Steamboat Inspection Service (1871–1932) Bureau of Navigation and Steamboat Inspection (1932–1936) Bureau of Marine Inspection and Navigation (1936–1946)
The Steamboat Inspection Service was a United States agency created in 1871 to safeguard lives and property at sea. It merged with the Bureau of Navigation in 1932 to form the Bureau of Navigation and Steamboat Inspection, which in 1936 was reorganized into the Bureau of Marine Inspection and Navigation. The Bureau of Marine Inspection and Navigation's responsibilities were transferred temporarily to the United States Coast Guard in 1942. The Bureau was abolished in 1946, when its functions were transferred permanently to the Coast Guard.
The safety inspection of merchant vessels documented under the flag of the United States has been authorized in varying degrees by Congress and required by law since 1838. In the early days, the United States Congress hesitated to pass adequate safety laws for fear of interfering with the growing and economically important steamboat industry.
The beginning and development of a federal maritime safety program arose from disasters that caused much death, injury and property loss; experience showed the greatest casualties were caused by boiler explosions and by fire aboard ship. As the steamboat industry grew, so did the general public's awareness of the need for marine safety laws. The public's growing concern over these maritime accidents prompted Congress to begin to act to protect the public, beginning with passing a law on July 7, 1838, to "provide better security of the lives of passengers on board of vessels propelled in whole or in part by steam" (5 Stat. L., 304). The law required owners or masters of vessels propelled in whole or in part by steam to obtain two certificates from appointed inspectors and provide one certificate to a customs official (surveyor or collector) to obtain a license and to be registered. The inspectors were to be chosen and sworn to their duty by the district court judge. Inspections were required to be repeated every 12 or 6 months as outlined in the law.[1][2]
Steamboat accidents 1830 to 1840
Captain Edward Tripp, who had introduced steamboating to Baltimore, Maryland, in 1813 with the building of the steamboat Chesapeake, was the first Baltimore hull inspector and was appointed by a federal district judge to perform the safety inspection on the few vessels in Baltimore. Captain Tripp performed these duties between 1838 and 1852. At that time, the law provided a US$5.00 fee for each inspection to be paid by the vessel's owner.
Steamboat Act of August 30, 1852
The 1838 law proved inadequate as steamboat disasters increased in volume and severity. The period from 1847 to 1852 was marked by an unusual series of disasters primarily caused by boiler explosions; however, many were also caused by fires and collisions. These disasters resulted in the passage of the Steamboat Act of August 30, 1852 (10 Stat. L., 1852) in which enforcement powers were placed under the United States Department of the Treasury, rather than under the United States Department of Justice as with the Act of 1838. The important features of the Steamboat Act were the requirement for hydrostatic testing of boilers and the requirement for a boiler steam safety valve. The act further required that both pilots and engineers be licensed by the local inspectors.
Under the Steamboat Act, the organization and form of a federal maritime inspection service began to emerge. Nine supervisory inspectors, each responsible for a specific geographic region, were appointed. There were also provisions for the appointment of local inspectors by a commission consisting of the local district collector of customs, the supervisory inspector, and the district judge.
Time and further insight proved the Steamboat Act inadequate. Probably its most serious shortcoming was the exemption of freightboats, ferries, tugboats, and towboats, which continued to operate under the superficial inspection requirements of the Act of 1838. However, the Steamboat Act was the beginning of legislation that would lead a federal inspection service.
Act of February 28, 1871, and the creation of the Steamboat Inspection Service
Continued disasters and high loss of life again prompted congressional action through the passage of the Act of February 28, 1871. This new law applied to all steam vessels and sought to protect their crews as well as their passengers. It retained the useful functions of the Act of 1838 and the Steamboat Act and added new requirements that provided a comprehensive Marine Safety Code, which forms the basis of the present marine safety code.
The Act of 1871 created the Steamboat Inspection Service. Furthermore, it established a Supervisory Inspector General directly responsible to the United States Secretary of the Treasury, extended licensing requirements to all masters and chief mates, provided for the revocation of licenses, authorized periodic inspection, and gave the Board of Supervisory Inspectors the authority to prescribe nautical rules of the road.
On June 30, 1932, Congress passed a law (47 Stat. L., 415) under which the Steamboat Inspection Service lost its independent identity and was merged with the Bureau of Navigation, which had been created in 1884 to oversee the regulation of merchant seamen. The merger formed the new Bureau of Navigation and Steamboat Inspection. The new organization remained within the Department of Commerce.
Act of May 27, 1936 (Public Law 622)
The Morro Castle fire off the coast of New Jersey in 1934, which killed 124 people, paved the way for the Act of May 27, 1936. The law, known as Public Law 622, reorganized the Bureau of Navigation and Steamboat Inspection and renamed it the Bureau of Marine Inspection and Navigation (49 Stat. L., 1380). The Bureau remained under Department of Commerce control. Public Law 622 also required structural fire protection on passenger vessels and required plans for passenger vessels be approved by the Bureau prior to any vessel's construction.
Motorboat Act of 1940
The Motorboat Act of 1940 was enacted to cover safety requirements for every vessel propelled by machinery and not more than 65 feet (20 meters) in length, with the exception of tugboats and towboats of this length propelled by steam, which were covered under other laws. In addition to covering safety equipment, running lights, and reckless or negligent operations, this law gave the Bureau of Marine Inspection and Navigation the authority to examine the operators of these boats and issue licenses provided they carried passengers for hire.
On July 16, 1946, Reorganization Plan Number 3 abolished the Bureau of Marine Inspection and Navigation and transferred all of its functions permanently to the U.S. Coast Guard. This marked the first time in the nation's history that all functions of maritime safety came under one agency.
