Canterbury and Whitstable Railway

Last updated

Canterbury and Whitstable Railway
Whitstable MAP28 2400.jpg
The northern terminus at Whitstable Harbour on 1938 map
Invicta, Canterbury, 1970s flip.jpg
Invicta preserved at Canterbury in the 1970s
Overview
Locale Kent, England
Dates of operation18301953
Successor South Eastern Railway
Technical
Track gauge 4 ft 8+12 in (1,435 mm)
Length6 miles 0 chains (9.66 km)
Route map

Contents

BSicon exKHSTa.svg
Whitstable Harbour
BSicon exHST.svg
Tankerton Halt
BSicon dCONTgq.svg
BSicon dHSTq.svg
BSicon xKRZo.svg
BSicon CONTfq.svg
Whitstable and Tankerton
BSicon exSTR.svg
Chatham Main Line
(Ramsgate Branch)
BSicon exHST.svg
South Street Halt
BSicon exHST.svg
Blean and Tyler Hill Halt
BSicon exTUNNEL1.svg
Tyler Hill Tunnel
828 yards (757 m)
BSicon dCONTgq.svg
BSicon dHSTq.svg
BSicon xKRZxr.svg
BSicon CONTfq.svg
Canterbury West
BSicon exSTR.svg
BSicon exKHSTe.svg
Canterbury North Lane
Original terminus 1830–1846

The Canterbury and Whitstable Railway, sometimes referred to colloquially as the "Crab and Winkle Line", was an early British railway that opened in 1830 between Canterbury and Whitstable in the county of Kent, England.

Early history

There are a number of other claimants to the title "first railway in Britain", including the Middleton Railway, the Swansea and Mumbles Railway and the Surrey Iron Railway amongst others.

Samuel Lewis in his 'A Topographical Dictionary of England' in 1848, called it the first railway in South of England. [1]

In 1823, William James visited Canterbury. He suggested to Canterbury City Council that a railway to link Canterbury and the Thames Estuary would help alleviate traffic problems in the city. The initial Act of Parliament for the construction of the line was passed on 10 June 1825. [2] Three further acts in 1827, 1828 and 1835 allowed for the issue of a further £80,000 of stock. [3] From the beginning, the Canterbury and Whitstable Railway was a public railway, intended for passengers as well as freight. Indeed, the world's first season ticket was issued for use on the line in 1834, [4] to take Canterbury passengers to the Whitstable beaches for the summer season. Unlike the Liverpool and Manchester Railway which opened four months later, it used cable haulage by stationary steam engines over much of its length, with steam locomotives restricted to the level stretch.

Until the early nineteenth century, Canterbury's line of supply for goods had been along the River Stour which flows to Pegwell Bay, near Ramsgate on the eastern coast of Kent. Although this is only seventeen miles (27 km) as the crow flies, the meandering river journey is around seventy miles (110 km). The river was continually silting up, and the cost of dredging such a length was prohibitive. Although turnpikes had been built, four or five carts were needed to carry the load of a single barge.

Whitstable, on the coast about seven miles (11 km) due north, was at that time a small fishing village and port with a trade in iron pyrites from the Isle of Sheppey. The idea for the line came from William James who surveyed the route and produced plans for improving the harbour. The immediate problem was that the land between Whitstable and Canterbury rose to a height of two hundred feet (61 m) and railway haulage on steep gradients was technically very difficult at that time. The only alternative would have been a much longer route through Sturry, Herne and Swalecliffe and land acquisition would have been a major cost.

Accordingly, the direct route was chosen, with three steep gradients, two of them to be worked by ropes from stationary steam engines at Clowes Wood and Tyler Hill. [5] From Canterbury North Lane station, the line climbed for 1 mile 70 chains (3.02 km) at 1 in 46 to Tyler's Hill, where there were two 25 horsepower (19 kW) winding engines. [3] At Tyler Hill, there was an 828-yard (757 m) tunnel.[ citation needed ] The gradient eased to 1 in 750 for a further 1 mile 10 chains (1.81 km) to the summit of the line at Clowes Wood, where there was a 15 horsepower (11 kW) winding engine. The line descended for 1 mile (1.61 km) at 1 in 31, followed by a level stretch of 1 mile 20 chains (2.01 km) before another descent at 1 in 53 for 40 chains (0.80 km) and a final level section of 20 chains (0.40 km) into Whitstable, giving a total length of 6 miles (9.66 km). [3]

