BMW M78

Last updated
BMW M78
BMW M78 engine in BMW-Museum in Munich, Bayern.JPG
Overview
Production1933–1950
Layout
Configuration Straight-six engine
Displacement 1.2 L (1,182 cc)
1.5 L (1,490 cc)
1.9 L (1,911 cc)
2.0 L (1,971 cc)
Cylinder bore 56 mm (2.20 in)
58 mm (2.28 in)
65 mm (2.56 in)
66 mm (2.60 in)
Piston stroke 80 mm (3.15 in)
94 mm (3.70 in)
96 mm (3.78 in)
Cylinder block materialIron
Cylinder head materialreverse-flow, iron
Valvetrain OHV
Valvetrain drive system chain
Combustion
Operating principle spark ignition (Otto)
Fuel system2 × horizontal draught carburettor
Fuel type Petrol
Chronology
PredecessorNone
Successor BMW M337
BMW 303 (1933-1934) MHV BMW 303 1934 01.jpg
BMW 303 (1933-1934)

The BMW M78 is a petrol overhead valve straight-six engine which was produced from 1933 to 1950. [1] It is the first straight-6 automobile engine produced by BMW, an engine layout which has been a key feature of the brand for many years since. [2]

Contents

The M78 was launched in the 1933 BMW 303. [3] In 1936, the higher performance BMW M328 straight-six engine began to be produced alongside the M78. In 1952, the BMW M337 engine was introduced as the replacement to the M78. Compared with the M78, the M337 has a revised cylinder head, a new inlet manifold and a reinforced crankshaft with bigger, more modern bearings. [4] : 88  [5]

Design

The M78 was designed by Rudolf Schleicher [3] : 25  [6] as a medium power straight-6 engine. [7] Initial versions of the M78 had the same bore and stroke as the BMW 3/20's four-cylinder engine. [8] The M78 has two main cast pieces, the iron cylinder block, and the reverse-flow cylinder head, also made from iron. The oilpan, and the cylinder head cover are made from pressed steel. In addition to that, the M78 has a pressed-steel cover for the chain that drives the in-block camshaft. Both the crankshaft, and the camshaft have four bearings. The camshaft also drives the shaft for the oil pump and the ignition distributor. The engine has overhead valves that are actuated through pushrods and rocker arms. The water pump is flange-mounted to the cylinder head, and powered by a belt that is driven by a pulley that is flanged to the crankshaft. The belt also powers the alternator. The spark plugs are installed almost horizontally, below the intake manifold. BMW installed two horizontal draught Solex 26 mm carburettors next to the engine block and flange-mounted them to the intake manifold that sits atop them, i.e. the carburettors "hang down" from the intake manifold. [7]

Models

ModelDisplacementPowerYear
303 version 1,182 cc (72.1 cu in)22 kW (30 PS)1933-1934
315 version 1,490 cc (90.9 cu in)25 kW (34 PS)1934-1937
315/1 version 29 kW (40 PS)
319 version 1,911 cc (116.6 cu in)33 kW (45 PS)1935-1937
319/1 version 40 kW (55 PS)
326 version 1,971 cc (120.3 cu in)37 kW (50 PS)1936-1950
320 version 33 kW (45 PS)1937-1938
327 version 40 kW (55 PS)1937-1953
[9]

303 version

This first version of the M78 had a bore of 56 mm (2.20 in), a stroke of 80 mm (3.15 in) and a compression ratio of 5.6:1. [4] : 33–36  It produces 22 kW (30 PS) and 68 N⋅m (50 lb⋅ft). [10] [1]

Applications:

315 version

A development of the 303 version, where the bore was increased from 56 to 58 mm (2.20 to 2.28 in) and the stroke was increased from 80 to 94 mm (3.15 to 3.70 in). [4] : 33–36, 39–40  The compression ratio remained at 5.6:1. [4] : 39–40  [11] This engine produces 25 kW (34 PS) at 4000 rpm. [11]

Applications:

