Churruca-class destroyer (1927)

Last updated

Destructor Jose Luis Diez (DZ).jpg
Destroyer José Luis Diez
Class overview
NameChurruca class
Builders SECN, Naval Dockyard, Cartagena.
Operators
Preceded by
Succeeded by
Subclasses
  • Cervantes class
  • Alava class
Built1923–1951
In commission1927–1982
Completed18
Lost2
Retired16
General characteristics
Type Destroyer
Displacement
  • 1,560–1,676 t (1,535–1,650 long tons) (standard)
  • 2,120–2,205 t (2,087–2,170 long tons) (full load)
Length101.50 m (333 ft 0 in) oa
Beam9.68 m (31 ft 9 in)
Draught3.20 m (10 ft 6 in)
Installed power
Propulsion2 Parsons turbines
Speed36 knots (67 km/h)
Range4,500 nmi (8,300 km) at 14 knots (26 km/h)
Complement175
Armament
  • 5 × 120 mm (4.7 in) L45 guns in single mounts
  • 1 × 76 mm (3 in) anti-aircraft gun
  • 4 × machineguns
  • 6 × 533 mm (21 in) torpedo tubes in two triple mounts
  • 2 × depth charge throwers

The Churruca class was a Spanish destroyer class built for the Spanish Navy based on a British design. Eighteen ships were built, with two being sold to Argentina and commonly referred to as the Cervantes class. The last two members of the class are sometimes referred to as a separate class, the Alava class.

Contents

The ships were authorized on 17 February 1915 by Navy Minister Augusto Miranda y Godoy. The program planned for four light cruisers, six destroyers, 28 submarines, three gunboats, and 18 coast guard vessels; of these, five light cruisers, three Alsedo and fourteen Churruca-class destroyers, 16 submarines, and the three gunboats were actually completed. The class was built in three groups, with the first group beginning construction in 1923 and the final group's construction delayed by the Spanish Civil War and World War II which led to their completion only in 1957. Some of the later ships of the class were completed without the central gun due to an arms embargo during the Spanish Civil War.

The Churruca class took part in the Spanish Civil War as part of the Spanish Republican Navy, with one being lost in battle. Following the end of the civil war, the destroyers were integrated into the navy of Francoist Spain. They continued in service until the 1950s–1960s when they were discarded. The two completed after World War II remained in service until the early 1980s.

Design

The Churruca class came in three groups. Initially, the first three ships were intended to be repeats of the previous Alsedo class. However, a financial delay prevented this once the project was refinanced the first group was based on the British Admiralty type flotilla leader (Scott class) design. The destroyers had a standard displacement of 1,560 tonnes (1,535 long tons) and were 2,120 tonnes (2,087 long tons) at full load. They were 101.50 metres (333 ft 0 in) long overall and 97.52 metres (319 ft 11 in) between perpendiculars with a beam of 9.68 metres (31 ft 9 in) and a mean draught of 3.20 metres (10 ft 6 in). [1]

The Churruca class were propelled by two shafts driven by Parsons geared turbines powered by steam provided by four Yarrow boilers. The engines were rated at 42,000 shaft horsepower (31,319 kW) and the destroyers had a maximum speed of 36 knots (67 km/h; 41 mph). The Churruca class had 508 tonnes (500 long tons) capacity for fuel oil. The destroyers had a complement of 175 officers and ratings. [1]

The class was armed with five 120-millimetre (4.7 in) L45 guns in single mounts. They had one 76 mm (3 in) gun for anti-aircraft defence and four machine guns. They were also equipped with six 533 mm (21 in) torpedo tubes in two triple mounts and two depth charge throwers. [1] [2]

