Activated complex

Last updated
Reaction coordinate diagram showing the activated complex in the region with highest potential energy. Ac com.svg
Reaction coordinate diagram showing the activated complex in the region with highest potential energy.

In chemistry, an activated complex represents a collection of intermediate structures in a chemical reaction when bonds are breaking and forming. The activated complex is an arrangement of atoms in an arbitrary region near the saddle point of a potential energy surface. [1] The region represents not one defined state, but a range of unstable configurations that a collection of atoms pass through between the reactants and products of a reaction. Activated complexes have partial reactant and product character, which can significantly impact their behaviour in chemical reactions. [2]

Contents

The terms activated complex and transition state are often used interchangeably, but they represent different concepts. [3] Transition states only represent the highest potential energy configuration of the atoms during the reaction, while activated complex refers to a range of configurations near the transition state. In a reaction coordinate, the transition state is the configuration at the maximum of the diagram while the activated complex can refer to any point near the maximum.

Transition state theory (also known as activated complex theory) studies the kinetics of reactions that pass through a defined intermediate state with standard Gibbs energy of activation ΔG°. [4] The transition state, represented by the double dagger symbol represents the exact configuration of atoms that has an equal probability of forming either the reactants or products of the given reaction. [5]

The activation energy is the minimum amount of energy to initiate a chemical reaction and form the activated complex. [6] The energy serves as a threshold that reactant molecules must surpass to overcome the energy barrier and transition into the activated complex. Endothermic reactions absorb energy from the surroundings, while exothermic reactions release energy. Some reactions occur spontaneously, while others necessitate an external energy input. The reaction can be visualized using a reaction coordinate diagram to show the activation energy and potential energy throughout the reaction.

Activated complexes were first discussed in transition state theory (also called activated complex theory), which was first developed by Eyring, Evans, and Polanyi in 1935. [7]

Reaction rate

Transition state theory

Transition state theory explains the dynamics of reactions. The theory is based on the idea that there is an equilibrium between the activated complex and reactant molecules. The theory incorporates concepts from collision theory, which states that for a reaction to occur, reacting molecules must collide with a minimum energy and correct orientation. The reactants are first transformed into the activated complex before breaking into the products. [6] From the properties of the activated complex and reactants, the reaction rate constant is

where K is the equilibrium constant, is the Boltzmann constant, T is the thermodynamic temperature, and h is the Planck constant. [8] Transition state theory is based on classical mechanics, as it assumes that as the reaction proceeds, the molecules will never return to the transition state. [9]

Symmetry

An activated complex with high symmetry can decrease the accuracy of rate expressions. [10] Error can arise from introducing symmetry numbers into the rotational partition functions for the reactants and activated complexes. To reduce errors, symmetry numbers can by omitted by multiplying the rate expression by a statistical factor:

where the statistical factor is the number of equivalent activated complexes that can be formed, and the Q are the partition functions from the symmetry numbers that have been omitted. [10]

The activated complex is a collection of molecules that forms and then explodes along a particular internal normal coordinate. Ordinary molecules have three translational degrees of freedom, and their properties are similar to activated complexes. However, activated complexed have an extra degree of translation associated with their approach to the energy barrier, crossing it, and then dissociating. [8]

See also

Related Research Articles

<span class="mw-page-title-main">Chemical reaction</span> Process that results in the interconversion of chemical species

A chemical reaction is a process that leads to the chemical transformation of one set of chemical substances to another. When chemical reactions occur, the atoms are rearranged and the reaction is accompanied by an energy change as new products are generated. Classically, chemical reactions encompass changes that only involve the positions of electrons in the forming and breaking of chemical bonds between atoms, with no change to the nuclei, and can often be described by a chemical equation. Nuclear chemistry is a sub-discipline of chemistry that involves the chemical reactions of unstable and radioactive elements where both electronic and nuclear changes can occur.

