APC series

Last updated
Logo of NEC APC (Advanced Personal Computer) series NEC-APC-logo.svg
Logo of NEC APC (Advanced Personal Computer) series

The APC (Advanced Personal Computer) was a series of business microcomputers released outside of Japan by the NEC Corporation. [1] The series comprised the APC, the APC II and APC III, international versions of models from the Japanese NEC N5200 series(jp). [2]

Contents

The 8086-based N5200, released in 1981, was the first computer to use the NEC μPD7220 High-Performance Graphics Display Controller. [3]

The better-known PC-9800 series, released a year later by the different division, had a similar architecture to the original N5200 and used many of the same components. The most significant differences between the two were that the PC-9801 had slightly lower vertical screen resolution, graphics were standard instead of optional (still using a second μPD7220) and it used 5.25" floppy drives instead of 8".

The APC IV, despite sharing the series name, was an ordinary IBM PC/AT compatible and not compatible with the earlier APC models.

N5200

The NEC APC, the first of the series NEC APC CP M and DOS machine. Ran DOS 2.2 off 8" floppies. (8021910227).jpg
The NEC APC, the first of the series

The N5200 is a series of personal computers released in 1981. The APC is a version of the N5200 that was sold outside Japan. [4]

Although its computer architecture is very similar to the PC-98, it was developed and marketed in a different way. At that time, NEC was a vertical integrated company as seen in other big Japanese companies, and intended to open new business. The management allowed a few divisions to start a new computer business, so each divisions developed own computer systems for different markets. The N5200 was marketed as a personal computer which could be used as both a standalone computer and a computer terminal for ACOS mainframe platforms. It was developed by the Terminal Units Division who developed computer terminals for mainframes, but the PC-98 was developed by the Small Systems Division who developed standalone enterprise systems. The position of the N5200 is similar to IBM 3270 PC, but there is significant difference that the N5200 didn't offer the PC-98 compatibility instead it had own software library.

As of 1982, both CP/M-86 and MS-DOS lacked task switching and an ISAM support, so NEC developed a proprietary operating system for the N5200, called PTOS. [5] PTOS was ported to the PC-98 in the early 1990s, and the N5200 computer line was absorbed.

APC

APC
NEC-APC-badge.svg
NEC APC.jpg
The NEC APC (1982)
Manufacturer Nippon Electric (NEC)
Type Personal computer
Release date1982;42 years ago (1982) (APC)
Introductory priceStarting from US$3,298
Operating system CP/M-86, MS-DOS
CPU 8086 @ 5 MHz
Memory128 to 256 kilobytes
Removable storage Floppy discs
Display12" CRT, monochrome or color; 80 × 25 characters text, 8 colors; (640 × 494 with optional hardware)
Graphics μPD7220
Connectivity Parallel port, RS-232

The first APC was released in 1982 [6] at $3,298 for a single-floppy monochrome system or $4,998 for a dual-floppy color system. [7] [8] [9] It used a 16-bit NEC μPD 8086 CPU with 128 KB of RAM (expandable to 256 KB), 8 KB of ROM, and 4 KB of battery-backed CMOS RAM, a clock/calendar chip, parallel printer and RS-232 serial interfaces, and one or two built-in 8" floppy diskette drives [4] supporting both single-sided single-density (243 KB) and double-sided double-density (1 MB) formats. (An external 10 MB hard disk drive was also available. [10] [4] ) The detachable keyboard had 86 keys (including the numeric keypad) and an additional 22 function keys. [11]

Display

A built-in 12" monochrome or 8-colour display was driven by an NEC μPD7220 display controller generating an 80 × 25 character display. An additional line at the top of the screen displayed status information. Each character was displayed in an 8 × 19 dot cell (giving 640 × 475 screen resolution) and could be one of 250 predefined 7 × 11 glyphs from ROM or 256 user-defined 8 × 16 glyphs from RAM. Each character cell also had an attribute byte indicating the colour (or, for monochrome screens, whether it was highlighted or not) and any mix of reverse video, blinking, over-bar, under-bar and blanked (not displayed). [11]

The optional graphics board [12] adds a second μPD7220 graphics controller with up to 512 KB memory displaying 640 × 494 graphics that overlay the text screen output. (This is higher than the resolution of the user-addressable text screen because graphics can overlay the status line as well.) The graphics controller allows panning the screen over the display memory, zooming, independent scrolling of different screen areas and other graphics functions. A light pen can be used for input. [8]

Software

Operating systems included CP/M-86 and MS-DOS. [7] [13] [14]

