Jennie Clark

Last updated
Jenny Clark ad 1855.png
History
NameJenny Clark
Owner Jacob Kamm, John C. Ainsworth, George Abernethy and others
Route Willamette, Columbia and Lewis and Clark rivers
Maiden voyageFebruary, 1855
Out of service1863
FateDismantled 1863; hull burned for scrap iron, 1865.
General characteristics
Typeinland shallow draft passenger/freighter/towboat
Length115 ft (35 m) measured over hull
Beam18.5 ft (6 m) measured over hull
Depth4.0 ft (1 m) depth of hold
Installed powertwin steam engines, high-pressure, one cylinder each, 12" bore by 48" stroke
Propulsionsternwheelwheels
NotesEngines later installed on sternwheeler Forty-Nine, built in 1865.

Jennie Clark, also seen spelled Jenny Clark, was the first sternwheel-driven steamboat to operate on the rivers of the Pacific Northwest, including British Columbia. This vessel was commonly known as the Jennie when it was in service. The design of the Jennie Clark set a pattern for all future sternwheel steamboats built in the Pacific Northwest and in British Columbia.

Contents

Design and construction

Jacob Kamm and John C. Ainsworth built Jennie Clark at Milwaukie, Oregon in 1855. [1] Jennie Clark was the first sternwheeler built in the Pacific Northwest. [1] [2] [3] The hull and upper works were built at Milwaukie, while her engines were built in Baltimore to Kamm's specifications, for a price of $1,663.16, and shipped around to the West Coast, which cost another $1,030.02. [2]

Kamm and Ainsworth had settled on the sternwheeler as superior to propeller-driven and side-wheel boats. [2] Propellers were too vulnerable to expensive damage to propellers and shafts from rocks and other obstructions in the river. [2] Sidewheelers were too difficult to steer and needed expensive dock facilities. [2] [3]

Jennie Clark was 115 feet (or 118 feet [4] ), measured over the hull, which excluded the extension of the main deck over the stern, which mounted the sternwheel. [1] [5] The width of the vessel, called "beam" was 18.5 feet measured over the hull and excluding the extensions, called the "guards" running along the top of the hull. [1] The depth of hold was 4 feet. [1] The boat was built with a very light draft and was specifically designed for the route on the Willamette river from Portland to Oregon City. [4]

There was a single cabin built on the hull, with the boiler in the middle [2] The passenger cabin was located forward of the boiler, even though Kamm would have preferred the cabin to have been placed somewhere else. [2] On top of the main cabin was the pilot house, from which the vessel was steered. The smokestack was behind the pilot house. [2]

Engineering

Jennie Clark was driven by a sternwheel turned by two horizontally mounted steam engines, which had been manufactured in Baltimore, Maryland. [1] The engines were connected so that one man could operate both. [2]

Each engine had a single piston which measured 12 inches on the inside bore, and drove a piston rod with a stroke of 48 inches. [1] Each piston rod in turn drove a 16-foot-long iron rod called a pitman arm which turned a crank pin on the sternwheel. [2] The sternwheel itself was 15 feet in diameter. [2]

Ownership

Jacob Kamm owned a one-half interest in the steamer, with John C. Ainsworth holding a one-quarter interest, and the firm of Ainsworth & Clark holding the other one-quarter interest. [1] According to another source, the last one-quarter interest was held by two Oregon City merchants, George Abernethy and Ransom Clark. [5] Abernethy, who had been governor of Oregon under the provisional government in the late 1840s, had experience in the steamboat business, having been the Oregon City agent for the Lot Whitcomb, a boat then recently transferred to California from the Willamette river. [6]

Later Kamm sold a three-sixteenths interest to Josiah Myrick, who then took command of the vessel. [1] Ainsworth’s share was then purchased by Theodore Wygant. [1]

Placed in service on the Willamette

Although compared to later steamers, Jennie Clark was a primitive design, the essential features proved to be the model for almost all other steamers later built in the Northwest. [1] [3] The sternwheel design was recognized in March 1855 as superior to the side-wheelers which up until then had been the dominant craft. [7] Jennie Clark could steam up the rapids driven by the sternwheel alone, when the side-wheelers were forced to line through, that is, stop the boat below the rapids, run out a line or a cable to a tree or rock alongside the river, wrap the line around a windlass and crank in the line, drawing the vessel up through the rapids. [7]

