Bonita (1900 sternwheeler)

Last updated
Bonita in Yamhill river lock 1900.jpg
Bonita at the opening of the Yamhill River lock and dam, September 24, 1900
History
NameBonita (1900–1902); Metlako (1902–1924); B. H. Smith Jr. (1924–1931)
Route Willamette, Yamhill, Columbia, Cowlitz, Lewis and Lake rivers
BuilderJohnston boatyard
Completed1900, at Portland, Oregon.
Out of service1931
IdentificationU.S. #3830
FateAbandoned.
General characteristics
Typeriverine passenger/freight
Tonnage198 gross; 122 net tons.
Length109 ft (33.2 m) measured over hull.
Beam24.4 ft 9 in (7.7 m) measured over hull.
Depth4.8 ft 0 in (1.46 m)
Installed powertwin steam engines, horizontally mounted, single cylinder, cylinder bore 9 in (23 cm) and stroke of 4 ft (1.22 m).
Propulsionsternwheel
Capacity200 passengers; 125 tons of freight

Bonita was a steamboat which operated on the Willamette and Yamhill rivers. This boat was renamed Metlako in 1902, and operated under that name until 1924 on the Columbia River and its tributaries, the Cowlitz, Lewis and Lake rivers. In 1924, Metlako was renamed B. H. Smith Jr., operating under that name until 1931, when the steamer was abandoned. As Bonita, in September 1900, this vessel was the first steamer to pass through the Yamhill locks.

Contents

Design, construction and dimensions

Bonita was built specifically to run from Portland to McMinnville, Oregon. [1] According to one source, Bonita was built for Captain Hosford by the Johnston boatyard on the east side of Portland, Oregon. [2] [3] According to another (non-contemporaneous) source, Bonita was built by Robert Green for Bucham & Burns Construction. [4]

Reportedly Bonita was built for the run from Portland to Lacamas Lake near Camas, Washington, but the boat's owner, Captain Hosford, was considering placing the vessel on the route to Dayton, Oregon, along the Willamette and Yamhill rivers. [3]

Bonita was 109 ft (33.2 m) measured over the hull. [5] Measurements over the hull excluded the length of hull extensions, such as the projection of the main deck over the stern, called the "fantail", to mount the sternwheel. The Bonita had a beam (width) of 24.4 ft 9 in (7.7 m), again measured over the hull and exclusive of projections along the top of the hull, called the guards. [5] The vessel's depth of hold was 4.8 ft 9 in (1.7 m). [5]

A vessel's overall size was measured in tons, which was a unit of volume and not of weight. Bonita was 198 gross tons and 122 net tons. [5] Each steamer in commercial service at that time had an official steamboat registry number. For Bonita, the official merchant vessel registry number was 3830. [5]

Bonita was expected to carry 200 passengers and 125 tons of freight. [2] Power to the stern-wheel was furnished by twin steam engines, horizontally mounted, single cylinder, cylinder bore 9 in (23 cm) and stroke of 4 ft (1.22 m). [4] These engines generated 5 nominal horse power. [4]

Operations as Bonita

Advertisement for excursion on Bonita to Oregon City. High dive and steamer excursion ad Oregon 1900.png
Advertisement for excursion on Bonita to Oregon City.

Bonita was launched on the morning of March 28, 1900. [3]

Hosford took Bonita on a trial run on Saturday, April 14, 1900, and the vessel ran well. [2] Full completion of the vessel was expected by the evening of April 17, 1900. [2] On Sunday, April 22, 1900, an excursion on Bonita was advertised, to run from Portland to Oregon City, to see Captain Edward Morey, billed as the "champion high diver of America" dive 80 feet off the Oregon City suspension bridge. [6] Round trip fare was 40 cents. [6] The next Sunday, April 29, 1900, Bonita ran an excursion to Vancouver, Washington, again to see Captain Morey dive, this time from a tower 90 feet high. [7]

