Beckhole Incline | |
---|---|
Overview | |
Other name(s) | Goathland Incline |
Status | Closed |
Locale | Goathland, North Yorkshire, England |
Coordinates | 54°24′18″N0°43′41″W / 54.405°N 0.728°W |
Termini | |
Service | |
Operator(s) | W&PR, 1836–1845 Y&NMR, 1845–1854 NER, 1854–1865 |
History | |
Opened | 26 May 1836 |
Closed | 1 June 1865 |
Technical | |
Track length | 1,500 yards (1,400 m) |
Number of tracks | 1 (with passing place) |
Track gauge | 4 ft 8+1⁄2 in (1,435 mm) standard gauge [1] |
Highest elevation | 350 ft (110 m) |
Beckhole Incline was a steep, rope-worked gradient on the railway line between Whitby and Pickering, in the North Riding of Yorkshire, England. Opened in May 1836 as part of the horse-worked Whitby & Pickering Railway, the line was operated by three railway companies before becoming redundant on the opening of a diversionary line to the east that allowed through working by steam engines on the entire line. Although the incline was closed to regular traffic in 1865, it was used for a very brief period in 1872, to test a special locomotive intended for railways with steep gradients.
The site of the incline can now be walked, as part of the Rail Trail between Goathland and Grosmont.
Opened as part of the Whitby and Pickering Railway (W&PR) in May 1836, [2] the incline allowed for trains to be hauled up and down from Beckhole to Goathland Bank Top station. At Beckhole, the height above sea level was 200 feet (61 m), [3] and at Goathland Bank Top, it was 350 feet (110 m). [4] The incline (or inclined plane), was engineered by Frederick Swanwick to a design by George Stephenson. [5]
The incline was 1,500 yards (1,400 m) long, and whilst it was rated at 1-in-12, it did reach 1-in-10 at one point. [6] The first version of the incline workings involved a hemp rope attached to the wagons or carriages, and the 5.75-inch (146 mm) rope was wound around a drum 10 feet (3 m) in diameter. [7] A tank with wheels fitted was filled with water at the top, and was then attached to one end of the rope which ran on a series of pulley wheels (174 in total). [8] As some parts of the incline were curved, the wheels were angled and wooden rollers were added at these points to lessen friction and provide some 'give' in the rope. [9] The tank was allowed to descend hauling the railway vehicles up the bank by its "gravitational force". [10] [11] The journey to the top took about 4½ minutes, (a speed of around 11 miles per hour (18 km/h)) through "an avenue of trees". [12] [8] [13] At the bottom of the incline, the water tank was emptied into the beck, and it was returned to the top of the incline to be filled with water. [14] A local farmer was employed to carry out this function, returning the tank by horse-power. If he was required to move the tank, a white flag was displayed at Beck Hole. [15] A reservoir for supplying water for the tanks was located in Gale Field next to Goathland Bank Top. When the incline was closed, the water supply was retained for filling the water tower on Goathland station. [16]
In the days of horse operation, apart from the opening ceremony when three carriages ascended at the same time, carriages were generally taken up the incline one at a time. [17] On the return journey of the opening ceremony (26 May 1836), the carriages descending the incline were held near the bottom and the rope was removed. Then the brakes were released, which allowed the gravity to move the carriages to "..within 6 miles (9.7 km) of Whitby..". [18] The company charged a flat rate for the transportation of goods along the Whitby and Pickering Railway, however, goods ascending the incline were subject to an extra Shilling per ton (1836 prices), which goods descending were not. [19] Services were spartan in the early days with the timetable from 1844, showing just two workings in either direction. [20] This continued right up until the conversion to full steam operation, the timetable for March 1847, still showing two trains in either direction. [21]
The incline was listed in the Guinness Railway Book as one of the best known work-roped inclines, which were designed to carry passengers. Most inclines at that time, were used in quarrying or mining operations. [22] Charles Dickens travelled along the incline in 1861, later writing to Wilkie Collins and describing it as a "..quaint old railway..", [23] [24] and its operation he described as you "did it like a Blondin". [25] [26]
The Whitby & Pickering Line was bought out in 1845 by the York and North Midland Railway (Y&NM), [27] who set about adapting the entire Whitby & Pickering Line from single track to double track, (with a southern connection at Pickering to York) which it achieved in 1847. [28] The Y&NM also implemented the conversion of the line to steam-engine operation in the same year, and the method of working the incline changed from water balancing, into a stationary steam-worked engine, with the capability of 10 brake horsepower (7.5 kW). [29] The previous water-loading system was viewed as unreliable in the face of heavier traffic and more frequent services, [30] with the Y&NM also considering the water tank method and communications between the railway and the farmer as "primitive". [15] The stationary engine was located at the bank top in Goathland, and had a wire rope that was wound around a drum 6 feet (1.8 m) in diameter. The wire rope was attached to a specially-built six-wheeled van, which would be at the head of the train whilst descending, and at the rear of the train (pushing) when ascending. [31] By 1854, the operation of the line had been subsumed into the North Eastern Railway (NER). [32]
