Relief crushed in ice, at Salem, winter of 1924–25 | |
History | |
---|---|
Name | Relief |
Owner | Open River Trans. Co., and others |
Port of registry | Portland, Oregon |
In service | 1906 |
Out of service | 1931 |
Identification | U.S. 203513 |
Fate | Abandoned 1931 |
General characteristics | |
Type | Inland passenger/freight |
Tonnage | 214 GRT; 209 NRT |
Length | 117.5 ft (35.81 m) |
Beam | 22.5 ft (6.86 m) |
Installed power | twin single-cylinder steam engines, 150 indicated horsepower |
Propulsion | stern-wheel |
Capacity | 75 tons |
Crew | eleven (11) |
Relief was a stern-wheel steamboat that operated on the Columbia and Willamette rivers and their tributaries from 1906 to 1931. Relief had been originally built in 1902, on the Columbia at Blalock, Oregon, in Gilliam County, and launched and operated as Columbia, a much smaller vessel. Relief was used primarily as a freight carrier, first for about ten years in the Inland Empire region of Oregon and Washington, hauling wheat and fruit, and after that was operated on the lower Columbia river.
After 1918 the owners of Relief struggled to find cargo, as railroads and especially highway transport cut sharply into the steamboat share of the transport business. Relief was seriously damaged in a sinking in late 1924, but was eventually raised, and returned to service for some time. Relief was abandoned in 1931.
In its natural state, the Columbia river had a many rapids and narrows which impeded navigation. Moving upstream, at river mile 146.5 were the Cascades Rapids, which were impassable upstream. Next came Celilo Falls, also known as The Dalles, which were a series of rapids, eddies, and chutes running between river miles 188 and 200. Between river mile 200 and the mouth of the Snake River, at river mile 325, [1] the Umatilla Rapids were the most significant barrier to steamboat navigation.
The river below the Cascades was called the Lower Columbia. Between the Cascades and The Dalles was the Middle Columbia. Upstream from The Dalles was called the Upper Columbia. Steamboats could not move upstream (except in rare cases by lining) through either Celilo Falls or the Cascades. In favorable conditions, steamboats could be taken down through the rapids. [2]
Starting in the 1850s, portage railroads, first drawn by mules, and then by steam locomotives, were built around both sets of rapids. In 1896 the Cascades Locks and Canal were completed, which effectively joined the lower and middle river for navigation. The portage railroad around Celilo Falls remained the only way to move steamboat cargo from the upper to the lower Columbia.
Railroads and steamboats often competed for business. There once had been steamboats operating on the upper Columbia river, but by 1883, railroad competition had been so successful that all river boats had been driven off the route. [3] Wheat farming became widespread in the region in the 1880s and 1890s, and the railroads could not handle the larger and larger wheat crops being produced. [3] The Open River Navigation company was formed to meet the demands for transport by wheat farmers and shippers, and it built a number of steamers, including Relief. [3]
Relief was rebuilt from the much smaller stern-wheel steamer Columbia (US registry 127689), which had been 77 ft (23.47 m ) feet long, 20.4 ft (6.22 m ) on the beam, with a depth of hold of 3.6 ft (1.10 m ) feet. [4] [5] The overall size of Columbia had been much smaller than Relief, at 80 gross tons and 40 net tons, with tons being a unit of volume and not weight in this instance. [4]
On August 31, 1906, the Morning Oregonian reported Capt. Frank J. Smith, transportation superintendent of the Open River Company, would leave the next evening to prepare for the opening of the grain shipping season, and would also likely be attending the launching of Relief, then under construction, at Blalock, Oregon. [6] Relief was launched on Tuesday, September 11, 1906. [7]
As built, Relief was 117.5 ft (35.81 m ) long, with a beam of 22.5 ft (6.86 m ), and depth of hold of 4.7 ft (1.43 m ). [8] The overall size of the vessel was 214 gross ton and 209 net tons, with ton in this instance being a measure of volume, and not weight. [8] The power plant was rated at 150 indicated horsepower. [8] The crew size was eleven (11). [8] The merchant vessel registry number was 203513. [8] Relief was reported to have had a 75-ton cargo carrying capacity. [9]