In 1900, Bonita ran daily from McMinnville to Portland, leaving every morning. [1] The boat remained two hours in Portland, then returned to McMinnville. [1] The rates charged by the steamer were lower than the rates charged by the railroad. [1] Soon after Bonita began the McMinnville route, the railroad lowered its rates to compete and improved its service. [1] The railroad, which also controlled the steamship dock in Portland, refused to allow Bonita to use the dock, thus increasing drayage fees for the steamer. [1] The railroad won back the shippers, and Bonita was forced off the route. [1]

Carriage of hop pickers

In early September 1900, Bonita carried hop pickers from Portland to hops yards in the Willamette Valley, departing daily from Portland at 1:30 pm. [8]

Collision with Pomona

On October 22, 1900, Bonita collided with the steamer Pomona as both vessels were entering the Willamette Falls Locks. [9] There was no loss of life or damage to cargo. [9] Bonita sustained $200 worth of damage. [9] The steamboat inspection service investigated the incident on November 5, 1900. [9] As a result, the license of A.J. Spong, master of Pomona, was suspended for 10 days for carelessness and negligence in handling his vessel. [9]

Stranded on Yamhill Bar

In July 1901 as Bonita was lining across the bar of the Yamhill river, the capstan gave way, throwing one man into the river, and striking several others, but without causing serious injury. [10] Bonita was stuck for most of a day, until the steamer Altona happened along and pulled Bonita off the shoal. [10] The next day, Bonita successfully transited the Yamhill bar heading upriver, but when the steamer was on the other side of the bar, the river water fell, leaving Bonita trapped behind the bar. [10]

Bonita's captain sought assistance from the local road crew, which put to work carving out with a road scraper a channel in the bar, reportedly just big enough for Bonita to pass through. [10] Said the Morning Oregonian of this incident: "It is further proposed that she be renamed the Gopher and equipped with a plow or two and a few agricultural huskies as assistant engineers. With a bucket of water and a road-scraper the Bonita could go overland to Kansas or anywhere." [10]

Transport of hop pickers

Bonita carried hop pickers in the 1901 picking season, departing from the foot of Washington street at 7:00 am daily for the hop fields. [11]

Operations as Metlako

Metlako, at the Cowlitz River levee, circa 1923 Metlako steamer circa 1923.jpg
Metlako, at the Cowlitz River levee, circa 1923

On Saturday, March 15, 1902, the White Collar Line (also known as the Regulator Line) acquired Bonita for the run from Portland to The Dalles, Oregon. [12] On this run, Bonita was to alternate with the White Collar line's steamer Tahoma. [13]

On April 10, 1902, the new owners changed the name of the vessel to Metlako, a name derived from a Native American legend. [13] Reportedly when Bonita was renamed, the vessel "received improvements which made her practically a new boat." [14]

Placed on Columbia River route

In late April 1902, Metlako ran from Portland to The Dalles, Oregon every Tuesday, Thursday, and Saturday, departing from the Regulator Line's dock at the foot of Alder Street at 7:00 a.m. [15] Metlako departed The Dalles on the return trip to Portland every Monday, Wednesday, and Friday, at 7:00 a.m. [15]

On the morning of May 3, 1902, en route to The Dalles, about five miles upriver from Vancouver, a cylinder head blew out on Metlako, seriously (or slightly [16] injuring a passenger. [17]

Sold to Seattle, Portland & Spokane Railway

The Regulator Line sold Metlako to the Seattle, Portland & Seattle Railway. [18]

At about noon on January 27, 1903, Peter Gearin, a crewman on Metlako, either leaped or fell off the boat into the Columbia River and was drowned. [19] The incident occurred at Reed's Island in the Columbia River, as Metlako was steaming upstream from Vancouver, where Gearin had boarded the vessel. [19] Gearin was seen to dive off the companionway into the river, but whether it was suicide or an accidental loss of footing, could not be determined. [19] The boat stopped to look for him, but no trace could be located, so Metlako continued on its way. [19] Gearin, age 38, had been working on steamboats for about 15 years. [19]

Captain Johnnie Brown had been master of Metlako for several years. [18] In October 1910, Capt. Charles Jordan took over as captain of Metlako from Capt. G.F. Gildez. [20] In May 1908, Metlako was engaged as a tender for the construction of the Columbia River Railroad Bridge, and had been so since the start of bridge construction. [18] [21]