Construction began in 1825 with George Stephenson as the engineer, with the assistance of John Dixon as resident engineer and Joseph Locke in charge of track. In 1827, following the boring of Tyler Hill Tunnel, work stopped through a lack of funds. Robert Stephenson took charge. Money was raised to enable the completion of the line. Dixon left the company, being replaced by Joshua Richardson. [2] The promoters returned to Parliament three more times to obtain authorisation for the raising of additional funds.[ citation needed ] The construction of Whitstable Harbour, under the direction of Thomas Telford, was completed in 1832. [6]

The line finally opened on 3 May 1830, [3] with a single track throughout and passing loops at Clowes Wood and the entrance to Tyler Hill tunnel.[ citation needed ] The track consisted of 28 pounds per yard (14 kg/m)fifteen-foot (4.6 m) fish-bellied iron rails, [7] laid on wooden sleepers at three-foot (0.91 m) intervals, the more usual alternative of stone blocks being considered too expensive. Initially, Stephenson had recommended the use of stationary engines for the three inclines, with horses for the level sections. However, the promoters insisted on use of a locomotive for the least difficult incline, and Invicta was procured from Robert Stephenson and Company, and it was brought to Whitstable by sea. [8] Unfortunately, the short gradient from Whitstable proved too much for it, and a third stationary engine was installed at Bogshole. [9] The original Whitstable Harbour station was north Harbour Street at Whitstable harbour. This caused problems as trains standing at the station held up shunting operations. [10] [9] For the first few years after opening, passengers were carried in open wagons that formed mixed trains. [11]

Canterbury and Whitstable Railway, shown with other railway lines in Kent Kent Railways.svg
Canterbury and Whitstable Railway, shown with other railway lines in Kent

The line was visited by Isambard Kingdom Brunel in 1835. The purpose of his visit was to conduct some experiments with a view to silencing some of the criticism he had received in relation to his proposals for the Great Western Railway, particularly the perceived problems of working a tunnel on a steep gradient, which Brunel wished to do at Box Tunnel. [12] [13]

Also in 1835, the Invicta was modified in order to improve its performance. The modification was unsuccessful and led to the locomotive being taken out of service and trains being hauled only by the stationary engines.[ citation needed ] in 1838, the line was leased to Nicholson & Bayless. [9] The C&WR tried to sell the Invicta in 1839 in order to clear some of its debts, but no buyer was found.[ citation needed ] In 1839, passenger services were five daily. [14] Nicholson and Bayless went bankrupt in 1841 and the line was advertised to let. [9]

Invicta was later given to the Canterbury City Corporation, and for many years stood on a plinth in the Dane John Gardens beside the Riding Gate. Invicta was then displayed, cosmetically restored, at the Canterbury Heritage Museum until 2018 when the museum closed. In 2019, Invicta was moved to the Whitstable Museum and Gallery and is now on display there.

South Eastern Railway

The line was bedevilled by financial problems and was facing bankruptcy when the South Eastern Railway, which had received the Royal Assent in 1844, agreed to take it over, operating it in isolation from their own line. Invicta by now was virtually useless and horse traction was being used.

When the South Eastern Railway's own network eventually reached Canterbury in 1846, [15] it decided to convert the line for use with its own locomotives throughout, [16] after upgrading the track using standard rails of 70 pounds per yard (35 kg/m). [7] Under George Stephenson's influence, the track had been built to standard gauge, but the loading gauge was small, the height of Tyler Hill Tunnel being only twelve feet (3.66 m) and the South Eastern locomotives were modified with shorter chimneys and lowered boilers. [16] Tayleur's 119 Class 0-6-0 locomotives were used. [17] Passenger services in 1846 were six trains daily, with five on Sundays. [14] Canterbury North Lane station closed to passengers in 1846 and Canterbury West subsequently served the line. [15] [11]

Two specially cut down SER locos for Tyler Hill Tunnel Ashford Locomotive Depot 2 geograph-2654059-by-Ben-Brooksbank.jpg
Two specially cut down SER locos for Tyler Hill Tunnel

The line was never prosperous, even under South Eastern management, and there was a new setback when the London, Chatham and Dover Railway opened in 1860 offering a better passenger service from Whitstable to London.[ citation needed ] Sunday trains were withdrawn in 1860. [14] The platform at Whitstable Harbour station was extended in the mid-1870s to take three carriages. [10] In 1883, two Stirling O Class 0-6-0 locomotives received cut down cabs to enable them to work the line. These were replaced by four Stirling R Class 0-6-0T locomotives in 1891, which worked the line until closure. [17] Canterbury North Lane closed to freight in 1891. [11] A new station opened at Whitstable Harbour on 3 June 1895. It was located south of Harbour Street thus enabling uninterrupted shunting in the harbour area. [18] [9] In 1898, Sunday trains were reinstated, running during summer only. [14]

