Audi RC8 2.0 TFSI

Last updated
Audi RC8 2.0 TFSI
Overview
Manufacturer Audi Sport GmbH
Production2019-present
Layout
Configuration Inline-4
Displacement 2.0  L (122  cu in)
Cylinder bore 86–90  mm (3.39–3.54  in)
Piston stroke Free but typically approximately between 86–90  mm (3.39–3.54  in)
Block materialDie cast steel or aluminium alloy. Machining process from a solid is not permitted
Head materialDie cast steel or aluminium alloy
Valvetrain DOHC 16-valve (four-valves per cylinder)
Compression ratio 15:1
Combustion
Turbocharger Single-turbocharged by Garrett Advancing Motion. 3.5  bar (51  psi) turbo boost
Fuel systemBosch central high-pressure gasoline direct fuel injection. One direct injector per cylinder fed by an engine-driven high-pressure fuel pump
Management Bosch Motronic 7.4
Fuel type Aral Ultimate 102 RON unleaded racing gasoline
Oil system Dry sump. Castrol EDGE SUPERCAR and Total Quartz
Cooling system Single mechanical water pump feeding a single-sided cooling system
Output
Power output 610 + 30  hp (455 + 22  kW) (2019) later 610 + 60  hp (455 + 45  kW) (2020-present) [1] including push-to-pass
Torque output Approx. 650  N⋅m (479  ft⋅lbf) @ 9,000 rpm
Dimensions
Length600  mm (23.62  in)
Width697  mm (27.44  in)
Height693  mm (27.28  in)
Dry weight187  lb (85  kg) including turbocharger
Chronology
PredecessorAudi DTM V8
Audi RS5 DTM Turbo Jonathan Aberdein 2019 DTM Hockenheim (May) FP1.jpg
Audi RS5 DTM Turbo

The Audi RC8 2.0 TFSI is a mass-produced four-stroke 2.0-litre single-turbocharged inline-4 gasoline racing engine, developed and produced by Audi Sport GmbH for Deutsche Tourenwagen Masters. The RC8 2.0 TFSI engine is commonly based on Audi 2.0 R4 16v TSI/TFSI (EA888) road car engine. Audi RC8 TFSI was shakedowned on 15 November 2018 and later made public unveil on 20 March 2019 after more engine dyno test. [2] Audi RC8 TFSI is the first-ever turbocharged DTM engine to date, replacing the aging Audi DTM V8 engine after nineteen-years of service which conform the "Class One" regulations that shared with Japanese Super GT.

Contents

The RC8 2.0 TFSI engine also featuring push-to-pass system which produces 30  hp (22  kW ) for more overtaking manoeuvre improvement. [3]

Development

History

In December 2014, Audi DTM Project Leader Andreas Roos and his fellow engineers at Audi Sport take the first step towards the new Audi RS 5 DTM, which marks Audi’s biggest and most important touring car project in recent history. [4] Shortly before the project’s launch, the course has been set in terms of crucial elements of a joint future of the DTM and the Japanese Super GT racing series according to the Class 1 regulations. The first preparation of Audi RC8 2.0 TFSI inline-4 turbo engine was commenced in January 2015. The initial and key element of the mission: a new two-litre four-cylinder internal combustion engine with an exhaust gas turbocharger for racing, starting in the 2017 DTM season that was envisaged at that time.

Since 2008, Ulrich Baretzky, Head of Engine Technology at Audi Sport for more than 30 years, and his team have been pursuing the project of a successor to the four-litre V8 power-plant that has been used in the DTM since 2000. After the DTM decided to introduce new turbo engines at the beginning of the 2019 season, Audi, in January 2017, launches the final development stage for the future racing version of its RS 5 Coupé, which the brand with the four rings has relied on in the DTM since 2013. Internally the project is named ‘RC8’. Initially, the main focus at Audi Sport continues to be on the engine. “For the total vehicle, we started initial concept studies in the middle of 2017,” relates Andreas Roos.

Progress of engine development and dyno testing

Two litres of displacement, four cylinders, a compact in-line configuration, petrol direct injection analogous to the TFSI concept from the production vehicles, turbocharging using an exhaust gas turbocharger: at Audi, this is the technical foundation of its new high-tech engine for the DTM. More engine output combined with reduced engine weight and lower specific fuel consumption intended to make international touring car racing more attractive, whilst strengthening the reference to production vehicles with high-efficiency two-litre turbo engines worldwide: this puts the racing and business philosophy in a nutshell.

In January 2017, the testing of the so-called full engine of the new design, which had begun in March 2015, continues on Audi Sport’s dynos. Before the full engine, research was done on a one-cylinder version of the new DTM four-cylinder unit. The tests with the one-cylinder engine were focused on the combustion process.

In the Spring of 2017, Audi Sport tests its new DTM four-cylinder turbo unit on the dyno, including the cooling system. To the extent possible, everything is configured exactly the way it will subsequently be positioned under the bonnet of the Audi RS 5 DTM. This means: the engine including the water and oil circuit, the exhaust system together with the turbocharger plus the intercooler system and the wastegate. The complete package of the new DTM racing engine consists of some 2,000 single parts.

