Ballast tractor

Last updated

Hayes WHDX 70-170 6x6 tractor Hayes Arbegui 2010.JPG
Hayes WHDX 70-170 6×6 tractor

A ballast tractor is a specially weighted tractor unit of a heavy hauler combination. It is designed to utilize a drawbar to pull or push heavy or exceptionally large trailer loads which are loaded in a hydraulic modular trailer. When feasible, lowboy-style semi-trailers are used to minimize the height of a load's center of mass. Typical drivetrains are 6×4 and 6×6, but 8×6 and 8×8 are also available. Typical ballast tractor loads include oil rig modules, bridge sections, buildings, ship sections, and industrial machinery such as generators and turbines.

Contents

Only a handful of manufacturers produce dedicated ballast tractors. Extra-heavy-duty chassis versions of mass-production tractor units are fitted with drawbar hitches and a separate ballast box as an alternative. These units are classified as N3 Category of large goods vehicle. Ballast tractors can be traced back to the 1940s when heavy haulers from the UK started employing purpose-built Scammell Showtracs, a short wheelbase 4×2 ballast tractor. [1] [2]

Increasingly, remote-controlled, self-propelled modular transporters (SPMT) are being employed in traditional ballast tractor/trailer roles.

Etymology

MAN ballast tractor hooked via drawbar to 92,000 kg (203,000 lb) transformer on Nicolas modular axles Rawcliffe Ballast Tractor & Trannsformer.jpg
MAN ballast tractor hooked via drawbar to 92,000 kg (203,000 lb) transformer on Nicolas modular axles

The ballast tractor's name derives from the nautical term “sailing ballast” describing heavy material added to a vessel to improve stability. For a ballast tractor, ballast is added over the driving wheels to maximize traction. The additional weight increases the friction between the tyres and the road surface, allowing the tractor to overcome the inertia and friction of moving a heavy trailed load. Without it, there would be unproductive wheelspin.[ citation needed ]

Description

With a semi-trailer, ballast is added in the form of the weight of the attached trailer pressing down upon the tractor's fifth wheel. Since the load is separate from a ballast tractor, it provides no ballast: the drawbar only transmits a horizontal force.[ citation needed ]

High inertia is encountered when starting to move a heavy load. To overcome this, ballast tractors tend to have high-powered, low geared engines that provide substantial torque, especially at low speeds. Additionally, ballast tractors are often fitted with heavy-duty hub reduction axles, a combination resulting in exceptionally low maximum speeds.[ citation needed ]

A strong chassis is required to both support the extra ballast weight and pulling forces transmitted by the drawbar. A reinforced chassis also allows multiple tractors to be coupled together to maximize power and traction. Heavy-duty versions of commercial tractor units may be fitted with a ballast box and suitable draw gear, or a ballast tractor may be purpose-built. Ballast is placed above the driving axle, or spread out over multiple driving axles to maximize traction on each and evenly distribute its load. Conversion from a regular tractor to a ballast tractor may require some modifications like chassis alteration, extra axle, larger tires, ballast box, and a heavy-duty gearbox so that it can handle the extra weight. [3] The heavy-duty tractors which are usually converted into ballast tractors have 6x4, 8x6 axle configuration, hub reduction, better suspension and a powerful engine ranging from 300 to 1000hp.[ citation needed ]

A purpose built ballast tractor tends to be the heaviest class of on-road trucks. In some cases, its kerb weight can be greater than their axle configuration's legal Gross Vehicle Weight (GVW) permits, requiring special permission to use public roads. Some nations have categorized these tractors in a different category than conventional tractors because of higher GVW permits and HMT configuration.[ citation needed ]

Typical ballast tractor configurations employ an independent drawbar trailer, hydraulic modular trailer, or dolly trailer. An advantage of using ballast tractors is the ability to push-steer a trailer around a corner. A girder trailer, for example, is double-articulated, so the front tractor can pull the load around a corner while the rear tractor pushes it through, thereby making the load more manoeuvrable than a simple towing configuration. Use of a following tractor also can increase control and brake force descending an incline.[ citation needed ]

Equipment

Titan Spezialfahrzeugbau GmbH ballast tractors with Mercedes-Benz Actros cabs Titan-Schwerlastturm.jpg
Titan Spezialfahrzeugbau GmbH ballast tractors with Mercedes-Benz Actros cabs