<span class="mw-page-title-main">Activation energy</span> Minimum amount of energy that must be provided for a system to undergo a reaction or process

In the Arrhenius model of reaction rates, activation energy is the minimum amount of energy that must be available to reactants for a chemical reaction to occur. The activation energy (Ea) of a reaction is measured in kilojoules per mole (kJ/mol) or kilocalories per mole (kcal/mol). Activation energy can be thought of as the magnitude of the potential barrier (sometimes called the energy barrier) separating minima of the potential energy surface pertaining to the initial and final thermodynamic state. For a chemical reaction to proceed at a reasonable rate, the temperature of the system should be high enough such that there exists an appreciable number of molecules with translational energy equal to or greater than the activation energy. The term "activation energy" was introduced in 1889 by the Swedish scientist Svante Arrhenius.

In physical chemistry, the Arrhenius equation is a formula for the temperature dependence of reaction rates. The equation was proposed by Svante Arrhenius in 1889, based on the work of Dutch chemist Jacobus Henricus van 't Hoff who had noted in 1884 that the van 't Hoff equation for the temperature dependence of equilibrium constants suggests such a formula for the rates of both forward and reverse reactions. This equation has a vast and important application in determining the rate of chemical reactions and for calculation of energy of activation. Arrhenius provided a physical justification and interpretation for the formula. Currently, it is best seen as an empirical relationship. It can be used to model the temperature variation of diffusion coefficients, population of crystal vacancies, creep rates, and many other thermally induced processes and reactions. The Eyring equation, developed in 1935, also expresses the relationship between rate and energy.

<span class="mw-page-title-main">Enantiomer</span> Stereoisomers that are nonsuperposable mirror images of each other

In chemistry, an enantiomer – also called optical isomer, antipode, or optical antipode – is one of two stereoisomers that are nonsuperposable onto their own mirror image. Enantiomers of each other are much like one's right and left hands; without mirroring one of them, hands cannot be superposed onto each other. It is solely a relationship of chirality and the permanent three-dimensional relationships among molecules or other chemical structures: no amount of re-orientiation of a molecule as a whole or conformational change converts one chemical into its enantiomer. Chemical structures with chirality rotate plane-polarized light. A mixture of equal amounts of each enantiomer, a racemic mixture or a racemate, does not rotate light.

<span class="mw-page-title-main">Reaction rate</span> Speed at which a chemical reaction takes place

The reaction rate or rate of reaction is the speed at which a chemical reaction takes place, defined as proportional to the increase in the concentration of a product per unit time and to the decrease in the concentration of a reactant per unit time. Reaction rates can vary dramatically. For example, the oxidative rusting of iron under Earth's atmosphere is a slow reaction that can take many years, but the combustion of cellulose in a fire is a reaction that takes place in fractions of a second. For most reactions, the rate decreases as the reaction proceeds. A reaction's rate can be determined by measuring the changes in concentration over time.

<span class="mw-page-title-main">Transition state</span> Configuration of a chemical reaction when potential energy is greatest

In chemistry, the transition state of a chemical reaction is a particular configuration along the reaction coordinate. It is defined as the state corresponding to the highest potential energy along this reaction coordinate. It is often marked with the double dagger (‡) symbol.

In physical organic chemistry, a kinetic isotope effect (KIE) is the change in the reaction rate of a chemical reaction when one of the atoms in the reactants is replaced by one of its isotopes. Formally, it is the ratio of rate constants for the reactions involving the light (kL) and the heavy (kH) isotopically substituted reactants (isotopologues): KIE = kL/kH.

In organic chemistry, a cycloaddition is a chemical reaction in which "two or more unsaturated molecules combine with the formation of a cyclic adduct in which there is a net reduction of the bond multiplicity". The resulting reaction is a cyclization reaction. Many but not all cycloadditions are concerted and thus pericyclic. Nonconcerted cycloadditions are not pericyclic. As a class of addition reaction, cycloadditions permit carbon–carbon bond formation without the use of a nucleophile or electrophile.