315/1 version

An upgraded version of the 315 engine with the compression ratio increased to 6.8:1 [4] : 39–40  [12] and using three Solex carburetors. [4] : 39–40  [12] This version produces 29 kW (40 PS) at 4000 rpm. [12]

Applications

319 version

The 315 engine was enlarged to 1,911 cc (116.6 cu in) for the 319. [13] This was a result of increasing the bore to 65 mm (2.56 in) and the stroke to 96 mm (3.78 in). This engine produces 33 kW (45 PS) at 3750 rpm. [4] : 44 

Applications:

319/1 version

The 315/1 engine was enlarged to 1.9 L (1,911 cc) for the 319/1. [13] This was a result of increasing the bore to 65 mm (2.56 in) and the stroke to 96 mm (3.78 in). This engine produces 40 kW (55 PS) at 4000 rpm. [4] : 44 

Applications:

326 version

The 319 engine was enlarged to 2.0 L (1,971 cc) for the 326 by increasing the bore by one millimetre to 66 mm (2.6 in). Twin 26 mm (1.0 in) Solex carburetors were used. The compression ratio was raised to 6.0:1. [4] : 46  This engine produces 37 kW (50 PS) at 3750 rpm. [4] : 46  [14]

Applications:

320 version

The 326 engine was detuned (by using a single carburetor) for the 320 and 321. This engine produces 33 kW (45 PS) at 3750 rpm. [15]

Applications:

327 version

The 327 used a version of the 326 engine with a new cylinder head, yielding a 6.3:1 compression ratio and a slight power increase to 40 kW (55 PS) at 4500 rpm. [4] : 68  The engine retains its 66 by 96 mm bore and stroke, resulting in a displacement of 1,971 cm3 (120.3 in3). The engine has a BMEP of 6.7 kp/cm2 (0.66 MPa; 95.30 lbf/in2) at 3750/min, equivalent to a max torque of 104 N⋅m (10.6 kp⋅m; 76.7 lb⋅ft) at 3750/min. [7]

Applications:

See also

Related Research Articles

<span class="mw-page-title-main">BMW M30</span> Reciprocating internal combustion engine

The BMW M30 is a SOHC straight-six petrol engine which was produced from 1968 to 1995. With a production run of 27 years, it is BMW's longest produced engine and was used in many car models.

<span class="mw-page-title-main">Jaguar AJ-V8 engine</span> Reciprocating internal combustion engine

The Jaguar AJ-8 is a compact DOHC V8 piston engine used in many Jaguar vehicles. It was the fourth new engine type in the history of the company. It was an in house design with work beginning before Ford's purchase of the company. In 1997 it replaced both designs previously available on Jaguar cars: the straight-6 Jaguar AJ6 engine, and the Jaguar V12 engine. It remained the only engine type available on Jaguar until 1999 with the launch of the S-Type, when the Jaguar AJ-V6 engine was added to the list. The AJ-V8 is available in displacements ranging from 3.2L to 5.0L, and a supercharged version is also produced. Ford Motor Company also used this engine in other cars, including the Lincoln LS and the 2002–2005 Ford Thunderbird, as well as in several Land Rovers, and the Aston Martin V8 Vantage.

<span class="mw-page-title-main">BMW M10</span> Reciprocating internal combustion engine

The BMW M10 is a SOHC inline-4 petrol engine which was produced by BMW from 1962-1988. It was the company's first four-cylinder engine since the BMW 309 ended production in 1936 and was introduced in the New Class sedans.

<span class="mw-page-title-main">BMW M20</span> Reciprocating internal combustion engine

The BMW M20 is a SOHC straight-six petrol engine which was produced from 1977 to 1993. It was introduced eight years after the larger BMW M30 straight-six engine, which remained in production alongside the M20.

<span class="mw-page-title-main">BMW M50</span> Reciprocating internal combustion engine

The BMW M50 is a straight-6 DOHC petrol engine which was produced from 1990 to 1996. It was released in the E34 520i and 525i, to replace the M20 engine.

<span class="mw-page-title-main">BMW M52</span> Reciprocating internal combustion engine

The BMW M52 is a straight-6 DOHC petrol engine which was produced from 1994 to 2000. It was released in the E36 320i, to replace the M50. The BMW S52 engine is a high performance variant of the M52 which powered the American and Canadian market E36 M3 from 1996 to 1999.

