A two-dimensional elastic membrane under tension can support transverse vibrations. The properties of an idealized drumhead can be modeled by the vibrations of a circular membrane of uniform thickness, attached to a rigid frame. Due to the phenomenon of resonance, at certain vibration frequencies, its resonant frequencies, the membrane can store vibrational energy, the surface moving in a characteristic pattern of standing waves. This is called a normal mode. A membrane has an infinite number of these normal modes, starting with a lowest frequency one called the fundamental frequency.
There exist infinitely many ways in which a membrane can vibrate, each depending on the shape of the membrane at some initial time, and the transverse velocity of each point on the membrane at that time. The vibrations of the membrane are given by the solutions of the two-dimensional wave equation with Dirichlet boundary conditions which represent the constraint of the frame. It can be shown that any arbitrarily complex vibration of the membrane can be decomposed into a possibly infinite series of the membrane's normal modes. This is analogous to the decomposition of a time signal into a Fourier series.
The study of vibrations on drums led mathematicians to pose a famous mathematical problem on whether the shape of a drum can be heard, with an answer (it cannot) being given in 1992 in the two-dimensional setting.
Analyzing the vibrating drum head problem explains percussion instruments such as drums and timpani. However, there is also a biological application in the working of the eardrum. From an educational point of view the modes of a two-dimensional object are a convenient way to visually demonstrate the meaning of modes, nodes, antinodes and even quantum numbers. These concepts are important to the understanding of the structure of the atom.
Consider an open disk of radius centered at the origin, which will represent the "still" drum head shape. At any time the height of the drum head shape at a point in measured from the "still" drum head shape will be denoted by which can take both positive and negative values. Let denote the boundary of that is, the circle of radius centered at the origin, which represents the rigid frame to which the drum head is attached.
The mathematical equation that governs the vibration of the drum head is the wave equation with zero boundary conditions,
Due to the circular geometry of , it will be convenient to use polar coordinates Then, the above equations are written as
Here, is a positive constant, which gives the speed at which transverse vibration waves propagate in the membrane. In terms of the physical parameters, the wave speed, c, is given by
where , is the radial membrane resultant at the membrane boundary (), , is the membrane thickness, and is the membrane density. If the membrane has uniform tension, the uniform tension force at a given radius, may be written
where is the membrane resultant in the azimuthal direction.
We will first study the possible modes of vibration of a circular drum head that are axisymmetric. Then, the function does not depend on the angle and the wave equation simplifies to
We will look for solutions in separated variables, Substituting this in the equation above and dividing both sides by yields
The left-hand side of this equality does not depend on and the right-hand side does not depend on it follows that both sides must be equal to some constant We get separate equations for and :
The equation for has solutions which exponentially grow or decay for are linear or constant for and are periodic for . Physically it is expected that a solution to the problem of a vibrating drum head will be oscillatory in time, and this leaves only the third case, so we choose for convenience. Then, is a linear combination of sine and cosine functions,
Turning to the equation for with the observation that all solutions of this second-order differential equation are a linear combination of Bessel functions of order 0, since this is a special case of Bessel's differential equation:
The Bessel function is unbounded for which results in an unphysical solution to the vibrating drum head problem, so the constant must be null. We will also assume as otherwise this constant can be absorbed later into the constants and coming from It follows that
The requirement that height be zero on the boundary of the drum head results in the condition
The Bessel function has an infinite number of positive roots,
We get that for so
Therefore, the axisymmetric solutions of the vibrating drum head problem that can be represented in separated variables are
where
The general case, when can also depend on the angle is treated similarly. We assume a solution in separated variables,
Substituting this into the wave equation and separating the variables, gives
where is a constant. As before, from the equation for it follows that with and
From the equation
we obtain, by multiplying both sides by and separating variables, that
and
for some constant Since is periodic, with period being an angular variable, it follows that
where and and are some constants. This also implies
Going back to the equation for its solution is a linear combination of Bessel functions and With a similar argument as in the previous section, we arrive at
where with the -th positive root of
We showed that all solutions in separated variables of the vibrating drum head problem are of the form
for
A number of modes are shown below together with their quantum numbers. The analogous wave functions of the hydrogen atom are also indicated as well as the associated angular frequencies . The values of are the roots of the Bessel function . This is deduced from the boundary condition which yields .
More values of can easily be computed using the following Python code with the scipy
library: [1]
fromscipyimportspecialasscm=0# order of the Bessel function (i.e. angular mode for the circular membrane)nz=3# desired number of rootsalpha_mn=sc.jn_zeros(m,nz)# outputs nz zeros of Jm
Bessel functions, first defined by the mathematician Daniel Bernoulli and then generalized by Friedrich Bessel, are canonical solutions y(x) of Bessel's differential equation for an arbitrary complex number , which represents the order of the Bessel function. Although and produce the same differential equation, it is conventional to define different Bessel functions for these two values in such a way that the Bessel functions are mostly smooth functions of .
In physics and mathematics, the Lorentz group is the group of all Lorentz transformations of Minkowski spacetime, the classical and quantum setting for all (non-gravitational) physical phenomena. The Lorentz group is named for the Dutch physicist Hendrik Lorentz.
Linear elasticity is a mathematical model as to how solid objects deform and become internally stressed by prescribed loading conditions. It is a simplification of the more general nonlinear theory of elasticity and a branch of continuum mechanics.
Fourier optics is the study of classical optics using Fourier transforms (FTs), in which the waveform being considered is regarded as made up of a combination, or superposition, of plane waves. It has some parallels to the Huygens–Fresnel principle, in which the wavefront is regarded as being made up of a combination of spherical wavefronts whose sum is the wavefront being studied. A key difference is that Fourier optics considers the plane waves to be natural modes of the propagation medium, as opposed to Huygens–Fresnel, where the spherical waves originate in the physical medium.