APC III

APC III
NEC-APC-3-logo.svg
Manufacturer Nippon Electric (NEC)
Type Personal computer
Release date1984;40 years ago (1984) (APC III)
Operating system MS-DOS 2.11
CPU 8086 @ 8 MHz
Memory128  kilobytes and higher
Removable storage Floppy discs
DisplayNTSC TV or monitor; 80 × 25 characters; 8 colors; 640 × 200, 640 × 400
Graphics μPD7220
Connectivity Parallel port, RS-232 x1 with 2 more serial via an expansion card

The APC III [15] (Advanced Personal Computer) was released by NEC in 1984. [16] [17] An update on the NEC APC II, which replaced the original NEC APC, all the NEC APC models utilized the Intel 8086 processor, unlike the IBM PC and clones.

The unit was physically smaller than an IBM-PC. The compact case included two 514" half-height disks (two floppies or one floppy and one hard disk), and space for standard options (hard disk controller, additional video memory). Special options (including additional system memory) required using expansion slots, of which four were available.

C-bus expansion cards (PCBs) could be inserted without removal of the exterior case, as was required for the IBM PC.[ citation needed ]

The entire computer could be disassembled to functional blocks (e.g.: expansion card cage, power supply, disk drive cage) with removal of a few easy access screws. Other components didn't even need a screwdriver, except for the outer case, by using robust plastic clips. The disk cage could be further disassembled if required. [ citation needed ]

As with the IBM PC, the maximum usable memory was 640 KB (the address range of the Intel 8088 and 8086 is 1 MB). The APC came with 128 KB standard.

Specification

FeatureAPC-IIIIBM-PC
Speed8 MHz4.77 MHz
Resolution640 × 400640 × 200
Storage (floppy)720 KB (80 track, DD)320 KB (40 track, DD)

Hardware

Interfaces

RS-232 serial, 'Centronics' parallel and video interfaces were built onto the motherboard, whereas expansion cards were required for almost every function of an IBM PC except for the CPU, BIOS and built-in RAM. [ citation needed ]

Display

Maximum display capabilities were a text mode of 80 × 25 characters (with four planes) and/or graphics at 640 × 400 pixels (with two planes). [18] Either text, graphics, or graphics with text overlay were software selectable. The base one bit-per-pixel[ citation needed ] was easily upgradeable to three bits per pixel (taking the graphics mode from monochrome to either eight colours or eight shades of grey). The computer was capable of running monochrome (or grey) through an NTSC TV monitor, although this was not recommended (text reduced to 40 × 20, graphics to 640 × 200). Monochrome (usually green) or color screens were usually included in the price. The APC III's 'on-board' video controller meant that upgrades (other than internally mounted video memory) could not be achieved, and the display was stuck at 640 × 400 with 8 colors.

The NEC APC series supported a proprietary NEC APC character set and user-definable fonts in text mode.[ citation needed ]

Expansion bus

The expansion bus supported 16-bit-wide data and 20-bit-wide address capability. By comparison, the original IBM supported an 8-bit data bus with 20-bit address, which was later revised to 16 data bits and 24 address bits in the PC AT.

The motherboard was designed to allow easy addition of an 8087 math co-processor.[ citation needed ]

Disk drives

Most Australian units were shipped with 720 KB floppy disk drives (80 track, double density), although specifications imply the drives were only 360 KB [19] (40 track, DD). 360 KB disks were readable and writeable by 'double-stepping' the 720 KB drives.

Users could also purchase a hard disk expansion option. This was initially limited to the 10 MB ST-506 hard disks. This capacity could be increased to 20 MB (but no higher) after upgrading to MS-DOS 3.1. [20]

The hard disk controller was only configured to operate a single internal hard disk. An external hard disk expansion port was available, so you could have two floppies and an external hard drive, or one floppy with an internal hard drive.

Operating systems

Shipped standard with MS-DOS 2.11, [21] other operating systems were available, such as the Unix derivative, PC-UX. Later, MS DOS 3.1 was released for the APC.[ citation needed ]

Compatibility

The APC III was not fully compatible with the IBM-PC, either on a hardware level (although some parts were compatible), or a software level (although again, some software was compatible).

Later on NEC released the SLE card, or 'Software Library Expander', that was essentially an IBM PC on an expansion board, although graphics was limited to CGA only, quite a step down from the native graphics.

The earlier penetration of the market saw PC clones adopt the IBM PC architecture. In the export markets, NEC fell into line with the 16-bit IBM-AT architecture and did not pursue the APC-III architecture any further.

