W58

Last updated
W58 nuclear warhead
Mk2 RB.png
Diagram of the Mark 2 Reentry Body that housed the W58 thermonuclear warhead
Type Nuclear weapon
Place of origin United States
Production history
Designer Lawrence Livermore National Laboratory
Designed1960 to 1964
ProducedMarch 1964 to June 1967 [1]
No. built1400 [1]
Variants2
Specifications
Mass257 lb (117 kg) [1]
Length40.3 inches (102 cm) [1]
Diameter15.6 in (40 cm) [1]
Blast yield200 kilotonnes of TNT (840 TJ) [1]

The W58 was an American thermonuclear warhead used on the Polaris A-3 submarine-launched ballistic missile. Three W58 warheads were fitted as multiple warheads on each Polaris A-3 missile. [2]

Contents

The W58 was 15.6 inches (400 mm) in diameter and 40.3 inches (1,020 mm) long, and weighed 257 pounds (117 kg). The yield was 200 kilotonnes of TNT (840 TJ). [1] The warhead used the Kinglet primary, which it shared with the W55 and W47 warheads. [3]

The W58 design entered service in 1964 and the last models were retired in 1982 with the last Polaris missiles. [1]

History

The W58 program began in mid-1959 when concerns were raised that enemy defensive capability was increasing due to improved detection capabilities. A study into the problem was conducted and its report released in August 1959 which recommended the development of a cluster warhead system for missile. In November 1959, a follow-up study into the feasibility of a cluster warhead for the Polaris missile began and its report was submitted in January 1960. [4] The report recommended the development of a missile carrying three warheads, mounted on an ejection system to disperse the warheads. The warheads would be released at approximately 200,000 feet (61,000 m) altitude. A protective fairing would protect the warheads during the underwater launch and early flight of the missile. [5]

Two reentry bodies were initially considered. Both were the same basic, slightly flared cylinder, but one had a hemispherical nose made of pyrolytic graphite, and the other an elliptical nose made of either pyrolytic graphite or beryllium. Both designs had an inner wall temperature of 1,500 °F (820 °C) with insulation limiting the warhead temperature to 300 °F (149 °C). A hemispherical shape was eventually chosen. [5]

In July 1960, it was decided that both airburst and surfaceburst fuzing would be provided. Airburst fuzing would be the inertial type, consisting of a range-corrected timer started by a decelerometer. The airburst fuze would be suitable for 95% of the target types envisioned for Polaris, while the remaining targets would be at too high an altitude for the airburst fuze and instead would be destroyed using the surfaceburst fuze. The ability to select surface burst for any target was also included. [5]

The primary safing device was to be a decelerometer that required 10 g (98 m/s2) deceleration for five seconds to actuate. An interlock device to prevent arming of the warhead if it did not separate from the missile was also included. The thermal battery that supplied power to the weapon was designed to actuate when exposed to reentry heating. [6]

Formal approval to develop the warhead was given in July 1960 and the military characteristics approved in August of that year. Lawrence Radiation Laboratory (now Lawrence Livermore National Laboratory) was assigned the warhead, and while the lab's workload was quite heavy at the time, it was believed that the four year development program envisaged (as opposed to the originally envisaged three-year program) would mean that compensatory reductions in other programs would not be needed. [6]

The nomenclature of XW-59 was initially assigned to the weapon, but in October 1960 the weapon was reassigned the nomenclature XW-58 (The XW-58 nomenclature was initially assigned to the Special Atomic Demolition Munition version of the W54 warhead). [7] [8] The department of defense was responsible for all aspects of the weapon except for the warhead itself. Lockheed Missiles and Space Division were assigned development of the reentry body, missile and testing equipment, while the Naval Ordnance Laboratory developed the fuzing and firing system. A flight test program consisting of 14 tests was scheduled for October 1962. Early production was planned for January 1964, with a planned operational availability date of June 1964. [9]

The fuzing system would contain a barometric airburst fuze with three height of burst options, and a surfaceburst fuze. The firing system would be of the explosive-electric transducer type, the warhead would be sealed, and the boosting gas reservoir would be contained in a well that allowed for removal and replacement without breaking the warhead seal. [9] Magnesium instead of titanium was selected for the support casing in March 1961 as it offered minimum weight, ease of machining and moderate resistance to high temperatures. A protective can for the radiation case was provided as no means of sufficiently protecting the radiation case from the environment was known. The explosive-electric transducer was later substituted for a ferromagnetic transducer as the technology had not yet sufficiently advanced. [10]