In mathematics, the associated Legendre polynomials are the canonical solutions of the general Legendre equation
In nuclear physics, the chiral model, introduced by Feza Gürsey in 1960, is a phenomenological model describing effective interactions of mesons in the chiral limit (where the masses of the quarks go to zero), but without necessarily mentioning quarks at all. It is a nonlinear sigma model with the principal homogeneous space of a Lie group as its target manifold. When the model was originally introduced, this Lie group was the SU(N), where N is the number of quark flavors. The Riemannian metric of the target manifold is given by a positive constant multiplied by the Killing form acting upon the Maurer–Cartan form of SU(N).
In continuum mechanics, the finite strain theory—also called large strain theory, or large deformation theory—deals with deformations in which strains and/or rotations are large enough to invalidate assumptions inherent in infinitesimal strain theory. In this case, the undeformed and deformed configurations of the continuum are significantly different, requiring a clear distinction between them. This is commonly the case with elastomers, plastically deforming materials and other fluids and biological soft tissue.
In the mathematical theory of bifurcations, a Hopfbifurcation is a critical point where, as a parameter changes, a system's stability switches and a periodic solution arises. More accurately, it is a local bifurcation in which a fixed point of a dynamical system loses stability, as a pair of complex conjugate eigenvalues—of the linearization around the fixed point—crosses the complex plane imaginary axis as a parameter crosses a threshold value. Under reasonably generic assumptions about the dynamical system, the fixed point becomes a small-amplitude limit cycle as the parameter changes.
Great-circle navigation or orthodromic navigation is the practice of navigating a vessel along a great circle. Such routes yield the shortest distance between two points on the globe.
The Ginzburg–Landau equation, named after Vitaly Ginzburg and Lev Landau, describes the nonlinear evolution of small disturbances near a finite wavelength bifurcation from a stable to an unstable state of a system. At the onset of finite wavelength bifurcation, the system becomes unstable for a critical wavenumber which is non-zero. In the neighbourhood of this bifurcation, the evolution of disturbances is characterised by the particular Fourier mode for with slowly varying amplitude . The Ginzburg–Landau equation is the governing equation for . The unstable modes can either be non-oscillatory (stationary) or oscillatory.
A ratio distribution is a probability distribution constructed as the distribution of the ratio of random variables having two other known distributions. Given two random variables X and Y, the distribution of the random variable Z that is formed as the ratio Z = X/Y is a ratio distribution.
In classical mechanics, holonomic constraints are relations between the position variables that can be expressed in the following form:
Atmospheric tides are global-scale periodic oscillations of the atmosphere. In many ways they are analogous to ocean tides. They can be excited by:
In physics and mathematics, the solid harmonics are solutions of the Laplace equation in spherical polar coordinates, assumed to be (smooth) functions . There are two kinds: the regular solid harmonics, which are well-defined at the origin and the irregular solid harmonics, which are singular at the origin. Both sets of functions play an important role in potential theory, and are obtained by rescaling spherical harmonics appropriately:
In mathematics, the spectral theory of ordinary differential equations is the part of spectral theory concerned with the determination of the spectrum and eigenfunction expansion associated with a linear ordinary differential equation. In his dissertation, Hermann Weyl generalized the classical Sturm–Liouville theory on a finite closed interval to second order differential operators with singularities at the endpoints of the interval, possibly semi-infinite or infinite. Unlike the classical case, the spectrum may no longer consist of just a countable set of eigenvalues, but may also contain a continuous part. In this case the eigenfunction expansion involves an integral over the continuous part with respect to a spectral measure, given by the Titchmarsh–Kodaira formula. The theory was put in its final simplified form for singular differential equations of even degree by Kodaira and others, using von Neumann's spectral theorem. It has had important applications in quantum mechanics, operator theory and harmonic analysis on semisimple Lie groups.
The derivatives of scalars, vectors, and second-order tensors with respect to second-order tensors are of considerable use in continuum mechanics. These derivatives are used in the theories of nonlinear elasticity and plasticity, particularly in the design of algorithms for numerical simulations.
In optics, the Fraunhofer diffraction equation is used to model the diffraction of waves when the diffraction pattern is viewed at a long distance from the diffracting object, and also when it is viewed at the focal plane of an imaging lens.
In mathematics, a linear recurrence with constant coefficients sets equal to 0 a polynomial that is linear in the various iterates of a variable—that is, in the values of the elements of a sequence. The polynomial's linearity means that each of its terms has degree 0 or 1. A linear recurrence denotes the evolution of some variable over time, with the current time period or discrete moment in time denoted as t, one period earlier denoted as t − 1, one period later as t + 1, etc.
The fracture of soft materials involves large deformations and crack blunting before propagation of the crack can occur. Consequently, the stress field close to the crack tip is significantly different from the traditional formulation encountered in the Linear elastic fracture mechanics. Therefore, fracture analysis for these applications requires a special attention. The Linear Elastic Fracture Mechanics (LEFM) and K-field are based on the assumption of infinitesimal deformation, and as a result are not suitable to describe the fracture of soft materials. However, LEFM general approach can be applied to understand the basics of fracture on soft materials. The solution for the deformation and crack stress field in soft materials considers large deformation and is derived from the finite strain elastostatics framework and hyperelastic material models.
Moffatt eddies are sequences of eddies that develop in corners bounded by plane walls due to an arbitrary disturbance acting at asymptotically large distances from the corner. Although the source of motion is the arbitrary disturbance at large distances, the eddies develop quite independently and thus solution of these eddies emerges from an eigenvalue problem, a self-similar solution of the second kind.