Daimler Regency Series | |
---|---|
Overview | |
Manufacturer | The Daimler Company Limited |
Production | 1951–1958 |
Body and chassis | |
Class | Luxury |
Body style | Four-door saloon bodies by Barker or Empress body by Hooper or Special Sports DF302 convertible by Barker |
Powertrain | |
Engine | 2952, 3468 or 4617 cc inline six-cylinder |
Transmission | 4-speed preselector gearbox with fluid flywheel |
Dimensions | |
Wheelbase | 114 in (2,896 mm) [1] |
Length | 195 in (4,953 mm) [1] |
Width | 70 in (1,778 mm) [1] |
Height | 62.5 in (1,588 mm) [1] |
Kerb weight | 2,000 kg (4,409 lb) |
Chronology | |
Predecessor | Daimler Consort (1949–53) |
Successor | Daimler Majestic (1958–62) |
3-litre engine | |
---|---|
Overview | |
Manufacturer | The Daimler Company Limited |
Production | 1951–52 |
Layout | |
Configuration | 6-cylinder in-line |
Displacement | 2,952 cc (180.1 cu in) |
Cylinder bore | 76.2 mm (3.00 in) |
Piston stroke | 107.95 mm (4.250 in) |
Cylinder block material | Cast iron |
Valvetrain | OHV pushrod cam-in-block |
Combustion | |
Fuel system | Twin S.U. carburettors |
Fuel type | Petrol supplied by AC mechanical pump |
Cooling system | Water pump and fan, thermostatically controlled |
Output | |
Power output | 90 bhp (67 kW; 91 PS) @ 4,100 rpm |
Chronology | |
Predecessor | 2-litre four-cylinder Lanchester Fourteen |
Successor | 3½-litre and 4½-litre variants (211.6 cu in) and (281.7 cu in) |
3½-litre engine | |
---|---|
Overview | |
Manufacturer | The Daimler Company Limited |
Production | 1954–58 |
Layout | |
Configuration | 6-cylinder in-line [2] |
Displacement | 3,468 cc (211.6 cu in) [2] |
Cylinder bore | 82.5 mm (3.25 in) [2] |
Piston stroke | 107.95 mm (4.250 in) [2] |
Cylinder block material | Cast iron |
Cylinder head material | Cast iron (Regency) Aluminium alloy (One-O-Four) |
Valvetrain | OHV pushrod cam-in-block [2] |
Compression ratio | 6.5:1 (Regency) [2] 7.6:1 (One-O-Four) |
Combustion | |
Fuel system | Twin S.U. horizontal carburettors [2] |
Fuel type | Petrol supplied by AC mechanical pump [2] |
Oil system | Submerged gear type pump, Tecalemit full-flow oil filter with safety by-pass [2] |
Cooling system | Water pump and fan, thermostatically controlled [2] |
Output | |
Power output | 107 bhp (80 kW; 108 PS) @4,000 rpm (Regency) [2] 137 bhp (102 kW; 139 PS) @4,400 rpm (One-O-Four) |
Chronology | |
Predecessor | 3-litre Regency engine |
Successor | 3.8-litre Daimler Majestic engine |
The Daimler Regency series was a luxury car made in Coventry by The Daimler Company Limited between 1951 and 1958. Only an estimated 49 examples of the 3-litre Regency chassis were made because demand for new cars collapsed just weeks after its introduction. Almost three years later in October 1954, a lengthened more powerful Regency Mark II (DF304) was announced but, in turn, after a production run of 345 [3] cars, it was replaced by the very much faster, up-rated One-O-Four (DF310), announced in October 1955.
Displayed to the press on 26 September and the following week at the Paris Motor Show, it was first shown to the British public at the October 1951 Motor Show. [4] The DF300 model designation was used for right-hand drive and DF301 for left-hand drive. The chassis included a number of new developments from the Daimler Consort which was still in production. The engine was moved well forward, the ground clearance increased by one inch and the chassis side members lowered. It was fitted with a new 3-litre 6 cylinder engine derived from the 4 cylinder 2-litre engine in the production Lanchester Fourteen. Twin SU carburettors were fitted to give 90 bhp at 4,100 rpm. [5]
The shape of the standard Barker saloon body closely resembled the much smaller Lanchester Fourteen, except that the headlights were fitted into the mudguards in the same position as the Daimler Consort. It was joined in 1952 by an Empress II saloon, limousine and convertible, all with razor-edge styling by Hooper.