In February 1855, two steamboats were running daily between Oregon City, and Portland, the Jennie Clark and the Portland. [8] John C. Ainsworth commanded Jennie Clark at that time. [9] Jennie Clark departed Oregon City for Portland at 8:00 a.m. every day except Sunday, and departed Portland at 2:00 p.m., stopping at intermediate landings. [9] The steamer held a contract to carry the U.S. mail. [9] Persons seeking passage or to ship freight were to apply on board. [9]

In March, Jennie Clark’s competitor, the sidewheeler Portland, was the evening boat from Oregon City to Portland, running under Capt. Alexander S. Murray. [10] By April, 1855, both Jennie Clark and Portland were running on the same schedule, departing Oregon City at 8:00 a.m., and Portland at 2:00 p.m. [11]

Role during the Yakima War

On March 26, 1856, during the Yakima War, the settlements at the Cascades were attacked by Native Americans. [12] The territorial government called up volunteers, and Jennie Clark, under Capt. John C. Ainsworth, carried a company of them from Portland up to the Cascades. [13] [14] Overly apprehensive about ambush, the party sought to protect the captain by lining the interior of the pilot house with three-inch-thick oak planks, and then piling sacks of flour stacked up against the walls. [13]

The Jennie arrived on March 28, 1856. [12] By that time, 350 soldiers and volunteers already on the scene under the command of Lt. Philip Sheridan had defeated and dispersed the Native Americans. [13] Jenny Clark’s company of late-arriving volunteers were greeted with jeers from the troops who had done the fighting. [2]

Jennie Clark then returned to Portland in four hours and 45 minutes, considered remarkable time for the period, with the news, and the volunteer company, whose services were thought to be in need in Portland due to exaggerated fears of a potential attack on that city. [13] [1] [2]

Difficulties in low water

In November 1857 a dry warm spell caused a fall in the level of the Willamette River so that Jennie Clark had to stop at the foot of the Clackamas Rapids. [15] In January 1858, there was talk that the owners of Jennie Clark intended to put a shallow draft boat on the Willamette River that could negotiate the Clackamas Rapids at all times of the year. [16] In the August 1858 low water season, Jennie Clark’s owners placed into service a steam-powered flat boat to transport the Jennie’s freight over the Clackamas Rapids. [17]

In August 1860, low water in the Willamette River forced Jennie Clark, then running under Captain Myrick, to be laid up. [18] The route between Portland and Oregon City was carried on by the steamers Rival and Express. [18]

Towing newly built Carrie Ladd

In October 1858, a new sternwheel steamer, the Carrie Ladd , was completed at Oregon City for Jacob Kamm, John C. Ainsworth, and their associates. On Thursday October 28, 1858, Jennie Clark towed the new steamer downriver to Portland to have the machinery installed. [19]

Collision with Express

On Friday evening, November 16, 1860, at about 6:00 p.m., when running upriver from Portland, at a narrow spot in the river just upstream from Oswego, Jennie Clark collided with the steamer Express. [20] The bow of the Jennie struck right in the middle of the Express cutting halfway through the hull of the Express. [20] The Express was run into the shore, but sank shortly thereafter. [20] The passengers from Express were taken on board the Jennie, which returned to Portland. [20] As of November 24, 1860, efforts to raise Express were underway, and were expected to be successful. [20] Total loss to Express reported to have been estimated at $3,000. [20] Jennie Clark sustained only minor damage. [20]

Service with the Oregon Steam Navigation Company

In 1860, Jennie Clark became one of the initial steamers of the combined firm of Ainsworth, Kamm, and others. [1] This combination was first known as the Union Transportation company. [3] Within a short time, the concern was incorporated as the Oregon Steam Navigation Company which came to have a near-monopoly on river transport on the Columbia, and, for a time the Willamette rivers. [1] [3]

Placement on Longview mail run

Advertisement for Jennie Clark, placed in Washington Standard (Olympia, O.T., June 8, 1861. Jennie Clark ad 1861.png
Advertisement for Jennie Clark, placed in Washington Standard (Olympia, O.T., June 8, 1861.

