Oregona at Salem, Oregon | |
History | |
---|---|
Name: | Oregona (1904-1924); Interstate (1924-1936) |
Owner: | Oregon City Transportation Co.; others later |
Route: | Willamette, Columbia and Yamhill rivers. |
In service: | 1904 |
Out of service: | 1936 |
Identification: | US registry #200949 (as Oregona); #223545 (as Interstate) |
Fate: | Dismantled |
General characteristics | |
Tonnage: | 370 gt; 281 rt (1904-1924); 336 gt; 308 rt (1924-1936) |
Length: | 132 ft (40 m) |
Beam: | 26.7 ft (8 m) |
Depth: | 5 ft (2 m) depth of hold |
Installed power: | twin horizontally mounted high-pressure single-cylinder steam engines. |
Propulsion: | sternwheel |
The steamboat Oregona operated on the Willamette River, the Columbia River and the Yamhill River from 1904 to 1936. From 1924 to 1936 this vessel was known as the Interstate.
The Willamette River is a major tributary of the Columbia River, accounting for 12 to 15 percent of the Columbia's flow. The Willamette's main stem is 187 miles (301 km) long, lying entirely in northwestern Oregon in the United States. Flowing northward between the Oregon Coast Range and the Cascade Range, the river and its tributaries form the Willamette Valley, a basin that contains two-thirds of Oregon's population, including the state capital, Salem, and the state's largest city, Portland, which surrounds the Willamette's mouth at the Columbia.
The Columbia River is the largest river in the Pacific Northwest region of North America. The river rises in the Rocky Mountains of British Columbia, Canada. It flows northwest and then south into the US state of Washington, then turns west to form most of the border between Washington and the state of Oregon before emptying into the Pacific Ocean. The river is 1,243 miles (2,000 km) long, and its largest tributary is the Snake River. Its drainage basin is roughly the size of France and extends into seven US states and a Canadian province. The fourth-largest river in the United States by volume, the Columbia has the greatest flow of any North American river entering the Pacific.
The Yamhill River is an 11-mile (18 km) tributary of the Willamette River, in the U.S. state of Oregon. Formed by the confluence of the South Yamhill River and the North Yamhill River about 3 miles (5 km) east of McMinnville, it drains part of the Northern Oregon Coast Range. The river meanders east past Dayton to join the Willamette River at its river mile (RM) 55 or river kilometer (RK) 89, south of Newberg.
Oregona was built at Portland, Oregon 1904 for the Oregon City Transportation Company. The vessel's dimensions were 132 feet (40 m) long, with a 27-foot (8.2 m) beam, 5-foot (1.5 m) depth of hold, 370 gross tons and 281 registered tons. The vessel was propelled by a sternwheel which was turned by two twin horizontally mounted high pressure steam engines. The piston diameter on each engine was 9 inches (230 mm), with a bore stroke of 48 inches (1,200 mm), generating 5.4 nominal horsepower. The official steamboat registry number was 200949. [1]
Portland is the largest and most populous city in the U.S. state of Oregon and the seat of Multnomah County. It is a major port in the Willamette Valley region of the Pacific Northwest, at the confluence of the Willamette and Columbia rivers. As of 2017, Portland had an estimated population of 647,805, making it the 26th most populated city in the United States, and the second-most populous in the Pacific Northwest. Approximately 2.4 million people live in the Portland metropolitan statistical area (MSA), making it the 25th most populous MSA in the United States. Its Combined Statistical Area (CSA) ranks 18th-largest with a population of around 3.2 million. Approximately 60% of Oregon's population resides within the Portland metropolitan area.
A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force is transformed, by a connecting rod and flywheel, into rotational force for work. The term "steam engine" is generally applied only to reciprocating engines as just described, not to the steam turbine.
Horsepower (hp) is a unit of measurement of power, or the rate at which work is done. There are many different standards and types of horsepower. Two common definitions being used today are the mechanical horsepower, which is about 745.7 watts, and the metric horsepower, which is approximately 735.5 watts.
Oregona was a typical all-purpose working steamboat of the Willamette River. [2]
The Oregon City Transportation Company had been organized by the Graham family in 1889. It was popularly known as the Yellow Stack Line. The names of all of its steamboats ended in -ona, for example, Altona, Leona, and Ramona. [2]
The steamship Altona operated from 1890 to 1907 on the Willamette River in the U.S. state of Oregon. In 1907, she was transferred to Alaska.