Only a small number of Regency Barker Special Sports were made, perhaps three. They were externally distinguished by having front-hinged doors, not the "suicide doors" of the smaller-engined version. The usual Daimler Fluid Flywheel coupled the engine and its Wilson pre-selector 4-speed gearbox.
All new car sales collapsed in 1952 while the nation waited for the removal of a "temporarily" increased purchase tax, finally eased in April 1953. Including Empress models, an estimated 49 3-litre cars were produced [6] before production stopped. [7]
Source: [6]
Model | Numbers allocated | Notes |
---|---|---|
DF300/1 | 57000-57009 | Pre-production prototypes chassis number allocation. Two were Hooper Empress models. 57009 was not built. [6] |
DF300/1 | 80000-80007 | Production 3-litre Regency standard steel saloon, except for 80002 which was an Empress. |
Of the DF300/1 chassis produced (excluding DF302/3), it is believed that only three have survived into the 21st century. [8]
57001 | A pre-production prototype converted to a pickup and used as a factory runaround. |
80002 | Built as a Hooper Empress. |
80005 | Standard production saloon. Formerly owned by HM the Queen Mother. [6] |
As per company policy at the time, pre-production chassis were either dismantled or retained as factory runarounds. [8]
A Hooper Empress Mark II was first exhibited at Earls Court in 1952 (chassis 82002). Hooper produced 33 examples, plus one on a standard 3-litre chassis (80002). Power was boosted to 100 bhp at 4,400 rpm by using an aluminium cylinder head and a higher 7.5 to 1 compression ratio. [9]
Note that Lady Docker's October 1953 Earls Court Motor Show car Silver Flash was listed in Hooper records as a 3-litre chassis, but with chassis number 85001. This was a Lanchester Fourteen chassis modified to fit a Daimler 6-cylinder engine. [10]
Source: [6]
Model | Number | Notes |
---|---|---|
DF302 | 82000-82027 | Right-hand drive Hooper Empress Mark II, except for 82001 a coupe and 82008 a fixed-head coupe. [6] All Empress Mark IIs were six-light 4-door saloons, except for two four-light 2-door examples on chassis numbers 82006 and 82007. [11] |
DF303 | 82400-82404 | Left-hand drive Hooper Empress Mark II. Four cars only as 82402 was not built. [6] |
It is thought that about half of all 3-litre Empress Mk II models survive. [6] Both 2-door examples survived into the 21st century. [11]
The revised Regency DF304 labelled Mark II was announced in October 1954. Left-hand-drive cars used the DF305 designation. The new more flowing body was slightly longer with a much longer boot and mudguards and was lower-set. It could now be purchased with a 3½-litre or 4½-litre engine. Again there was a Hooper version, the Empress IIa and III but now also the Sportsman four-light saloon with coachwork by Mulliners (Birmingham). [12] The (at first only) 4½-litre Sportsman with three-piece wrap-around rear window and extra interior luxury features was announced a few days later [13]
The revised chassis was again made of box section steel and was cruciform braced. The side members rose over the rear axle and were not underslung like the Consort. The suspension was independent at the front using coil springs but retained traditional leaf springs and live axle at the rear. Automatic chassis lubrication continued to be fitted, operating "thermostatically every time the engine warm(ed) up", and the propeller-shaft centre bearing was "prepacked with grease" so did not require lubrication. [15] However, the propeller shaft itself was not served by the system and four grease points required "attention every 1,000 miles". [15] Marles worm and double roller steering was used. [1] Brakes were Girling hydro-mechanical – hydraulic at front, mechanical to the rear – as was standard Daimler practice at that time on the Consort, Conquest and Lanchester Fourteen.