As built, Relief burned cordwood as fuel for its boiler. In April 1907, newspapers reported that work was in progress to convert Relief to an oil-fired steam plant. [10] In April 1907, the Open River company selected Archie Geer to be captain of Relief, and Capt. William R. Thomas as pilot. [10]
On October 3, 1906, Relief made its first commercial run, from Squally Hook, on the Columbia River in Gilliam County, Oregon, to Celilo, carrying 1,500 bags of wheat. [11] Once at Celilo, the wheat was transshipped around Celilo Falls on the portage railroad, to The Dalles, Oregon, where it was loaded on the sternwheeler Charles R. Spencer for further transport downriver. [11]
Open River company superintendent Frank J. Smith was on board Relief, which was reported to have readily climbed rapids on the river, and to have made excellent time. [11] In a possible contradiction, a newspaper report in 1907 stated that Relief could not ascend the Umatilla Rapids, upstream from the mouth of the Umatilla River and the town of Umatilla, Oregon. [9] [12] A non-contemporaneous authority states Relief lacked sufficient power to ascend the Umatilla rapids. [13]
In mid-January 1907 ice jammed the Columbia so much so that it was possible, if dangerous, to walk across the river. [14] The steamers Relief and Norma were tied up at Celilo, and protected from the ice by a log boom around the moorage. [14]
In September 1907, a newspaper estimated Relief, running out of Umatilla, would carry downriver 250,000 to 300,000 sacks of wheat from the fall harvest, at 1,500 sacks per trip. [15] At that time Fred Snipes was the superintendent of the Open River Navigation Company, owners of Relief and another sternwheeler, J.N. Teal. [15]
In November 1907, Relief was tied up at Celilo, unable to navigate because of low water in the upper Columbia river. [16]
On August 23, 1908, the Sunday Oregonian reported that engineers and a deck crew would begin overhauling Relief the next day at Celilo, Oregon, with the objective of starting operations on the upper Columbia river, that is, upstream from Celilo Falls. [17] Short hauls only were to be made, with the steamer operating primarily between Celilo and Columbus, Washington, a former settlement on the Columbia River near Maryhill, in Klickitat County. [17] The Open River Company, owners of Relief, also planned to run the steamer on several trips to Arlington, Oregon and to Alderdale, Washington, to ship wheat, which the Sunday Oregonian reported was coming in rapidly at the time. [17]
In February 1909, the Open River Navigation company announced a new steamboat service, to run from Portland to Kennewick and Pasco, using Relief and four other steamers operated by the company, J.N. Teal, Sarah Dixon, Inland Empire, and Twin Cities. [18] The new service was announced to begin on March 1, 1909, and would be extended to Lewiston, Idaho, on the Snake River, on March 15. [18] The company promised service to 85 towns or landings in Oregon and Washington, with freight rates reduced below rail shipping charges. [18] The company also stated that it would operate in connection with the Columbia Steamboat company to extend service as far up the Columbia as Priest Rapids. [18]
On October 15, 1909, Relief sank at the Celilo dock with 100 sacks of sugar on board. [19]
On July 11, 1912, the Oregon Daily Journal reported that the fruit growers of the White Bluff region of Washington had chartered Relief to replace the recently sunk W.R. Todd. [20] White Bluffs was a settlement 45 miles upriver from Kennewick. [21]
The commercial clubs of the Washington towns of White Bluffs, Hanford, Kennewick, Pasco, and Richland joined to make the arrangements to use Reliefon a tri-weekly schedule. [20] Relief had been lying at Celilo at the time, out of service. [22] Relief ran on the Kennewick - White Bluffs route for a month, but the business was insufficient, and the Open River Transportation company took the steamer off the run. [23] Kennewick was on the Columbia river, three miles upstream from the mouth of the Snake River, at Ainsworth, Washington. [21] Pasco was on the opposite bank of the Columbia from Kennewick. [21]