Ballast box

The ballast box is a metal box installed on the rear chassis of the tractor instead of the fifth wheel coupling. Earlier heavy haulers unmounted the fifth wheel and used merely a piece or two of heavy rocks, stones or concrete blocks which weighted enough to avoid wheel spin, [4] later builders and heavy haulers developed metal boxes of different designs to match the tractor layout. These boxes were filled with concrete or steel to increase the weight of the tractor. The problem with ballast tractors was the weight of ballast itself weighted over 10, 20 or even 40 tons in some scenarios. Other designs also included sleeping cabins in the ballast for the drivers and the crew for longer journeys and harsh weather conditions, [5] This made the height of the tractors increase significantly, these units are still used today in the gulf area due to extreme heat. Some units have factory fitted ballast box with appropriate weight to meet with the regional guidelines, these tractors units do not have fifth wheel and drive out from the factory with a ballast box. Heavy haul operators convert heavy-duty tractors to ballast tractors with an aftermarket ballast box built by a builder or by themselves.[ citation needed ]

New age power boosters which are external engine an accessory of hydraulic modular trailer can also be mounted on the tractor chassis to act as a ballast, saving a lot of space on the trailer itself for the loads and most important avoid application of extra tractors. Mammoet and Scheuerle (Member of the TII Group) have proved this configuration in 2019 on a difficult terrain in Norway. [6] Almost all HMT manufacturers have their own variant of power booster.[ citation needed ]

Drawbar coupling

Drawbar coupling is a special tow hitch mounted on the front end or rear end of the tractor, sometimes both, it connects the HMT to the ballast tractor. Earlier coupling consisted of in house made metal hitch which had loops to lock drawbar eyes with a pin. Later fifth wheel manufacturers like Jost Rockinger and Ringfeder developed heavy-duty drawbar couplings with a 50 mm loop, drawbars and drawbar eyes which were built with higher quality and standards this increase the safety significantly. These couplings can be mounted on both ends of the tractor for push or pull applications. Some manufacturers also provide tractors with drawbar coupling fitted from the factory. [7]

Manufacturers

Only a handful of manufacturers produce dedicated ballast tractors. Most high-volume manufacturers offer heavy-duty chassis versions of certain tractor units, which enable a ballast box to be fitted. In Europe, manufacturers tend to send some of their products to another company (owned by the parent) to be converted into a special heavy-duty version.[ citation needed ]

Belarus
Belgium
Canada
Czech Republic
France
Germany
India
Italy
Netherlands
Russia (formerly Soviet Union)
Spain
Switzerland
UK
USA

Operators

Three ballast tractors from JB Rawcliffe & Sons (two MAN pulling and one Mercedes pushing) with 100,000 kg (220,000 lb) transformer on Nicolas modular-5 Greiner bed 5-axle trailer en route to a wind farm substation Rawcliffe Ballasted Outfit.JPG
Three ballast tractors from JB Rawcliffe & Sons (two MAN pulling and one Mercedes pushing) with 100,000 kg (220,000 lb) transformer on Nicolas modular-5 Greiner bed 5-axle trailer en route to a wind farm substation

Most heavy haulage and heavy lift engineering firms employ heavy duty tractor-unit models that can accommodate a ballast box. Countries where modernization is taking place, such as regions of the Middle East and South Africa and Asia, operate larger number of ballast tractors due to the greater frequency of heavy loads (such as power station components) and infrastructure projects.

Apart from being used by fairgrounds as a direct replacement for the steam-powered showman's engine, specialist moving and haulage companies use ballast tractors. These include:

See also

Related Research Articles

<span class="mw-page-title-main">Semi-trailer truck</span> Combination of a tractor unit and one or more semi-trailers to carry freight

A semi-trailer truck is the combination of a tractor unit and one or more semi-trailers to carry freight. A semi-trailer attaches to the tractor with a type of hitch called a fifth wheel.

<span class="mw-page-title-main">Road train</span> Type of trucking vehicle

A road train, also known as a land train or long combination vehicle (LCV) is a semi-truck used to move road freight more efficiently than single-trailer semi-trucks. It consists of one semi-trailer or more connected together with or without a tractor. It typically has to be at least three trailers and one tractor. Road trains are often used in areas where other forms of heavy transport are not feasible or practical.

<span class="mw-page-title-main">Trailer (vehicle)</span> Towed cargo vehicle

A trailer is an unpowered vehicle towed by a powered vehicle. It is commonly used for the transport of goods and materials.

<span class="mw-page-title-main">Dump truck</span> Truck which can tip its bed, dumping its contents

A dump truck, known also as a dumping truck, dump trailer, dumper trailer, dump lorry or dumper lorry or a dumper for short, is used for transporting materials for construction as well as coal. A typical dump truck is equipped with an open-box bed, which is hinged at the rear and equipped with hydraulic rams to lift the front, allowing the material in the bed to be deposited ("dumped") on the ground behind the truck at the site of delivery. In the UK, Australia, South Africa and India the term applies to off-road construction plants only and the road vehicle is known as a tip lorry, tipper lorry, tipper truck, tip truck, tip trailer or tipper trailer or simply a tipper.