These examples had a chassis designation of DF400 (DF401 for LHD). The 4½-litre engine was offered as an option on the Regency Mark II chassis, but very few were fitted. The car differed from the 3½-litre DF304 in that a 4-speed pre-selector gearbox was fitted with direct drive in 3rd gear and an overdrive 4th gear. In addition, the DF304's Girling hydro-mechanical brakes were replaced with a fully hydraulic system with vacuum assist. [16] After an engine upgrade from 127 to 167 bhp in 1956, the increased torque proved to be too much for the pre-selector gearboxes, so very few 4½-litre cars survived. Plans for deliveries of further 4½-litre chassis were cancelled and most existing cars were recalled and converted to 3½-litre engines. Ultimately, the 4½-litre engine was restricted to the DK400 chassis. [17] [18]
The British Motor magazine tested a 3468 cc Regency II saloon in 1955 recording a top speed of 82.8 mph (133.3 km/h) and acceleration from 0-60 mph (97 km/h) in 22.7 seconds and a fuel consumption of 15.7 miles per imperial gallon (18.0 L/100 km; 13.1 mpg‑US). The test car cost £2324 including taxes. [1]
A spacious interior married with "an abundance of polished hardwood, not only for the facia but also for the door cappings, a floor .... covered with thick pile carpet" and the car's driving qualities will have attracted admiration, but purchase tax on cars was high and in 1954 the UK manufacturer-recommended retail price, including tax, for the standard bodied 3½-litre Daimler Regency was £2,324. [19] That price included a heater, but customers requiring a radio to be fitted would need to find another £48. [19] In the same year Jaguar's recommended UK retail price for the similarly sized (and very effectively promoted) Mark VII was £1,680. [20] (Jaguar buyers also received the heater included in the price, though they were obliged to find an extra £50 for a radio.) The price differential is probably enough to explain why relatively few Daimler Regency models found buyers but it should be pointed out that the Daimler was a much more substantial and durable product assembled with much greater care than Jaguars of that same day and aimed at quite different customers.
The total chassis allocation was 395 units, but as noted not all may have been built. Standard production is thought to be 345 cars, allowing for chassis reallocation when some were fitted with the higher performance engine in late Regency Mark II production. 58 chassis were allocated for specialist coachwork, e.g. Hooper Empress Mark IIa and III. These incorporated a number of minor improvements over the DF304 chassis. [21]
Model | Numbers allocated | Notes |
---|---|---|
DF304/5 | 88000-88010 | Prototype chassis allocation. |
DF304/5 | 88250-88633 | Production 3½-litre standard steel saloon. It is believed that 39 numbers were reallocated to One-O-Four chassis numbers when the higher performance engine became available. [3] |
DF306/7 | 91450-91474 | Upgraded chassis for Empress Mark IIa and other specialist coachwork. [22] |
DF308/9 | 91475-91507 | Sportsman and Empress Mark III. [22] |
The Regency Mark II proved more successful than the first Regency, but after a short production run of only one year it was superseded in October 1955 [23] by the 3½-litre One-O-Four (DF310) with a more powerful engine and various other upgrades. [24] [25] While the top speed of the One-O-Four was tested at 102 mph compared to the Regency's 85 mph, the Regency actually had faster acceleration up to 50 mph. Standing quarter mile times for the One-O-Four were unchanged from the Regency. However when the automatic gearbox became available for the One-O-Four, the standing quarter mile was actually 2 full seconds slower than the Regency. [26]
