Governor Grover in Willamette Locks, March 1873, shortly after completion of locks | |
Name | Governor Grover |
Owner | Willamette River Navigation Co., Willamette Falls Locks and Canal Co. [1] |
Route | Willamette River [1] |
Launched | 1873, at Portland, Oregon [2] |
Identification | US registry # 85249 |
Fate | 1880 Dismantled |
Type | shallow draft inland passenger/freighter |
Tonnage | 404 gross [3] |
Length | 140 ft (42.7 m) [1] [4] |
Beam | 28.6 ft (8.7 m) [1] |
Depth | 5.5 ft (1.7 m) depth of hold |
Installed power | twin steam engines, horizontally mounted, 19 in (48 cm) bore x 60 in (150 cm) stroke 17 net horsepower. nominal [1] |
Propulsion | sternwheel [2] |
Governor Grover was a sternwheel steamboat that ran on the Willamette River during the 1870s. Because of the completion of the Willamette Locks in late 1872, it was possible for vessels such as Governor Grover to be built in Portland, Oregon and then readily navigate the Willamette above Willamette Falls.
Governor Grover was built in 1873 for the Willamette River Navigation Company [5] which had been formed to compete with the monopoly on the river that was then held by the People's Transportation Company, which by 1873 had come under the control of steamboat and stagecoach magnate Ben Holladay. Among the backers of the Willamette River Navigation Company were the important businessman Bernard Goldsmith and the steamboat men Jacob Kamm and Joseph Kellogg, with the latter supervising construction of the Grover. [2] [6] Grover was named after La Fayette Grover (1823-1911) fourth governor of the state of Oregon (1870-1877). Other vessels built by the Willamette River Navigation Company included the sternwheelers Vancouver (1870), Beaver (1873), and Willamette Chief (1874).
Grover was launched on January 28, 1873, and made her first trip on March 16, 1873. Officers at first were Charles Holman, Captain, George Marshall, chief engineer, and A. Vickers and Charles Kellogg, pilots. [6] Shortly after construction Governor Grover passed into the ownership of the Willamette Falls Locks and Canal Company. Governor Grover worked on the Willamette River and, on March 18, 1873, was the first large vessel to go as far upriver as Harrisburg. [2] [6] Grover achieved some success in driving down rates, and became popular among the farmers of the Willamette Valley. [7]
In 1874 Capt. Holman was succeeded in command by Capt. James Wilson, who remained with the vessel for several years. [6] The Willamette Falls Locks and Canal Company sold Grover to the Oregon Steam Navigation Company, which worked the vessel on all routes running out of Portland, Oregon. [6]
In 1880, Governor Grover was dismantled at Portland, Oregon. [1]
Onward was an early steamboat on the Willamette River built at Canemah, Oregon in 1858. This vessel should not be confused other steamboats named Onward, including in particular the Onward of 1867, a similar but somewhat smaller vessel built at Tualatin Landing, which operated on the Tualatin River under Capt. Joseph Kellogg.
Echo was a sternwheel steamboat that operated on the Willamette River from about 1865 to 1873 and was one of the first steamboats to carry what was then considered a large cargo out of Eugene, Oregon.
The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.
The Multnomah was one of the first steamboats to operate on the Willamette and Yamhill rivers. This vessel should not be confused with the Multnomah, a steamboat built in Portland, Oregon in 1885, which was larger and of a much different design.
The steamboat Shoalwater was the sixth steamer to operate on the upper Willamette River, which refers to the part of the river above Willamette Falls at Oregon City. In a short career of six years, Shoalwater was renamedFenix, Franklin, and Minnie Holmes. Shoalwater was the first steamboat in Oregon to suffer a boiler explosion, although no fatalities resulted.
Rival was a sternwheel steamboat that ran on the Willamette River between Oregon City and Portland, Oregon from 1860 to 1868. Rival was intended to be a boat which would promise low fares in an effort to beat a steamboat monopoly which was then in formation.
Elk was a stern-wheel driven steamboat built on the Willamette River in 1857 at Canemah, Oregon. This steamboat is chiefly remembered for its destruction by a boiler explosion in which by good fortune no one was seriously hurt. A folklore tale later arose about this disaster.
The People's Transportation Company operated steamboats on the Willamette River and its tributaries, the Yamhill and Tualatin rivers, in the State of Oregon from 1862 to 1871. For a brief time this company operated steamers on the Columbia River, and for about two months in 1864, the company operated a small steamer on the Clackamas River.
Shoo Fly was a sternwheel-driven steamboat that operated on the Willamette and Columbia rivers in the 1870s. Originally built as primarily as a freight boat, the vessel was used in other roles, including towing and clearing of snags. Shoo Fly inspired the name of another sternwheeler on the Willamette River, Don't Bother Me.
The Upper Willamette Transportation Line was a line of four inland steamboats that operated from the fall of 1859 to the summer of 1860 on the upper Willamette River in the state of Oregon, United States.
James Clinton was a steamboat which operated on the upper Willamette River from 1856 to 1861. Although the Clinton was said to have been "not a very good boat.", it was the first steamer ever to reach Eugene, Oregon. James Clinton was destroyed in April 1861, when a large fire broke out at Linn City, Oregon in a shoreside structure near to where the vessel was moored.
Oregon was a side-wheel driven steamboat that operated on the Willamette River in the state of Oregon from 1852 to 1854. The steamer was not economically successful and became a total loss by sinking after a short career.
Wenat was a stern-wheel steamboat that, under the name Swan, was built and operated, briefly, on the Tualatin River, in the state of Oregon. In 1858, Swan was sold, moved to the lower Willamette River, renamed Cowlitz, and placed on a route between Portland, Oregon the Cowlitz River.
Minnehaha was a sternwheel-driven steamboat which was built in 1866 on Oswego Lake, then known as Sucker Lake, in Oregon, United States. Minnehaha was later transferred to the Willamette and Columbia rivers where it operated for the first part of the 1870s.
Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.
Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.
Onward was a stern-wheel driven steamboat that operated on the Tualatin River from 1867 to 1873, on Sucker Lake, now known as Oswego Lake, from 1873 to 1874, on the Cowlitz and Lewis rivers. This vessel should not be confused with the similar sternwheeler Onward built in 1858 at Canemah, Oregon and dismantled in 1865.
Occident was a steamer that operated on the Willamette River and occasionally its tributary, the Santiam River from 1875 to about 1890. Occident was designed primarily for freight work, and did not have passenger accommodations. This Occident should not be confused with the smaller steam launch Occident, apparently propeller-driven, which operated out of Astoria, Oregon in the 1890s.
Active was a stern-wheel driven steamboat that operated on the upper Willamette River from 1865 to 1872. During its short operational life, Active was owned by several different steamboat companies. It was dismantled in 1872 at Canemah, Oregon.
Fanny Patton was a stern-wheel driven steamboat that operated on the Willamette River, in Oregon, starting in August 1865. This steamer operated from 1865 to 1880 for various owners, and was a considered a profitable vessel. The steamer was named for the daughter of businessman Edwin N Cook, Frances Mary "Fannie" Cooke (1837–1886). Edwin N. Cook was one of the principals of the People's Transportation Company.
Wikimedia Commons has media related to Governor Grover (sternwheeler) . |