The steamship Leona operated from 1899 to 1912 on the Willamette River in the U.S. state of Oregon. This vessel was original launched under the name McMinnville in 1899, and should not be confused with an earlier vessel named McMinnville, which ran on the Willamette River from 1877 to 1881.
Until 1919, the Yellow Stack Line ran Oregona on the Willamette River as far south as Corvallis. [2] In 1919, rising competition from trucks and automobiles operating on newly built highways forced the company to suspend operations. In 1920, Captain Graham organized a new company, Inland Empire Boat and Truck Co., with a plan for moving freight by steamboat to the boat landings along the Willamette river, then further distributing it overland by trucks based at the landings. This business plan did not work out, and the company was forced to move Oregona off the Willamette as its regular route. [2]
Corvallis is a city in central western Oregon, United States. It is the county seat of Benton County and the principal city of the Corvallis, Oregon Metropolitan Statistical Area, which encompasses all of Benton County. As of the 2010 United States Census, the population was 54,462. Its population was estimated by the Portland Research Center to be 55,298 in 2013. Corvallis is the location of Oregon State University, a large Hewlett-Packard research campus, and Good Samaritan Regional Medical Center.
In 1924 Oregona was reconstructed at Vancouver, Washington and renamed Interstate. The overall length and beam of the vessel were unchanged, but it was slightly smaller but had a greater carrying capacity, at 336 gross tons and 308 registered tons. The engines at this time were rated at 350 indicated horsepower. The reconstructed vessel was operated by Greyhound Transportation Company. The official steamboat number for Interstate was 223545. [1]
Vancouver is a city on the north bank of the Columbia River in the U.S. state of Washington, and the largest suburb of Portland, Oregon. Incorporated in 1857, it is the fourth largest city in the state, with a population of 161,791 as of April 1, 2010 census. Vancouver is the county seat of Clark County and forms part of the Portland-Vancouver metropolitan area, the 23rd largest metropolitan area in the United States. Originally established in 1825 around Fort Vancouver, a fur-trading outpost, the city is located on the Washington/Oregon border along the Columbia River, directly north of Portland. In 2005, Money magazine named it No. 91 on its list of best places in America to live. In 2016, WalletHub ranks Vancouver the 89th best place in the US for families to live.
As Interstate, the vessel was run on routes down the Columbia to Longview and Kelso, Washington, although on occasion a run was made up the Yamhill River to Dayton, Oregon. [2]
To move through rapids, steamboats used a practice called lining, which involved running a rope or a steel cable to a secure point on shore, typically a large tree or a bolt specially set in a rock, and then wrapping the cable around a steam-powered winch on the boat. The winch would then crank in the cable, if the vessel was going upstream, or gradually let out the cable, if the vessel was headed downstream. [1] Along the Willamette River, in the first decades of the 1900s, the most dangerous obstacles to navigation were Willamette Falls and the Clackamas Rapids. Since 1873 locks at Oregon allowed navigation around Willamette Falls, but as late as 1907, lining was still required to pass the Clackamas Rapids, which were located north of Oregon City, near the mouth of the Clackamas River.
Lining was dangerous, as it was only the single cable that prevented the vessel from being washed downstream and likely wrecked. Any use of a cable on board a vessel was also hazardous to the crew. On October 15, 1907, at 8:30 am, while Oregona was lining through Clackamas Rapids, the lining cable became tangled in the sternwheel of a nearby steamer, the Ruth. A deckhand on Oregona, Virgil K. Pollard, was caught in a loop of the cable, which tightened around his legs, severing both legs six inches (152 mm) above the ankles. [3] The injured deckhand brought a legal action against the Ruth. When the case was presented to U.S. District Court Judge Robert S. Bean, he ruled that accident was held to be the fault of the Ruth, for ignoring the warning signals of the Oregona to stand away while the deckhand was engaged in coiling the cable which was still paid out from the Oregona following an unsuccessful lining attempt. Judge Bean awarded the deckhand, who was 19 years of age at the time of the accident, $12,000 in damages. [4]
On December 10, 1909, Oregona hit a snag in the Willamette river, and was forced to beach three miles (5 km) upriver from Weston Landing. [5] [6]
On December 26, 1913 Oregona was making the vessel's last run of the season, coming downriver from Corvallis loaded with cargo and carrying passengers. With Captain Bluhm in command, Oregona encountered the U.S. Corps of Engineers dredge Champoeg at Magoon Bar at the foot of the Clackamas Rapids. The dredge was in an unexpected location anchored in the middle of the channel. While the officers of Oregona attempted to avoid the dredge, this proved not possible, and the Oregona struck the corner of the dredge, suffering severe enough damage to cause the Oregona to sink after drifting down the river below the rapids. [5] [7]
Oregona was abandoned in 1936. [1]
The Willamette River flows northwards down the Willamette Valley until it meets the Columbia River at a point 101 miles from the Pacific Ocean, in the U.S. state of Oregon.