Scammell Lorries Limited was a British manufacturer of trucks, particularly specialist and military off-road vehicles, between 1921 and 1988. From 1955 Scammell was part of Leyland Motors.

<span class="mw-page-title-main">Tow hitch</span> Hard attachment point on a road vehicle, used to tow a trailer

A tow hitch is a device attached to the chassis of a vehicle for towing, or a towbar to an aircraft nose gear. It can take the form of a tow ball to allow swiveling and articulation of a trailer, or a tow pin, or a tow hook with a trailer loop, often used for large or agricultural vehicles where slack in the pivot pin allows similar movements. Another category is the towing pintle used on military vehicles worldwide.

<span class="mw-page-title-main">Tractor unit</span> A truck designed to tow semi-trailers

A tractor unit, also known as a truck unit, lorry unit, power unit, prime mover, ten-wheeler, semi-tractor, semi-truck, semi-lorry, tractor cab, truck cab, lorry cab, big rig tractor, big rig truck or big rig lorry or simply a tractor, truck, lorry, semi, big rig or rig, is a characteristically heavy-duty towing engine that provides motive power for hauling a towed or trailered load. These fall into two categories: heavy- and medium-duty military and commercial rear-wheel-drive semi-tractors used for hauling semi-trailers, and very heavy-duty typically off-road-capable, often 6×6, military and commercial tractor units, including ballast tractors.

<span class="mw-page-title-main">Semi-trailer</span> Trailer vehicle without a front axle

A semi-trailer is a trailer without a front axle. The combination of a semi-trailer and a tractor truck is called a semi-trailer truck.

<span class="mw-page-title-main">Towing</span> Pulling an object

Towing is coupling two or more objects together so that they may be pulled by a designated power source or sources. The towing source may be a motorized land vehicle, vessel, animal, or human, and the load being anything that can be pulled. These may be joined by a chain, rope, bar, hitch, three-point, fifth wheel, coupling, drawbar, integrated platform, or other means of keeping the objects together while in motion.

<span class="mw-page-title-main">Ringfeder</span>

Ringfeder name is a German brand based in Krefeld founded in 1922. The brand manufactures bolt couplings, hook couplings, drawbar eyes, underrun protections and accessories. Ringfeder is part of VBG Truck Equipment, one of the divisions in the VBG Group, a large international industrial group.

<span class="mw-page-title-main">Articulated hauler</span>

An articulated hauler, articulated dump truck (ADT), or sometimes a dump hauler, is a very large heavy-duty type of dump truck used to transport loads over rough terrain, and occasionally on public roads. The vehicle usually has all-wheel drive and consists of two basic units: the front section, generally called the tractor, and the rear section that contains the dump body, called the hauler or trailer section. Steering is made by pivoting the front in relation to the back by hydraulic rams. This way, all wheels follow the same path, making it an excellent off-road vehicle.

<span class="mw-page-title-main">Self-propelled modular transporter</span> Vehicle for carrying very large objects

A self-propelled modular transporter or sometimes self-propelled modular trailer (SPMT) is a platform heavy hauler with a large array of wheels which is an upgraded version of a hydraulic modular trailer. SPMTs are used for transporting massive objects, such as large bridge sections, oil refining equipment, cranes, motors, spacecraft and other objects that are too big or heavy for trucks. Ballast tractors can however provide traction and braking for the SPMTs on inclines and descents.

<span class="mw-page-title-main">Drawbar (haulage)</span> Vehicle and trailer coupling

A drawbar is a solid coupling between a hauling vehicle and its hauled load. Drawbars are in common use with rail transport; road trailers, both large and small, industrial and recreational; and agricultural equipment.

<span class="mw-page-title-main">Tank transporter</span> Combination of a heavy tractor unit and mating semi-trailer used for transporting tanks

A tank transporter is a combination of a heavy tractor unit or a ballast tractor and a mating full trailer, hydraulic modular trailer or semi-trailer, used for transporting tanks and other armoured fighting vehicles. Some also function as tank recovery vehicles, the tractors of which may be armoured for protection in combat conditions.

<span class="mw-page-title-main">Willème</span> French truck manufacturer

Willème was a French truck manufacturer, specializing in heavy- and special-duty trucks.