According to a newspaper report, the shippers gave their business to a rival boat, the Charles Bureau , running under Capt. McMillan. [23] The reasons for this were not clear. [23] Relief lost $30 a day on the route, and according to the terms with local businessmen, they were obligated to pay two months worth of losses to the Open River company. [23] One-third of Relief’s losses were made good by Pasco, one-third by Kennewick, and the rest by the upriver towns. [23]
On January 19, 1915, The Dalles-Columbia line, backed by the Willamette & Columbia River Towing Company, bought four river steamers from the Open River Transportation, including Relief, J.N. Teal, Twin Cities, and Inland Empire. [24] Relief was to run between Pasco and White Bluffs, Washington. [24]
Relief was transferred to the lower Columbia river when the Open River Navigation company gave up its service on the upper river. [25]
In the summer of 1917, Relief, then engaged in trade on the upper Willamette, was acquired by the Yamhill Navigation company, which removed the engines and boilers from another steamer owned by the company, Woodland, to install them in Relief. [26]
On October 14, 1918, Relief, having had its annual inspection by the U.S. steamboat authorities, was being considered by its owners to be placed on the Portland-Lewis River run. [27]
In early October 1920, Relief started running on the route along the lower Columbia river from Portland to Kelso, Washington. [28] Relief made three weekly trips to Kelso, and competing on the route with the Greyhound, recently completed at Kelso by the Gore brothers. [28]
On June 3, 1922, Lewis River Transportation company sold its freight franchise between Portland and the Lewis River towns to C.E.O. Brown, who operated a truck line on the Pacific Highway running from Portland to Woodland, Washington. [29] Relief, which reportedly had been making regular runs to Woodland for a long time, was taken off the route upon sale of the franchise. [29]
On May 5, 1921, the Oregon Daily Journal reported Relief had been chosen to transport Oregon pioneers, and their guests, to a Founders’ Day Celebration the following Saturday, May 7, at Champoeg, Oregon, on the Willamette River. [30] The boat would carry only 150 passengers, and would be commanded on the trip by Captain Lumm. [30]
In June 1921 Relief transported cattle to upriver points on the Willamette. [31]
In late October or early November 1921, Relief ran up on a gravel bar on the Willamette River, near the settlement of Fairfield, in Marion County. [32] Fairfield, now uninhabited, was located on the east bank of the Willamette River, between Salem and Champoeg, about eight miles west of Woodburn, Oregon. [33] The steamer was still there on the bar on November 17, having been stranded by low water conditions in the river. [32]
In early May, 1922, Capt. Willam C. Lumm, master and part owner, brought Relief back into service, after the boat had been laid up for some time. [25] Lumm's objective was to tow the tourist barge Bluebird on sight-seeing trips around the Portland harbor during the summer. [25]
On October 19, 1924, the Inland Waters Transportation Company announced that it would inaugurate steamboat service, using Relief, running on the Willamette River from Salem to Portland. [34] Relief was to depart Salem for Portland at 6:00 a.m. every Wednesday, Friday, and Monday, and return to Salem on Tuesdays, Thursdays, and Sundays. [34] Capt. Fritz Kruse was to have command of Relief. [34] Robert Kerns was to be the chief engineer. [34] Freight alone would be carried, and no passengers. [34] To receive freight, the company had built a warehouse in Salem at the intersection of Court and Water streets. [34]
On December 24, 1924, the Willamette River, for the first time in many years, froze bank to bank at Salem. [35] Relief had loaded nearly 100 tons of cargo, mostly paper, at the Chemeketa street dock at about 10:00 a.m. when a sudden change in current brought ice to the vessel, crossing it against the river bank, listing over badly, and near to capsizing. [35] Efforts to take off the cargo began early in the afternoon, and were successful. [35] Relief was valued at $12,000 and was insured. [35] The boat was being operated at the time by the Inland Waters Transportation company. [35]
On December 29, 1924, the pressure of the ice on the steamer caused the line holding the boat to the riverbank to break, resulting in Relief sinking in about 20 feet of water. [36] About one-half of the vessel was under water. [36]