The final rig testing stage for the new engine starts in the summer of 2017: the interaction between the turbo four-cylinder unit and the proven sequential six-speed gearbox is brought into perfect harmony. Audi Sport uses an axle test rig for this purpose on which the entire propulsion system is ‘driven’ with absolute realism and made ready for racing.

Following a total of about two years of development work, the forward-thinking result is obtained: Audi’s new two-litre four-cylinder turbo engine for the DTM with its more than 610 horsepower (450 kW) delivers some 100 horsepower more than the four-litre V8 did with twice as many cylinders and twice the cubic capacity, and with 650 Nm it develops nearly 25 per cent more torque. The new design only weighs 85 kilogrammes, about half as much as its predecessor.

Plus, Audi has taken another significant step forward: “The DTM engine has extremely low specific consumption, which is now in ranges that used to be typical of diesel units. In terms of weight and lightweight design – especially under the aspect of avoiding CO2 emissions – we’re pointing out a few approaches that in future will hopefully also find their way into road cars – as in the case of the first TFSI for Le Mans and TDI,” emphasises chief engine developer Ulrich Baretzky.

Test car assembly

In September 2018, all of the modifications required for the turbo engine and adjustments to the Class 1 regulations have been implemented in detail. The first 2019-gen Audi RS 5 DTM starts being assembled. The key differences between it and the 2018-spec car: the entire front end has been modified to suit the more compact four-cylinder turbo power-plant and its higher cooling requirements. Particularly conspicuous are the additional air intakes at the front for the intercooler, which make the Audi RS 5 DTM appear even more aggressive than its predecessor.

The car’s aerodynamics design has also been completely updated by the autumn of 2018. According to the Class 1 regulations, the underfloor, the front and rear diffusors and the rear wing, whose width has increased by an impressive 52 centimetres, have been redefined for the 2019-spec DTM Audi. These modified components are also specification parts, just like the monocoque, safety cage, catalytic converter, powertrain, gearbox, brakes, suspensions, rims, wheels and fuel tank. In that way, the DTM consistently continues to pursue its path towards further cost reduction and increased competitiveness.

“Accommodating the heavily modified cooling system in the engine bay posed a challenge in particular. Because of this, we allowed for about one more week than usual to assemble the first car,” says Roos. The project leader explains more precisely: “For example, due to the higher exhaust gas temperatures, we had to pay special attention to proper thermal shielding at every exposed area around the exhaust system.” In early October 2018, after five weeks of assembly work, Audi Sport is able to start its new turbo engine for the first time in the modified Audi RS 5 DTM. The audience for what is now the most powerful DTM Audi of all time is exclusively located at the motorsport headquarters in Neuburg an der Donau: the employees of Audi Sport.

Applications

Related Research Articles

Touring car racing is a motorsport road racing competition with heavily modified road-going cars. It is popular in Argentina, Australia, New Zealand, Brazil, Britain, Germany, Sweden and Norway. It has both similarities to and significant differences from stock car racing which is popular in the United States.

Audi A6 car model by Audi

The Audi A6 is an executive car made by the German automaker Audi. Now in its fifth generation, the successor to the Audi 100 is manufactured in Neckarsulm, Germany, and is available in saloon and estate configurations, the latter marketed by Audi as the Avant. Audi's internal numbering treats the A6 as a continuation of the Audi 100 lineage, with the initial A6 designated as a member of the C4-series, followed by the C5, C6, C7 and the C8. The related Audi A7 is essentially a sportback (fastback) version of the C7-series and C8-series A6, but is marketed under its own separate identity and model designation.

Audi TT car model

The Audi TT is a 2-door sports car marketed by Volkswagen Group subsidiary Audi since 1998, and now in its third generation. The first two generations were assembled by the Audi subsidiary Audi Hungaria Motor Kft. in Győr, Hungary, using bodyshells manufactured and painted at Audi's Ingolstadt plant and parts made entirely by the Hungarian factory for the third generation.

Audi A3 car model

The Audi A3 is a small family or subcompact executive car manufactured and marketed since the 1990s by the Audi subdivision of the Volkswagen Group, currently in its fourth generation.

Audi A5 car model

The Audi A5 is a series of compact executive coupe cars produced by the German automobile manufacturer Audi since March 2007. The A5 range additionally comprises the coupe, cabriolet, and "Sportback" version of the Audi A4 saloon and estate models.

Audi A4 car model

The Audi A4 is a line of compact executive cars produced since 1994 by the German car manufacturer Audi, a subsidiary of the Volkswagen Group.

The Deutsche Tourenwagen Masters is a touring car series sanctioned by DMSB and ITR who have been affiliated to the FIA since 1976 and 2003, respectively. The series is based in Germany, with rounds elsewhere in Europe, racing a silhouette racing car based on a mass-produced road car.

Audi Quattro Car model

The Audi Quattro is a road and rally car, produced by the German automobile manufacturer Audi, part of the Volkswagen Group. It was first shown at the 1980 Geneva Motor Show on 3 March. Production continued through 1991.

