Steamboats of the Columbia River, Wenatchee Reach

Last updated • 4 min readFrom Wikipedia, The Free Encyclopedia

Steamboats operated on the Wenatchee Reach of the Columbia River from the late 1880s to 1915. The main base of operations was Wenatchee, Washington, located at the confluence of the Wenatchee and Columbia Rivers, 465 miles (748 km) from the mouth of the river. Operations were mainly between Wenatchee and Bridgeport. Rapids below Wenatchee and above Bridgeport prevented safe navigation.

Contents

Economic background

By the first decade of the 20th century wheat farming had expanded into Douglas County's "Big Bend" region of the Columbia near Bridgeport, and the valleys of the Okanogan, Methow, Chelan, and Entiat rivers were rapidly developing. The Great Northern Railway was completed to Wenatchee and west to Puget Sound by 1893, making it became profitable for crops to be shipped down the Columbia to Wenatchee's rail link. [1]

No complete open river

Okanogan coming downstream on the Okanogan River, circa 1910 Okanogan (steamboat) coming downstream 1910.JPG
Okanogan coming downstream on the Okanogan River, circa 1910

Prior to the construction of dams, open navigability was never established throughout the Columbia. This was an important difference from the Mississippi-Ohio River system, which in the right season, and with a canal around the Falls of the Ohio, was navigable from New Orleans to Pittsburgh, an enormous distance. By contrast, no steamboat could ever ascend or descend the entire route of the Columbia, although the nature of the river was that even far inland, such as at Arrow and Kootenay Lakes, vast areas remained navigable, but separated by rapids and shoals from the rest of the river.

The rapids and shoals separating the Wenatchee Reach from the lower Columbia were practically unnavigable, although Captain William Gray did try to establish a steamboat route up the river by taking City of Ellensburg up through Priest and Rock Islands Rapids, with the aid of a cable anchored to the bank and then wrapped around the capstan. The boat, and one other, Thomas L. Nixon, (this one lined up over the rapids) operated above Wenatchee for a while as the only two boats on that stretch of the river. [2]

Steamboat operations on Wenatchee Reach

Steamboats at wharf at Okanogan, Washington, May 1909 Steamboats at Okanogan wharf, May 1909.jpg
Steamboats at wharf at Okanogan, Washington, May 1909

From about 1891 to 1915, steamboats operated on the far inland Columbia river out of Wenatchee, Washington, a part of the river which this article will refer to as the Wenatchee Reach. Navigation was never continuous from the Wenatchee Reach to the downriver parts of the Columbia. See Steamboats of the Columbia River for a discussion of the boats operating on the lower routes.

Establishment of operations

By the 1890s the railroad had reached Wenatchee, but there was no transportation any further up the Columbia from there. Alexander Griggs, an experienced Mississippi River steamboat captain, arrived in Wenatchee in about 1891, and in 1893 he organized the Columbia and Okanogan Steamboat Company to navigate the 70-mile (110 km) stretch from Wenatchee to the mouth of the Okanogan River.

The Corps of Engineers had blasted out some of the larger rocks in the river and removed some snags. At critical places at various rapids the Corps had installed huge ringbolts set in the rocks beside the river, so a steamboat could hook up a cable to these bolts, wrap the end around a steam-powered winch on board, and literally crank its way up the rapids. [2] [3] Horse drawn tow paths alongside the river were also employed. [2]

Boats on the route

Eventually Captain Griggs put eight or nine boats on the route, including Alexander Griggs, W.H. Pringle, Selkirk, Gerone, Columbia, Oro, Camano, North Star, Chelan, and Okanogan. The first three boats were lost in rapids, Griggs and Pringle at Entiat, and Selkirk at Rock Island.

