Akaflieg Braunschweig SB-6 Nixope

Last updated
SB-6 Nixope
RoleExperimental competition glider
National origin German Federal Republic
Manufacturer Akaflieg Braunschweig
DesignerBjörn Stender and O. Heise
First flight2 February 1961
Number built1
Developed into Glasflügel BS-1
Akaflieg Braunschweig SB-7 Nimbus

The Akaflieg Braunschweig SB-6 Nixope (English: Water Sprite) was an early (1961) GRP high performance single seat glider designed and built in Germany by aeronautical students from Brunswick University. It competed in the 1961 German National gliding competition, coming sixth, and led directly to two further GRP aircraft.

Contents

Design and development

The 1961 SB-6 Nixope was one of the earliest gliders with a glass-fibre structure following two other German designs, the 1957 Akaflieg Stuttgart FS-24 Phönix and the 1958 Hirth Hi 25 Kria. Like the Phönix, the Nixope was designed and built within a university aeronautical engineering department but the NIxope team was a traditional undergraduate one, headed by Björn Stender then in his final year. At a time when GRP techniques were novel and evolving, the Nixobe was very ambitious, with a wing of aspect ratio 25, compared with 17.8 for the Phönix and 14.3 for the Kria. Stender had visited Nabern to learn about GRP construction, though the Braunschweig group developed some techniques of their own. [1]

The Nixope was mostly constructed from GRP and balsa. Its cantilever shoulder wing was built around a broad GRP and balsa box spar, with closely spaced (80 mm (3 in)) balsa and GRP ribs. Balsa skinning was followed by a GRP outer layer, without the use of female moulds. The wings were straight tapered, with greater taper on the outer sections. At the tips the leading edges were rounded off. Its simple wooden ailerons were quite short, filling only about 25% of the span. To keep the wing structure simple there were no flaps or airbrakes. [1] [2] The wing was mounted with 1.5° of dihedral. [3]

The fuselage was built in a similar way, with 10 mm (0.39 in) thick planking. It had a very smoothly streamlined and small cross-section shape, tapering to the tail. The pilot was in a fully reclining seat, allowing a long, detachable, single piece, blown plexiglass canopy which did not interrupt the fuselage profile. A retractable, fully enclosed monowheel, with a brake, was fitted. The empennage was conventional and simply wooden, with an all moving tailplane mounted on a broad, tall, straight edged fin just above the fuselage. The rudder, straight edged, forward swept and hinged well clear of the elevator, extended down to the keel where there was a small tail bumper. The elevator but not the rudder was balanced. As the Nixope had no wing mounted airbrakes, a 1.3 m (4 ft 3 in) diameter ribbon parachute was mounted in the tail. [1] [2] [3]

Operational history

The Nixope first flew on 2 February 1961. It proved to have good performance and later that year Stender flew it into sixth position in the German National Championships, even though it was not easy to fly and despite his lack of competitive experience. After Stender had graduated he received funding and facilities from Heli Lausch, an affluent South African pilot, to build a new aircraft closely based on the Nixope and known as the BS-1 from Stender's initials. After his death in 1963 in the first prototype and the non-fatal loss of the second, the BS-1 underwent major structural redesign, becoming the successful Glasflügel BS-1. [1] The next Akaflieg Braunschweig glider, the SB-7 Nimbus, was also strongly influenced by the Nixope. [4]

The Nixope was lost in August 1964. [4]

Specifications

Data from Shenstone and Wilkinson (1963) pp.108-9 [3]

General characteristics

Performance

Related Research Articles

Schleicher ASW 12 German glider, 1965

The ASW 12, initially known as the AS 12, is a single-seat Sailplane of glass composite construction. The wing is shoulder mounted and it has a T-tail. It is essentially a developed production version of the Akaflieg Darmstadt D-36.

Akaflieg Stuttgart fs24 German single-seat glider, 1957

The Akaflieg Stuttgart fs24, nicknamed Phönix, was a glider designed and built in West Germany from 1951.

Glasflügel BS-1 West German open class sailplane, 1962

The Glasflügel BS-1, sometimes called the Björn Stender BS-1 or the Stender BS-1, is a West German, high-wing, single seat, T-tailed, FAI Open Class glider that was designed by Björn Stender and produced by Glasflügel.