In August 1961, the proposed ordinance characteristics of the warhead were found to be satisfactory to the Navy. [11] The warhead with reentry body was 23.5 inches (600 mm) wide at the flare, 54 inches (1,400 mm) long and weighed 300 pounds (140 kg). The weapon consisted of a warhead, integrated fuzing and firing system and an outer heat shield surrounding the weapon. The planned pyrolytic graphite was substituted for an ablative heat shield integrated into the warhead structure. [12] The reentry body was known as the Mark 2. [13]

In March 1962, a warhead redesign occurred, leading to the redesigned warhead nomenclature of XW-58-X1. This redesign included close integration of warhead components, including integration of warhead casing with the heat shield and consolidation of the fuzing and firing system into a single unit. This redesign caused the design release date to slip by three months. [14] The Mk 58 Mod 0 was designed released in May 1963, with the exception of the reentry body and primary stage. [15]

In June 1963, the primary stage was replaced following an interim review. The new primary eliminated the mechanical safing system which the navy had expressed vulnerability concerns about. [15] [16] Early production of the Mk 58 Mod 1 warhead began in March 1964 and the first submarine equipped with the warheads was on station in October 1964. [17]

The Mk 58 Mod 2 was proposed in December 1965 to provide resistance to high energy x-rays, but the program was never authorized. [17]

In approximately 1975, corrosion problems were discovered in some W58 warheads. The problem was evaluated with computer modelling rather than nuclear testing. The modelling determined that the problem could be overcome with some minor changes to weapon maintenance. However, the actions taken may have been influenced by the planned retirement date for the weapon. [18]

The warhead was retired in April 1982. [1]

Design

The final warhead consisted of a magnesium case with an aluminium cover. The nylon-phenolic heat shield was bonded to the magnesium case. The warhead cover included two ports for target detecting radar antennas, a baroport for pressure information and a valve to fill the warhead with dry air. The fuze was a single-channel device. The thermal battery and radar antennas were mounted on the warhead flare section. Airburst fuzing was controlled by a timer and baroswitch, with three height of burst options, while surfaceburst fuzing was provided by an electronic radiating type device. [19]

The firing set was of the dual-channel type and the weapon used an external neutron generator. [19] The nuclear system was designed to produce no more than 4 pounds (1.8 kg) yield in the event of a detonation by anything other than the firing system. [7] The safing system included acceleration actuated contacts that closed approximately 55 seconds after launch, at an altitude of 65,000 feet (20,000 m), which connected the warhead electrical system to the thermal battery and programmer. [20]

The warhead used the Kinglet nuclear primary. [16] Weapon yield was 200 kilotonnes of TNT (840 TJ). [1]

The warhead with reentry body was 23.5 inches (600 mm) wide at the flare, 54 inches (1,400 mm) long and weighed 300 pounds (140 kg). [12] The warhead without RB was 15.6 inches (400 mm) in diameter and 40.3 inches (1,020 mm) long, and weighed 257 pounds (117 kg). [1]

See also

Related Research Articles

<span class="mw-page-title-main">WE.177</span> Free-fall gravity nuclear bomb

The WE.177, originally styled as WE 177, and sometimes simply as WE177, was a series of tactical and strategic nuclear weapons with which the Royal Navy (RN) and the Royal Air Force (RAF) were equipped. It was the primary air-dropped nuclear weapon in the United Kingdom from the late 1960s into the 1990s.

<span class="mw-page-title-main">Yellow Sun (nuclear weapon)</span> First British operational high-yield strategic nuclear weapon warhead

Yellow Sun was the first British operational high-yield strategic nuclear weapon warhead. The name refers only to the outer casing; the warhead was known as "Green Grass" in Yellow Sun Mk.1 and "Red Snow" in Yellow Sun Mk.2.

<span class="mw-page-title-main">B53 nuclear bomb</span> American high-yield nuclear gravity bomb

The Mk/B53 was a high-yield bunker buster thermonuclear weapon developed by the United States during the Cold War. Deployed on Strategic Air Command bombers, the B53, with a yield of 9 megatons, was the most powerful weapon in the U.S. nuclear arsenal after the last B41 nuclear bombs were retired in 1976.

