DSR-1 | |
---|---|
Type | Sniper rifle |
Place of origin | Germany |
Service history | |
Used by | See Users |
Production history | |
Designer | Ingolf Reuter |
Manufacturer | DSR-precision GmbH |
Produced | Since 2000 |
Variants | DSR-1 Subsonic (7.62×51mm NATO) DSR-50 Sniper Rifle (.50 BMG) |
Specifications | |
Mass | 5.9 kg (13.01 lb) (unloaded, without scope) |
Length | 990 mm (38.98 in) |
Barrel length | 650 mm (25.59 in) |
Cartridge | .308 Winchester .300 Winchester Magnum .338 Lapua Magnum |
Action | Bolt-action |
Effective firing range | 800 m (875 yd) (.308 Winchester) 1,100 m (1,203 yd) (.300 Win. Mag.) 1,500 m (1,640 yd) (.338 Lap. Mag.) |
Feed system | 5-round magazine |
Sights | Quick-detachable optical sights |
The DSR-1 is a compact bolt-action sniper rifle designed, manufactured and marketed by the German company DSR-Precision GmbH and was (until 2004) also marketed by the German company AMP Technical Services as a specialized sniper rifle for police sharpshooters. It has been adopted by the German counter-terrorist unit GSG 9, as well as by other European special police units and agencies.
The DSR-1 system is configured in a bullpup design, with a free-floating barrel. The rifle features a fully adjustable rear stock and cheek piece. The holder for a spare magazine is installed in the front of the trigger guard to decrease reloading time. The DSR-1 action features a benchrest match-grade, fluted barrel that is quickly interchangeable and is fixed into the receiver by three screws. The bolt features six lugs that lock directly into the barrel. The barrel is protected by a ventilated aluminium handguard and is fitted with a muzzle brake (which is very useful when firing full-power, magnum loads). The trigger is two-stage and adjustable. The DSR-1 features a manual, ambidextrous three-position safety, located above the trigger guard. For the standard version of the DSR-1 a tactical suppressor is available. The suppressor is designed to be used with high power ammunition of the DSR-1 chamberings. This suppressor effectively suppresses the muzzle blast. Naturally it cannot suppress the crack of a supersonic projectile but the direction where the bullet comes from is effectively concealed. The tactical suppressor is easily mounted in seconds on the muzzle brake using a quick release lever.
The Gutman gun magazine Visier published an article in October 2003 edition, regarding their performed test shoots with a DSR-1 to get an indication of its accuracy potential with factory ammunition.
.308 Winchester cartridge type | 100 m group (mm) | 100 m group (MOA) | 300 m group (mm) | 300 m group (MOA) |
RUAG Swiss P Target 168 gr HP-BT | 13 | 0.45 | 48 | 0.55 |
Federal GM 168 gr Sierra MatchKing | 14 | 0.48 | 55 | 0.63 |
Sellier & Bellot 168 gr HP-BT | 15 | 0.51 | 52 | 0.59 |
IMI 168 gr Match | 13 | 0.44 | 52 | 0.59 |
.300 Winchester Magnum cartridge type | 100 m group (mm) | 100 m group (MOA) | 300 m group (mm) | 300 m group (MOA) |
RUAG Swiss P Target 200 gs HP-BT | 13 | 0.45 | 38 | 0.43 |
Sellier & Bellot 168 gr HP-BT | 14 | 0.48 | 45 | 0.51 |
Sako 168 grs HP-BT | 14 | 0.48 | 30 | 0.34 |
The 5-shot groups were obtained by test shooters whilst shooting from the bipod and measured from centre to centre. The table shows that with target factory ammunition the DSR-1 performs in the 0.34 - 0.63 MOA region. Whether the DSR-1 can perform better under ideal environmental conditions with handloads tailored to the particular rifle and/or if the human test shooters were a limiting factor was not tested by Visier magazine. An article on the DSR-1 in the French gun magazine Armes & Tir November 2001 edition corroborates the German Visier results. The Armes & Tir test shooters used RUAG target cartridges and could shoot 200 x 300 mm (0.69 x 1.03 MOA) groups at 1,000 m distance with a .338 Lapua Magnum chambered DSR-1 rifle.
The DSR-1 Subsonic is a variant optimized for 7.62×51mm NATO/.308 Winchester subsonic ammunition usage. The barrel length is reduced to 310 mm. The 8 inch twist rate of the barrel is especially adapted to stabilize the long heavy projectiles used in subsonic ammunition. The propellant charge of subsonic ammunition is reduced to keep the bullet velocity (300–320 m/s (980–1,050 ft/s) below the speed of sound (~ 340 m/s (1,100 ft/s)). At this subsonic speed the supersonic crack that arises when standard ammunition is fired is avoided. The manufacturer recommends exclusive use of subsonic ammunition for the DSR-1 Subsonic.
The DSR-50 Sniper Rifle is an enlarged variant of the DSR-1. It has an integrated hydraulic recoil damping system in the buttstock and an integral muzzle brake. The forward-venting muzzle brake, also described as a linear compensator, reduces the perceived muzzle blast. The DSR-50 Sniper Rifle is chambered for the .50 BMG (12.7×99mm NATO) cartridge that is significantly larger than the .338 Lapua Magnum cartridge, which is the biggest available chambering for the DSR-1 rifle. Sniper rifles chambered in .50 BMG are often employed as anti-materiel rifles.