In 1902, work started on building a spur line at Whitstable to connect with the Herne Bay to Faversham line and a bay platform at Whitstable Town station, but the work was stopped when the Board of Trade demanded major improvements to the C&W before they would approve the new connection. [19] In 1906, eleven trains a day were run. [14] A halt was opened at Blean and Tyler Hill on 1 January 1908, appearing in timetables from 13 June. [20] South Street Halt opened on 1 July 1911, [7] and Tankerton Halt opened on 1 July 1914. The latter was adjacent to Whitstable Town station and was linked by a footpath. [21] The service in 1914 was eleven trains a day. During the 1920s, the service was eight or nine trains a day. In 1930, there were six trains daily, with ten on Sundays. [14]

In 1923, the line became part of the Southern Railway and like many other lines around the country it suffered from competition from bus services.[ citation needed ] Passenger services were withdrawn after 1 January 1931, [17] due to falling numbers of passengers - from 51,000 in 1925 to 31,000 in 1927 and 23,000 in 1929. [22] There were up to four freight trains daily at this time. [17] The signal box at Whitstable closed on 11 February 1931 and the branch was worked as a siding from then on. [23] It continued to carry coal, grain and roadstone, with munitions to the harbour during World War II. By 1948, when it became part of British Railways, Whitstable Harbour had fallen into disuse and what was left of the line's trade had disappeared.

Site of Blean & Tyler Hill Halt in 1963 Blean & Tyler Hill Halt 1832585 b6e9dd33.jpg
Site of Blean & Tyler Hill Halt in 1963

Closure

The final scheduled freight train ran on 29 November 1952. [23] The line closed with effect from 1 December 1952, when R Class locomotive 31010 hauled two brake vans, [17] although there was a short reprieve during the floods of February 1953, the line being reopened from 5 February to 1 March in order for traffic to bypass the main line between Whitstable and Faversham damaged in the flood. [15] Afterwards, track was lifted almost immediately and the associated infrastructure was removed.

Surviving infrastructure

All traces of the Whitstable Harbour stations have been removed and the sites are occupied by public toilets and a medical centre, respectively. The concrete base of the former goods shed that stood between the mid-1920s and 2009 is still visible adjacent to the harbour, with the former entrance gates still displaying the initials "SE&CR" (South Eastern & Chatham Railway). The bridges crossing Teynham Road and the mainline were removed in the 1950s, although their abutments are still in place. The famous bridge at Old Bridge Road (previously Church Road) was demolished in 1969. The track bed leading from the site of the bridge adjacent to Whitstable railway station to the site of South Street Halt was surfaced in 1983 as a designated footpath and cycle track. There is no trace of South Street Halt, although remains of the level crossing gates were visible until the early 1980s. The railway embankment can be clearly seen from the adjacent cycle route bridge as it crosses fields and is cut through by the A299 road. A bridge remains near Bogshole Brook, which dates from the line's construction, although it was almost certainly reconstructed c.1846. A section of trackbed through Clowes Wood is also a footpath where the site of the winding house can be found. The site of Blean & Tyler Hill Halt is occupied by the driveway leading to a bungalow. About a half-mile section of trackbed remains abandoned leading to the visible blocked up tunnel mouths of Tyler Hill Tunnel. At the south end of the tunnel, the blocked up tunnel can be seen with a short section of embankment. South of Beaconsfield Road, there is a short section of embankment near St. Stephen's Pathway. A pedestrian tunnel is preserved, probably built during the 1830s following a death on the line. The site of Canterbury North Lane station was a goods yard until the 1980s when it was closed. A plan was mooted in the 1980s to open a railway museum on the site, but it remained derelict until being sold for housing development and the extension of Station Road West in about 1998. The Goods Shed was restored and became the country's first 6-day farmers' market and restaurant. The original weighbridge house and a level crossing gate into the former goods yard are preserved in the development. The Invicta has been preserved, having been extensively restored in 1979, and can be seen in the Whitstable Museum and Gallery. The locomotive is not in its original form, since various modifications were made around 1836 in an effort to improve its performance. One of the stationary steam engines also survives, having been in the possession of the University of Kent and is currently (2021) undergoing restoration. Its wheel and engine are visible in Whitstable Museum, Whitstable.

Part of the Tyler Hill tunnel collapsed at the beginning of July 1974, causing severe subsidence to some buildings at the University of Kent at Canterbury that had been built on the hill above. The resulting voids were filled over the next year, using fly-ash from Richborough power station. [24]

Preservation

This seat made by Tim Norris. It is part of a rest area beside the Winding Wheel Pond. The Winding Wheel Seat, Clowes Wood - geograph.org.uk - 1520926.jpg
This seat made by Tim Norris. It is part of a rest area beside the Winding Wheel Pond.

