| Twin Sisters | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 A portion of Shaw's "View on the Liverpool and Manchester Railway with the Locomotive Twin Sisters in a Siding" (1830) [1] | |||||||||||||||||||
| |||||||||||||||||||
| |||||||||||||||||||
| |||||||||||||||||||
| |||||||||||||||||||
The Twin Sisters was an early steam locomotive, built for use during the construction of the Liverpool and Manchester Railway. It was distinctive for its use of two vertical boilers, with a pair of separate chimneys, leading to its name.
By 1828 the Liverpool and Manchester Railway was under construction and their first steam locomotive had already been supplied to assist with this. This was one of the first railways built outside the coal-producing areas and so the local landowners were hostile to railways generally and particularly to any smoke they produced. The enabling Act of Parliament for the Liverpool and Manchester Railway required that locomotives should not produce smoke. [2]
This first locomotive was described as the Liverpool Travelling Engine in Robert Stephenson's drawings, but would later become known as the Lancashire Witch . [i] It used a new boiler design to reduce smoke: this burned coke rather than coal, and also had twin furnaces. These were fired sequentially, an idea that would later be patented and used in the Lancashire stationary boiler. [4] [5] [6] The new boiler was the idea of Henry Booth, who had approached the L&M board in April 1827 with his ideas for coke-burning. [2] Although Booth was the company secretary and treasurer of the L&M, he was also an inventive engineer and collaborated closely with the Stephensons, particularly on developments in boilers.
The Travelling Engine was ordered on 7 January 1828 and had only been working for a few months when on 21 April it was decided to transfer it to the Bolton and Leigh Railway, which was to be opened in June. [7] [ii]
A second engine as a replacement, similar to the first, was being built in Stephenson's works during July 1828, when it was seen by visitors including Horatio Allen of the Delaware and Hudson Canal Company and the French engineers Coste and Perdonnet, who wrote one of the few contemporary engineering descriptions of it. [8] The locomotive, later known as the Pride of Newcastle, was diverted to the DHC and shipped in October 1828. [9] [iii]
A further locomotive was discussed on 16 March 1829 and arrived in mid-July. [10] The intention was to use it to remove spoil from the 70 ft deep Olive Mount cutting to the embankment constructed at Broad Green. [10]
The Liverpool and Manchester Railway were required to ensure that the engines did not produce smoke. [2] This was the first railway where this was a formal requirement, although experiments had already taken place to reduce the smoke from the boilers of stationary engines. Combustion engineering was in its infancy but it was already recognised that coal burned in two stages: gases were released from the coal, which gases could then be burned, and the solid coke matter remaining could also be burned in a separate process. Techniques used to achieve this could either involve gasification of the coal in situ in the furnace, or coking of the coal in a separate furnace beforehand. [iv]
A drawback to the use of coke was that the fire required a stronger blast on it, produced either by bellows, a fan or the blastpipe, [11] or in Stephenson's term, the 'exarsting pipe'. [10] Twin Sisters was designed from the outset to burn coke, this led to an alternative name for it as the Liverpool Coke Engine. [12]
Stephenson's Lancashire Witch used twin furnaces to increase the heating surface area within the same length of boiler barrel, but the reason for Twin Sister's twin boilers is unclear; whether it was to do likewise, [13] [14] or simply because it was first built and tested as a smaller boiler, then duplicated. Booth's first attempt at a multitubular boiler was built at Laird's in Birkenhead and shipped to Newcastle, where Stephenson built a second and used them both on the one locomotive. [15]
The rest of the design was conventional for a Stephenson locomotive of this time, with a number of features which had first appeared on Lancashire Witch. The overall weight of the Twin Sisters is not recorded, but may have been more than Lancashire Witch, indicated by the use of six wheels rather than four. These wheels were wooden, with wrought iron tyres, and all were sprung. [v] Two inclined cylinders, of the same size and pattern as Witch, drove the end wheels, and thus through coupling rods to the others. There was a facility in the valve gear for expansive working.
Water was supplied pre-heated by large 'railway kettles' at stations alongside the track. [16] This was then carried in a wooden barrel on the engine's tender and supplied to the boiler by a pump cylinder driven from the engine crosshead.
From mid-1829, Twin Sisters was used successfully for the line's construction. [13] [17]
The Rainhill Trials were held in October 1829. After this, Rocket was used on the construction of the line. Rocket was used on the Chat Moss section and Twin Sisters was used near Liverpool. [13]
The LMR opened in September 1830. [13] [18] After the opening of the line, Twin Sisters continued in service for some time and was engaged in ballasting work until 1831. [18] Twin Sisters was never part of the formal stock of the railway and so was one of the first examples of departmental stock. [13] In February she was involved in a fatal accident at Liverpool Road station, the Manchester terminus of the line. [13] [19]
She was scrapped around December 1831. One of the cylinders was kept and used to drive a water pump at Manchester. [20]
In mid-1829, Stephenson's supplied two locomotives to plateways at ironworks in South Wales: William Forman's [21] Penydarren ironworks and Samuel Homfray's [22] [vi] Tredegar Ironworks. [23] These had works numbers 14 and 16 and were both recorded in Stephenson's log books on 18 July 1829. [24]
The Forman locomotive was designed, like the Twin Sisters, with two vertical boilers, although it was then built with a single-flue horizontal boiler. An initial drawing of July 1828 showed a horizontal boiler, but by the time it was ordered in December, a drawing shows it with the twin boilers. The wheels were 3 feet diameter and the cylinders of 7×20 inches, smaller than those of Twin Sisters, but the layout was otherwise similar with six wheels and inclined cylinders. [25]
The second locomotive was shipped to South Wales on the same ship, on 18 July 1829, and this has led to some confusion between the two. [24] [25] The Tredegar locomotive, named Britannia, used Stephenson's first return-flue boiler. [23]
After two years of successful service, Forman's engine was returned to Newcastle and rebuilt, with a new multi-tubular boiler built from the original boiler barrel, and re-gauged to 4 ft 6 in (1,372 mm). [23]
The Rainhill trials were a competition run from the 6 to 14 October 1829, to test George Stephenson's argument that locomotives would have the best motive power for the then nearly-completed Liverpool and Manchester Railway (L&MR). Ten locomotives were entered, of which five were able to compete, running along a 1 mile (1.6 km) length of level track at Rainhill, in Lancashire.