APC IV

APC IV
NEC-APC-4-logo.svg
Manufacturer Nippon Electric (NEC)
Type Personal computer
Release date1986;38 years ago (1986) (APC IV)
CPU Intel 80286 @ 10 MHz
Memory640  kilobytes to 1MB
StorageHard drive

The APC IV, released in 1986, was an IBM PC/AT clone that was not designed to be compatible with previous APC models. [22] [23]

See also

Related Research Articles

<span class="mw-page-title-main">Aster CT-80</span> 1982 personal computer

The Aster CT-80 is a 1982 personal computer developed by the small Dutch company MCP, was sold in its first incarnation as a kit for hobbyists. Later it was sold ready to use. It consisted of several Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration. It was the first commercially available Dutch personal/home computer. The Aster computer could use the software written for the popular Tandy TRS-80 computer while fixing many of the problems of that computer, but it could also run CP/M software, with a large amount of free memory Transient Program Area, (TPA) and a full 80×25 display, and it could be used as a Videotext terminal. Although the Aster was a clone of the TRS-80 Model I it was in fact more compatible with the TRS-80 Model III and ran all the software of these systems including games. It also had a built-in speaker which was compatible with such games software.

<span class="mw-page-title-main">IBM Personal Computer</span> Personal computer model released in 1981

The IBM Personal Computer is the first microcomputer released in the IBM PC model line and the basis for the IBM PC compatible de facto standard. Released on August 12, 1981, it was created by a team of engineers and designers at International Business Machines (IBM), directed by William C. Lowe and Philip Don Estridge in Boca Raton, Florida.

<span class="mw-page-title-main">Tandy 1000</span> IBM PC compatible home computer system

The Tandy 1000 is the first in a line of IBM PC compatible home computer systems produced by the Tandy Corporation for sale in its Radio Shack and Radio Shack Computer Center chains of stores. Introduced in 1984, the product line was aimed at providing affordable but capable systems for home computing or education, with some of its Tandy specific features like graphics, sound and joystick port making it more appealing for home use.

<span class="mw-page-title-main">IBM PS/2</span> Second generation of personal computers by IBM

The Personal System/2 or PS/2 is IBM's second generation of personal computers. Released in 1987, it officially replaced the IBM PC, XT, AT, and PC Convertible in IBM's lineup. Many of the PS/2's innovations, such as the 16550 UART, 1440 KB 3.5-inch floppy disk format, 72-pin SIMMs, the PS/2 port, and the VGA video standard, went on to become standards in the broader PC market.

<span class="mw-page-title-main">Tandy 2000</span> Personal computer by Radio Shack

The Tandy 2000 is a personal computer introduced by Radio Shack in September 1983 based on the 8 MHz Intel 80186 microprocessor running MS-DOS. By comparison, the IBM PC XT used the older 4.77 MHz Intel 8088 processor, and the IBM PC/AT would later use the newer 6 MHz Intel 80286. Due to the 16-bit data bus and more efficient instruction decoding of the 80186, the Tandy 2000 ran significantly faster than other PC compatibles, and slightly faster than the PC AT. The Tandy 2000 was the company's first computer built around an Intel x86 series microprocessor; previous models used the Zilog Z80 and Motorola 6809 CPUs.

<span class="mw-page-title-main">PC1512</span> 1986 PC-compatible microcomputer

The Amstrad PC1512 was Amstrad's mostly IBM PC-compatible computer system, first manufactured in 1986. Next year a slight updated version named PC1640 was introduced. It was also marketed as PC6400, and Sinclair PC500. Schneider branded machines for the German market also exists.

<span class="mw-page-title-main">Compaq Portable series</span> Laptop manufacturer

Compaq's first computers' form factors were portable, also called "luggables", and then "lunchbox computers", and together constituted the Compaq Portable series. These computers measured approximately 16 inches (410 mm) deep, 8 inches (200 mm) tall, and approximately 20 inches (510 mm) wide. As the products evolved, laptops and notebooks were created offing a new level of portability that caused the market to explode.