In 1997, a charity, The Crab and Winkle Line Trust, [25] was formed to reopen the route as a footpath and cycleway, 'The Crab and Winkle Way'. In 1999, a 7 mile long footpath and cycleway was opened between Canterbury and Whitstable, running along part of the original trackbed. [26] There are plans to allow public access to more of the line.

The Winding Pond, which formerly supplied water for the static winding engine which brought trains up the hill from Whitstable, was incorporated into a picnic and rest area for cyclists and walkers on the route.

Related Research Articles

<span class="mw-page-title-main">Whitstable</span> Town in Kent, England

Whitstable is a town on the north coast of Kent adjoining the convergence of the Swale Estuary and the Greater Thames Estuary in southeastern England, five miles north of Canterbury and two miles west of Herne Bay. The 2011 Census reported a population of 32,100.

The Leicester and Swannington Railway (L&SR) was one of England's first railways, built to bring coal from West Leicestershire collieries to Leicester, where there was great industrial demand for coal. The line opened in 1832, and included a tunnel over a mile in length, and two rope-worked inclined planes; elsewhere it was locomotive-operated, and it carried passengers.

<span class="mw-page-title-main">Maidstone East railway station</span> Railway station in Kent, England

Maidstone East railway station is one of three stations in the central area of Maidstone, Kent, England, but currently the only one with a regular direct service to London. The station is on the Maidstone line, 39 miles 76 chains (64.3 km) from London Victoria, and is served by trains operated by Southeastern.

<span class="mw-page-title-main">Ashford International railway station</span> Railway station in Kent, England

Ashford International railway station is a National Rail station in Ashford, Kent, England. It connects several railway lines, including High Speed 1 and the South Eastern Main Line. Services are operated by Southeastern and Southern.

<span class="mw-page-title-main">Hastings line</span> Railway line in Kent and East Sussex, England

The Hastings line is a secondary railway line in Kent and East Sussex, England, linking Hastings with the main town of Tunbridge Wells, and London via Tonbridge and Sevenoaks. Although primarily carrying passengers, the railway also serves a gypsum mine which is a source of freight traffic. SE Trains operates passenger trains on the line, and it is one of their busiest lines.

<span class="mw-page-title-main">South Eastern Main Line</span> Major long-distance railway line in south-east England

The South Eastern Main Line is a major long-distance railway route in South East England, UK, one of the three main routes crossing the county of Kent, going via Sevenoaks, Tonbridge, Ashford and Folkestone to Dover. The other routes are the Chatham Main Line which runs along the north Kent coast to Ramsgate or Dover via Chatham and High Speed 1 which runs through the centre of Kent to the coast at Folkestone where it joins the Channel Tunnel.

The history of rail transport in Great Britain to 1830 covers the period up to the opening of the Liverpool and Manchester Railway, the world's first intercity passenger railway operated solely by steam locomotives. The earliest form of railways, horse-drawn wagonways, originated in Germany in the 16th century. Soon wagonways were also built in Britain. However, the first use of steam locomotives was in Britain. The invention of wrought iron rails, together with Richard Trevithick's pioneering steam locomotive meant that Britain had the first modern railways in the world.

<span class="mw-page-title-main">East Kent Light Railway</span>

The East Kent Light Railway was part of the Colonel Stephens group of cheaply built rural light railways in England. Holman Fred Stephens was engineer from its inception, subsequently becoming director and manager. The line ran from Shepherdswell to Wingham Station with a branch from Eastry through Poison Cross to Richborough Port. Built primarily for colliery traffic within the Kent Coalfields, the line was built with many spurs and branches to serve the mines, with cancelled plans to construct extensions to several others. The success of Tilmanstone colliery allowed the main line of the railway to continue operation until 1986. A remainder of the line became the East Kent Railway, a heritage railway, in 1987.

<span class="mw-page-title-main">Elham Valley Railway</span> Former railway in England, now closed.

The Elham Valley Railway was a line connecting Folkestone and Canterbury in Kent, England. It opened between 1887 and 1889 and closed in 1947.

<i>Invicta</i> (locomotive) Preserved early British 0-4-0 locomotive

Invicta is an early steam locomotive, built by Robert Stephenson and Company in Newcastle-upon-Tyne during 1829. She was the twentieth locomotive built by railway engineers the Stephensons, being constructed immediately after Rocket. Invicta marked the end of the first phase of locomotive design, which had started with Richard Trevithick's Coalbrookdale locomotive of 1802.