<span class="mw-page-title-main">Scammell Mechanical Horse</span> Type of tractor unit

The concept of the Mechanical Horse tractor unit with an easily detached articulated trailer was conceived in the early 1930s by Napier & Son. It has one front wheel in the midline. The London and North Eastern Railway had approached Napier for an answer to the problem of replacing horses for local haulage purposes, while retaining the flexibility of changing the wagons and the maneuverability of the horse and wagon. These vehicles are often known as "Snub-nose Trucks" or "Snub-nose Lorries" because of the round hood in front of the cab.

<span class="mw-page-title-main">MOL Trucks</span>

MOL is a manufacturer of specialist trucks and trailers, based in Hooglede, Belgium. Specializes in manufacturing of trailers, waste vehicles, port equipement, trucks and rail equipments.

<span class="mw-page-title-main">Nicolas Industrie</span> French manufacturer of heavy trucks, trailers, and SPMTs

Nicolas Industrie S.A.S. is a French manufacturer of heavy trucks, trailers, HMT and SPMTs, mostly intended for oversize loads. Nicolas has been located in Champs-sur-Yonne since 1969, which is also when they started to develop vehicles meant particularly for very heavy loads. Their trucks, sold under the Tractomas brand, are built to single order. They most often incorporate Renault cabs and other parts, as well as a number of proprietary parts from manufacturers around the world. The Nicolas Tractomas TR1010 D100 currently holds the record as the world's largest road going truck, weighing in at 71 tonnes.

<span class="mw-page-title-main">Hydraulic modular trailer</span>

A hydraulic modular trailer (HMT) is a special platform trailer unit which feature swing axles, hydraulic suspension, independently steerable axles, two or more axle rows, compatible to join two or more units longitudinally and laterally and uses power pack unit (PPU) to steer and adjust height. These trailer units are used to transport oversized load, which are difficult to disassemble and are overweight. These trailers are manufactured using high tensile steel, which makes it possible to bear the weight of the load with the help of one or more ballast tractors which push and pull these units via drawbar or gooseneck this combination of tractor and trailer is also termed as heavy hauler.

<span class="mw-page-title-main">Nicolas Tractomas</span> Motor vehicle

Nicolas Tractomas is a heavy-duty built-to-order ballast tractor specifically to tow hydraulic modular trailers and road trains used for movement of oversize loads manufactured by French manufacturer Nicolas Industrie based in Auxerre. The tractor was bespoke build with preferred engine, gearbox, drivetrain and ballast with a Renault kerax cabin. The production of the tractor began in 1979 and lasted till 2016. The TR1010 D100 model of the tractor was awarded the Guinness World Record in 2015 for the largest road truck in the world, weighing 71 tons.

References

  1. "Roll up, roll up... | 7th June 2012 | The Commercial Motor Archive". archive.commercialmotor.com. Retrieved 14 June 2023.
  2. "No. 3 | Vehicles". Carters Steam Fair. Retrieved 14 June 2023.
  3. "Extra heavy-duty trucks featuring Allison transmissions expand Megatranz fleet". ATI_InternetBlank. Retrieved 24 March 2022.
  4. "Tractors Modified for Dual Purpose | 16th April 1948 | The Commercial Motor Archive". archive.commercialmotor.com. Retrieved 14 June 2023.
  5. "The importance of ballast!". Heritage Machines. 2 September 2021. Retrieved 25 March 2022.
  6. "Mammoet uses new road solution to navigate dangerous route". Project Cargo Journal. 9 October 2019. Retrieved 25 March 2022.
  7. "Heavy metal in special transport". www.transportengineer.org.uk. Retrieved 25 March 2022.
  8. Trucks, Volvo. "Volvo Trucks India launches next-generation trucks". www.prnewswire.com (Press release). Retrieved 24 March 2022.
  9. "Scania R 580 6×4 truck receives on-road Puller certification from ARAI – Motorindia" . Retrieved 24 March 2022.
  10. 1 2 "Thimbleby & Shorland - commercial vehicles spares and accessories memorabilia, models, literature pictures and prints auction Saturday 25th March 2006" (PDF). 25 March 2006. p. 16. Archived (PDF) from the original on 26 September 2007. Retrieved 2007-09-14. This very smart tri axle [Scammell Junior Constructor] ballast tractor was one of six supplied new to Pickfords in 1958.
  11. "Heavy Haulage Move in Thornton". Railpage. Retrieved 24 March 2022.
  12. "DAF N 3300 NT 3326 DKX «Sarens» ballast tractor with crane, cab Magirus Deutz — Каталог К.В.Х." (in Russian). Retrieved 24 March 2022.