Initially, locomotives to be used on the line were rebuilt steam engines with different springs and wheel arrangements than in normal engines. This was in case the engines needed to visit York Works for maintenance; the route south over the incline being the only option until 1865, when the North Eastern Railway's branch from Battersby reached Grosmont station, and the deviation line opened. [33]
In November 1860, the North Eastern Railway submitted plans to Parliament to build a deviation railway from Grosmont to Goathland Summit. This would be a conventionally run railway with a gradient (southwards) of 1-in-49, [34] and as such, the railway incline would be closed. [35] The incline added 20 minutes to each journey, over what was a relative short distance, [36] and after a series of accidents on the incline (see below section), the local and regional press stated and pushed the NER for the deviation line to be built. [37] On 1 June 1865, the Deviation Line from Grosmont to Goathland Mill station was opened, and whilst the incline was closed, it was left in situ for some time afterwards in case it was needed. [38] The NER issued instructions in July 1868 to remove the track and winding engine, leaving the incline derelict. [39]
Seven years after closure, the incline was used to test an engine built by the Manning Wardle Company in Leeds, who were exporting three bespoke steam locomotives to Brazil. [40] The engine was designed to haul a load of 40 tonnes (44 tons) up a gradient of 1-in-12. [41] The engines were larger than the loading gauge of the railways in Yorkshire, and so bits had to be removed as it travelled across the Scarborough Viaduct in York, and other trains had to be diverted as it was an out-of-gauge working. [42] It left Leeds on the morning of 2 May 1872, and went via Harrogate, York and then stayed overnight in Malton. It arrived at the bottom of the incline just before noon of the Friday having reversed at Grosmont, [43] the section through Goathland having been closed and removed. The line on the incline had been relaid, and it had been adapted to be 1-in-11, 1-in-12, 1-in-13, and 1-in-14, with at least one S-curve placed on the incline. [42] The gauge had been laid at 3 feet 8 inches (1.12 m), with a central rail raised up 9 inches (230 mm) above the main rail level. [44] The locomotive was intended to be used on the Cantagalo Railway, transporting coffee to the ports, which was formerly carried on mules. [45] [46] Testing took place over two days and was deemed to be a success, and the locomotive was taken away from the incline for exporting. [39] The raised central rail was laid sideways and this became John Barraclough Fell's patented Fell mountain railway system, used in several places worldwide, and still extant at the Snaefell Mountain Railway on the Isle of Man. [47]
The course of the entire section of railway from Goathland Bank Top to Grosmont is now popular walking path known as the Rail Trail. [48] [49] [50]
It was necessary to build several structures to effectively operate the incline. In the days of the horse-drawn operation, no written evidence exists of passengers using Beckhole as a station, although trains/carriages had to pause to detach the horse(s). [20] By the time of steam locomotive operations, Beckhole had two workers cottages, and behind these was an engine shed with water tank. The railway fanned out into a section of five lines, one going to the shed and another having a turntable. [51] The two cottages were later turned into one structure (Incline Cottage), which still stands and is now a private grade II listed structure. [52]
At Goathland Bank Top, a building which is now grade II listed and referred to as The Old Ticket Office, still stands and is thought to be the building next to where water was pumped into the tank for the counterbalance operation. [53] As engines were also needed at the top of the incline to carry on the journey, a shed was installed here also. Again, a single line structure with an adjacent turntable. [51]
The most common names of the incline were Beckhole Incline, and Goathland Incline, [54] however, Beck Holes Incline, and Beck Hole Incline were also sometimes seen. The incline was also referred to as either Whitby Incline, [37] despite being over 8 miles (13 km) south of Whitby itself, or Gothland Incline. [55]
The North Yorkshire Moors Railway (NYMR) is a heritage railway in North Yorkshire, England, that runs through the North York Moors National Park. First opened in 1836 as the Whitby and Pickering Railway, the railway was planned in 1831 by George Stephenson as a means of opening up trade routes inland from the then important seaport of Whitby. The line between Grosmont and Rillington was closed in 1965 and the section between Grosmont and Pickering was reopened in 1973 by the North York Moors Historical Railway Trust Ltd. The preserved line is now a tourist attraction and has been awarded several industry accolades.
The Esk Valley Line is a railway line located in the north of England, covering a total distance of approximately 35 miles (56 km), running from Middlesbrough to Whitby. The line follows the course of the River Esk for much of its eastern half.
Goathland is a village and civil parish in the Scarborough district of North Yorkshire, England. Historically part of the North Riding of Yorkshire, it is in the North York Moors national park due north of Pickering, off the A169 to Whitby. It has a station on the steam-operated North Yorkshire Moors Railway line.