<span class="mw-page-title-main">B28 nuclear bomb</span> Nuclear bomb

The B28, originally Mark 28, was a thermonuclear bomb carried by U.S. tactical fighter bombers, attack aircraft and bomber aircraft. From 1962 to 1972 under the NATO nuclear weapons sharing program, American B28s also equipped six Europe-based Canadian CF-104 squadrons known as the RCAF Nuclear Strike Force. It was also supplied for delivery by UK-based Royal Air Force Valiant and Canberra aircraft assigned to NATO under the command of SACEUR. In addition, certain U.S. Navy carrier based attack aircraft such as the A3D Skywarrior, A4D Skyhawk, and A3J Vigilante were equipped to carry the B28.

<span class="mw-page-title-main">B41 nuclear bomb</span> American high-yield thermonuclear weapon

The B-41 was a thermonuclear weapon deployed by the United States Strategic Air Command in the early 1960s. It was the most powerful nuclear bomb ever developed by the United States, with a maximum yield of 25 megatons of TNT. A top secret document, states “The US has stockpiled bombs of 9 MT and 23 MT...” which would likely be referring to the B-41's actual yield(s). The B-41 was the only three-stage thermonuclear weapon fielded by the U.S.

<span class="mw-page-title-main">W54</span> Nuclear warhead used by the US

The W54 was a tactical nuclear warhead developed by the United States in the late 1950s. The weapon is notable for being the smallest nuclear weapon in both weight and yield to have entered US service. It was a compact implosion device containing plutonium-239 as its fissile material, and in its various versions and mods it had a yield of 10 to 1,000 tons of TNT.

<span class="mw-page-title-main">Mark 7 nuclear bomb</span> Nuclear bomb

Mark 7 "Thor" was the first tactical fission bomb adopted by US armed forces. It was also the first weapon to be delivered using the toss method with the help of the low-altitude bombing system (LABS). The weapon was tested in Operation Buster-Jangle. The Mark 7 was fitted with retractable stabilizer fins so it could be carried under fighter-bomber aircraft. The Mark 7 warhead (W7) also formed the basis of the 30.5 inches (775 mm) BOAR rocket, the Mark 90 Betty nuclear depth charge, MGR-1 Honest John rocket, MGM-5 Corporal ballistic missile, and Nike Ajax surface-to-air missile. It was also supplied for delivery by Royal Air Force Canberra aircraft assigned to NATO in Germany under the command of SACEUR. This was done under the auspices of Project E, an agreement between the United States and the UK on the RAF carriage of US nuclear weapons. In UK use it was designated 1,650 lb. H.E. M.C. The Mark 7 was in service from 1952 to 1967(8) with 1700–1800 having been built.

<span class="mw-page-title-main">W50 (nuclear warhead)</span> Nuclear weapon

The W50 was an American thermonuclear warhead deployed on the MGM-31 Pershing theater ballistic missile. Initially developed for the LIM-49 Nike Zeus anti-ballistic missile, this application was cancelled before deployment. The W50 was developed by Los Alamos National Laboratory. The W50 was manufactured from 1963 through 1965, with a total of 280 being produced. They were retired from service starting in 1973 with the last units retired in 1991.

<span class="mw-page-title-main">W87</span> American thermonuclear missile warhead

The W87 is an American thermonuclear missile warhead formerly deployed on the LGM-118A Peacekeeper ("MX") ICBM. 50 MX missiles were built, each carrying up to 10 W87 warheads in multiple independently targetable reentry vehicles (MIRV), and were deployed from 1986 to 2005. Starting in 2007, 250 of the W87 warheads from retired Peacekeeper missiles were retrofitted onto much older Minuteman III missiles, with one warhead per missile.

<span class="mw-page-title-main">W49</span> US thermonuclear warhead of the 1950s and 60s

The W49 was an American thermonuclear warhead, used on the Thor, Atlas, Jupiter, and Titan I ballistic missile systems. W49 warheads were manufactured starting in 1958 and were in service until 1965, with a few warheads being retained until 1975.