Cowlitz, Lewis, and Lake river service

Once construction of the railroad bridge was complete, Metlako was tied up at Vancouver until December, 1908, when the Spokane, Portland & Seattle Railway sold the vessel to Albert Burcham, of Kelso, Washington. [18] Burcham intend to use Metlako on the Cowlitz and Columbia rivers in the logging business. [18]

Reconstruction

Metlako was rebuilt in 1909 at Kelso, Washington, by Robert Green for Burcham & Burns Construction. [4] In 1907, prior to reconstruction, Metlako was 198 gross and 122 registered tons, the same as Bonita when constructed. [22] The total crew required for Metlako was 13, as shown on the 1907 merchant vessel register. [22] After reconstruction, in 1909, Metlako measured out at 91 gross and 87 registered tons. [23] The total required crew was reduced from 13 to 6. [23] The length and beam of the vessel remained the same, indicating that the reduction in size was attributable to removal of a large part of the cabin structure. [23]

Operations following reconstruction

In February 1915, as Metlako was being overhauled in Portland, there was talk on the waterfront that it would be placed on the Portland-Lewis River route. [24] In early July 1916, high water on the Columbia river backed up the Lake River to Ridgefield, Washington, which was served by the steamers Metlako and Mimare. [25] In 1919, A.E. Hayes, of Kelso, Washington, rebuilt Metlako and ran it for a short time on the Portland-Kelso route. [26]

In March 1920, Metlako was tied up at a dock in Kelso, Washington, because of legal claims pending against the vessel in federal court in Tacoma, Washington. [26] The claims arose from an action filed by the Union Oil Company, alleging that they were owed $1,070.65 for fuel supplied to Metlako. [27]

On April 26, 1920, Metlako was sold by the U.S. Marshal for $5,200 to Captain Caples, of Woodland, Washington and associates. [26] Another source states that Walker & Co. bought the vessel at the marshal's sale. [28] In February 1921, Walker & Co. sold Metlako to E.E. Graham & Co. [28]

Sinking filmed

The sinking of the Metlako was filmed on motion picture camera and made into part of a newsreel which was exhibited in August, 1921. [29]

Operations as B. H. Smith Jr.

In January 1923, E.E. Graham & Co. sold Metlako to Long-Bell Lumber Co. [28] [30] The new owners intended to use the vessel to tow barges and other craft. B. H. Smith Jr. was much smaller than Metlako, with the Smith measuring out at 97 gross and 81 registered tons. [4] [30]

On April 25, 1924, the name of the vessel was changed to B. H. Smith Jr., after the assistant general manager of Long-Bell Lumber Co. [28] Long-Bell Lumber Co. had its headquarters in Longview, Washington. [31]

Disposition

B.H Smith Jr. was abandoned in 1931. [4]