The second group differed only slightly from the first. Their displacement was greater, at 1,543 tonnes (1,519 long tons) standard and 2,209 tonnes (2,174 long tons) at full load and they had greater bunkerage for the fuel oil, with capacity for 548 tonnes (539 long tons), which gave them a range of 4,500 nautical miles (8,300 km; 5,200 mi) at 14 knots (26 km/h; 16 mph). [2] [3] The third group differed greatly, as their construction had been delayed and newer systems were added. Their displacement was increased again, at 1,676 tonnes (1,650 long tons) standard and 2,205 tonnes (2,170 long tons) at full load. They retained the increased fuel capacity and range of the second group while having different armament. They were equipped with four 120 mm guns and but had six 37 mm (1.46 in) in three twin mounts and three 20 mm (0.79 in) cannon for anti-aircraft defence. [4]

In the early 1940s, all the surviving Spanish ships were modified and had one of the 120 mm guns landed and were given two twin-mounted 37 mm guns and four 20 mm cannon for improved anti-air defence. They retained their torpedo tubes, but the number of depth charge throwers was increased to four. In later years, some of the 37 mm and 20 mm guns were removed. The third group, or Alava class, underwent modernisation in the early 1960s. Their forecastle was lengthened by 8.0 metres (26 ft 3 in) and the displacement increased to 1,842 tonnes (1,813 long tons) standard and 2,287 tonnes (2,251 long tons) at full load. The engines were rerated at 31,500 shp (23,490 kW) and the ships had a maximum speed of 29 knots (54 km/h; 33 mph), with fuel oil capacity of 370 tonnes (364 long tons). Their armament was completely made over, with three single 76 mm/50 calibre guns, three 40 mm/70 calibre SP48 anti-aircraft guns, two side-launching racks for six anti-submarine (ASW) torpedoes, two Hedgehog ASW mortars, eight depth charge throwers and two depth charge racks. A lattice mast was added and caps were placed on the funnels and they were given MLA-1B air search radar, SG-6B surface search radar, Decca TM-626 navigational radar and two Mk 63 fire control radar sets. For ASW, the two ships were equipped with SQS-30A hull-mounted sonar. [5]

In Argentine Navy service, the two vessels that became known as the Cervantes class had their midships 120 mm gun replaced with two twin 40 mm (2 in) guns with the 76 mm gun later being replaced with a further twin 40 mm mount. [6] Two of the twin mounts were located between the funnels and one after of the funnels. [7]

Ships in class

Churruca-class destroyers [2] [5] [8]
NameBuilderLaunchedCommissionedFateNotes
1st group
Churruca Cadiz [lower-alpha 1] 26 June 19253 September 1927Decommissioned 1961Sold to Argentina 1927, renamed ARA Cervantes.
Alcalá Galiano La Carraca, Cartagena2 November 1925Decommissioned 1960Sold to Argentina 1927, renamed ARA Juan de Garay.
Sánchez Barcáiztegui S.E.C.N. Cartagena24 July 19261929Stricken 1960s
José Luis Díez 25 August 19281930Stricken 1960s
Almirante Ferrándiz 21 May 19281930Sunk in action on 29 September 1936 by the cruiser Canarias
Lepanto 7 November 19291931Stricken August 1957
Churruca June 19291932Stricken 1960s
Alcalá Galiano 12 April 19301932Stricken 1957
Almirante Valdes 8 September 19301932Stricken 1957
2nd group
Almirante Antequera S.E.C.N. Cartagena29 December 1930July 1936Stricken 1960s
Almirante Miranda 20 June 1931July 1930Stricken 2 March 1970
Císcar 26 October 19331937Ran aground 17 October 1957
Escaño 28 June 1932September 1936Stricken 1960s
Gravina 24 December 1931September 1936Stricken 1960s
Jorge Juan 28 March 19331937Stricken 1959
Ulloa 24 July 19331937Stricken 1960s
3rd group
Alava Bazán, Cartagena19 June 194721 December 1950Stricken 2 November 1978
Liniers 1 May 194627 January 1957Stricken 1982