The B46 nuclear bomb was an American high-yield thermonuclear bomb which was designed and tested in the late 1950s. It was never deployed. Though originally intended to be a production design, the B46 ended up being only an intermediate prototype of the B-53 and was test fired several times. These prototypes were known as TX-46 units (Test/Experimental).

<span class="mw-page-title-main">W62</span> American thermonuclear warhead designed in the late 1960s

The W62 was an American thermonuclear warhead designed in the 1960s and manufactured from March 1970 to June 1976. Used on some Minuteman III ICBMs, it was partially replaced by the W78 starting in December 1979, and fully replaced by W87 warheads removed from MX Peacekeeper missiles and retired in 2010.

<span class="mw-page-title-main">W56</span> American thermonuclear warhead designed in the late 1950s/early 1960s

The W56 was an American thermonuclear warhead produced starting in 1963 which saw service until 1993, on the Minuteman I and II ICBMs.

<span class="mw-page-title-main">Mark 39 nuclear bomb</span> Thermonuclear warhead

The Mark 39 nuclear bomb and W39 nuclear warhead were versions of an American thermonuclear weapon, which were in service from 1957 to 1966.

<span class="mw-page-title-main">W59</span> American thermonuclear missile warhead

The W59 was an American thermonuclear warhead used on some Minuteman I ICBM missiles from 1962 to 1969, and planned to be used on the cancelled GAM-87 Skybolt air-launched ballistic missile.

The W38 was an American thermonuclear warhead used in the early to mid-1960s as a warhead for Atlas E and F, and LGM-25 Titan I ICBMs. It was first built in 1961 and was in service from 1961 to 1965. 70 were deployed on Titan I missiles and 110 on Atlas missiles. It used the Avco Mark 4 reentry vehicle.

Kinglet was a boosted fission primary used in several American thermonuclear weapons.

<span class="mw-page-title-main">UUM-44 SUBROC</span> United States Navy nuclear warhead anti-submarine rocket (1964–1989)

The UUM-44 SUBROC was a type of submarine-launched rocket deployed by the United States Navy as an anti-submarine weapon. It carried a 250 kiloton thermonuclear warhead configured as a nuclear depth bomb.

The W60 was nuclear warhead developed for the United States Navy's long range Typhon LR surface-to-air missile.

The Starling was a small American nuclear bomb developed in the 1950s that was used as the primary in several US thermonuclear weapons.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 Sublette, Carey (12 June 2020). "Complete List of All U.S. Nuclear Weapons". Nuclear Weapon Archive. Archived from the original on 2009-02-27. Retrieved 2021-03-18.
  2. ↑ History of the Mk 58 Warhead (Report). Sandia National Laboratory. February 1968. p. 5-6. SC-M-68-50. Archived from the original on 2022-06-12.
  3. ↑ Hansen, Chuck (2007). Swords of Armageddon - Volume V. Chukelea Publications. p. 15. ISBN   978-0-9791915-5-8.
  4. ↑ History of the Mk 58 Warhead, p. 3, 5.
  5. 1 2 3 History of the Mk 58 Warhead, p. 6.
  6. 1 2 History of the Mk 58 Warhead, p. 7.
  7. 1 2 History of the Mk 58 Warhead, p. 8.
  8. ↑ History of the Mk 54 Weapon (Report). Sandia National Labs. February 1968. p. 18. Archived from the original on 2021-05-22. Retrieved 2021-03-24.
  9. 1 2 History of the Mk 58 Warhead, p. 9.
  10. ↑ History of the Mk 58 Warhead, p. 10.
  11. ↑ History of the Mk 58 Warhead, p. 10-11.
  12. 1 2 History of the Mk 58 Warhead, p. 11.
  13. ↑ Hansen, Chuck (2007). Swords of Armageddon - Volume VII. Chukelea Publications. p. 455. ISBN   978-0-9791915-7-2.
  14. ↑ History of the Mk 58 Warhead, p. 11-12.
  15. 1 2 History of the Mk 58 Warhead, p. 13.
  16. 1 2 Swords of Armageddon - Volume VII, p. 455.
  17. 1 2 History of the Mk 58 Warhead, p. 4.
  18. ↑ Swords of Armageddon - Volume VII, p. 458.
  19. 1 2 History of the Mk 58 Warhead, p. 16-17.
  20. ↑ History of the Mk 58 Warhead, p. 14.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.