See also

Notes

  1. 1 2 3 4 5 6 7 Smith, Frank J. (July 20, 1924). "Resumption of Steamboat Service Seen on Willamette and Yamhill Rivers". The Sunday Oregonian. Vol. 43, no. 29. Portland, OR. sec.2, p.18, col.2.
  2. 1 2 3 4 "New Steamer Bonita". Morning Oregonian. Vol. 40, no. 12, 274. Portland, Oregon. April 16, 1900. p.10, col.3.
  3. 1 2 3 "The Bonita Launched: Latest Addition to Portland's Sternwheel Fleet". Morning Oregonian. Vol. 40, no. 12, 259. Portland, OR. March 29, 1900. p.8, col.1.
  4. 1 2 3 4 5 6 Affleck, Edward L. (2000). "Part One: Chapter Two: Columbia River Waterways -- List of Vessels". A Century of Paddlewheelers in the Pacific Northwest, the Yukon, and Alaska. Vancouver, BC: Alexander Nicholls Press. pp. 8, 9, 19. ISBN   0-920034-08-X.
  5. 1 2 3 4 5 U.S. Treasury Dept., Statistics Bureau (1902). Annual List of Merchant Vessels (FY end Jun 30, 1901). Washington, DC: GPO. p. 215.
  6. 1 2 "High Dive Today". The Sunday Oregonian (advertisement). Vol. 19, no. 16. Portland, Oregon. April 22, 1900. p.18, col.7.
  7. ↑ "High Dive at Vancouver". The Sunday Oregonian. Vol. 19, no. 17. Portland, OR. April 29, 1900. p.17, col.7.
  8. ↑ "Hoppickers Wanted". Morning Oregonian. Vol. 40, no. 12, 393. Portland, OR. September 1, 1900. p.7, col.1.
  9. 1 2 3 4 5 U.S. Treasury Department, Steamboat Inspection Service (1901). Annual Report of the Supervising Inspector General for the Fiscal Year ended June 30, 1901. Washington, DC: Government Printing Office. p. 24.
  10. 1 2 3 4 5 "The Bonita is in Trouble". Morning Oregonian. Portland, OR. July 19, 1901. p.8, col.5.
  11. ↑ "Hoppickers". Morning Oregonian. Vol. 41, no. 12, 703. Portland, OR. August 29, 1901. p.7, col.2.
  12. ↑ "Saturday, March 15". Oregon City Courier-Herald. Vol. 19, no. 44. Cheney, A.W.. March 21, 1902. p.1, col.2.
  13. 1 2 "The Steamer Metlako: White Collar Line Rechristens the Bonita with Legendary Title". Morning Oregonian. Vol. 42, no. 12, 895. Portland, OR. April 10, 1902. p.12, col.1.
  14. ↑ "River Steamer Disabled: Metlako Blows Out a Cylinder Head: One Passenger's Leg is Broken— Accident is Caused by a Broken Crank Pin". The Sunday Oregonian. Vol. 21, no. 18. Portland, OR. May 4, 1902. sec.2, p.12.
  15. 1 2 "The Dalles-Portland Route: Steamers "Tahoma" and "Metlako" …". Hood River Glacier (advertisement). Vol. 13. Blythe, S.F. Apr 25, 1902. p.4, col.8.
  16. ↑ "Lost a Cylinder-Head: Steamer Regulator Meets with Accident Near Cascade Locks". Morning Oregonian. Vol. 42, no. 12, 971. Portland, OR. Jul 8, 1902. p.12, col.3.
  17. ↑ "Cylinder Head Blew Out: Accident on Steamer Metlako Injures Charles R. Hall". The Sunday Oregonian. Vol. 21, no. 18. Portland, OR. May 4, 1902. p.8, col.5.
  18. 1 2 3 4 5 "Steamer Metlako Sold for Log Boat". Morning Oregonian. Vol. 48, no. 14, 992. Portland, OR. December 16, 1908. p.16, col.1.
  19. 1 2 3 4 5 "River Boatman Drowned: Peter Gearin Leaps from Steamer into Columbia River". Morning Oregonian. Vol. 42, no. 13, 145. Portland, OR. January 28, 1903. p.14, col.4.
  20. ↑ "Marine Notes". Morning Oregonian. Vol. 50, no. 15, 570. Portland, OR. October 21, 1910. p.22, col.2.
  21. ↑ "Steamer Metlako is Inspected". Morning Oregonian. Vol. 48, no. 14, 799. Portland, OR. May 5, 1908. p.16, col.2.
  22. 1 2 U.S. Treasury Dept, Statistics Bureau (1908). Annual List of Merchant Vessels (FY end June 30, 1907). Vol. 39. Wash. DC: GPO. p. 257. hdl:2027/njp.32101068130895.
  23. 1 2 3 U.S. Treasury Dept, Statistics Bureau (1910). Annual List of Merchant Vessels (FY end June 30, 1909). Vol. 41. Wash. DC: GPO. p. 256.
  24. ↑ "Marine Notes". Morning Oregonian. Vol. 55, no. 16, 927. Portland, OR. February 24, 1915. p.12, col.2.
  25. ↑ "Ridgefield Reports Damage: Columbia Rise Floods Fields, Warehouses, and Docks". Morning Oregonian. Vol. 56, no. 17, 351. Portland, OR. July 3, 1916. p.11, col.4.
  26. 1 2 3 "Steamer Metlako is Sold: Portland-Kelso Boat Sold by Marshal". Morning Oregonian. Vol. 59, no. 18, 542. Portland, OR. April 29, 1920. p. 20.
  27. ↑ "Pacific Coast Shipping Notes". Sunday Oregon. Vol. 39, no. 11. Portland, OR. March 14, 1920. p.23, cols.1&2.
  28. 1 2 3 4 "Metlako's Name Changed". Morning Oregonian. Vol. 59, no. 19, 795. Portland, OR. April 26, 1924. p.16, col.2.
  29. ↑ "Moving Picture News". Morning Oregonian. Vol. 60, no. 18, 951. Portland, OR. August 17, 1921. p. 10.
  30. 1 2 "Long-Bell Co. Buys Steamer". Morning Oregonian. Vol. LXII, no. 19, 414. Portland, OR. February 8, 1923. p.12, col.3.
  31. ↑ U.S. Commerce Dept, Navigation Bureau (1927). Annual List of Merchant Vessels (FY end Jun 30, 1926). Vol. 58. Wash. DC: GPO. pp. 24–25. hdl:2027/uc1.b3330088.

