Chicago and North Western Z Class

Last updated
C&NW class Z
Omaha Road class Z
CNW 1455 class Z (American Engineer 1910 p262).jpg
C&NW 1455, the first of the class Z (Alco 46607 of 1909)
Type and origin
Power typeSteam
Builder
Serial numbersee table
Build date1909–1913
Total produced251
Specifications
Configuration:
   Whyte 2-8-0
   UIC 1′D n2, later 1′D h2
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.61 in (1.549 m)
Wheelbase 36 ft 5 in (11 m)
Loco weight235,000–243,500 pounds (106,600–110,400 kg)
Firebox:
  Firegrate area
52.68 sq ft (4.894 m2) (108 in × 70+14 in or 2.743 m × 1.784 m)
Boiler:
  Diameter81+12 in (2.070 m)
Boiler pressure170 lbf/in2 (1.17 MPa)
Cylinders Two, outside
Cylinder size 25 in × 32 in (635 mm × 813 mm)
Valve gear Walschaerts or Baker
Valve type14 in (360 mm) piston valves
Valve travel6 in (150 mm)
Performance figures
Tractive effort 47,500 lbf (211.29 kN)
Career
Operators
Number in class
  • CNW: 249
  • CMO: 2
Numbers
  • CNW: 1455–1494, 1700–1910
  • CMO: 219–220
DispositionAll scrapped

The Chicago and North Western Railway class Z (and Omaha Road class Z) was a class of 251 American 2-8-0 locomotives. They were built between 1909 and 1913, when production switched to the larger class J 2-8-2 locomotives. The class letter spawned their nickname amongst C&NW and Omaha Road crews: "Zulu". [1]

Contents

Design

The locomotives has boiler pressed to 170 pounds per square inch (1.2 MPa) feeding steam to two cylinders that had a 25-inch (640 mm) bore and a 32-inch (810 mm) stroke. These were connected to 61-inch (1,500 mm) driving wheels buy Walschaerts valve gear, although the last 47 were built with Baker valve gear. They had 14-inch (360 mm) piston valves with 6 inches (150 mm) travel. The firebox was of the radial-stay pattern, 108 inches (2,700 mm) deep by 70+14 inches (1,780 mm) wide. The resulting 52.68 square feet (4.894 m2) was 14 per cent larger than the class R-1.

Construction

Apart from a batch of 25 built by the Baldwin Locomotive Works, all the locomotives were built by the American Locomotive Company at their Schenectady plant. Baldwin classified their locomotives as 10-48-E

Service

On the C&NW, they were used system-wide on freight trains, and were the principle freight-hauling locomotive on the railway until the arrival of the class J Mikados. The extra power over the existing freight locomotives enabled running 75-car trains; unfortunately, older wooden-framed freight cars could not stand the punishment and a large number of "bad-ordered" cars required repairs. [1] The Omaha Road used its pair, like all its 2-8-0s, in switching, transfer and helper service. [4] They had in fact been delivered a week after the Omaha Road's first class J 2-8-2 locomotives. [5]

When new all had been built as hand-fired coal-burning locomotives. The large grates were tricky to fire and several firemen resigned as a result. [1] At least 17 were fitted-up for oil-firing for use in Wyoming, where fuel oil was readily available. Twelve others received mechanical stokers during World War II.

In 1942, several locomotives were leased out to other operators; by war's end, these had either been purchased or returned. Sales included five to American Smelting and Refining Company (ASRCo), five to the Seaboard Air Line Railroad (SAL), two to the St. Louis Southwestern Railway (Cotton Belt or SSW), 25 to the Ferrocarriles Nacionales de México (NdeM) directly, and another seven via a dealer. They also later acquired ASRCo's five.

The first retirement was in 1936; fifty were still in service in mid-1948. The Omaha Road retired both of its Zulus in June 1956. [3]

No locomotives of this class have been preserved.