<span class="mw-page-title-main">Whitstable Harbour railway station</span> Disused railway station in Kent

Whitstable Harbour railway station was the name of two disused railway stations serving Whitstable the terminus of the Canterbury and Whitstable Railway. The station opened in 1830. It was extended in the mid-1870s and resited in 1895. The Canterbury and Whitstable line closed to passengers in 1931 and freight in 1952, although it was reopened for a month following the North Sea flood of 1953.

<span class="mw-page-title-main">Tunnel Railway</span> Narrow-gauge underground railway in Ramsgate, Kent, England

The Tunnel Railway was a 2 ft narrow-gauge underground railway in Ramsgate, Kent, England. Following the restructuring of railway lines in Ramsgate in 1926, the section of line between Broadstairs and Ramsgate Harbour including a tunnel to the seafront at Ramsgate was abandoned. The narrow-gauge Tunnel Railway was opened within the disused tunnel in 1936 to connect tourist attractions and shops near Ramsgate harbour with the new railway main line at Dumpton Park.

<span class="mw-page-title-main">Elham railway station</span> Disused railway station in Kent

Elham railway station is a disused railway station on the Elham Valley Railway which served the village of Elham in Kent and the surrounding villages. Situated to the east of Elham the clapboard station was opened in 1887. In 1931 the line was singled and one platform was closed. Regular passenger services were withdrawn on 1 December 1940 when the line was taken over for military use. In 1946 the line was reopened for goods traffic but a year later this service ceased when the station was officially closed. After closure the station building was demolished but one platform still exists forming a retaining wall of a garden for a house now built on the station site.

North Lane railway station was the original station of the Canterbury and Whitstable Railway in Canterbury, Kent, United Kingdom. It opened in 1830, closed to passengers in 1846 and to freight in 1891.

<span class="mw-page-title-main">Bishopsbourne railway station</span> Former railway station in Kent, England

Bishopsbourne was a station on the Elham Valley Railway. It opened in 1889 and closed to passengers in 1940 and freight in 1947.

<span class="mw-page-title-main">Barham railway station</span> Disused railway station in Barham, Kent

Barham was a station on the Elham Valley Railway. It opened in 1887 and closed to passengers in 1940 and freight in 1947.

Tankerton Halt was a minor station on the Canterbury and Whitstable Railway at Tankerton, Kent. It opened in 1914 and closed in 1931.

South Street Halt was a minor station on the Canterbury and Whitstable Railway at Tankerton, Kent. It opened in 1911 and closed in 1931.

<span class="mw-page-title-main">Blean and Tyler Hill Halt railway station</span> Disused railway station in Kent

Blean and Tyler Hill Halt was a minor station on the Canterbury and Whitstable Railway at Tyler Hill, Kent. It opened in 1908 and closed in 1931.

References

  1. Lewis 1848, pp. 555–557.
  2. 1 2 Harding 1996, p. 6.
  3. 1 2 3 4 Whishaw 1842, pp. 50–51.
  4. Searle 1982, p. 12.
  5. Mitchell & Smith 1995, Whitstable Harbour Branch.
  6. Mitchell & Smith 1995, Whitstable Harbour.
  7. 1 2 3 Mitchell & Smith 1995, Illustration 94.
  8. "The world's first steam-hauled passenger railway". Kentfind.co.uk. Retrieved 3 March 2020.
  9. 1 2 3 4 5 Harding 1996, p. 7.
  10. 1 2 Mitchell & Smith 1995, Illustration 98.
  11. 1 2 3 Mitchell & Smith 1995, Illustration 88.
  12. "Past". The Crab and Winkle Line Trust. Retrieved 3 March 2020.
  13. Mitchell & Smith 1995, Illustration 92.
  14. 1 2 3 4 5 6 Mitchell & Smith 1995, Passenger Services.
  15. 1 2 3 Scott-Morgan 2008, pp. 74–75.
  16. 1 2 Gammell 1997, p. 48.
  17. 1 2 3 4 5 Harding 1996, p. 8.
  18. Mitchell & Smith 1995, Illustration 99.
  19. Mitchell & Smith 1995, Illustration 96.
  20. Mitchell & Smith 1995, Illustration 93.
  21. Mitchell & Smith 1995, Illustration 95.
  22. Mitchell & Smith 1995, Illustration 101.
  23. 1 2 Mitchell & Smith 1995, Illustration 102.
  24. Martin 1990, pp. 225–231.
  25. "About". Crab and Winkle Line Trust. Retrieved 3 March 2020.
  26. Wood 2009, pp. 73–77.

Bibliography

Further reading