Related Research Articles

<i>Altona</i> (sternwheeler)

The steamship Altona operated from 1890 to 1907 on the Willamette River in the U.S. state of Oregon. In 1907, she was transferred to Alaska.

<i>Sarah Dixon</i> (sternwheeler)

Sarah Dixon was a wooden sternwheel-driven steamboat operated by the Shaver Transportation Company on the Columbia and lower Willamette rivers from 1892 to 1926. Originally Sarah Dixon was built as a mixed use passenger and freight vessel, and was considered a prestige vessel for the time.

<i>Emma Hayward</i>

Emma Hayward commonly called the Hayward, was a steamboat that served in the Pacific Northwest. This vessel was once one of the finest and fastest steamboats on the Columbia River and Puget Sound. As newer vessels came into service, Emma Hayward was relegated to secondary roles, and, by 1891, was converted into a Columbia river tow boat.

<i>Pomona</i> (sternwheeler) American steamboat

Pomona was a steamboat which operated on the Willamette, Columbia and Cowlitz rivers from 1898 to 1940. Pomona was specially designed to operate in low water conditions such as typically prevailed in the summer months in Oregon. Pomona was one of the few steamers that could regularly navigate to Corvallis, Oregon which was the practical head of navigation on the Willamette. In 1926, Pomona was substantially rebuilt, and served afterwards as a towboat. In 1940, Pomona was converted into an unpowered floating storehouse.

<i>Elwood</i> (sternwheeler)

Elwood was a sternwheel steamboat which was built to operate on the Willamette River, in Oregon, but which later operated on the Lewis River in Washington, the Stikine River in Canada, and on Puget Sound. The name of this vessel is sometimes seen spelled "Ellwood". Elwood is probably best known for an incident in 1893, when it was approaching the Madison Street Bridge over the Willamette River in Portland, Oregon. The bridge swung open to allow the steamer to pass. However, a streetcar coming in from the east end of the bridge failed to notice the bridge was open, and ran off into the river in the Madison Street Bridge disaster.

<span class="mw-page-title-main">Yamhill River lock and dam</span> Dam in Lafayette, Oregon

The Yamhill River lock and dam was completed in 1900. It was built near Lafayette, Oregon, to allow better river transport on the Yamhill River from Dayton, to McMinnville, Oregon. While the Corps of Engineers had recommended against construction of the lock, it was built anyway, largely as a result of political effort by the backers of the project. For almost forty years prior to the lock construction there had been efforts made to construct a lock and dam on the Yamhill River.