History

In 1915, the Spanish government authorised an extensive building programme by the Spanish Navy. The first three ships of the Churruca class were intended to be members of the Alsedo class which was based on the British M class but and were planned for construction during World War I. However, due to financial constraints, their construction was put off and when financing was approved for the new destroyers in 1922, a newer design was chosen. The first Churruca and Alcalá Galiano were sold to Argentina, and were replaced by two new destroyers bearing the same name. The class was considered successful, which led the Spanish government ordering a second group. Two vessels of the last group's construction became delayed by the Spanish Civil War and World War II, that they eventually became a third group. The first Churrucas began entering service with the Spanish Navy in 1929. [1]

Spanish service

On the eve of the rebellion in the Spanish protectorate in Morocco, the active Churruca-class destroyers were ordered into the Gibraltar Strait to prevent any rebels from crossing to Spain. Churruca sailed to Ceuta where the destroyer joined the Nationalists. Churucca then transported Nationalist troops to Cadiz on 19 July 1936. However, the crew arrested the officers and rejoined the Spanish Republican Navy. Almirante Ferrándiz and Gravina took part in the Battle of Cape Espartel, where Almirante Ferrándiz was sunk by the Nationalist cruiser Canarias. Lepanto, Almirante Valdes, Almirante Antequera, Gravina, Jorge Juan, and Escaño participated in the Battle of Cape Cherchell. Lepanto, Sánchez Barcaiztegui, Almirante Miranda and Grafina were engaged in the Battle of Cape Palos, where Lepanto sank the Nationalist cruiser Baleares with torpedoes. Ciscar was sunk by aircraft in Gijon harbour, refloated by the rebels, and used by them in the final phases of the war. [9]

Sánchez Barcaiztegui was bombed and sunk in shallow water at Cartagena in March 1939, but later raised and returned to service following the war. José Luis Díez was severely damaged in an encounter with Canarias and was beached in Catalan Bay. The ship was raised and towed to Gibraltar where the vessel was interned until the end of the war. When the Spanish Civil War ended, the class was turned over to the Nationalists. Spain remained neutral during World War II Ciscar ran aground in fog off El Ferrol in October 1957. Salvage of the ship was abandoned in 1958 and the vessel was stricken. [9]

Construction of what became the third group was delayed due to the Spanish Civil War and began again in 1939. However, construction was stopped in 1940 due to World War II. They were finished only after the war. The remaining ships of the first and second groups underwent modernisation in the 1950s and further updates were planned but later cancelled in the 1960s. The third group were modernised in the early 1960s and rerated as "fast frigates". Liniers was used for midshipman training at the Naval Academy until 1982. Liniers, the last of the class, was stricken in 1982. [5]

Argentinian Navy service

The initial Churruca (1925), sold to Argentina in 1927 and renamed ARA Cervantes Destructor ARA Cervantes (C).jpg
The initial Churruca (1925), sold to Argentina in 1927 and renamed ARA Cervantes

Churruca and Alcalá Galiano were sold to the Argentine Navy while under construction on 10 June 1926. They were renamed ARA Cervantes (E1) and ARA Juan de Garay (E2) respectively. Cervantes reached 39.76 knots (73.64 km/h; 45.75 mph) while on sea trials. [6] The ships were commissioned on 3 September 1927 and modernised after World War II. In 1952, the two vessels were reclassified as destroyer escorts (torpederos). [7]

Cervantes was severely damaged by Gloster Meteor fighters loyal to Juan Domingo Perón while evacuating personnel from the rebel naval base of Río Santiago during the 1955 Revolución Libertadora. She was placed in reserve in May 1961. Juan de Garay was used as a training vessel from 1952–1959. [7] Cervantes was stricken on 24 June 1961 and Juan de Garay on 25 March 1960. [6]

Notes

  1. Whitley has La Carraca, Cartagena as the builder, while Chesneau has Cadiz.

Citations

  1. 1 2 3 4 Whitley, pp. 242–243
  2. 1 2 3 Chesneau, p. 401
  3. Whitley, p. 244
  4. Whitley, p. 245
  5. 1 2 3 Gardiner, Chumbley & Budzbon, p. 430
  6. 1 2 3 Whitley, p. 15
  7. 1 2 3 Gardiner, Chumbley & Budzbon, p. 4
  8. Whitley, pp. 15, 243–245
  9. 1 2 Whitley, pp. 244–245