Grosmont is a railway station on the Esk Valley Line, which runs between Middlesbrough and Whitby via Nunthorpe. The station, situated 6 miles 24 chains (10.1 km) west of Whitby, serves the village of Grosmont, in the Borough of Scarborough, North Yorkshire, England. It is owned by Network Rail and managed by Northern Trains. The station is also served by heritage services operated by the North Yorkshire Moors Railway.
Whitby is a railway station serving the town of Whitby in North Yorkshire, England. It is the southern terminus of the Esk Valley Line from Middlesbrough. The station is owned by Network Rail; its mainline services are operated by Northern Trains and its heritage services by the North Yorkshire Moors Railway.
Pickering railway station is the southern terminus of the North Yorkshire Moors Railway and serves the town of Pickering in North Yorkshire, England. The first railway arrived in Pickering from the north in 1836, however, it wasn't until the railway was connected from the south in 1845, that the current station was built. The station was closed by British Railways in March 1965, but since 1975, the station has served as the southern terminus of the North York Moors Railway.
Levisham railway station is a station on the North Yorkshire Moors Railway and serves the village of Levisham in the North York Moors National Park, North Yorkshire, England.
Goathland railway station is a station on the North Yorkshire Moors Railway and serves the village of Goathland in the North York Moors National Park, North Yorkshire, England. It has also been used in numerous television and film productions. Holiday accommodation is available in the form of a camping coach.
The York and North Midland Railway (Y&NMR) was an English railway company that opened in 1839 connecting York with the Leeds and Selby Railway, and in 1840 extended this line to meet the North Midland Railway at Normanton near Leeds. Its first chairman was the railway financier George Hudson, who had been called the railway king.
Beck Hole is a small valley village in the former Borough of Scarborough, North Yorkshire, England. The village lies within the Goathland civil parish and the North York Moors national park.
The Whitby and Pickering Railway (W&P) was built to halt the gradual decline of the port of Whitby on the east coast of England. Its basic industries—whaling and shipbuilding—had been in decline and it was believed that opening transport links inland would help regenerate the town and port.
Beckhole railway station was a railway station at Beck Hole in the North Yorkshire Moors on part of the original Whitby and Pickering Railway line. Although it was possible to travel to Beckhole in 1835, the station was opened in 1836, and closed to passengers permanently in 1914. Beckhole closed completely in 1951.
Goathland Bank Top was a short lived, early, railway station in Goathland, North Yorkshire, England. The station at the top of the Beckhole Incline was opened with the opening throughout of the Whitby and Pickering Railway (W&P) on Thursday 26 May 1836. The station closed with the opening of the NER's Deviation line on 1 July 1865. Thus, the station had a life of less than thirty years. A new Goathland station was opened on the deviation line.
Helmsley railway station served the market town of Helmsley in North Yorkshire from 1871 until 1964, although the regular passenger service ceased in 1953. Helmsley station was nearly 15 miles (24 km) from Pilmoor station on the East Coast Main Line, and 12 miles (19 km) from Pickering.
The Grosmont Tunnels are two separate railway tunnels adjoining each other in the village of Grosmont, North Yorkshire, England. The first tunnel was built in 1835 and has now become a pedestrian route through to the North York Moors Railway (NYMR) engine sheds on the south side of the hill.
Newton Dale is a narrow dale within the North York Moors National Park in North Yorkshire, England. It was created by meltwater from a glacier carving the narrow valley. Water still flows through the dale and is known as Pickering Beck.
Grinkle Mine, was an ironstone mine working the main Cleveland Seam near to Roxby in North Yorkshire, England. Initially, the ironstone was mined specifically for the furnaces at the Palmer Shipbuilders in Jarrow on the River Tyne, but later, the mine became independent of Palmers. To enable the output from the mine to be exported, a 3-mile (4.8 km) narrow-gauge tramway was constructed that ran across three viaducts and through two tunnels to the harbour of Port Mulgrave, where ships would take the ore directly to Tyneside.
Whitby engine shed was a steam locomotive depot located at the south end of Whitby railway station in North Yorkshire, England. The shed was opened in 1847, extended in the 1860s, and closed in 1959, when the closure of lines and dieselisation of the routes from Whitby took hold. The shed building, which was grade II listed in 1991, still stands, being utilised for various enterprises, and is now used as holiday accommodation.
The Whitby Weighing Machine House is a grade II listed structure that is south of Whitby, North Yorkshire, England, between the Esk Valley line and the River Esk. The site was also where the original railway line allowed passengers to change into carriages pulled by horses on local roads, acting as the original railway terminus. The building is still largely extant, but mostly derelict, and is one of the few original Whitby and Pickering Railway (W&PR) buildings to still exist.
{{cite book}}
: CS1 maint: multiple names: authors list (link)