<span class="mw-page-title-main">Reaction coordinate</span> Abstract coordinate depicting chemical reaction progress

In chemistry, a reaction coordinate is an abstract one-dimensional coordinate chosen to represent progress along a reaction pathway. Where possible it is usually a geometric parameter that changes during the conversion of one or more molecular entities, such as bond length or bond angle. For example, in the homolytic dissociation of molecular hydrogen, an apt choice would be the coordinate corresponding to the bond length. Non-geometric parameters such as bond order are also used, but such direct representation of the reaction process can be difficult, especially for more complex reactions.

<span class="mw-page-title-main">Collision theory</span> Chemistry principle

Collision theory is a principle of chemistry used to predict the rates of chemical reactions. It states that when suitable particles of the reactant hit each other with the correct orientation, only a certain amount of collisions result in a perceptible or notable change; these successful changes are called successful collisions. The successful collisions must have enough energy, also known as activation energy, at the moment of impact to break the pre-existing bonds and form all new bonds. This results in the products of the reaction. The activation energy is often predicted using the Transition state theory. Increasing the concentration of the reactant brings about more collisions and hence more successful collisions. Increasing the temperature increases the average kinetic energy of the molecules in a solution, increasing the number of collisions that have enough energy. Collision theory was proposed independently by Max Trautz in 1916 and William Lewis in 1918.

In chemical kinetics, a reaction rate constant or reaction rate coefficient is a proportionality constant which quantifies the rate and direction of a chemical reaction by relating it with the concentration of reactants.

<span class="mw-page-title-main">Potential energy surface</span> Function describing the energy of a physical system in terms of certain parameters

A potential energy surface (PES) or energy landscape describes the energy of a system, especially a collection of atoms, in terms of certain parameters, normally the positions of the atoms. The surface might define the energy as a function of one or more coordinates; if there is only one coordinate, the surface is called a potential energy curve or energy profile. An example is the Morse/Long-range potential.

The Rice–Ramsperger–Kassel–Marcus (RRKM) theory is a theory of chemical reactivity. It was developed by Rice and Ramsperger in 1927 and Kassel in 1928 and generalized in 1952 by Marcus who took the transition state theory developed by Eyring in 1935 into account. These methods enable the computation of simple estimates of the unimolecular reaction rates from a few characteristics of the potential energy surface.

In theoretical chemistry, Marcus theory is a theory originally developed by Rudolph A. Marcus, starting in 1956, to explain the rates of electron transfer reactions – the rate at which an electron can move or jump from one chemical species (called the electron donor) to another (called the electron acceptor). It was originally formulated to address outer sphere electron transfer reactions, in which the two chemical species only change in their charge with an electron jumping (e.g. the oxidation of an ion like Fe2+/Fe3+), but do not undergo large structural changes. It was extended to include inner sphere electron transfer contributions, in which a change of distances or geometry in the solvation or coordination shells of the two chemical species is taken into account (the Fe-O distances in Fe(H2O)2+ and Fe(H2O)3+ are different).

Gas phase ion chemistry is a field of science encompassed within both chemistry and physics. It is the science that studies ions and molecules in the gas phase, most often enabled by some form of mass spectrometry. By far the most important applications for this science is in studying the thermodynamics and kinetics of reactions. For example, one application is in studying the thermodynamics of the solvation of ions. Ions with small solvation spheres of 1, 2, 3... solvent molecules can be studied in the gas phase and then extrapolated to bulk solution.

The Curtin–Hammett principle is a principle in chemical kinetics proposed by David Yarrow Curtin and Louis Plack Hammett. It states that, for a reaction that has a pair of reactive intermediates or reactants that interconvert rapidly, each going irreversibly to a different product, the product ratio will depend both on the difference in energy between the two conformers and the energy barriers from each of the rapidly equilibrating isomers to their respective products. Stated another way, the product distribution reflects the difference in energy between the two rate-limiting transition states. As a result, the product distribution will not necessarily reflect the equilibrium distribution of the two intermediates. The Curtin–Hammett principle has been invoked to explain selectivity in a variety of stereo- and regioselective reactions. The relationship between the (apparent) rate constants and equilibrium constant is known as the Winstein-Holness equation.