Stephenson's Rocket is an early steam locomotive of 0-2-2 wheel arrangement. It was built for and won the Rainhill Trials of the Liverpool and Manchester Railway (L&MR), held in October 1829 to show that improved locomotives would be more efficient than stationary steam engines.
Timothy Hackworth was an English steam locomotive engineer who lived in Shildon, County Durham, England and was the first locomotive superintendent of the Stockton and Darlington Railway.
A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels.
Sans Pareil is a steam locomotive built by Timothy Hackworth which took part in the 1829 Rainhill Trials on the Liverpool and Manchester Railway, held to select a builder of locomotives. The name is French and means 'peerless' or 'without equal'.
The Stourbridge Lion was an early railroad steam locomotive. In 1829 it was the first locomotive to be operated in the United States, although foreign-built, and one of the first locomotives to operate outside Britain. It takes its name from the lion's face painted on the front, and Stourbridge in England, where it was manufactured by the firm Foster, Rastrick and Company in 1829. The locomotive, obtained by the Delaware & Hudson Canal Company (D&H), was shipped to New York in May 1829, where it was tested raised on blocks. It was then taken to Honesdale, Pennsylvania for testing on the company's newly built track. The locomotive performed well in its first test in August 1829, but was found to be too heavy for the track and was never used for its intended purpose of hauling coal wagons. During the next few decades, a number of parts were removed from the abandoned locomotive until only the boiler and a few other components remained. These were acquired by the Smithsonian Institution in 1890 and are currently on display at the B&O Railroad Museum in Baltimore.
Foster, Rastrick and Company was one of the pioneering steam locomotive manufacturing companies of England. It was based in Stourbridge, Worcestershire, now West Midlands. James Foster, an ironmaster, and John Urpeth Rastrick, an engineer, became partners in 1816, forming the company in 1819. Rastrick was one of the judges at the Rainhill Trials in 1829. The company was dissolved on 20 June 1831.
Locomotion No. 1 is an early steam locomotive that was built in 1825 by the pioneering railway engineers George and Robert Stephenson at their manufacturing firm, Robert Stephenson and Company. It became the first steam locomotive to haul a passenger-carrying train on a public railway, the Stockton and Darlington Railway (S&DR).
The Bolton and Leigh Railway (B&LR) was the first public railway in Lancashire. It opened for goods on 1 August 1828, and thus preceded the Liverpool and Manchester Railway (L&MR) by two years. Passengers were carried from 1831. The railway operated independently until 1845 when it became part of the Grand Junction Railway.
An 0-2-2, in the Whyte notation for the classification of steam locomotives by wheel arrangement, is one that has two coupled driving wheels followed by two trailing wheels, with no leading wheels. The configuration was briefly built by Robert Stephenson and Company for the Liverpool and Manchester Railway.
The Liverpool and Manchester Railway (LMR) 57 Lion is an early 0-4-2 steam locomotive, which had a top speed of 40 mph (64 km/h) and could pull up to 200 tons. One of a pair designed for hauling freight, Lion was built by Todd, Kitson & Laird of Leeds in 1838. It featured in the 1953 Ealing comedy, The Titfield Thunderbolt.
Novelty was an early steam locomotive built by John Ericsson and John Braithwaite to take part in the Rainhill Trials in 1829.
Henry Booth was a British corn merchant, businessman and engineer particularly known as one of the key people behind the construction and management of the pioneering Liverpool and Manchester Railway (L&M), the world's first steam railway conducting both scheduled passenger services and freight.
Robert Stephenson and Company was a locomotive manufacturing company founded in 1823 in Forth Street, Newcastle upon Tyne in England. It was the first company in the world created specifically to build railway engines.
The history of rail transport in Great Britain to 1830 covers the period up to the opening of the Liverpool and Manchester Railway, the world's first intercity passenger railway operated solely by steam locomotives. The earliest form of railways, horse-drawn wagonways, originated in Germany in the 16th century. Soon wagonways were also built in Britain. However, the first use of steam locomotives was in Wales. The invention of wrought iron rails, together with Richard Trevithick's pioneering steam locomotive meant that Britain had the first modern railways in the world.
The Bury Bar Frame locomotive was an early type of steam locomotive, developed at the Liverpool works of Edward Bury and Company, later named Bury, Curtis, and Kennedy in 1842. By the 1830s, the railway locomotive had evolved into three basic types - those developed by Robert Stephenson, Timothy Hackworth and Edward Bury.
Lancashire Witch was an early steam locomotive built by Robert Stephenson and Company in Newcastle-upon-Tyne in 1828. It was a development of Locomotion.
George Stephenson built a number of experimental steam locomotives to work in the Killingworth Colliery between 1814 and 1826.
Steam springs or steam suspension are a form of suspension used for some early steam locomotives designed and built by George Stephenson. They were only briefly used and may have been used for fewer than ten locomotives.
Swiftsure was the first of eight or more similar locomotives with a single pair of driving wheels built by George Forrester and Company (Forresters) from 1834. The tank variant was the first passenger tank engine to enter service in the world.