Decline and end of steamboat service

The last four boats were laid up about 1910 for lack of business, (and competition from the Great Northern Railway branch that had been laid north to Oroville) and later burned all at once in a spectacular blaze while moored at Wenatchee on July 8, 1915. None of the vessels burned was insured, and the company's last boat, Enterprise, sank just four days later, on July 12, 1915, at Brewster's Landing. [2] [3] [4]

Another boat on the route, St. Paul, not owned by C&OSN, burned the same year, leaving only Del Rio and Robert Young, and later, in 1917, Bridgeport, which continued steamboat operations on the routes above Wenatchee into the mid-1920s. [2]

Notes

  1. Meinig, D.W. (1995) [1968]. The Great Columbia Plain (Weyerhaeuser Environmental Classic ed.). University of Washington Press. pp. 372, 435, 445, 455–456. ISBN   0-295-97485-0.
  2. 1 2 3 4 5 Mills, Sternwheelers up Columbia, at 90-94
  3. 1 2 Timmen, Blow for the Landing, at 75-76
  4. McCurdy, Marine History, at 256-57

Related Research Articles

<span class="mw-page-title-main">Steamboats of the Columbia River</span>

Many steamboats operated on the Columbia River and its tributaries, in the Pacific Northwest region of North America, from about 1850 to 1981. Major tributaries of the Columbia that formed steamboat routes included the Willamette and Snake rivers. Navigation was impractical between the Snake River and the Canada–US border, due to several rapids, but steamboats also operated along the Wenatchee Reach of the Columbia, in northern Washington, and on the Arrow Lakes of southern British Columbia.

<span class="mw-page-title-main">Steamboats of the Arrow Lakes</span>

The era of steamboats on the Arrow Lakes and adjoining reaches of the Columbia River is long-gone but was an important part of the history of the West Kootenay and Columbia Country regions of British Columbia Canada. The Arrow Lakes are formed by the Columbia River in southeastern British Columbia. Steamboats were employed on both sides of the border in the upper reaches of the Columbia, linking port towns on either side of the border, and sometimes boats would be built in one country and operated in the other. Tributaries of the Columbia include the Kootenay River which rises in Canada, then flows south into the United States, then bends north again back into Canada, where it widens into Kootenay Lake. As with the Arrow Lakes, steamboats once operated on the Kootenay River and Kootenay Lake.

<span class="mw-page-title-main">Shipwrecks of the inland Columbia River</span>

Steamboats on the Columbia River system were wrecked for many reasons, including striking rocks or logs ("snags"), fire, boiler explosion, or puncture or crushing by ice. Sometimes boats could be salvaged, and sometimes not.

<span class="mw-page-title-main">Steamboats of the Willamette River</span>

The Willamette River flows northwards down the Willamette Valley until it meets the Columbia River at a point 101 miles from the Pacific Ocean, in the U.S. state of Oregon.

<span class="mw-page-title-main">Steamboats of the Oregon Coast</span> 19th century steamboats in Oregon, US

The history of steamboats on the Oregon Coast begins in the late 19th century. Before the development of modern road and rail networks, transportation on the coast of Oregon was largely water-borne. This article focuses on inland steamboats and similar craft operating in, from south to north on the coast: Rogue River, Coquille River, Coos Bay, Umpqua River, Siuslaw Bay, Yaquina Bay, Siletz River, and Tillamook Bay. The boats were all very small, nothing like the big sternwheelers and propeller boats that ran on the Columbia River or Puget Sound. There were many of them, however, and they came to be known as the "mosquito fleet."

<span class="mw-page-title-main">Steamboats of the Coquille River</span>

The Coquille River starts in the Siskiyou National Forest and flows hundreds of miles through the Coquille Valley on its way to the Pacific Ocean. Bandon, Oregon, sits at the mouth of the Coquille River on the Pacific Ocean. Before the era of railroads and later, automobiles, the steamboats on the Coquille River were the major mode of transportation from Bandon to Coquille and Myrtle Point in southern Coos County, Oregon, United States.

<span class="mw-page-title-main">Steamboats of the Cowlitz River</span>

The Cowlitz River flows into the Columbia River at a point 68 miles from the Columbia's mouth, in southwestern Washington, United States.