In May 1861, Jennie Clark was running on a route from Portland to Longview, Washington, which was then known as Monticello. [21] The Express had been originally intended to run on this route, but was prevented from doing so by an accident, apparently the sinking the previous fall. [21] The owners of Jennie Clark held a contract to carry the mails from Portland to Monticello, where they went overland to Olympia. [21] Once Jennie Clark was on the route, mail took 36 hours to reach Olympia from Portland. [21]

In June 1861, Jennie Clark, under Capt. R. Hoyt, left Hoyt’s wharf boat in Portland every morning, except Sundays, at 6:00 a.m. for Longview, carrying the U.S. mail, and stopping at Vancouver along the way. [22] Returning to Portland, Jennie Clark departed Longview at 1:00 p.m. [22] A connection was made every Monday and Thursday at Longview with the sidewheeler Multnomah, under Capt. Ed Giddings, with the mails for Astoria and intermediate points. [22]

Seaside route

In July 1862, Jennie Clark was transferred to a route running to Clatsop Landing on the Lewis and Clark River, and thus became the first of many boats making regular seaside runs from Portland. [1] [3] When the Jenny came downriver from Portland, the boat did not stop at Astoria, as this was already served by daily steamers. [2] Instead, the boat proceeded into Young’s Bay and then up the Lewis and Clark river to Fort Clatsop, where the passengers disembarked. [2] From there, the passengers could walk or hire horses or carriages the short distance to the beach at Seaside. [2] Round trip fare for the seaside run was fifteen dollars. [1] [2]

Removed from service

In 1863, Jennie Clark was removed from service. [1] The engines were removed and sent far up the Columbia River near the Canada-U.S. border, at the 49th parallel, to be placed in the steamer Forty-Nine. [1] [2] [3] In 1865 the hulk of the Jennie Clark was dismantled and the hull burned for the iron. [1]

Notes

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Wright, E.W., ed. (1895). Lewis & Dryden's Marine History of the Pacific Northwest. Portland, OR: Lewis and Dryden Printing Co. pp.  50, 61, 90–91, 109, 126, 139. LCCN   28001147.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Mills, Randall V. (1947). Sternwheelers up Columbia -- A Century of Steamboating in the Oregon Country. Lincoln NE: University of Nebraska. pp. 26–27, 38, 86, 157. ISBN   0-8032-5874-7. LCCN   77007161.
  3. 1 2 3 4 5 6 7 Timmen, Fritz (1973). Blow for the Landing -- A Hundred Years of Steam Navigation on the Waters of the West. Caldwell, ID: Caxton Printers. pp. 9–10, 61–62. ISBN   0-87004-221-1. LCCN   73150815.
  4. 1 2 "From Oregon … A new steamboat called the "Jenny Clark" …". California Farmer and Journal of Useful Sciences. Vol. III, no. 3. San Francisco, CA: Warren & Son. January 18, 1855. p. 22 col. 2.
  5. 1 2 Corning, Howard McKinley (1973). Willamette Landings -- Ghost Towns of the River (2nd ed.). Portland, OR: Oregon Historical Society. p.118. ISBN   0875950426.
  6. "Winter Arrangements: The New Steamer Lot Whitcomb" (PDF). The Columbian. Vol. I, no. 21. Olympia, W.T.: Wiley & McElroy. January 29, 1853. p. 4 col. 1.
  7. 1 2 "The new steamer "Jennie Clark" takes the premium". Oregon Spectator . Vol. 8, no. 1. Oregon City, O.T.: Goodrich, C.L. March 3, 1855. p. 2 col. 1.
  8. "Again the citizens of Oregon City are favored with two boats, daily …". Oregon Spectator . Vol. 7, no. 51. Oregon City, O.T.: Goodrich, C.L. February 17, 1855. p. 2 col. 1.
  9. 1 2 3 4 "U.S. Mail Line … Daily Packet Jennie Clark". Oregon Spectator (advertisement). Vol. 7, no. 52. Oregon City, O.T.: Goodrich, C.L. February 24, 1855. p. 2 col. 4.
  10. "The favorite "Portland", Captain Murray, is still the evening boat …". Oregon Spectator . Vol. 8, no. 1. Oregon City, O.T.: Goodrich, C.L. March 3, 1855. p. 2 col. 1.
  11. "Steamer Portland: Capt. A.S. Murray". Oregon Argus (advertisement). Vol. 1, no. 1. Oregon City, O.T.: Adams, William L. April 21, 1855. p. 3 col. 6.
  12. 1 2 Wilma, David (February 7, 2003). "Native Americans attack Americans at the Cascades of the Columbia on March 26, 1856". historylink.org. Retrieved May 30, 2015.
  13. 1 2 3 4 "Further from Oregon …". Sacramento Daily Union (sourcing Oregon Times). Vol. XI, no. 1578. J. Anthony & Co. April 16, 1856. p. 2.
  14. "Sheridan's First Battle: An Encounter with Indians on the Columbia River — A Recent Visit to the Scene". Idaho Semi-Weekly World (reprint from Portland Oregonian dated September 2, 1875). Vol. 1, no. 76. Idaho City, I.T.: Boyakin, A.J. October 5, 1875. p. 1 col. 5.
  15. "The rainy season has again set in after a dry spell …". The Oregon Argus. Vol. III, no. 33. Oregon City, O.T.: Adams, William L. November 28, 1857. p. 2 col. 3.
  16. "We learn that the present owners of the Jennie Clark …". The Oregon Argus. Vol. III, no. 39. Oregon City, O.T.: Adams, William L. January 9, 1858. p. 2 col. 3.
  17. "The steam flatboat belonging to the Jennie Clark …". The Oregon Argus. Vol. IV, no. 18. Oregon City, O.T.: Adams, William L. August 14, 1858. p. 2 col. 6.
  18. 1 2 "Laid Up. — The steamer Jennie Clark …". The Oregon Argus. Vol. VI, no. 18. Oregon City, OR: Adams, William L. August 11, 1860. p. 2 col. 2.
  19. "New Steamer". Daily Alta California (sourcing from Portland Oregonian). Vol. X, no. 302. San Francisco, CA: Frederick MacCrellish & Co. November 3, 1858. p. 1 col. 1.
  20. 1 2 3 4 5 6 7 "The Express Sunk". The Oregon Argus. Vol. VI, no. 33. Oregon City, OR: Adams, William L. November 24, 1860. p. 2 col. 3.
  21. 1 2 3 4 "The Mails — We are pleased to learn …". Washington Standard. Vol. I, no. 27. Olympia, W.T.: Murphy, John M. May 18, 1861. p. 2 col. 2.
  22. 1 2 3 "U.S. Mail. Ho! For the Mines! Portland Monticello and Astoria". Washington Standard (advertisement). Vol. I, no. 30. Olympia, W.T.: Murphy, John M. June 8, 1861. p. 3 col. 4.