Related Research Articles

<span class="mw-page-title-main">Baldwin Locomotive Works</span> American manufacturer of railroad locomotives from 1825 to 1956

Baldwin Locomotive Works (BLW) was an American manufacturer of railway locomotives from 1825 to 1951. Originally located in Philadelphia, Pennsylvania, it moved to nearby Eddystone in the early 20th century. The company was for decades the world's largest producer of steam locomotives, but struggled to compete when demand switched to diesel locomotives. Baldwin produced the last of its 70,000-plus locomotives in 1951, before merging with the Lima-Hamilton Corporation on September 11, 1951, to form the Baldwin-Lima-Hamilton Corporation.

<span class="mw-page-title-main">4-6-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-6-2 represents the wheel arrangement of four leading wheels on two axles, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The 4-6-2 locomotive became almost globally known as a Pacific type after a New Zealand locomotive that was shipped across the Pacific Ocean.

<span class="mw-page-title-main">4-8-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type.

<span class="mw-page-title-main">4-6-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of locomotives, 4-6-4 represents the wheel arrangement of four leading wheels, six powered and coupled driving wheels and four trailing wheels. In France where the type was first used, it is known as the Baltic while it became known as the Hudson in most of North America.

<span class="mw-page-title-main">Chicago Great Western Railway</span> Class I railroad that linked Chicago, Minneapolis, Omaha, and Kansas City

The Chicago Great Western Railway was a Class I railroad that linked Chicago, Minneapolis, Omaha, and Kansas City. It was founded by Alpheus Beede Stickney in 1885 as a regional line between St. Paul and the Iowa state line called the Minnesota and Northwestern Railroad. Through mergers and new construction, the railroad, named Chicago Great Western after 1892, quickly became a multi-state carrier. One of the last Class I railroads to be built, it competed against several other more well-established railroads in the same territory, and developed a corporate culture of innovation and efficiency to survive.

Under the Whyte notation for the classification of steam locomotives, 2-10-2 represents the wheel arrangement of two leading wheels, ten powered and coupled driving wheels, and two trailing wheels. In the United States of America and elsewhere the 2-10-2 is known as the Santa Fe type, after the Atchison, Topeka and Santa Fe Railway that first used the type in 1903.

<span class="mw-page-title-main">4-4-0</span> Locomotive wheel arrangement

4-4-0 is a locomotive type with a classification that uses the Whyte notation for the classification of steam locomotives by wheel arrangement and represents the arrangement: four leading wheels on two axles, four powered and coupled driving wheels on two axles, and a lack of trailing wheels. Due to the large number of the type that were produced and used in the United States, the 4-4-0 is most commonly known as the American type, but the type subsequently also became popular in the United Kingdom, where large numbers were produced.

<span class="mw-page-title-main">4-6-0</span> Railway steam locomotive wheel arrangement

A 4-6-0 steam locomotive, under the Whyte notation for the classification of steam locomotives by wheel arrangement, has four leading wheels on two axles in a leading bogie and six powered and coupled driving wheels on three axles with the absence of trailing wheels.

<span class="mw-page-title-main">Chicago and North Western Transportation Company</span> Rail transport company

The Chicago and North Western was a Class I railroad in the Midwestern United States. It was also known as the "North Western". The railroad operated more than 5,000 miles (8,000 km) of track at the turn of the 20th century, and over 12,000 miles (19,000 km) of track in seven states before retrenchment in the late 1970s. Until 1972, when the employees purchased the company, it was named the Chicago and North Western Railway.

<span class="mw-page-title-main">2-8-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-8-2 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. This configuration of steam locomotive is most often referred to as a Mikado, frequently shortened to Mike.

<span class="mw-page-title-main">Grand Trunk Western Railroad</span> American railroad

The Grand Trunk Western Railroad Company was an American subsidiary of the Canadian National Railway operating in Michigan, Illinois, Indiana, and Ohio. Since a corporate restructuring in 1971, the railroad has been under CN's subsidiary holding company, the Grand Trunk Corporation. Grand Trunk Western's routes are part of CN's Michigan Division. Its primary mainline between Chicago and Port Huron, Michigan serves as a connection between railroad interchanges in Chicago and rail lines in eastern Canada and the Northeastern United States. The railroad's extensive trackage in Detroit and across southern Michigan has made it an essential link for the automotive industry as a hauler of parts and automobiles from manufacturing plants.