Bölkow Phoebus German single-seat glider, 1964

The Bölkow Phoebus is a glass fibre composite competition sailplane, designed and produced in Germany in the 1960s. Large numbers were built, achieving success at some national contests, and many remain active.

Slingsby Skylark 4 British competition glider, 1961

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

Johnson RHJ-6 Adastra

The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.

Akaflieg Braunschweig SB-5 Danzig German single-seat glider, 1959

The Akaflieg Braunschweig SB-5 is a German single-seat Standard Class sailplane designed and prototyped by students of Brunswick University. More than 100 were built to their design, in several different variants.

The Akaflieg Darmstadt D-34 sailplanes were a series of experimental single seat sailplanes, designed at the University of Darmstadt in the 1950s and early 1960s to explore the structural and aerodynamic advantages of the then emerging plastics and composite materials.

Akaflieg Darmstadt D-36 Circe German single-seat glider, 1964

The Akaflieg Darmstadt D-36 Circe is a single seat, high performance sailplane designed and built in Germany in the mid-1960s, one of the early "glass ships". It was the winner at the German National Championships in 1964 and came second in the World Championships the following year.

The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.

The Akaflieg Braunschweig SB-12 is a single seat, Standard Class sailplane designed around 1980 by German technical university students to test out a new wing profile from the German Aerospace Centre. It was not intended for production, but the sole SB-12 remains active in 2010.

Akaflieg Stuttgart fs31 Training sailplane designed and built by the Akaflieg Stuttgart in the 1980s.

The Akaflieg Stuttgart fs31 Ferdinand Porsche is a tandem seat, dual control training glider designed and built in Germany between 1977 and 1981. The aircraft was intended to have high performance, yet to be robust enough for student use. It was not intended for production and remains in service with the Akaflieg after almost 40 years and 7,100 flying hours.

The experimental Hirth Hi-25 Kria was only the second glider constructed from glass reinforced plastic (GRP). Built in Germany in 1958, it was a single seat, 12 m (39.4 ft) span aircraft. Only one was built; it later flew for several years with Akaflieg Stuttgart.

Ciani Uribel

The Ciani EC 59/39 Uribel is a single seat sailplane designed and built in Italy in the late 1950s. It was one of the first to use a new type of laminar flow airfoil, optimised for both high and low speed flight. One example finished fourth in the 1963 World Gliding Championships.

The Akaflieg Braunschweig SB-7 Nimbus is a Standard class glider designed and built in Germany in the 1960s. It was one of a series of mixed glass fibre and wood designs from the students of Akaflieg Braunschweig.

The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.

Akaflieg Braunschweig SB-13 Arcus German single-seat glider, 1988

The Akaflieg Braunschweig SB-13 Arcus was an experimental tailless, single seat, Standard Class glider designed and built in Germany in the early 1990s. Though it performed as well as its conventional contemporaries, it did not offer sufficiently improved performance to compensate for its difficult handling characteristics.

The Kirigamine Mita is a training glider, seating two in tandem, designed in Japan in the early 1960s. A modified version, first flown in 1966, was produced in modest numbers.

The CVT1 Zigilo was a single-seat, 12-metre-span (39 ft) Italian training glider designed and built in Italy in the 1950s. Only one was completed.

Akaflieg Braunschweig SB-14 German single-seat glider, 2003

The Akaflieg Braunschweig SB 14 is an 18 m (59 ft) Open-class sailplane designed and built in Germany in the early 2000s.

References

  1. 1 2 3 4 5 Simons, Martin (2006). Sailplanes 1945-1965 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp. 254–9. ISBN   3 9807977 4 0.
  2. 1 2 Taylor, John W R (1964). Jane's All the World's Aircraft 1964-65. London: Sampson Low, Marston & Co. Ltd. pp. 359–360.
  3. 1 2 3 Shenstone, B.S.; Wilkinson, K.G. (1963). The World's Sailplanes. II. Organisation Scientifique et Technique Internationale du Vol à Voile (OSTIV) and Schweizer Aero-Revue. pp. 108–9.
  4. 1 2 Hardy, Michael (1982). Gliders & Sailplanes of the World. London: Ian Allan Ltd. p. 5. ISBN   0 7110 1152 4.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.