<i>Harvest Queen</i> (sternwheeler)

Harvest Queen was the name of two stern-wheel steamboat built and operated in Oregon. Both vessels were well known in their day and had reputations for speed, power, and efficiency.The first Harvest Queen, widely considered one of the finest steamers of its day, was constructed at Celilo, Oregon, which was then separated from the other portions of the navigable Columbia River by two stretches of difficult to pass rapids.

<i>Cowlitz</i> (sternwheeler) Shallow-draft sternwheeler built for service on the Cowlitz River

Cowlitz was a shallow-draft sternwheeler built for service on the Cowlitz River in southwestern Washington State. The vessel also served on the Columbia River. Cowlitz was in service from 1917 until September 1931, when, not far from The Dalles, Oregon, it sank in the Columbia river in a storm.

<span class="mw-page-title-main">People's Transportation Company</span>

The People's Transportation Company operated steamboats on the Willamette River and its tributaries, the Yamhill and Tualatin rivers, in the State of Oregon from 1862 to 1871. For a brief time this company operated steamers on the Columbia River, and for about two months in 1864, the company operated a small steamer on the Clackamas River.

<i>Wenat</i> (sternwheeler)

Wenat was a stern-wheel steamboat that, under the name Swan, was built and operated, briefly, on the Tualatin River, in the state of Oregon. In 1858, Swan was sold, moved to the lower Willamette River, renamed Cowlitz, and placed on a route between Portland, Oregon the Cowlitz River.

<i>Dayton</i> (sternwheeler)

Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.

<i>Albany</i> (1868 sternwheeler)

Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.

<i>Robert Young</i> (sternwheeler) American stern-wheel driven steamboat

Robert Young was a stern-wheel driven steamboat that operated on the Columbia and Willamette rivers from 1918 to 1935. This vessel was originally named Nespelem, and operated under that name until 1920. From 1920 to 1935, this vessel was owned by the Western Transportation Company or one of its subsidiaries, and was employed primarily in service to paper mills.

<i>Orient</i> (sternwheeler)

Orient was a light-draft sternwheel-driven steamboat built in 1875 for the Willamette River Transportation Company, a concern owned by pioneer businessman Ben Holladay. Shortly after its completion, it was acquired by the Oregon Steam Navigation Company. Orient was a near-twin vessel of a steamer built at the same time, the Occident.

<i>Northwest</i> (sternwheeler)

Northwest was a steamboat that operated on the Columbia, Cowlitz and lower Willamette rivers from 1889 to 1907. In 1907 Northwest was transferred to Alaska, where it sank on the Skeena River

<i>Joseph Kellogg</i> (sternwheeler)

Joseph Kellogg was a stern-wheel driven steamboat that operated on the Willamette, Columbia, and Cowlitz rivers for the Kellogg Transportation Company. It was named after the company's founder, Joseph Kellogg (1812-1903). The sternwheeler Joseph Kellogg was built in 1881 at Portland, Oregon.

<i>Chester</i> (sternwheeler)

Chester was a shallow draft steamboat built in 1897 that ran until 1917, mostly on the Cowlitz River in southwestern Washington.

<i>Relief</i> (1906 sternwheeler)

Relief was a stern-wheel steamboat that operated on the Columbia and Willamette rivers and their tributaries from 1906 to 1931. Relief had been originally built in 1902, on the Columbia at Blalock, Oregon, in Gilliam County, and launched and operated as Columbia, a much smaller vessel. Relief was used primarily as a freight carrier, first for about ten years in the Inland Empire region of Oregon and Washington, hauling wheat and fruit, and after that was operated on the lower Columbia river.

<i>Undine</i> (Columbia River sternwheeler) American passenger steamboat

Undine was a sternwheel-driven steamboat that operated from 1887 to 1935 on the Columbia and lower Willamette rivers. From 1935 to 1940 the same vessel was operated under the name The Dalles.

<i>Telegraph</i> (sternwheeler 1903)

Telegraph was a sternwheel-driven steamboat built in 1903 in Everett, Washington. Except for the summer of 1905, from 1903 to 1912, Telegraph served in Puget Sound, running mainly on the route from Seattle to Everett, and also from Seattle to Tacoma and Olympia, Washington.

References

Images

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.