Related Research Articles

<i>Almirante Padilla</i>-class frigate

The Almirante Padilla-class frigates is a series of frigates operated by the Colombian Navy. The designation of this class is Type FS 1500 and there are four ships in service. The ships were built by Howaldtswerke-Deutsche Werft (HDW) at Kiel, West Germany in the 1980s, with the first vessel commissioning in 1983 and the last in 1984. The frigates have undergone significant modification over their careers with the 2012 Orion Program Upgrade significantly modernising the vessels. Two similar ships operate as the Kasturi-class corvettes in the Royal Malaysian Navy.

HSwMS <i>Sjölejonet</i> (1936)

HSwMS Sjölejonet was the lead ship of a class of nine naval submarines in the service of the Swedish Navy from just before World War II into the early Cold War. The submarines were ordered in response to the rising German threat to the south in the interwar period. Sjölejonet remained in service until 1959 and was sold for scrap in 1962.

<i>Almirante Brown</i>-class destroyer Class of Argentine warships

The Almirante Brown class is a class of warships built for the Argentine Navy. They were commissioned between 1983 and 1984, after the Falklands War. The class comprised four ships; Almirante Brown, La Argentina, Heroína and Sarandí. Heronia was retired in 2024 after a period of prolonged inactivity.

Tripartite-class minehunter Ship class of minehunters

The Tripartite class is a class of minehunters developed from an agreement between the navies of Belgium, France and the Netherlands. A total of 35 ships were constructed for the three navies. The class was constructed in the 1980s–1990s in all three countries, using a mix of minehunting, electrical and propulsion systems from the three member nations. In France, where they are known as the Éridan class they are primarily used as minehunters, but have been used for minesweeping and ammunition transport in Belgium and the Netherlands, where the Tripartites are known as the Alkmaar class.

MEKO 360 Family of German-designed warships

The MEKO 360 is a class of five ships built in Germany for the Argentine and Nigerian navies. The MEKO 360 was the first version of the MEKO family of vessels built by Blohm und Voss. The type comes in two variants, the MEKO 360H1, comprising one ship, and the MEKO 360H2, comprising four ships. They are alternatively classed as frigates and destroyers by different sources. The design is based on the modular concept which allows swapping out different armaments to fit mission requirements and allows for easier application of upgrades and refits.

Kuha-class minesweeper (1974)

The Kuha-class minesweepers is a series of six inshore minesweepers of the Finnish Navy. The ships were constructed in 1974–1975. All the vessels of the class were modified and modernized in the late 1990s, including a lengthening of the hull. Two of the class were withdrawn from service in 2012. The rest of the class will be retired with the entry into service of the Katanpää-class mine countermeasure vessels.

<i>Hatsuharu</i>-class destroyer Ship class

The Hatsuharu-class destroyers were a class of Imperial Japanese Navy destroyers in the service before and during World War II. The final two vessels in the class, completed after modifications to the design, are sometimes considered a separate "Ariake class".

<i>Marcílio Dias</i>-class destroyer Three Brazilian Navy ships

The Marcílio Dias-class destroyers were three destroyers of the Brazilian Navy that served during World War II. They were based on the United States Navy's Mahan class. They entered service in 1943 and served on Atlantic convoy duty with the Allies. In July 1944, the three destroyers escorted the Brazilian Expeditionary Force to Italy. Following the end of the war, the destroyers remained in service, undergoing modernisation. Two were discarded in 1966, with the last taken out of service in 1973.

Spanish destroyer <i>Sánchez Barcáiztegui</i>

Sánchez Barcáiztegui was a Churruca-class destroyer of the Spanish Republican Navy. She took part in the Spanish Civil War on the side of the government of the Second Spanish Republic.