Launched in 1850, Lot Whitcomb, later known as Annie Abernathy, was the first steam-powered craft built on the Willamette River in the U.S. state of Oregon. She was one of the first steam-driven vessels to run on the inland waters of Oregon, and contributed to the rapid economic development of the region.
Echo was a sternwheel steamboat that operated on the Willamette River from about 1865 to 1873 and was one of the first steamboats to carry what was then considered a large cargo out of Eugene, Oregon.
The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.
The Beaver was a sternwheel steamboat built in 1873 for the Willamette Transportation Company.
Governor Grover was a sternwheel steamboat that ran on the Willamette River during the 1870s. Because of the completion of the Willamette Locks in late 1872, it was possible for vessels such as Governor Grover to be built in Portland, Oregon and then readily navigate the Willamette above Willamette Falls.
Elk was a stern-wheel driven steamboat built on the Willamette River in 1857 at Canemah, Oregon. This steamboat is chiefly remembered for its destruction by a boiler explosion in which by good fortune no one was seriously hurt. A folklore tale later arose about this disaster.
Grey Eagle was a wooden sternwheel-driven steamboat that operated on the Willamette and Yamhill rivers in the United States from 1894 to 1930. In 1903 Grey Eagle became the last commercial steamboat to run upriver to Junction City, Oregon.
Pomona was a steamboat which operated on the Willamette, Columbia and Cowlitz rivers from 1898 to 1940. Pomona was specially designed to operate in low water conditions such as typically prevailed in the summer months in Oregon. Pomona was one of the few steamers that could regularly navigate to Corvallis, Oregon which was the practical head of navigation on the Willamette. In 1926, Pomona was substantially rebuilt, and served afterwards as a towboat. In 1940, Pomona was converted into an unpowered floating storehouse.
Jennie Clark, also seen spelled Jenny Clark, was the first sternwheel-driven steamboat to operate on the rivers of the Pacific Northwest, including British Columbia. This vessel was commonly known as the Jennie when it was in service. The design of the Jennie Clark set a pattern for all future sternwheel steamboats built in the Pacific Northwest and in British Columbia.
Shoo Fly was a sternwheel-driven steamboat that operated on the Willamette and Columbia rivers in the 1870s. Originally built as primarily as a freight boat, the vessel was used in other roles, including towing and clearing of snags. Shoo Fly inspired the name of another sternwheeler on the Willamette River, Don't Bother Me.
The Upper Willamette Transportation Line was a line of four inland steamboats that operated from the fall of 1859 to the summer of 1860 on the upper Willamette River in the state of Oregon.
James Clinton was a steamboat which operated on the upper Willamette River from 1856 to 1861. Although the Clinton was said to have been "not a very good boat.", it was the first steamer ever to reach Eugene, Oregon. James Clinton was destroyed in April 1861, when a large fire broke out at Linn City, Oregon in a shoreside structure near to where the vessel was moored.
Oregon was a side-wheel driven steamboat that operated on the Willamette River in the state of Oregon from 1852 to 1854. The steamer was not economically successful and became a total loss by sinking after a short career.
Minnehaha was a sternwheel-driven steamboat which was built in 1866 on Oswego Lake, then known as Sucker Lake, in Oregon, United States. Minnehaha was later transferred to the Willamette and Columbia rivers where it operated for the first part of the 1870s.
Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.
Lining was a method used by steamboats to move up river through rapids. Lining could also be used to lower steamboats through otherwise impassible falls.
Relief was a stern-wheel driven steamboat that operated on the Willamette River from 1858 to 1865. Relief ran for a short time on the route from Portland to Oregon City, Oregon. After being bought out by the competition, Relief was lined around Willamette Falls to the upper Willamette, where it became the first steamboat to reach Springfield. This vessel should not be confused with a later vessel, also named Relief, which operated on the Columbia and Lewis rivers from 1906 to 1931.
Active was a stern-wheel driven steamboat that operated on the upper Willamette River from 1865 to 1872. During its short operational life, Active was owned by several different steamboat companies. It was dismantled in 1872 at Canemah, Oregon.