The Okanogan Steamboat Company was a shipping company that ran steamboats on the Columbia River above Wenatchee, Washington from the late 19th century to 1915.

<i>Leona</i> (sternwheeler)

The steamship Leona operated from 1899 to 1912 on the Willamette River in the U.S. state of Oregon. This vessel was original launched under the name McMinnville in 1899, and should not be confused with an earlier vessel named McMinnville, which ran on the Willamette River from 1877 to 1881.

<i>Hassalo</i> (1880 sternwheeler)

The steamboat Hassalo operated from 1880 to 1898 on the Columbia River and Puget Sound. Hassalo became famous for running the Cascades of the Columbia on May 26, 1888 at a speed approaching 60 miles (97 km) an hour. This vessel should not be confused with other steamboats with the same or a similar name, including Hassalo (1899) and Hassaloe (1857).

<i>Lurline</i> (1878 sternwheeler)

Lurline was a steamboat that served from 1878 to 1930 on the Columbia and Willamette rivers. Lurline was a classic example of the Columbia river type of steamboat.

<i>R. R. Thompson</i> (sternwheeler)

R. R. Thompson was a large sternwheel steamboat designed in the classic Columbia River style. She was named after Robert R. Thompson, one of the shareholders of the Oregon Steam Navigation Company, the firm that built the vessel.

<i>Colonel Wright</i> (sternwheeler)

The Colonel Wright was the first steamboat to operate on the Columbia River above The Dalles in the parts of the Oregon Country that later became the U.S. states of Oregon, Washington and Idaho. She was the first steamboat to run on the Snake River. She was named after Colonel George Wright, an army commander in the Indian Wars in the Oregon Country in the 1850s. She was generally called the Wright during her operating career.

<i>Idaho</i> (sidewheeler)

The sidewheeler Idaho was a steamboat that ran on the Columbia River and Puget Sound from 1860 to 1898. There is some confusion as to the origins of the name; many historians have proposed it is the inspiration for the name of the State of Idaho. Considerable doubt has been cast on this due to the fact that it is unclear if the boat was named before or after the idea of 'Idaho' as a territory name was proposed. John Ruckel also allegedly stated he had named the boat after a Native American term meaning 'Gem of the Mountains' he got from a mining friend from what is now Colorado territory. This steamer should not be confused with the many other vessels of the same name, including the sternwheeler Idaho built in 1903 for service on Lake Coeur d'Alene and the steamship Idaho of the Pacific Coast Steamship Line which sank near Port Townsend, Washington.

Annie Faxon

Annie Faxon was a steamboat that was built by the Oregon Steam Navigation Company. She is chiefly remembered now for the catastrophic boiler explosion in 1893 that destroyed her and killed eight people on board.

<i>North Star</i> (1902 sternwheeler)

North Star was a sternwheel steamboat that operated in eastern Washington from 1902 to 1904. This vessel should not be confused with the other vessels, some of similar design, also named North Star.

<i>Gwendoline</i> (sternwheeler) Sternwheel steamer that operated on the Kootenay River

Gwendoline was a sternwheel steamer that operated on the Kootenay River in British Columbia and northwestern Montana from 1893 to 1899. The vessel was also operated briefly on the Columbia River in the Columbia Valley.

<i>Selkirk</i> (sternwheeler 1895) Early 20th-century steamboat operating in British Columbia, Canada

Selkirk was a small sternwheel steamboat that operated on the Thompson and Columbia rivers in British Columbia from 1895 to 1917. This vessel should not be confused with the much larger Yukon River sternwheeler Selkirk.

<i>Ramona</i> (1892 sternwheeler)

The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.

<i>Robert Young</i> (sternwheeler) American stern-wheel driven steamboat

Robert Young was a stern-wheel driven steamboat that operated on the Columbia and Willamette rivers from 1918 to 1935. This vessel was originally named Nespelem, and operated under that name until 1920. From 1920 to 1935, this vessel was owned by the Western Transportation Company or one of its subsidiaries, and was employed primarily in service to paper mills.

References

Photographs