By January 24, 1925, Relief had been raised. [37] The hole in the hull was about a foot above the water line when the steamer was not loaded, and it had been patched with canvas. [37] Relief was expected to be able to proceed to Portland under its own power for repairs. [37]
By late February 1925, Relief was tied up, out of service, on Willamette Slough, a backwater near Salem. [38] Charles F. Schuab owned Relief when the boat was sunk at Salem. [38] Relief was insured by the Globe & Rutgers Fire Insurance company. [38] Schuab became involved in a dispute with the insurance company, with Schuab insisting that the insurer pay $3,259.26, which it was claimed was the cost of raising the boat. [38] The insurance company claimed that the boat had been allowed to sink. [38]
The insurance company obtained a judgment of $3,500 against Relief, and then purchased the boat for $2,100 at a public auction held to satisfy the judgment. [39] In early July 1925 the insurance company, backed by Lloyd's of London was looking for a buyer for Relief, then still in Salem despite long-standing plans to send it to Portland for repairs. [39]
On August 20, 1926, a newspaper reported Relief had been repaired and placed in service on a regular run between Portland and the Yamhill River. [40]
Relief was abandoned in 1931. [41]
Many steamboats operated on the Columbia River and its tributaries, in the Pacific Northwest region of North America, from about 1850 to 1981. Major tributaries of the Columbia that formed steamboat routes included the Willamette and Snake rivers. Navigation was impractical between the Snake River and the Canada–US border, due to several rapids, but steamboats also operated along the Wenatchee Reach of the Columbia, in northern Washington, and on the Arrow Lakes of southern British Columbia.
Gazelle was an early sidewheeler on the Willamette River in what is now the U.S. state of Oregon. She did not operate long, suffering a catastrophic boiler explosion on April 8, 1854, less than a month after her trial voyage. This was the worst such explosion ever to occur in the Pacific Northwest states. The wrecked Gazelle was rebuilt and operated for a few years, first briefly as the unpowered barge Sarah Hoyt and then, with boilers installed, as the steamer Señorita. A victim of the explosion was D.P. Fuller, age 28, who is buried in Lone Fir Cemetery in Portland, Oregon.
Sarah Dixon was a wooden sternwheel-driven steamboat operated by the Shaver Transportation Company on the Columbia and lower Willamette rivers from 1892 to 1926. Originally Sarah Dixon was built as a mixed use passenger and freight vessel, and was considered a prestige vessel for the time.
Pomona was a steamboat which operated on the Willamette, Columbia and Cowlitz rivers from 1898 to 1940. Pomona was specially designed to operate in low water conditions such as typically prevailed in the summer months in Oregon. Pomona was one of the few steamers that could regularly navigate to Corvallis, Oregon, which was the practical head of navigation on the Willamette. In 1926, Pomona was substantially rebuilt, and served afterwards as a towboat. In 1940, Pomona was converted into an unpowered floating storehouse.
Grahamona was a sternwheel steamboat built in 1912 for the Oregon City Transportation Company, commonly known as the Yellow Stack Line. Grahamona was specially designed to serve on the shallow waters of the upper Willamette River. It was one of the largest steamboats ever to operate on the upper Willamette. In 1920, Grahamona was sold and the name was changed to Northwestern. In 1939, the vessel was sold again, and transferred to Alaska for service on the Kuskokwim River.
Elwood was a sternwheel steamboat which was built to operate on the Willamette River, in Oregon, but which later operated on the Lewis River in Washington, the Stikine River in Canada, and on Puget Sound. The name of this vessel is sometimes seen spelled "Ellwood". Elwood is probably best known for an incident in 1893, when it was approaching the Madison Street Bridge over the Willamette River in Portland, Oregon. The bridge swung open to allow the steamer to pass. However, a streetcar coming in from the east end of the bridge failed to notice the bridge was open, and ran off into the river in the Madison Street Bridge disaster.