Announced in October 1955 [23] the 3½-litre engine was given a new cylinder head and compression ratio of 7.6:1 generating almost 30% more power (137 bhp (102 kW; 139 PS) @ 4,400 rpm) to push the same 2-tonne Mk II to 104 m.p.h. [27] With upgraded brakes and interior, branded with a fluted boss bearing a large D in the centre of its back bumper, it was advertised as the 100 m.p.h. Daimler One-O-Four, when there were no open-road speed limits. The One-O-Four name refers to a prototype reaching the speed of 104 m.p.h. during testing. During 1956 a Borg-Warner fully automatic gearbox became available. [23] A One-O-Four Lady's Model was produced, finding only 49 customers. The special accessories in the Lady's Model inspired by Lady Docker became optional extras the following year. The One-O-Four was eventually replaced by the Daimler Majestic. When it first arrived in July 1958, [28] the Majestic replaced the automatic One-O-Four. If customers wanted the pre-selector gearbox, they could still choose a One-O-Four. No more than 559 One-O-Fours of all models were produced before production ended in 1958. The car did not appear at the 1958 Earl's Court motor show. [29]
Model [3] | Numbers allocated | Notes |
---|---|---|
DF310/1 | 88700-89057 | One-O-Four model. |
DF310/1 | 90000-90016 | One-O-Four model. |
DF310/1 | 96850-96898 | One-O-Four Lady's Model. |
DF314/5 | 90100-90234 | One-O-Four with automatic transmission. |
Numerous upgrades to the Regency Mark II were incorporated into the Daimler One-O-Four. The following is a summary of the major changes. In addition, many minor changes were introduced. [30]
Part or assembly | Notes |
---|---|
Engine | Aluminium alloy cylinder head. Compression ratio increased from 6.5 to 7.6. Quick-lift camshaft. Diaphragm type SU carburettors. Power raised from 107 bhp (80 kW; 108 PS)@4,000 rpm to 137 bhp (102 kW; 139 PS)@4,400 rpm. |
Gearbox | A fully automatic Borg-Warner gearbox option became available in the autumn (fall) of 1956. [31] |
Brakes | Fully hydraulic brakes with vacuum assist replaced hydro-mechanical brakes. |
Hand brake | On floor between door and driver's seat. |
Steering box | The Regency's Marles steering box was replaced by a Burman unit. [30] |
Rear axle | Ratio raised from 4.3 to 3.92 or optionally 3.64. |
Hub caps | Flatter hub caps fitted replacing the Consort style ones on the Regency. |
Body | Pressed steel A and B door pillars replaced the Regency's cast pillars. |
Windows | Electric window option available. [30] |
Trafficators | The Regency Mark II's turn signals controlled by a flasher unit were replaced with Trafficators in the body B pillar, except for DF311 USA imports. [30] |
The Daimler Company Limited, before 1910 known as the Daimler Motor Company Limited, was an independent British motor vehicle manufacturer founded in London by H. J. Lawson in 1896, which set up its manufacturing base in Coventry. The company bought the right to the use of the Daimler name simultaneously from Gottlieb Daimler and Daimler-Motoren-Gesellschaft of Cannstatt, Germany. After early financial difficulty and a reorganisation of the company in 1904, the Daimler Motor Company was purchased by Birmingham Small Arms Company (BSA) in 1910, which also made cars under its own name before the Second World War. In 1933, BSA bought the Lanchester Motor Company and made it a subsidiary of the Daimler Company.
The Lanchester Motor Company Limited was a British car manufacturer in active trade between 1899 and 1955. Though the Lanchester Motor Company Limited is still registered as an active company and accounts are filed each year, the marque has been dormant since. As of 2014 it is marked as "non-trading".
Morris Oxford is a series of motor car models produced by Morris of the United Kingdom, from the 1913 bullnose Oxford to the Farina Oxfords V and VI.
The Jaguar Mark 2 is a mid-sized luxury sports saloon built from late 1959 to 1967 by Jaguar in Coventry, England. The previous Jaguar 2.4 Litre and 3.4 Litre models made between 1955 and 1959 are identified as Mark 1 Jaguars.
The Armstrong Siddeley Sapphire is a large automobile which was produced by the British company, Armstrong Siddeley Motors Limited, from 1952 to 1960.
The Daimler 2.5 V8/V8-250 is a four-door saloon which was produced by The Daimler Company Limited in the United Kingdom from 1962 to 1969. It was the first Daimler car to be based on a Jaguar platform, the first with a unit body, and the last to feature a Daimler engine after the company was bought from the Birmingham Small Arms Company by Jaguar Cars in 1960. The engine is the hemispherical head V8 designed by Edward Turner and first used in the Daimler SP250 sports car.
The Bentley Mark VI is an automobile from Bentley which was produced from 1946 until 1952.