<span class="mw-page-title-main">BMW M62</span> Reciprocating internal combustion engine

BMW M62 is a naturally aspirated V8 petrol engine which was produced from 1995 to 2005. A successor to the BMW M60, the M62 features an aluminium engine block and a single row timing chain.

<span class="mw-page-title-main">BMW S38</span> Reciprocating internal combustion engine

The BMW S38 is a straight-6 DOHC petrol engine which replaced the M88 and was produced from 1984-1995. The S38 was originally produced for North America as an equivalent to the M88 with slightly lower power output. In 1989, power output of the S38 was increased and it became the worldwide replacement for the M88.

<span class="mw-page-title-main">BMW M54</span> Reciprocating internal combustion engine

The BMW M54 is a naturally aspirated straight-6 DOHC petrol engine produced from 2000 to 2006. It was released in the E53 X5 and is the replacement for the M52 engine. The S54 is the equivalent high performance engine, used in the E46 M3, the Z3 M Coupé/Roadster and the E85/E86 Z4 M. The BMW M56 SULEV engine is based on the M54.

<span class="mw-page-title-main">BMW N62</span> Reciprocating internal combustion engine

The BMW N62 is a naturally aspirated V8 petrol engine which was used in BMW cars from 2001–2010. It also remained in small-scale production for the Morgan Aero until 2019. The N62 is the world's first engine to use a continuously variable-length intake manifold, and BMW's first V8 to feature variable valve lift.

<span class="mw-page-title-main">Toyota M engine</span> Reciprocating internal combustion engine

Toyota Motor Corporation's M family of engines were a longitudinally mounted straight-6 engine design. They were used from the 1960s through the 1990s. All M family engines were OHC designs. While the M family was born with a chain-driven single camshaft it evolved into a belt-driven DOHC system after 1980. All M family engines used a cast-iron block with an aluminum cylinder head, and were built at the Toyota Kamigo plant in Toyota City, Japan.

The Honda B20A engine series, known as the B20A and B21A, was an inline four-cylinder engine family from Honda introduced in 1985 in the second-generation Honda Prelude. Also available in the contemporary third-generation Honda Accord in the Japanese domestic market, along with the Accord-derived Vigor, the B20A was Honda's second line of multivalve DOHC inline four-cylinder engines behind the "ZC" twin-cam variant of the ordinarily SOHC D-series, focused towards performance and displacing 2.0 to 2.1 litres.

The Hyundai Alpha series is a multi-valve gasoline inline four-cylinder engine family comprising 1.3, 1.4, 1.5, and 1.6L naturally aspirated versions and a 1.5L turbocharged version. Introduced in 1992, this was Hyundai's first engine designed entirely in-house and was the first indigenous South Korean engine design. Design objectives were to provide high performance and good fuel economy with excellent durability at a reasonable cost.

<span class="mw-page-title-main">Toyota GR engine</span> Reciprocating internal combustion engine

The Toyota GR engine family is a gasoline, open-deck, piston V6 engine series. The GR series has a 60° die-cast aluminium block and aluminium DOHC cylinder heads. This engine series also features 4 valves per cylinder, forged steel connecting rods and crankshaft, one-piece cast camshafts, a timing chain, and a cast aluminium lower intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S.

<span class="mw-page-title-main">Volvo Modular engine</span> Reciprocating internal combustion engine

The Volvo Modular Engine is a family of straight-four, straight-five, and straight-six automobile piston engines that was produced by Volvo Cars in Skövde, Sweden from 1990 until 2016. All engines feature an aluminum engine block and aluminum cylinder head, forged steel connecting rods, aluminum pistons and double overhead camshafts.