Related Research Articles

<span class="mw-page-title-main">Jacob Kamm</span>

Jacob Kamm was a prominent early transportation businessman in Oregon, USA.

<i>Gazelle</i> (1854 sidewheeler) American ship

Gazelle was an early sidewheeler on the Willamette River in what is now the U.S. state of Oregon. She did not operate long, suffering a catastrophic boiler explosion on April 8, 1854, less than a month after her trial voyage. This was the worst such explosion ever to occur in the Pacific Northwest states. The wrecked Gazelle was rebuilt and operated for a few years, first briefly as the unpowered barge Sarah Hoyt and then, with boilers installed, as the steamer Señorita. A victim of the explosion was D.P. Fuller, age 28, who is buried in Lone Fir Cemetery in Portland, Oregon.

<i>Carrie Ladd</i>

The Carrie Ladd was an important early steamboat on the lower Columbia and lower Willamette rivers. The vessel established the basic design of the Columbia River steamboat, which was later used throughout the Pacific Northwest, British Columbia, Alaska, and the Yukon.

<i>Washington</i> (steamboat 1851)

Washington was an early steamboat operated in the states of California and Oregon. Washington was built in California and was initially operated on the Sacramento River. In 1851, the steamer was purchased and brought on a ship to the Oregon Territory, where it was operated on the Willamette River until the summer of 1853. Washington was sold again, and then transferred to the Oregon coast, where it operated on the Umpqua River, on the Coquille River and on Coos Bay. Washington was able to operate for shorter distances over the open ocean along the Oregon coast. The steamer was wrecked by a boiler explosion in December 1857, near Scottsburg, O.T., on the Umpqua river.

<i>Elk</i> (sternwheeler 1857)

Elk was a stern-wheel driven steamboat built on the Willamette River in 1857 at Canemah, Oregon. This steamboat is chiefly remembered for its destruction by a boiler explosion in which by good fortune no one was seriously hurt. A folklore tale later arose about this disaster.

<i>Elwood</i> (sternwheeler) Steamboat

Elwood was a sternwheel steamboat which was built to operate on the Willamette River, in Oregon, but which later operated on the Lewis River in Washington, the Stikine River in Canada, and on Puget Sound. The name of this vessel is sometimes seen spelled "Ellwood". Elwood is probably best known for an incident in 1893, when it was approaching the Madison Street Bridge over the Willamette River in Portland, Oregon. The bridge swung open to allow the steamer to pass. However, a streetcar coming in from the east end of the bridge failed to notice the bridge was open, and ran off into the river in the Madison Street Bridge disaster.

