Wanderlust | |
---|---|
Role | Single-seat glider |
National origin | United Kingdom |
Manufacturer | Broburn Sailplanes Ltd, Woodley |
Designer | T. E. Brown and K. W. Radburn |
First flight | 1946 |
Number built | 1 |
The Broburn Wanderlust was a small, wooden, single-seat glider designed in the United Kingdom just after World War II. Only one was built, though it was well used.
The Wanderlust glider was designed and built by T. E. Brown and K. W. Radburn, two employees of Miles Aircraft, immediately after World War II. It was a single-seat, all-wood, shoulder-wing aircraft, with a short span for a glider of 34 ft (10 m) though with an aspect ratio of over 15. [1]
The wing of the Wanderlust was built around a single spar, which with plywood skin around the leading edge formed a torsion box. Behind the spar the wing was fabric covered. There was 4° of dihedral and 2° of washout. The trailing edge was spanned with aerofoil section flaps, split into two equal sections. Inboard, these acted as simple flaps; outboard, additionally, as drooping ailerons. The two NACA airfoil sections used in the wing were chosen because they have centres of pressure that vary little with the angle of incidence, which increases when the flaps are deployed. The Wanderlust also had upper surface spoilers hinged on the wing spar at about quarter span. [2]
The rest of the Wanderlust was plywood skinned, with a cockpit which could be open or enclosed in a bubble hood. The fuselage tapered aft, with the tailplane mounted on top and the small fin behind it. The elevators, with individual trim tabs, moved either side of the fin and the rudder was hinged behind their trailing edges. Both elevators and rudder were horn balanced. The Wanderlust landed on a pneumatically-mounted central skid. [1] [2]
Despite hopes of marketing the Wanderlust in finished and in kit form, [2] only one was made. This was flown by many pilots including Lorne Welch. It was in at store at RAE Farnborough about 1970 and later donated to the Museum of Berkshire Aviation. [1] [3]
Data from Ellison [1]
General characteristics
Performance
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.
The Slingsby Type 26 Kite 2 was a post World War II development of the Slingsby Kite, a single seat medium performance sailplane. It sold in small numbers.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Dart Cambridge was a single-seat competition sailplane built in the United Kingdom in the 1930s. A development of the Grunau Baby, only two were built, flying with gliding clubs.
The VTC Delfin is a competition single seat Standard class glider designed and built in Yugoslavia in the 1960s. It had some success in national competitions and went into small scale production.
The Ciani EC.37/53 Spillo or SSVV EC.37/53 Spillo was a single seat competition glider designed and built in Italy in the 1950s. It had the highest aspect ratio wing of any wooden glider. Only one was built.
The CVV 8 Bonaventura was a two-seat competition glider designed and built in Italy during the 1950s. Fifteen were produced.
The UTG-1 Loudon was an intermediate glider designed and built at the University of Toronto in Canada during the late 1940s.
The DTGL Sant' Ambrogio was an Italian single seat glider, designed and built by a 19-year-old model aircraft enthusiast, that competed in the 1938 national championships. Four more were constructed from his plans.
The CVT1 Zigilo was a single-seat, 12-metre-span (39 ft) Italian training glider designed and built in Italy in the 1950s. Only one was completed.
The CVT2 Veltro was an Italian competition glider built in the mid-1950s. Its advanced design incorporated a laminar flow wing, T-tail, retracting undercarriage and a reclining seat to reduce parasitic drag.
The IIL IS-5 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in 1960.
The IIL IS-10 was a high-performance, single-seat glider, designed and built in Romania in the early 1960s. It was the first Romanian aircraft to use laminar flow airfoils.
The IIL IS-11 was an aerobatic, single seat glider, designed and built in Romania in 1959. It was built in small numbers.
The Merville SM.31 is a French high performance glider with a laminar flow wing, first flown in 1960. Only one was built.
The Civil Aviation Department Ashvini was the first two-seat glider designed and built in India. It was produced in small numbers in the early 1960s.
The MSrE M-30 Fergeteg (Storm) was a Hungarian two seat advanced training glider. Originally designed in the early 1940s, its first flight was not made until 1950. Though five variants were developed, only six M-30s were built.