Due to an increase in small boat accidents, the Small Passenger Vessel Act of May 10, 1956, was passed into law. The requirements of this act became effective on June 1, 1958, and provided that all vessels, regardless of size or propulsion, carrying more than six passengers for hire, be inspected by a Marine Inspector of the Coast Guard, and meet associated safety requirements. These requirements not only cover life saving and fire fighting equipment, but also machinery and electrical installations, hull strength and stability considerations. This law required that operators be licensed by the Coast Guard and minimum manning requirements be met. Additionally, the route or routes on which the vessel may operate and the maximum number of passengers that may be carried are established by the Coast Guard.
Summary history
Predecessor agencies to the Bureau of Marine Inspection and Navigation:
In the Department of the Treasury:
Steamboat Inspection Service (1871–1903)
Bureau of Navigation (1884–1903)
In the Department of Commerce and Labor:
Steamboat Inspection Service (1903–1913)
Bureau of Navigation (1903–1913)
In the Department of Commerce:
Steamboat Inspection Service (1913–1932)
Bureau of Navigation (1913–1932)
Bureau of Navigation and Steamboat Inspection (1932–1936)
The Philippine Coast Guard (PCG) is the third armed uniformed service of the country attached to the Philippines' Department of Transportation, tasked primarily with enforcing laws within Philippine waters, conducting maritime security operations, safeguarding life and property at sea, and protecting marine environment and resources; similar to coast guard units around the world. In case of a declaration of war, the Coast Guard shall also serve as an attached service of the Department of National Defense.
The Bureau of Navigation, later the Bureau of Navigation and Steamboat Inspection and finally the Bureau of Marine Inspection and Navigation — not to be confused with the United States Navy's Bureau of Navigation — was an agency of the United States Government established in 1884 to enforce laws relating to the construction, equipment, operation, inspection, safety, and documentation of merchant vessels. The bureau also investigated marine accidents and casualties; collected tonnage taxes and other navigation fees; and examined, certified, and licensed merchant mariners.
The United States Coast Guard is the coastal defense, search and rescue, and maritime law enforcement branch of the United States Armed Forces and is one of the country's eight uniformed services. It carries out three basic roles, which are further subdivided into eleven statutory missions. The three roles are:
Marine safety is one of the eleven missions of the United States Coast Guard.
The National Cargo Bureau (NCB) a not-for-profit marine surveying organization charged with assisting the U.S. Coast Guard with carrying out the provisions of the International Convention for the Safety of Life at Sea. The NCB was formed by a group of marine underwriters and the Coast Guard for the purpose of reducing losses of grain ships. Any ship loading grain in the US sailing for a foreign port must have a certificate issued by the NCB in order to sail( See U.S. Coast Guard Navigation and Vessel Inspection Circular No. 5-94 - NVIC 05-94 ). The NCB acts with and enforces the regulations of the Coast Guard in this area. Grain ships have unique stability issues and are prone to capsize if loaded improperly. Headquartered in New York City, the NCB has offices throughout United States.
Sector Commander is the position title of the commanding officer of a United States Coast Guard Sector, usually of the rank of Captain (O-6). The Sector Commander's second-in-command is the Deputy Sector Commander. Also reporting directly to the Sector Commander are the Command Master Chief (CMC), the Senior Reserve Officer, and the Sector's Auxiliary Coordinator.
A Sector is a shore-based operational unit of the United States Coast Guard. Each Sector is responsible for the execution of all Coast Guard missions within its Area of Responsibility (AOR), with operational support from Coast Guard Cutters and Air Stations. Subordinate commands within a Sector typically include Stations and Aids-to-Navigation (ATON) Teams. Some Sector commands also have subordinate units such as Sector Field Offices and Marine Safety Units that are responsible for mission execution in parts of the Sector's AOR. There are 37 sectors within the Coast Guard.
The federal government of the United States empowers a wide range of federal law enforcement agencies to maintain law and public order related to matters affecting the country as a whole.
SS Governor Cobb was an American coastal passenger steamboat built in 1906. The ship has the double distinction of being not only the first American-built ship to be powered by steam turbines, but also, late in her career, of becoming the world's first helicopter carrier.
The Seaman's Manslaughter Statute, codified at 18 U.S.C. § 1115, criminalizes misconduct or negligence that result in deaths involving vessels on waters in the jurisdiction of the United States.
Sue H. Elmore was a steamboat built for service on the coast of Oregon and southwest Washington. From 1900 to 1917, the vessel's principal route ran from Portland, Oregon down the Columbia River to Astoria, and then west across the Columbia Bar, then south along the Oregon coast to Tillamook Bay. Once at Tillamook Bay, Sue H. Elmore was one of the few vessels that could reach Tillamook City at the extreme southern edge of the mostly very shallow bay. After this Sue H. Elmore was sold, being operated briefly in Puget Sound under the name Bergen, and then for many years, out of San Diego, California as a tugboat under the name Cuyamaca. During World War II Cuyamaca was acquired by the U.S. Army which operated the vessel as ST-361. Afterwards the army sold ST-361 and the vessel returned to civilian ownership, again under the name Cuyamaca. In 1948 Cuyamaca sank in a harbor in Venezuela, but was raised and by the early 1950s, was owned by one A. W. Smith, of Pensacola, Florida. This vessel's former landing place in Tillamook, Oregon is now a municipal park named after the ship.
The Oronoco was a steamboat that operated in the 1830s. It carried passengers and goods along the Mississippi River. On the morning of April 12, 1838, captained by John Crawford, The Oronoco, anchored in the river just across from the town of Princeton about 100 mi (160 km) north of Vicksburg. The steamboat stopped with the intention of picking up more passengers.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