<i>Portland</i> (sidewheeler 1853)

Portland was a side wheel steamer built at Portland, Oregon in the summer of 1853. This vessel was chiefly remembered for its dramatic destruction in 1857 by being washed over Willamette Falls, an incident which killed its captain and a deckhand. The death of the captain, Arthur Jamieson, was one of at least four brothers, all steamboat officers, who were killed in three separate steamboating accidents occurring between 1857 and 1861 in Oregon and in British Columbia.

<i>Black Hawk</i> (steamboat)

Black Hawk was one of three small iron-propeller driven steamboats manufactured in Philadelphia in about 1850 and shipped to the west coast of United States to be placed in river service. The other boats were Eagle and Major Redding. These boats were some of the earliest steamers to operate on the Willamette and Columbia rivers. They could carry about 12 passengers and perhaps a ton of cargo. The boats had to be small to make the run to Oregon City, which passed through the Clackamas rapids a short distance downriver from the town.

<i>Wallamet</i> (1853 sidewheeler)

Wallamet was a sidewheel-driven steamboat that operated on the Willamette and Columbia rivers in Oregon and later on the Sacramento and San Joaquin rivers in California. Built in a Mississippi river style that was not suited to the conditions of these rivers, and suffering from construction defects, Wallamet was not a financially successful vessel. The name of this vessel is often seen spelled as Willamette.

<span class="mw-page-title-main">Upper Willamette Transportation Line</span>

The Upper Willamette Transportation Line was a line of four inland steamboats that operated from the fall of 1859 to the summer of 1860 on the upper Willamette River in the state of Oregon, United States.

<i>James Clinton</i> (sternwheeler)

James Clinton was a steamboat which operated on the upper Willamette River from 1856 to 1861. Although the Clinton was said to have been "not a very good boat.", it was the first steamer ever to reach Eugene, Oregon. James Clinton was destroyed in April 1861, when a large fire broke out at Linn City, Oregon in a shoreside structure near to where the vessel was moored.

<i>Wenat</i> (sternwheeler)

Wenat was a stern-wheel steamboat that, under the name Swan, was built and operated, briefly, on the Tualatin River, in the state of Oregon. In 1858, Swan was sold, moved to the lower Willamette River, renamed Cowlitz, and placed on a route between Portland, Oregon the Cowlitz River.

<i>Dayton</i> (sternwheeler)

Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.

<i>Relief</i> (sternwheeler 1858)

Relief was a stern-wheel driven steamboat that operated on the Willamette River from 1858 to 1865. Relief ran for a short time on the route from Portland to Oregon City, Oregon. After being bought out by the competition, Relief was lined around Willamette Falls to the upper Willamette, where it became the first steamboat to reach Springfield. This vessel should not be confused with a later vessel, also named Relief, which operated on the Columbia and Lewis rivers from 1906 to 1931.

<i>Orient</i> (sternwheeler)

Orient was a light-draft sternwheel-driven steamboat built in 1875 for the Willamette River Transportation Company, a concern owned by pioneer businessman Ben Holladay. Shortly after its completion, it was acquired by the Oregon Steam Navigation Company. Orient was a near-twin vessel of a steamer built at the same time, the Occident.

<i>Mascot</i> (sternwheeler) Sternwheel-driven steamboat

Mascot was a sternwheel-driven steamboat built in 1890 which operated primarily on a route running from Portland, Oregon down the Willamette and Columbia rivers to points on the Lewis and Lake rivers. Points served included the town of Woodland, Washington, on the main branch of the Lewis, and La Center, Washington on the east fork.

<i>Governor Newell</i> (sternwheeler)

Governor Newell was a sternwheel-driven steamboat that operated from 1883 to 1902 in the Pacific Northwest.

<i>Clara Parker</i> (sternwheeler)

Clara Parker was a sternwheel-driven steamboat which was operated on the lower Columbia and lower Willamette rivers in the 1880s. The steamer ran for about ten years out of Astoria, Oregon in towing and jobbing work. In 1890 Clara Parker was rebuilt and renamed Astorian.

<i>Undine</i> (Columbia River sternwheeler) American passenger steamboat

Undine was a sternwheel-driven steamboat that operated from 1887 to 1935 on the Columbia and lower Willamette rivers. From 1935 to 1940 the same vessel was operated under the name The Dalles.

<i>Mountain Gem</i> (sternwheeler) American steamboat

Mountain Gem was a sternwheel-driven steamboat that operated on the Snake and Columbia rivers from 1904 to 1912, when the machinery was removed and installed in a different, newly built steamboat. Mountain Gem remained on the U.S. merchant vessel registry until 1922 or later. Although Mountain Gem was not abandoned until 1924, there is no evidence it was used after 1912.

References

Books

On line historic newspaper collections