Akaflieg Braunschweig SB-12

Last updated
SB-12
RoleExperimental Standard Class sailplane
National origin Germany
Manufacturer Akaflieg Braunschweig
First flight9 April 1980
Number built1

The Akaflieg Braunschweig SB-12 is a single seat, Standard Class sailplane designed around 1980 by German technical university students to test out a new wing profile from the German Aerospace Centre. It was not intended for production, but the sole SB-12 remains active in 2010.

Contents

Design and development

The Akaflieg Braunschweig or Akademische Fliegergruppe Braunschweig (English: The Brunswick Academic Flying Group) is one of some fourteen German student flying groups attached to and supported by their home Technical University. Several have designed and built aircraft, often technically advanced and leading the development of gliders in particular. [1]

The Brunswick students began the design of the Standard Class SB-12 in mid-1979 and the first flight was made on 9 April 1980. It was not intended for production but to test out a new wing aerodynamic profile designed by the German Aerospace Centre (DFVLR) for high cruising performance. The wing of the SB-12 has single, I-section spars, with carbon fibre flanges and GRP webs. The skins are carbon fibre and polymeric foam. The wings are mounted at mid-fuselage at an incidence of 0.5° and with 3° of dihedral. They carry GRP ailerons and wide span airbrakes but no spoiler or flaps. [2]

The fuselage is a GRP monocoque with a front hinged canopy over the single seat cockpit and a tank for 150 kg (331 lb) of water ballast. The SB-12 has a T-tail, with tailplane and elevators set on top of a straight edged, only slightly tapered fin and rudder. The fixed surfaces are formed from GRP and plastic foam sandwich, the moving surfaces using only GRP. Its undercarriage has a retractable, unsprung monowheel, fitted with an internal drum brake, with a fixed, partly recessed tailwheel. [2]

Operational history

The sole SB-12, registration D-1225 and wearing HQ, for its airfoil, on the tail [2] remained with Akaflieg Braunschweig until they sold it in 1989. [3] About ten years later it was sold to an owner in the German Alps and in 2007 sold again and returned to Brunswick. [3] It remained on the German register in 2010. [4]

Specifications

Data from Jane's All the World's Aircraft 1981/2 [2] All performance figures estimated

General characteristics

Performance

Related Research Articles

Rolladen-Schneider LS1 Single seat German glider, 1968

The Rolladen-Schneider LS1 is a Standard Class single-seat glider manufactured in Germany by Rolladen-Schneider from 1968 to 1977.

Akaflieg München Mü27 German prototype research glider, 1979

The Mü-27 is a research glider aircraft that designed and built in Germany in 1979. Only one example was constructed.

Akaflieg Berlin B12 German two-seat glider, 1977

The Akaflieg Berlin B12 is a high performance two-place glider aircraft that was designed and built in Germany. Conceived as a research vehicle, only one unit was constructed.

Akaflieg Berlin B13

The Akaflieg Berlin B13 is a two-seat motor-glider designed and built in Germany.

Akaflieg Braunschweig SB-5 Danzig German single-seat glider, 1959

The Akaflieg Braunschweig SB-5 is a German single-seat Standard Class sailplane designed and prototyped by students of Brunswick University. More than 100 were built to their design, in several different variants.

The Akaflieg Braunschweig SB-10 Schirokko is a German two-seat high performance sailplane designed and built by students of Brunswick University. The sailplane was not intended for production.

The Akaflieg Darmstadt D-34 sailplanes were a series of experimental single seat sailplanes, designed at the University of Darmstadt in the 1950s and early 1960s to explore the structural and aerodynamic advantages of the then emerging plastics and composite materials.

The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.

The Akaflieg Braunschweig SB-11 is an experimental, single seat, variable geometry sailplane designed by aeronautical students in Germany. It won the 15 m span class at the World Gliding Championships of 1978 but its advances over the best, more conventional, opposition were not sufficient to lead to widespread imitation.

The Akaflieg Darmstadt D-39 was a single-seat motor glider derived from the D-38 sailplane. Built in Germany in the late 1970s, it was not intended for production and only one was constructed.

Akaflieg Stuttgart fs31 Training sailplane designed and built by the Akaflieg Stuttgart in the 1980s.

The Akaflieg Stuttgart fs31 Ferdinand Porsche is a tandem seat, dual control training glider designed and built in Germany between 1977 and 1981. The aircraft was intended to have high performance, yet to be robust enough for student use. It was not intended for production and remains in service with the Akaflieg after almost 40 years and 7,100 flying hours.

The FVA-20 F. B. Schmetz was a single seat, Standard Class sailplane, built as a one-off aircraft, to explore the application of glass fibre to glider construction. Built over a long period, it finally flew in late 1979.

The experimental Hirth Hi-25 Kria was only the second glider constructed from glass reinforced plastic (GRP). Built in Germany in 1958, it was a single seat, 12 m (39.4 ft) span aircraft. Only one was built; it later flew for several years with Akaflieg Stuttgart.

The Akaflieg Braunschweig SB-7 Nimbus is a Standard class glider designed and built in Germany in the 1960s. It was one of a series of mixed glass fibre and wood designs from the students of Akaflieg Braunschweig.

The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.

Akaflieg Braunschweig SB-13 Arcus German single-seat glider, 1988

The Akaflieg Braunschweig SB-13 Arcus was an experimental tailless, single seat, Standard Class glider designed and built in Germany in the early 1990s. Though it performed as well as its conventional contemporaries, it did not offer sufficiently improved performance to compensate for its difficult handling characteristics.

ISF Mistral-C German single-seat glider, 1976

The Mistral-C was one of the first gliders, designed in 1974 to the then new Club Class rules. It was based on the Strauber Mistral, a Standard Class glider flown a year earlier, but with a new wing and built from newer composite materials. Both types were designed and constructed in Germany. More than 75 Mistral-Cs were produced.

The Akaflieg Braunschweig SB-6 Nixope was an early (1961) GRP high performance single seat glider designed and built in Germany by aeronautical students from Brunswick University. It competed in the 1961 German National gliding competition, coming sixth, and led directly to two further GRP aircraft.

The Bertoni Altinger AB-1 Superalbatros,, is a high-performance sailplane designed and built in Argentina in the 1950s and 1960s.

Akaflieg Braunschweig SB-14 German single-seat glider, 2003

The Akaflieg Braunschweig SB 14 is an 18 m (59 ft) Open-class sailplane designed and built in Germany in the early 2000s.

References

  1. ↑ Simons, Martin (2005). Sailplanes 1965-2000 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp.  41. ISBN   3-9808838-1-7.
  2. 1 2 3 4 Taylor, John W. R. (1981). Jane's All the World's Aircraft 1981-1982. London: Jane's Information Group. pp. 575, 598–9. ISBN   0-7106-0705-9.
  3. 1 2 "Die SB 12" . Retrieved 20 February 2012.
  4. ↑ Partington, Dave (2010). European registers handbook 2010. Air Britain (Historians) Ltd. p. 115. ISBN   978-0-85130-425-0.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.