<span class="mw-page-title-main">Rainbow 100</span> DEC microcomputer

The Rainbow 100 is a microcomputer introduced by Digital Equipment Corporation (DEC) in 1982. This desktop unit had a monitor similar to the VT220 and a dual-CPU box with both 4 MHz Zilog Z80 and 4.81 MHz Intel 8088 CPUs. The Rainbow 100 was a triple-use machine: VT100 mode, 8-bit CP/M mode, and CP/M-86 or MS-DOS mode using the 8088. It ultimately failed to in the marketplace which became dominated by the simpler IBM PC and its clones which established the industry standard as compatibility with CP/M became less important than IBM PC compatibility. Writer David Ahl called it a disastrous foray into the personal computer market. The Rainbow was launched along with the similarly packaged DEC Professional and DECmate II which were also not successful. The failure of DEC to gain a significant foothold in the high-volume PC market would be the beginning of the end of the computer hardware industry in New England, as nearly all computer companies located there were focused on minicomputers for large organizations, from DEC to Data General, Wang, Prime, Computervision, Honeywell, and Symbolics Inc.

<span class="mw-page-title-main">PC-98</span> Series of PCs by NEC, sold primarily in Japan

The PC-9800 series, commonly shortened to PC-98 or 98, is a lineup of Japanese 16-bit and 32-bit personal computers manufactured by NEC from 1982 to 2000. The platform established NEC's dominance in the Japanese personal computer market, and, by 1999, more than 18 million units had been sold. While NEC did not market these specific machines in the West, it sold the NEC APC series, which had similar hardware to early PC-98 models.

<span class="mw-page-title-main">Leading Edge Model D</span> PC marketed by Leading Edge Hardware

The Leading Edge Model D is an IBM clone first released by Leading Edge Hardware in July 1985. It was initially priced at $1,495 and configured with dual 5.25" floppy drives, 256 KB of RAM, and a monochrome monitor. It was manufactured by South Korean conglomerate Daewoo and distributed by Canton, Massachusetts-based Leading Edge. Engineer Stephen Kahng spent about four months designing the Model D at a cost of $200,000. Kahng later became CEO of Macintosh clone maker Power Computing.

The Z-100 computer is a personal computer made by Zenith Data Systems (ZDS). It was a competitor to the IBM PC.

<span class="mw-page-title-main">Tulip System-1</span> A 16-bit personal computer based on the Intel 8086 and made by Tulip Computers

The Tulip System I is a 16-bit personal computer based on the Intel 8086 and made by Tulip Computers, formerly an import company for the Exidy Sorcerer, called Compudata Systems.

<span class="mw-page-title-main">Epson Equity</span> Series of IBM PC Compatibles

The Epson Equity series of IBM Compatible Personal Computers was manufactured from 1985 until the early '90s by Epson Inc. Epson was well known for its dot matrix printers at the time and the Equity series represents their entry into the growing PC compatible market. The Equity I was the first system introduced, equipped with an Intel 8088 CPU and one or two 5.25" floppy disk drives.

<span class="mw-page-title-main">History of laptops</span>

The history of laptops describes the efforts, begun in the 1970s, to build small, portable Personal Computers that combine the components, inputs, outputs and capabilities of a Desktop Computer in a small chassis.

<span class="mw-page-title-main">Olivetti M24</span> Computer sold by Olivetti in 1983 using the Intel 8086 CPU

The Olivetti M24 is a computer that was sold by Olivetti in 1983 using the Intel 8086 CPU.

<span class="mw-page-title-main">IBM Personal Computer XT</span> Personal computer model released in 1983

The IBM Personal Computer XT is the second computer in the IBM Personal Computer line, released on March 8, 1983. Except for the addition of a built-in hard drive and extra expansion slots, it is very similar to the original IBM PC model 5150 from 1981.

<span class="mw-page-title-main">Olivetti M20</span> Z8000 based computer designed by Italian company Olivetti

The Olivetti M20 is a Zilog Z8000 based computer designed and released by Olivetti in 1982. Although it offered good performance, it suffered from a lack of software due to its use of the Z8000 processor and custom operating system, PCOS. The company introduced the IBM PC compatible Olivetti M24 in 1983 and the M20 line was phased out.

Toshiba Pasopia 16 or PA7020 is an IBM PC compatible computer from manufacturer Toshiba, released in 1982 and based around a Intel 8088-2 microprocessor running at 6 MHz.

<span class="mw-page-title-main">IBM PS/2 Model 30</span> 1987 IBM desktop computer

The Personal System/2 Model 30 and Personal System/2 Model 30 286 are IBM's entry-level desktop computers in their Personal System/2 (PS/2) family of personal computers. As opposed to higher-end entries in the PS/2 line which use Micro Channel bus architecture, the Model 30 features an Industry Standard Architecture bus, allowing it to use expansion cards from its direct predecessors, the PC/XT and the PC/AT. The original PS/2 Model 30 is built upon the Intel 8086 microprocessor clocked at 8 MHz; the Model 30 286 features the Intel 80286 clocked at 10 MHz.