A sniper rifle is a high-precision, long-range rifle. Requirements include high accuracy, reliability, and mobility, concealment, and optics, for anti-personnel, anti-materiel and surveillance uses by military snipers. The modern sniper rifle is a portable shoulder-fired rifle with either a bolt action or semi-automatic action, fitted with a telescopic sight for extreme accuracy and chambered for a high-ballistic performance centerfire cartridge.
The M24 Sniper Weapon System (SWS) or M24 is the military and police version of the Remington Model 700 rifle, M24 being the model name assigned by the United States Army after adoption as their standard sniper rifle in 1988. The M24 is referred to as a "weapon system" because it consists of not only a rifle, but also a detachable telescopic sight and other accessories.
The .338 Lapua Magnum is a Finnish rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. Due to its use in the War in Afghanistan and the Iraq War, the cartridge has become widely available.
The Accuracy International AWM is a bolt-action sniper rifle manufactured by Accuracy International designed for magnum rifle cartridges. The Accuracy International AWM is also unofficially known as the AWSM, which typically denotes AWM rifles chambered in .338 Lapua Magnum.
The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have features that improve performance in extremely cold conditions without impairing operation in less extreme conditions.
The Barrett M82 is a recoil-operated, semi-automatic anti-materiel rifle developed by the Australian-owned company Barrett Firearms Manufacturing and produced in the United States.
The PGM 338, also known as the PGM .338 LM or PGM Mini-Hecate .338, is French sniper rifle from the early 1990s. It uses the .338 Lapua Magnum (8.6×70mm) cartridge, which remains supersonic up to a range of 1200–1500 m depending on the exact ammunition type and environmental conditions.
The Bor is a Polish bolt-action 7.62×51mm NATO and .338 Lapua Magnum caliber sniper rifle. The weapon received the code name Alex during development, after the name of the lead designer Aleksander Leżucha, creator of the 12.7×99mm NATO Wilk anti-materiel rifle. After the development phase, the rifle received the military designation 'Bor'.
The SV-98 is a Russian bolt-action sniper rifle designed by Vladimir Stronskiy. In 2003 special operations troops were armed with the 7.62 mm 6S11 sniper system comprising the SV-98 sniper rifle and 7N14 sniper enhanced penetration round. The rifle has been used in combat during operations in Chechnya and Ukraine.
The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. It is the successor to the SAKO TR-6 target rifle, and thus the letter G within the rifle's name is meant to represent number 7.
The Desert Tech Stealth Recon Scout (SRS) is a bolt-action sniper rifle developed by the Utah-based firearm manufacturer Desert Tech. It was unveiled at the 2008 SHOT Show. It is known for its bullpup design.
The 6.5mm Creedmoor (6.5×48mm), designated 6.5 Creedmoor by SAAMI, 6,5 Creedmoor by the C.I.P. is a centerfire rifle cartridge introduced by Hornady in 2007. It was developed by Hornady senior ballistics scientist Dave Emary in partnership with Dennis DeMille, the vice-president of product development at Creedmoor Sports, hence the name. The cartridge is a necked-down modification of the .30 Thompson Center.
The APR is a bolt-action sniper rifle designed by the Thun-based Brügger & Thomet in 2003 as an evolution of the French PGM Précision.
The DSR-Precision DSR-50 is a bullpup bolt-action anti-materiel rifle developed and manufactured by DSR-Precision GmbH and chambered in .50 BMG. It is essentially an upscaled DSR-1.
The C14 Timberwolf MRSWS is a bolt-action sniper rifle built by the Canadian arms company PGW Defence Technologies Inc. In 2005 they won the contract to supply the Canadian Forces Land Command with the C14 Timberwolf MRSWS for $4.5 million.
The PGM Ultima Ratio is a French-designed and manufactured sniper rifle. It uses the 7.62×51mm NATO cartridge but depending on the barrel variant can also be chambered for several other cartridges. The PGM Ultima Ratio is intended to fulfill an anti-personnel role and is produced by PGM Précision of France. Its main commercial competitors/equivalents on the high-end factory sniper rifle market are the Accuracy International Arctic Warfare and Sako TRG product lines. All of these rifles are similar in performance.
The .338 Norma Magnum is a cartridge first introduced in 2008 and came into production in 2009, designed by Norma of Sweden.
The Savage 110 BA is a bolt-action sniper/tactical rifle manufactured by Savage Arms. The rifle is designated with an "LE" code; "Law Enforcement". All 110 BA series rifles are configured with AccuTrigger, matte-blued barreled action, fluted heavy free-floating barrel, muzzle brake, oversized bolt handle, external box magazine, magpul adjustable stock, adjustable pistol grip, and three swivel studs for sling and bipod mounting.
The Pindad SPR is a family of sniper rifles made by Pindad. The gun allows the shooter to adjust the height of the position and stability by regulating the bipod of the rifle located on the bottom front of the handguard.
The ShAK-12, originally under the name ASh-12.7 battle rifle is a dedicated CQB/Urban Operations weapon, developed by TsKIB SOO, a subsidiary of the KBP Instrument Design Bureau of Tula, Russia, by request from the Russian Federal Security Service (FSB). The weapon was designed with extreme short-range stopping power in mind for FSB urban combat units. According to the Russian press, the first batch of ShAK-12 battle rifles were delivered to the FSB in late 2011.