The Daimler SP250 is a sports car built by the Daimler Company, a British manufacturer in Coventry, from 1959 to 1964. It was the last car to be launched by Daimler before its parent company, the Birmingham Small Arms Company (BSA), sold it to Jaguar Cars in 1960.
The Daimler Majestic Major DQ450 is a large luxury saloon produced by Daimler in Coventry, England between November 1960 and 1968. It was fitted with a 4,561 cc V8 engine and was offered as a much more powerful supplement to their then current Daimler Majestic.
The Daimler Majestic DF316/7 and DF318/9 luxury saloon was launched by the Daimler Company of Coventry in July 1958 and was in production until 1962. Edward Turner had been appointed Chief Executive of BSA Automotive in 1957 and promised new products, this car was to carry his new V8 engine still under development. The six-cylinder, four-door saloon, with new three-speed Borg Warner automatic transmission, power steering and vacuum-servo assisted four-wheel disc brakes was mechanically up-to-date for its time, but it had a heavy coachbuilt body of outdated construction on a separate chassis which kept the car's mass well above more modern designs and made it difficult to manoeuvre, despite the modern steering. The styling was already becoming outdated when the car appeared and became increasingly dated as lighter cars with monocoque construction appeared during the Majestic's production run.
The Daimler Conquest is an automobile which was produced by The Daimler Company Limited in the United Kingdom from 1953 to 1958. Based on the Lanchester Fourteen, the Conquest replaced the Daimler Consort. Sales were affected by increasing prices and by the fuel shortage caused by the Suez Crisis, and production ended by January 1958, before a replacement model was in production.
The Humber Hawk is a four-cylinder automobile manufactured from 1945 to 1967 by British-based Humber Limited.
The Jaguar Mark 1 is a British saloon car produced by Jaguar between 1955 and 1959. It was referred to in contemporary company documentation as the Jaguar 2.4 Litre and Jaguar 3.4 Litre. Its designation as Mark 1 was retroactive, following its October 1959 replacement by Jaguar's 2.4-litre Mark 2. The 2.4 Litre was the company's first small saloon since the end of its 1½ and 2½ Litre cars in 1949, and was an immediate success, easily outselling the larger much more expensive Jaguar saloons.
The Sunbeam-Talbot 90 is an automobile which was produced and built by Sunbeam-Talbot from 1948 to 1954 and continued as the Sunbeam Mk III from 1954 to 1957.
The Daimler DK400, originally Daimler Regina DF400, was a large luxury car made by The Daimler Company Limited between 1954 and 1959 replacing their Straight-Eight cars. Distinguished, after the Regina, by its hooded headlights it was Daimler's last car to use their fluid flywheel transmission.
The Rover 12 was a name given to several medium-sized family cars from the British Rover car company between 1905 and 1948.
The Daimler DB18 is an automobile produced by Daimler from 1939 until 1953. It is a 2½-litre version of the preceding 2.2-litre New Fifteen introduced in 1937. From 1949, the DB18 was revised to become the Daimler Consort.
Daimler Double-Six piston engine was a sleeve-valve V12 engine manufactured by The Daimler Company Limited of Coventry, England between 1926 and 1938 in four different sizes for their flagship cars.
The Lanchester Ten and Lanchester Eleven were sold by The Lanchester Motor Company Limited from the Ten's announcement in September 1932 until 1951. Quite different from previous Lanchesters, the Ten was the second of Lanchester's new owner's new Daimler-linked Lanchester range. The names Ten and Eleven referred to the engine's rating for the annual tax and did not relate to the engine's power output.
The Lanchester Fourteen Roadrider is a six-cylinder automobile introduced by the Lanchester Motor Company in the beginning of September 1936. It was named "Roadrider" for its special suspension features, and billed as the lowest-priced six-cylinder Lanchester ever offered. This car replaced the previous 12 hp Light Six model with a larger six-cylinder engine again in the Lanchester Eleven chassis and body.
To reduce the need for maintenance, automatic chassis lubrication is provided thermostatically every time the engine warms up. The propeller-shaft is not served by this system, and four points require attention every 1,000 miles (1609 km). The propeller-shaft bearing, however, is prepacked with grease and does not require lubrication.