<span class="mw-page-title-main">Dimension 68000</span> Microcomputer introduced by the Micro Craft Corporation in 1983

The Dimension 68000 is a microcomputer introduced by the Micro Craft Corporation in 1983 that sought to emulate the Apple II, the IBM PC, and various CP/M-centric computers through a family of coprocessor expansion cards and emulation software. The Dimension 68000 can also run as a standalone computer based on the Motorola 68000 from which it gets its namesake. The computer is mostly the brainchild of Mike Carpenter, a former executive of a scientific instrument manufacturer who incorporated Micro Craft in Dallas, Texas, to develop the Dimension 68000. It had a market lifespan of three years and received mixed, mostly positive, reception from the technology press. Criticism was leveled at the $6,250 price tag for the computer with the full deck of coprocessor cards, as well as the extent of the emulation power of those cards.

References

  1. "NEC APC". www.ricomputermuseum.org. Retrieved 2022-11-25.
  2. "Daves Old Computers - Nippon Electric Company - APC". Daves Old Computers. Archived from the original on 2021-04-20. Retrieved 2021-11-02.
  3. 田辺皓正, ed. (1983-04-30). マイクロコンピュータシリーズ15 8086マイクロコンピュータ (in Japanese). 丸善株式会社. p. 254.
  4. 1 2 3 "DAVES OLD COMPUTERS- Nippon Electric Company - APC". dunfield.classiccmp.org. Retrieved 2022-11-25.
  5. 内田, 幸久; 田沼, 憲雄 (1983-03-21). "EDPの世界と親和性を持つパーソナル・コンピュータ用OS —PTOS EX—". Nikkei Computer (in Japanese). Nikkei McGraw-Hill: 170–183. ISSN   0285-4619.
  6. "APC NEC". www.old-computers.com. Retrieved 2022-11-25.
  7. 1 2 "Necis [sic] Joins 16-Bit Auction By Releasing APC System". Computerworld : 45–46. 1982-05-31. (NB. The article contains an obvious transmission error, the company's name is NEC Information Systems, Inc., not Necis.)
  8. 1 2 "NEC APC - Advanced Personal Computer". www.oldcomputers.net. 2021-11-05. Archived from the original on 2021-07-28. Retrieved 2021-11-05.
  9. "NEC Information Systems Inc. (Lexington, Mass.)". Classic Tech. 2014-08-06. Archived from the original on 2021-10-26. Retrieved 2021-11-05.
  10. APC Hard Disk Subsystem Reference Guide. Lexington, MA: NEC Information Systems, Inc. 1983.
  11. 1 2 APC System Reference Guide (Revised - March 1983 ed.). Lexington, MA: NEC Information Systems, Inc. September 1982.
  12. Inc, InfoWorld Media Group (1983-03-21). InfoWorld. InfoWorld Media Group, Inc.{{cite book}}: |last= has generic name (help)
  13. CP/M-86 User/Programmer's Guide. NEC Information Systems Inc. 1983.
  14. MS-DOS System Reference Guide. NEC Information Systems, Inc. 1983.
  15. "APC III NEC". www.old-computers.com. Retrieved 2022-11-25.
  16. "日電、パソコンの対米輸出に本腰、ソフトは現地社から、TVなどで大規模宣伝も。" [NEC is now committed to breaking into the U.S. with their PC . Its software will be available from the U.S. subsidiary and the advert will be broadcast widely.]. 日本経済新聞 (The Nikkei) (in Japanese). 日本経済新聞社. 1984-07-09. p. 11. NEC has released the APC-3 in the United States. Its features are similar to the PC-9800 series.
  17. Inc, InfoWorld Media Group (1985-02-25). InfoWorld. InfoWorld Media Group, Inc.{{cite book}}: |last= has generic name (help)
  18. "APC-III System Reference Guide, Section 4 (Display Controllers)", NEC Information Systems March 1985
  19. "APC-III System Reference Guide, Section 1 (Hardware Overview)", NEC Information Systems March 1985
  20. "APC-III System Reference Guide, Section 2 (System Board) Figure 2.21 (hand-written notes)", NEC Information Systems March 1985
  21. NEC APC III, n.d., retrieved 2022-11-25
  22. "Competing at the Top: High-Performance ATs". PC Magazine. Vol. 6, no. 2. 1987-02-21. pp. 194–195. Retrieved 2021-11-05.
  23. Inc, InfoWorld Media Group (1986-10-06). InfoWorld. InfoWorld Media Group, Inc.{{cite book}}: |last= has generic name (help)

Further reading