Poti-class corvette

The Poti class was the NATO reporting name for a group of anti-submarine warfare (ASW) corvettes built for the Soviet Navy. The Soviet designation was Project 204 small anti-submarine ships. These ships were the first Soviet warships powered by gas turbine engines; two propellers were mounted in tunnels to give a very shallow draught. A twin 57 mm (2 in) gun mounting provided self-defence. Three ships of the class were exported to Romania and six to Bulgaria during the Cold War. By 2008, all ships of the class were no longer extant.

<i>Ruotsinsalmi</i>-class minelayer Finnish navy minelayer class

The Ruotsinsalmi-class minelayers were a two-strong class of minelayers in the Finnish Navy. The two ships, comprising Ruotsinsalmi and Riilahti, were constructed in Finland and saw service in the Winter War and World War II. Riihahti was sunk in an engagement with Soviet motor torpedo boats on 23 August 1943. Ruotsinsalmi survived the wars and remained in service in the post war Finnish Navy until being withdrawn in the 1970s.

Project 1252 'Izumrud' were a group of three minesweepers built for the Soviet Navy in the late 1960s. The ships were a glass-reinforced plastic (GRP)-hulled version of the preceding wooden-hulled Vanya class. They were intended to be a prototype of an advanced design, instead the Soviet Navy returned to wooden-hulled minesweeper construction with the following Sonya class. Of the three minesweepers, one was lost in an explosion in 1989 and the fate of the other two is unknown.

Spanish cruiser <i>Almirante Cervera</i> Almirante Cervera-class cruiser

Almirante Cervera was a light cruiser and lead ship of the Almirante Cervera class of the Spanish Navy. She was named after the Spanish admiral Pascual Cervera y Topete, commander of the Spanish naval forces in Cuba during the Spanish–American War. She was part of the Spanish Republican Navy between 1931 and 1936, year in which she became a key player of the Nationalist Fleet in the Spanish Civil War.

<i>Mendoza</i>-class destroyer

The Mendoza class were a series of three destroyers built in the United Kingdom for the Argentine Navy in the 1920s. They were the first part of the Argentine re-armament programme of the 1920s. Construction began in 1927 and all three were commissioned in 1929. All three destroyers were converted to anti-aircraft escorts in 1958 and remained in service until 1962 when they were discarded.

<i>Alsedo</i>-class destroyer Spanish destroyer class

The Alsedo class was a Spanish class of destroyer. Three ships were built, based on a British design, entering service between 1924 and 1925. They all served through and survived the Spanish Civil War, two on the Republican side and one with the Nationalists. The class was retired in 1957–1961.

<span class="mw-page-title-main">Spanish Republican Navy</span> Military unit

The Spanish Republican Navy was the naval arm of the Armed Forces of the Second Spanish Republic, the legally established government of Spain between 1931 and 1939.

<i>Engin de débarquement dinfanterie et de chars</i>

The EDIC or Engin de débarquement d'infanterie et de chars are large landing craft that operate in the French Navy, Lebanese Navy, Senegalese Navy, and Madagascar Navy. EDICs have the typical landing craft utility design with a bow ramp and have a large aft superstructure compared to the derivative CDIC. The EDIC vessels were constructed in three groups, the first were launched in 1958, the second in 1967–1969 and the third in 1987. A sub class, called the Engin de débarquement ateliers or EDA was constructed between the first and second groups but were fitted out as repair craft. In French service, they predominantly were used in the French Pacific territories.

<i>Atrevida</i>-class corvette

The Atrevida class was a class of six corvettes built for the Spanish Navy in the 1950s.

Spanish Civil War Republican ship classes is a list of ship classes used by the Spanish Republicans during the Spanish Civil War.

Audaz was a Spanish destroyer of the class of the same name that was built after the Second World War. Audaz was launched in 1951 and completed in 1953. The ship was modified to an anti-submarine escort in the 1960s, and was stricken in 1974.

References