<span class="mw-page-title-main">4-4-2 (locomotive)</span> Railway locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-4-2 represents a configuration of a four-wheeled leading bogie, four powered and coupled driving wheels, and two trailing wheels supporting part of the weight of the boiler and firebox. This allows a larger firebox and boiler than the 4-4-0 configuration.

<i>Twin Cities 400</i> Former passenger train service between Chicago and Saint Paul

The 400 was a named passenger train operated by the Chicago and North Western Railway between Chicago and Saint Paul, with a final stop in Minneapolis. The train took its name from the schedule of 400 miles between the cities in 400 minutes, and was also a nod to "The Four Hundred Club", a term coined by Ward McAllister to refer to the social elite of New York City in the late 19th century. It was an express train with limited stops between Chicago and the Twin Cities. The "400" ran from 1935 to 1963 on the Chicago to Twin Cities route. The C&NW later named their other passenger trains using the number "400".

The Fremont and Elkhorn Valley Railroad was a 17-mile (27 km) heritage railroad headquartered in Dodge County, Nebraska and, offered excursion services on the line. Its equipment is now owned by the Nebraska Railroad Museum.

<span class="mw-page-title-main">LNWR 18in Goods Class</span>

The LNWR 18-inch Goods was a class of 310 0-6-0 freight steam locomotives built by the London and North Western Railway at their Crewe Works between 1880 and 1902.

<span class="mw-page-title-main">Chicago and North Western R-1 Class</span> Class of 325 American 4-6-0 locomotives

The Chicago and North Western R-1 class was a class of 325 4-6-0 "Ten-Wheeler" steam locomotives built by the Schenectady Locomotive Works, the American Locomotive Company, and the Baldwin Locomotive Works from 1901 to 1908. The R-1 locomotives were so large and so heavy that the Chicago and North Western (C&NW) Railroad had to extensively rebuild their trackage, bridges, tunnels, turntables, and enginehouses to accommodate them.

The Chicago and North Western Railway class J was a class of 310 American 2-8-2 locomotives. They were built between 1913 and 1923 by the American Locomotive Company. In addition, the Chicago, St. Paul, Minneapolis and Omaha Railway acquired 32, and also classified them as class J.

<span class="mw-page-title-main">Chicago and North Western D Class</span>

The Chicago and North Western Railway D Class was a class of 92 American 4-4-2 "Atlantic" locomotives. They were built by Schenectady Locomotive Works and by its corporate successor the American Locomotive Company between 1900 and 1908. In addition, the Chicago, St. Paul, Minneapolis and Omaha Railway bought seven, classifying them as class G-3

The Great Northern O-1 was a class of 145 2-8-2 "Mikado"-type steam locomotives built by the Baldwin Locomotive Works between 1911 and 1919 and used by the Great Northern Railway until the late 1950s.

<span class="mw-page-title-main">Chicago and North Western 175</span> Preserved American 4-6-0 locomotive

Chicago and North Western 175 is a preserved standard gauge class "R-1" 4-6-0 "Ten Wheeler" type steam locomotive. Built by ALCO in 1908, the locomotive was used for pulling various passenger and freight trains throughout Wisconsin, until the Chicago and North Western Railway ended steam operations in 1957. In 1964, the locomotive was leased to Clint Jones, who had plans to use it on the Keweenaw Central Railroad for excursion service alongside Copper Range 2-8-0 No. 29, but restoration work was never completed under his ownership. After spending over four decades in outdoor storage in Hancock, Michigan, No. 175 was purchased in 2018 by the Steam Railroading Institute, who moved to their location in Owosso, Michigan, and they are currently rebuilding the locomotive to serve as a running mate to Pere Marquette 2-8-4 No. 1225.

References