for service on the Columbia River. Reputedly the fastest steamboat in the world in its time, Telephone served on the Columbia River and San Francisco Bay. Telephone was rebuilt at least twice. The first time was after a fire in 1887 which nearly destroyed the vessel. The reconstructed and much larger second vessel was sometimes referred to as Telephone No. 2. The third vessel, Telephone No. 3, built in 1903 and using components from the second steamer was larger but little used during its time on the Columbia river.
Gazelle was a gasoline powered launch that operated on the Willamette and Columbia river from 1905 to 1911. For short periods of time Gazelle was operated on the Oregon Coast, on Yaquina Bay and also as an off-shore fishing vessel, in the Coos Bay area.
Governor Newell was a sternwheel-driven steamboat that operated from 1883 to 1902 in the Pacific Northwest.
Clara Parker was a sternwheel-driven steamboat which was operated on the lower Columbia and lower Willamette rivers in the 1880s. The steamer ran for about ten years out of Astoria, Oregon in towing and jobbing work. In 1890 Clara Parker was rebuilt and renamed Astorian.
N.S. Bentley, commonly referred to as simply Bentley, was a stern-wheel driven steamboat that operated on the Willamette rivers. Launched in East Portland in December 1886, Bentley ran until 1896, when it was rebuilt and renamed Albany. Bentley was owned by the Oregon Pacific Railway, and was used as part of a rail and marine link from Portland to San Francisco, running down the Willamette, then to Yaquina Bay, and then by ocean steamer south to California. In 1896, Bentley was rebuilt and renamed Albany.
Ilwaco was a small riverine and coastal steamship built in 1890 which was operated as a passenger vessel for the Ilwaco Railway and Navigation Company, and later served in other roles, including tow and freight boat, cannery tender and fish packing vessel. Ilwaco was originally named Suomi.
The Callendar Navigation Company, sometimes seen as the Callendar Transportation Company, started in business in the early 1900s. Callendar was formed in the early 1900s, and was based in Astoria, Oregon. Callender was to become one of six large towing companies of the Columbia and Willamette rivers in the early decades of the 1900s, the others being Shaver Transportation, Smith Transportation, Hosford, Knappton Towing Co., and Willamette and Columbia River Towing Co. In 1922, Callendar Navigation merged with Knappton Towboat Co., which existed, with a name change in 1990, and which became part of Foss Marine in 1993.