Black Hawk was one of three small iron-propeller driven steamboats manufactured in Philadelphia in about 1850 and shipped to the west coast of United States to be placed in river service. The other boats were Eagle and Major Redding. These boats were some of the earliest steamers to operate on the Willamette and Columbia rivers. They could carry about 12 passengers and perhaps a ton of cargo. The boats had to be small to make the run to Oregon City, which passed through the Clackamas rapids a short distance downriver from the town.
Harvest Queen was the name of two stern-wheel steamboat built and operated in Oregon. Both vessels were well known in their day and had reputations for speed, power, and efficiency.The first Harvest Queen, widely considered one of the finest steamers of its day, was constructed at Celilo, Oregon, which was then separated from the other portions of the navigable Columbia River by two stretches of difficult to pass rapids.
The People's Transportation Company operated steamboats on the Willamette River and its tributaries, the Yamhill and Tualatin rivers, in the State of Oregon from 1862 to 1871. For a brief time this company operated steamers on the Columbia River, and for about two months in 1864, the company operated a small steamer on the Clackamas River.
Shoo Fly was a sternwheel-driven steamboat that operated on the Willamette and Columbia rivers in the 1870s. Originally built as primarily a freight boat, the vessel was used in other roles, including towing and clearing of snags. Shoo Fly inspired the name of another sternwheeler on the Willamette River, Don't Bother Me.
Alice was a stern-wheel driven steamboat that operated on the Willamette and Columbia rivers in the 1870s and 1880s. Alice was the largest vessel built above Willamette Falls and was considered in its day to be the "Queen of the River". This steamer was rebuilt after near-destruction in a fire at Oregon City, Oregon in May 1873. In 1876, it was withdrawn from the upper Willamette River and transferred to the Columbia River, where it was worked as a towboat moving ocean-going ships to and from Portland and Astoria, Oregon, near the mouth of the Columbia River.
Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.
Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.
Onward was a stern-wheel driven steamboat that operated on the Tualatin River from 1867 to 1873, on Sucker Lake, now known as Oswego Lake, from 1873 to 1874, on the Cowlitz and Lewis rivers. This vessel should not be confused with the similar sternwheeler Onward built in 1858 at Canemah, Oregon and dismantled in 1865.
Active was a stern-wheel driven steamboat that operated on the upper Willamette River from 1865 to 1872. During its short operational life, Active was owned by several different steamboat companies. It was dismantled in 1872 at Canemah, Oregon.
Robert Young was a stern-wheel driven steamboat that operated on the Columbia and Willamette rivers from 1918 to 1935. This vessel was originally named Nespelem, and operated under that name until 1920. From 1920 to 1935, this vessel was owned by the Western Transportation Company or one of its subsidiaries, and was employed primarily in service to paper mills.
Joseph Kellogg was a stern-wheel driven steamboat that operated on the Willamette, Columbia, and Cowlitz rivers for the Kellogg Transportation Company. It was named after the company's founder, Joseph Kellogg (1812-1903). The sternwheeler Joseph Kellogg was built in 1881 at Portland, Oregon.
N.S. Bentley, commonly referred to as simply Bentley, was a stern-wheel driven steamboat that operated on the Willamette rivers. Launched in East Portland in December 1886, Bentley ran until 1896, when it was rebuilt and renamed Albany. Bentley was owned by the Oregon Pacific Railway, and was used as part of a rail and marine link from Portland to San Francisco, running down the Willamette, then to Yaquina Bay, and then by ocean steamer south to California. In 1896, Bentley was rebuilt and renamed Albany.
Undine was a sternwheel-driven steamboat that operated from 1887 to 1935 on the Columbia and lower Willamette rivers. From 1935 to 1940 the same vessel was operated under the name The Dalles.
Mountain Gem was a sternwheel-driven steamboat that operated on the Snake and Columbia rivers from 1904 to 1912, when the machinery was removed and installed in a different, newly built steamboat. Mountain Gem remained on the U.S. merchant vessel registry until 1922 or later. Although Mountain Gem was not abandoned until 1924, there is no evidence it was used after 1912.