Audi S4 car model

The Audi S4 is the high performance variant of Audi's compact executive car A4. The original Audi S4, built from 1991 until 1994, was a performance-oriented version of Audi's 100 saloon/sedan. All subsequent S4s since 1997 have been based on the Audi A4; and as the A4 has evolved from one generation to the next, so has the S4.

Audi RS 6 car model

The Audi RS 6 is a high-performance variant of the Audi A6 range, produced by the high-performance subsidiary company Audi Sport GmbH, for Audi AG, a division of the Volkswagen Group.

Audi S and RS models range of high performance versions of certain car models by Audi

Audi S and RS models are a range of high performance versions of certain car models of the German automotive company AUDI AG. These cars primarily focus on enhanced "sport" performance. Production of Audi "S" cars began in 1990 with the S2 Coupé, whilst the first "RS" car appeared four years later with the Audi RS 2 Avant.

Audi Sport GmbH, formerly known as quattro GmbH, is a high-performance subsidiary of Audi, a subsidiary of the Volkswagen Group.

In the automotive industry, engine downsizing is the practice of utilizing smaller combustion engines over larger ones of the same power capacity when manufacturing vehicles. It is the result of car manufacturers attempting to provide more efficient vehicles that emit fewer emissions, often mandated by legislative standards. The term generally relates to traditional internal combustion engines powered by petrol or diesel.

Turbochargers have been used on various petrol engines since 1962, in order to obtain greater power or torque output for a given engine displacement.

Audi 5 Series DTM (naturally-aspirated) touring car by Audi

The Audi 5 Series DTM is a touring car constructed by the German car manufacturer Audi AG for use in the Deutsche Tourenwagen Masters. It was developed in 2011 and has been raced in DTM seasons 2012-2018 before being replaced by updated turbo version of Audi RS5 Turbo DTM from 2019 season onwards. It was designed by former Audi Head of Research and Development Wolfgang Dürheimer. The A5 DTM replaced the retired Audi A4 DTM at the end of the 2011 season and based on the production Audi A5.

Audi Q8 full-size luxury crossover SUV coupé

The Audi Q8 is a mid-size luxury crossover SUV coupé made by Audi that was launched in 2018. It is the flagship of the Audi SUV line, and is being produced at the Volkswagen Bratislava Plant.

2019 Deutsche Tourenwagen Masters 2019 edition of Deutsche Tourenwagen Masters

The 2019 Deutsche Tourenwagen Masters was the thirty-third season of premier German touring car championship, first season under "Class One" regulations era and also twentieth season under the moniker of Deutsche Tourenwagen Masters since the series' resumption in 2000. Mercedes-AMG withdrew from the championship after the 2018 season to focus on their Formula E entry. British sports car manufacturer Aston Martin replaced Mercedes-Benz, which marked the first non-German entry in 23 years when Italian car manufacturer Alfa Romeo last entered the series under the International Touring Car Series name in 1996. Defending champion Gary Paffett did not return to defend his title, as he moved to Formula E.

Audi RS5 Turbo DTM car model

The Audi RS5 Turbo DTM is a "Class One" touring car constructed by the German car manufacturer Audi AG for use in the Deutsche Tourenwagen Masters. The car is an updated version of the previous Audi RS5 DTM that had a naturally aspirated engine. The Audi RS5 Turbo DTM will still remain based on the production Audi RS5. The car made its DTM début in the 2019 season under "Class One" regulations and will be used until 2021 season. The RS5 Turbo is the Audi's first-turbo powered DTM car ever to date and first overall DTM turbo-powered machine since Ford Sierra Cosworth RS500 Turbo DTM in 1989.

The BMW P48 Turbo is a mass-produced four-stroke 2.0-litre single-turbocharged inline-4 racing engine, developed and produced by BMW Motorsport for Deutsche Tourenwagen Masters. The P48 Turbo engine is commonly based on BMW B48 road car engine. BMW P48 Turbo is the first-ever turbocharged DTM engine to date, replacing the aging BMW P66 Series (P66/1) V8 engine after seven-years of service and conform the "Class One" regulations that shared with Japanese Super GT. BMW P48 Turbo engine currently competes with engine competitors Audi RC8 2.0 TFSI and HWA AFR Turbo 2.0.

References

  1. ↑ Haidinger, Sven (26 December 2019). "DTM-Hersteller einig: Push-to-pass 2020 doppelt so stark, mehr Freiheit bei DRS". motorsport-total.com (in German). Motorsport Total GmbH. Retrieved 26 December 2019.
  2. ↑ "Progress through Turbo". Audi Sport GmbH . 20 March 2019. Retrieved 20 March 2019.
  3. ↑ Parry, Tommy (2019-03-28). "2019 Audi DTM Engine: Lightweight, 640-HP Turbo Four-Cylinder". Turnology. Retrieved 2020-04-29.
  4. ↑ billcho (2019-08-02). "Advantage in the DTM: With TFSI Power at the Top". Audi Club North America. Retrieved 2020-04-29.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.