<span class="mw-page-title-main">BMW 303</span> Motor vehicle

The BMW 303 was a small family saloon produced by BMW in 1933 and 1934. It was the first BMW motor car with a six-cylinder engine and the first BMW motor car with the "kidney grille" associated with the brand. The platform developed for the 303 was used for several other BMW cars, including the BMW 309, a four-cylinder version of the 303, the BMW 315, a 1.5-litre version of the 303 which replaced it in 1934 and was built until 1937, the BMW 319, a 1.9-litre version of the 303 produced alongside the 315 from 1935 to 1937, and the BMW 329, a development of the 319 with styling based on the newer, larger BMW 326, that briefly replaced the 319 in 1937.

<span class="mw-page-title-main">BMW OHV V8 engine</span> Reciprocating internal combustion engine

The BMW OHV V8 is an overhead valve V8 petrol engine produced from 1954 to 1965. It is BMW's first V8 engine, and BMW did not produce another V8 automobile engine until the BMW M60 in 1992.

<span class="mw-page-title-main">BMW M328</span> Reciprocating internal combustion engine

The BMW M328 is an overhead valve straight-six petrol internal combustion engine which was produced from 1936 to 1940. It was a high-performance development of the BMW M78 engine that was produced alongside the M78.

<span class="mw-page-title-main">BMW M337</span> Reciprocating internal combustion engine

The BMW M337 is a straight-6 OHV petrol engine installed at a slanted angle which was produced in three variants from 1952-1958. Built to power BMW's first new car after World War II, the M337 engine was a replacement for the BMW M78.

References

  1. 1 2 "1933 BMW 303 Saloon technical specifications". Carfolio.com. Retrieved 2012-06-03.
  2. ↑ Murphy, Tom (19 November 2007). "Inline-6 Helped Forge BMW Brand". www.wardsauto.com. Retrieved 3 June 2012.
  3. 1 2 Noakes, Andrew (2008). The Ultimate History of BMW. Parragon Books. ISBN   978-1-4075-3512-8.
  4. 1 2 3 4 5 6 7 8 9 10 11 Norbye, Jan P. (1984). BMW - Bavaria's Driving Machines . Skokie, IL: Publications International. ISBN   0-517-42464-9.
  5. ↑ Oswald, Werner (1980). Alle BMW-Automobile 1928–1978 (in German). Stuttgart: Motorbuch Verlag. ISBN   3-87943-584-7.
  6. ↑ Zeichner, Walter. "Vor 70 Jahren - BMW 303, der erste Sechszylinderwagen". BMW Mobile Tradition Live (in German). July 2003: 8–11. Retrieved 20 August 2017.
  7. 1 2 3 Kremser, Hans (1942), Hans List (ed.), Der Aufbau schnellaufender Verbrennungskraftmaschinen für Kraftfahrzeuge und Triebwagen, Die Verbrennungskraftmaschine (in German), vol. 11, Wien: Springer, p. 208, ISBN   978-3-7091-9755-4
  8. ↑ Oswald, Werner [in German] (1979), Deutsche Autos 1920-1945 – Alle deutschen Personenwagen der damaligen Zeit (in German) (3rd ed.), Stuttgart: Motorbuch-Verlag, pp. 53, 60, ISBN   978-3-87943-519-7
  9. ↑ Oswald, Werner [in German] (1979), Deutsche Autos 1920-1945 – Alle deutschen Personenwagen der damaligen Zeit (in German) (3rd ed.), Stuttgart: Motorbuch-Verlag, pp. 60…63, ISBN   978-3-87943-519-7
  10. ↑ "BMW M78 Automobilmotor 1,2 Liter". www.bmw-grouparchiv.de (in German). Retrieved 20 August 2017.
  11. 1 2 "1934 BMW 315 Saloon technical specifications". www.carfolio.com. Retrieved 3 June 2012.
  12. 1 2 3 "1934 BMW 315/1 Sport technical specifications". www.carfolio.com. Retrieved 3 June 2012.
  13. 1 2 "1935 BMW 319 Saloon technical specifications". www.carfolio.com. Retrieved 3 June 2012.
  14. ↑ "326 Cabrio and Limousine". www.usautoparts.net. Archived from the original on 12 February 2008.
  15. ↑ "1937 BMW 320 Saloon technical specifications". www.carfolio.com. Retrieved 3 June 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.