In chemical kinetics, the entropy of activation of a reaction is one of the two parameters that are typically obtained from the temperature dependence of a reaction rate constant, when these data are analyzed using the Eyring equation of the transition state theory. The standard entropy of activation is symbolized ΔS and equals the change in entropy when the reactants change from their initial state to the activated complex or transition state.

<span class="mw-page-title-main">Hapticity</span> Number of contiguous atoms in a ligand that bond to the central atom in a coordination complex

In coordination chemistry, hapticity is the coordination of a ligand to a metal center via an uninterrupted and contiguous series of atoms. The hapticity of a ligand is described with the Greek letter η ('eta'). For example, η2 describes a ligand that coordinates through 2 contiguous atoms. In general the η-notation only applies when multiple atoms are coordinated. In addition, if the ligand coordinates through multiple atoms that are not contiguous then this is considered denticity, and the κ-notation is used once again. When naming complexes care should be taken not to confuse η with μ ('mu'), which relates to bridging ligands.

<span class="mw-page-title-main">Transition state theory</span> Theory describing the reaction rates of elementary chemical reactions

In chemistry, transition state theory (TST) explains the reaction rates of elementary chemical reactions. The theory assumes a special type of chemical equilibrium (quasi-equilibrium) between reactants and activated transition state complexes.

<span class="mw-page-title-main">Energy profile (chemistry)</span> Representation of a chemical process as a single energetic pathway

In theoretical chemistry, an energy profile is a theoretical representation of a chemical reaction or process as a single energetic pathway as the reactants are transformed into products. This pathway runs along the reaction coordinate, which is a parametric curve that follows the pathway of the reaction and indicates its progress; thus, energy profiles are also called reaction coordinate diagrams. They are derived from the corresponding potential energy surface (PES), which is used in computational chemistry to model chemical reactions by relating the energy of a molecule(s) to its structure.

References

  1. IUPAC , Compendium of Chemical Terminology , 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006) " Activated complex ". doi : 10.1351/goldbook.A00092
  2. Peter Atkins and Julio de Paula, Physical Chemistry (8th ed., W.H. Freeman 2006), p.809 ISBN   0-7167-8759-8
  3. Tuñón, Iñaki; Williams, Ian H. (2019), "The transition state and cognate concepts", Advances in Physical Organic Chemistry, vol. 53, Elsevier, pp. 29–68, doi:10.1016/bs.apoc.2019.09.001, ISBN   978-0-08-102900-8
  4. IUPAC , Compendium of Chemical Terminology , 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006) " Transition State Theory ". doi : 10.1351/goldbook.T06470
  5. IUPAC , Compendium of Chemical Terminology , 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006) " Transition State ". doi : 10.1351/goldbook.T06468
  6. 1 2 Chemical Kinetics and Reaction Dynamics. Dordrecht: Springer Netherlands. 2006. doi:10.1007/978-1-4020-4547-9. ISBN   978-1-4020-4546-2.
  7. Eyring, Henry (1935). "The Activated Complex in Chemical Reactions". The Journal of Chemical Physics. 3 (2): 107–115. doi:10.1063/1.1749604. ISSN   0021-9606.
  8. 1 2 Eyring, Henry. (1935). "The Activated Complex and the Absolute Rate of Chemical Reactions". Chemical Reviews. 17 (1): 65–77. doi:10.1021/cr60056a006. ISSN   0009-2665.
  9. Pechukas, P (1981). "Transition State Theory". Annual Review of Physical Chemistry . 32 (1): 159–177. doi:10.1146/annurev.pc.32.100181.001111. ISSN   0066-426X.
  10. 1 2 Murrell, J. N.; Laidler, K. J. (1968). "Symmetries of activated complexes". Transactions of the Faraday Society. 64 (0): 371–377. doi:10.1039/TF9686400371. ISSN   0014-7672.